Operation Manual

Basics
13
Turning the device on and off
Press and hold the Power key for a few seconds to turn on the device.
Before turning on your device for the first time, you must connect the device to a
power supply.
When you turn on your device for the first time or after performing a data reset, follow the on-
screen instructions to set up your device.
To turn off the device, tap
→
Power
→
Shut down . In Tablet mode, tap
→
Shut down .
Alternatively, press and hold the Power key until
Slide to shut down your PC appears, and
then drag the screen downwards.
Follow all posted warnings and directions from authorised personnel in areas where
the use of wireless devices is restricted, such as aeroplanes and hospitals.
Restarting the device
If your device is frozen and unresponsive, press and hold the Power key for more than
10 seconds until the device turns off. Then, press and hold the Power key again to restart it.
Keyboard Cover
Introduction
Connecting the device to the Keyboard Cover allows you to use a traditional keyboard and
touchpad. The touchpad has two click buttons so you can use the touchpad like a mouse. You
can also stand your device upright using the stand on the Keyboard Cover.
When you close the Keyboard Cover, your device will enter sleep mode. When you open the
cover and set the device in position using the stand, the touchscreen will turn on. To change
the settings, tap
→
Settings
→
System
→
Power & sleep
→
Additional power settings
→
Choose what closing the lid does , and then configure the When I close the lid: settings.