User's Manual

124
Portable Wi-Fi Hotspot
This feature allows you to turn your device into a Wi-Fi hotspot.
The feature works best when used in conjunction with HSPA+
(4G) data services (although 3G service can also be used).
Important!:
The Mobile AP service can not be active at the same time as
Wi-Fi. Please close your Wi-Fi connection prior to launching the
Mobile AP service.
Note:
You must have a tethering plan on your account to use the Wi-Fi
hotspot. You can not use data on the device while it is being used as a
hotspot.
To activate the Portable Wi-Fi Hotspot service:
1. From a Home screen, tap (
Apps
)
(
Settings
)
Wireless and networks
Tethering and portable hotspot
.
2. Tap
Portable Wi-Fi hotspot
. This places a checkmark in the
adjacent field to activate the service.
3. If prompted, tap
Yes
to continue with the activation.
4. Tap
Configure portable Wi-Fi hotspot
.
5. Create a new Network SSID name and then write it down.
6. Select a Security option (
Open
or
WPA-PSK
) then tap
Save
.
7. Confirm the Mobile AP service icon appears at the
bottom of the screen.
Note:
By default, the connection is open and not secured. It is recommended
that you access the Portable Wi-Fi Hotspot settings and create a
secure connection by using a password for communication.
Note:
Using your 4G service and Portable Wi-Fi Hotspot drains your device’s
battery at a much faster rate than when using any other feature
combination.
The best way to keep using the device as a hotspot is to have it
connected to a power supply.
To connect to the Hotspot:
1. Enable Wi-Fi (wireless) functionality on your target device
(laptop, media device, etc.).
2. Scan for Wi-Fi networks from the device and select your
device hotspot from the network list.
The SSID name for your devices hotspot is determined by what you
entered into the
Network SSID
field.
You can change the name by tapping
Configure portable Wi-Fi
hotspot
Network SSID
and changing the entry.
3. Select this Hotspot and follow your on-screen instructions
to complete the connection.