User's Manual

Call Functions and Contacts List 75
Adjusting Noise Reduction
During a call it may be necessary to adjust the noise
reduction feature. Activating this feature can improve the
quality of your conversation by reducing ambient noise.
1. Tap
( Noise reduction off ) to toggle the status
and activate the feature.
2. Tap
( Noise reduction on ) to toggle the status
and deactivate the feature.
Placing a Call on Hold
You can place the current call on hold whenever you want. If
your network supports this service, you can also make
another call while a call is in progress.
To place a call on hold:
1. Tap Hold to place the current call on hold.
2. Tap
Unhold to activate the call that is on hold.
To make a new call while a call is in progress:
1. Enter the new phone number that you wish to dial or
look it up in Call history.
2. Once connected, tap
Add call to dial the second call.
3. Dial the new phone number and tap .
To switch between the two calls:
 Tap Swap .
The previous In call number turns gray and displays
On hold. The new active call displays a green
background behind the number.
Turning the Speakerphone on and off
While on a call, you can use your Speakerphone by following
these steps:
1. Tap (
Speaker off ) to toggle the speakerphone on.
2. Tap (
Speaker on ) to toggle the speakerphone off.
Tip: When the speaker is turned On , the color of the speaker is
green. When the speaker is turned
Off , the color of the
speaker is white.
Muting a Call
1. Tap ( Mute off ) to turn mute on so the other caller
cannot hear you speaking.
2. Tap (
Mute on ) to turn mute off and resume your
conversation.
Speaker
Speaker
Mute
Mute