User Guide

68
Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your device searches for available
Wi-Fi connections, then displays them on screen.
1. From the Home screen, touch
Apps ➔
Settings ➔ Wireless and networks ➔ Wi-Fi
Settings
.
2. Touch
Wi-Fi to turn Wi-Fi On. When on, a check
appears in the checkbox.
3. Your device automatically scans for nearby Wi-Fi
networks and displays them. Touch a Wi-Fi network to
connect.
4. If the Wi-Fi network is open, you will be automatically
connected. If the Wi-Fi network is secured, enter the
password at the prompt to connect.
Adding a Wi-Fi Network Manually
1. From the Home screen, touch Apps ➔
Settings ➔ Wireless and networks ➔ Wi-Fi
settings
.
2. Touch
Wi-Fi to turn Wi-Fi On or Off. When on, a check
appears in the checkbox.
3. Your device automatically scans for nearby Wi-Fi
networks and displays them. Below the list of
networks, touch
Add Wi-Fi network , then enter these
fields:
• Network SSID : Enter the name of the Wi-Fi Wireless Access
Point.
• Security : Select the type of security used by the WAP.
– If Security is Open, continue to set the Proxy settings (optional)
and IP settings (optional).
– If Security is WEP, WPA/WPA2 PSK, or 802.1x EAP, enter the
Password and continue to set the Proxy settings (optional) and IP
settings (optional).