User Manual Please read this manual before operating your device and keep it for future reference.
Table of Contents Support........................................................................... 2 Read me first................................................................. 3 Health and Safety Warnings................................... 3 Wearing the Gear VR for S6.................................. 4 Before Using the Gear VR for S6 Headset.......... 4 About the Gear VR for S6...................................... 5 Additional Notifications............................................
Support Warning! This product contains chemicals known to the State of California to cause cancer and reproductive toxicity. For more information, please call 1-800-SAMSUNG (726-7864). This guide provides you with the information you need to get started. For more information and additional support, please visit the main www.samsung.com support page. • Get support for your Gear VR for GALAXY S6 online. • Review your Gear VR for S6’s troubleshooting FAQs, and solutions.
Read me first Please read this guide before using the Gear VR for S6 to ensure safe and proper use. The Gear VR for S6 is an Innovator Edition device intended specifically for developers and early adopters of technology. The Gear VR for S6 does not require charging. • Descriptions in this guide are based on the mobile device’s default settings. Important: Use the Gear VR for S6 for its intended purpose only. Using the Gear VR for S6 for other purposes may result in injury.
Wearing the Gear VR for S6 Warning! Do not wear glasses when using the Gear VR for S6. Doing so may cause facial injuries. If you have poor eyesight, we recommended wearing contact lenses when using the Gear VR for S6. Note: Keep the lenses clean and protect them from getting scratched. If the lenses get dirty or steam up, clean them with the lens cleaning cloth. Caution: The Gear VR for S6 can be affected by magnetic interference created by items, such as computers, TVs, or electric cables.
• Do not use the Gear VR for S6 if you have symptoms of squint, amblyopia, or anisometropia. Using the Gear VR for S6 may aggravate these symptoms. • Do not use the Gear VR for S6 when the attached mobile device is hot as this may cause burns. To prevent any injuries, take frequent breaks when using the Gear VR for S6. • Make sure the Gear VR for S6 is level and secured comfortably on your head, and that you see a single, clear image.
Additional Notifications • The GALAXY S6 may become hotter than normal when used with the Gear VR for S6, especially if you use the devices to play games for an extended period. When the Gear VR for S6 detects a high temperature, the quality of the application may be degraded or VR applications may be terminated in order to prevent overheating. This is normal and does not affect the GALAXY S6’s lifespan or performance.
This product contains chemicals known to the State of California to cause cancer and reproductive toxicity. For more information, please call 1-800-SAMSUNG (726-7864). Samsung Electronics America (SEA), Inc Address: 85 Challenger Road Ridgefield Park, New Jersey 07660 Phone: 1-800-SAMSUNG (726-7864) Internet Address: www.samsung.com ©2015 Samsung Electronics America, Inc. Samsung is a registered trademark of Samsung Electronics Co., Ltd.
Device Functions Focus Adjustment Wheel USB Connector Fan Phone Lock Key Charging Port Lens Note: Ensure that the fan air inlet on the left side of the Gear VR for S6 is clean and unobstructed. The fan may make noise during operation. This is normal and does not affect the Gear VR for S6’s lifespan or performance. Factory lens protectors are pre-installed on the Gear VR for S6.
Focus Adjustment Wheel USB Connector Fan Phone Lock Key Charging Port Lens Note: When you are not wearing the Gear VR for S6, do not place objects on the internal proximity sensor. Doing so may cause the proximity sensor to remain on and drain the connected Samsung GALAXY S6’s battery.
Back Key Front Cover touchpad Volume Key Note: The connected Gear VR for S6 does not require charging because it obtains power from the GALAXY S6.
Function Overview Keys Back Function • Press to return to the previous screen. • Press and hold to access the Universal menu. You can view the status of the Gear VR for S6 and configure settings. Volume • Press to adjust the volume. Focus Adjustment Wheel • Rotate to focus by adjusting the distance between the Phone Lock Key • Press to separate the GALAXY S6 from the Gear VR for S6. Touchpad • Swipe across to move around the screen. • Tap or double-tap to make selections.
Device Installation and Set Up Install the straps 1. Insert each end of the main strap through a strap loop on the Gear VR for S6 (1) and use the velcro to fasten each end (2).
2. Carefully insert the hook (from the top head strap) into the front bar of the Gear VR for S6 (1), then pull it upward until it locks in place (2). The hook snaps when secured.
3. Slide the opposite end of the top head strap through the hole on the back of the main strap (3) and secure the velcro tip to the underside of the strap (4). This end of the strap contains a shorter velcro strip. 4 3 Note: The opposite end of this strap contains a longer velcro strip and is used to secure the top head strap to the front of the Gear VR for S6 frame.
Install the Mobile Device 1. Deactivate the screen lock feature on the Samsung GALAXY S6. 2. Press the Phone Lock key to release the latch and then remove the front cover. Note: The Gear VR for S6 is compatible only with the GALAXY S6 and the GALAXY S6 edge. 3. Carefully insert the mobile device (face down) at an angle and insert the Gear VR for S6 connector (1) into the mobile device’s USB port. This process is similar to installing the mobile device into a standard charging port.
4. Once securely connected, carefully push the opposite end of the mobile device downward (2) until the Phone Lock latch snaps onto the mobile device and secures it against the lenses. Important: Do not forcefully insert the connector into the mobile device as this may damage the connector. Improper installation can cause scratching on the mobile device. If it is not securely locked, the GALAXY S6 may accidentally separate from the Gear VR for S6 and be damaged.
Note: Verify that your device volume is not set to silent. If the sound is not emitted when you insert the connector into the GALAXY S6, the Gear VR for S6 may not have recognized the connection. Carefully reconnect the mobile device until you hear the sound. Beginning Gear VR for S6 Software Installation 1. When you connect the mobile device and the Gear VR for S6 for the first time, the mobile device notifies you with an audio message that you should remove it from the Gear VR for S6. 2.
Wearing the Gear VR for S6 1. Align your face and the foam cushion and put on the Gear VR for S6. Caution! Do not walk or drive while wearing the Gear VR for S6. Always be aware of your surroundings while using the Gear VR for S6 to avoid injury to yourself or others. 2. Secure the Gear VR for S6 to your head with the straps and place it comfortably over your face. 3. Adjust the length of the top head strap and the main strap.
Removing the Mobile Device Remove the mobile device from the Gear VR for S6 when you are not using it. ►► Take off the Gear VR for S6, press the Phone Lock key on the left side of the Gear VR for S6 and remove the connected mobile device. Then replace the front cover.
Connecting a Headset ►► Connect a headset/headphone to the currently connected mobile device’s headset jack. Note: You can connect a headset or a Bluetooth headset to the GALAXY S6 when using the Gear VR for S6. A headset is not supplied with the Gear VR for S6. For more information about connecting a Bluetooth headset, refer to the GALAXY S6’s user manual.
Using the Charger • You can connect the charger to the charging port on the Gear VR for S6. Note: Use only Samsung-approved USB cables and 2A power adapters. • If using the Gear VR for S6 while the charger is connected: ––It is powered by the charger and does not use the Samsung GALAXY S6’s battery. When using content that has high power demands (more than 1.5A) while the charger is connected, the Gear VR for S6 uses two power sources.
• The charger should remain close to the electric socket and easily accessible while charging. • Replace the front cover once you have finished using the Gear VR for S6. Note: For the safest experience always remain seated when using the Gear VR for S6. Take special care to ensure that you are not near other people, objects, stairs, balconies, windows, furniture,, or other items that you can bump into or knock down when using — or immediately after using—the Gear VR for S6 headset.
Replacing the Foam Cushion Over time and with normal use, the foam cushion deteriorates. Replace the foam cushion when necessary. Note: You can either replace the foam cushion if it deteriorates, or you can change it to another type of foam cushion that fits comfortably over your nose. 1. Place the Gear VR for S6 face down and carefully detach the previous foam cushion. 2. Carefully align the new foam cushion and press it onto the Gear VR for S6.
Caution! When you replace the foam cushion, grip the foam and velcro together firmly and remove it slowly so you will not deform or tear it. Do not use the Gear VR for S6 without the foam cushion. Without the foam cushion, the Gear VR for S6 may not sit properly on your face and may cause discomfort.
Installing Gear VR for S6 Software You must install the Gear VR for S6 software in order to use the Gear VR for S6. When you connect the GALAXY S6 to the Gear VR for S6 for the first time, the set up process automatically begins. Note: The setup process requires an active network or Wi-Fi connection. The Gear VR for S6 software files occupy some storage space on your GALAXY S6 device. 1. Unlock your GALAXY S6 and turn up the volume so you can hear the voice prompts. 2.
10. Follow the audio prompts. Make a selection. • Create an Account: To begin the process of creating a new Oculus account using your mobile device. • Log In: To enter your previously created Oculus account information. 11. If prompted, create a secured Oculus PIN and confirm your account password. 12. To complete the Oculus account registration, access the verification email and follow its’ instructions. 13. Read the OCULUS TERMS OF SERVICE and tap Agree and Continue. 14.
Completing the Set Up Process 1. Read the displayed Health & Safety Warning! information and then use your head to position the Pointer (crosshair) into the Oculus logo area to continue. 2. Follow the displayed instructions to learn how to: • Position your cursor at desired locations. • Use the Touchpad to make selections. • Swipe forward and backward using the Touchpad. • Swipe up and down • Use the VR’s Back key to return to a previous selection.
Basic Navigation and Selection Using the Touchpad The Touchpad, located at the right side of the Gear VR for S6, is used for both selection and navigation of displayed elements. Making Selections (Tapping) 1. Move your head to place the pointer on top of the desired item. 2. Tap the touchpad with your finger.
Moving Around the screen (Swiping) • Swipe forward across the touchpad to move to the next item. • Swipe backward across the touchpad to view the previous item.
• Swipe downward across the touchpad to move ot the next item in a list. • Swipe upward across the touchpad to move to the previous item in a list. Swiping to next item (Downward) Swiping to previous item (Upward) Note: Some apps may not support upward or downward swiping actions.
Moving the Pointer The Gear VR for S6 recognizes your head movements and then translates that information as a location within your current screen environment. Some screens may not display a pointer. • Moving your head around also changes the views and perspectives of the current screen. Pointer Pointer Pointer • The pointer and screen views change depending on the detected location of your head. Note: The pointer is centered in your line sight and follows your head movements.
Making a Selection You can select items or apps by moving your head and then tapping the touchpad. 1. Move your head to place the displayed pointer onto a desired selection. 2. Tap the touchpad (on the right side of the unit).
Navigation - Home Screen Note: Any time the Gear VR for S6 application restarts, you are prompted to read the displayed Health and Safety information and tap the touchpad to accept the terms before proceeding. Recent Apps Application Library Oculus Store Samsung Featured Content Access to different pages The Oculus Home screen is the starting point for accessing Apps, files, and features.
• HOME screen: Provides access to the Oculus store, Samsung content, Recent apps, and Library (of apps) • STORE screen: Provides access to either All (new downloadable VR applications) or Samsung (providing Samsung Features content). Use either of the available category tabs (All/Samsung) to then swipe through the available downloads. • LIBRARY screen: Provides access to all currently installed VR content and applications. Swipe through your available selections and tap the touchpad to activate an app.
Accessing Additional Application Functions 1. Navigate to the HOME screen, direct the pointer to the Store tab and tap the touchpad. 2. Select an application entry to view the Apps screen.
3. From the Library screen, scroll to the desired application, and select View Details. 4. This Apps screen provides both useful application information and additional related options such as: • Rating: View current user ranking for this application (1-5). • Comfort: View the current user comfort rating for this application (1-3). • Install/Launch/Play Now: Install an application that is not currently downloaded or Launch/Play the available app.
Using the Universal Menu This menu can be accessed from any active VR application screen and provides ready access to some very useful features. Accessing the Universal Menu 1. From an active VR screen, press and hold the Back key. 2. Place the displayed pointer on top of an available entry and tap the touchpad. Options include: • Oculus Home: Returns you to the Oculus Home screen. • Passthrough Camera: Activates the S6’s rear camera and allows you to see through and to the outside environment.
Notifications Passthrough Camera Oculus Home Reorient Note: These features may not be available in some apps.
Going to Oculus Home 1. From an active VR screen or application, press and hold the 2. Place the pointer on top of Home screen. Back key. Oculus Home, to begin exiting the current app and return to the main Using Passthrough Camera This feature activates the S6’s rear camera and projects it onto your screen so that you can see your surroundings while keeping the Gear VR for S6 on. To activate Passthrough Camera: 1. From an active VR screen, press and hold the Back key. 2.
Reorienting the Gear VR for S6 There may be times when the viewing angle of the screen might change and not appear centered in your line of sight. Reorienting the screen “resets” the viewing angle to match your current line of sight and orientation by “resetting the forward location”. 1. From an active VR screen, press and hold the Back key. 2. Orient your head to the direction you want to set as the new “forward” view. 3. Place the pointer on top of Reorient and tap the touchpad to “reset” the view.
To deactivate the Do Not Disturb Mode: 1. From an active Gear VR for S6 screen, press and hold the Back key. 2. Place the pointer on top of Do Not Disturb and tap the touchpad to deactivate the feature. The screen displays Do Not Disturb: Off. Note: Once deactivated, you ear new notifications such as those for new incoming calls. Adjusting Brightness 1. From an active Gear VR for S6 screen, press and hold the 2. Place the pointer on top of Back key.
Using Comfort Mode There might be times when you need to soften the brightness or intensity of the background blue light. This is accomplished by activating the Comfort Mode feature. To activate the Comfort Mode: 1. From an active Gear VR for S6 screen, press and hold the Back key. 2. Place the pointer on top of Comfort Mode and tap the touchpad to activate the feature. The blue background light dims. The screen displays Comfort Mode: On. To deactivate the Comfort Mode: 1.
Calls The icon displays on the screen if you receive a call while you are using the Gear VR for S6. ►► You can reject the call, by using the pointer on top of your selection and tapping the touchpad. Caution! The Samsung GALAXY S6 may become hotter than normal when it is used with the Gear VR for S6. To avoid overheating of the Samsung GALAXY S6, it is recommended you answer incoming calls by connecting an audio headset or by using a speakerphone to avoid overheating.
Rejecting a call 1. When a call comes in, move your head to place the pointer on top of 2. Move your head to position the pointer on top of Incoming Call. Reject Call. 3. Once the button highlights, tap the touchpad to reject the incoming call. Viewing Notifications While using the Gear VR for S6, you can view general notifications, such as events, messages, and alarms when they display as a pop-up notification on the screen.
Applications Loading New Applications Applications can be loaded from one of two locations: • STORE: Found on the HOME page. • OCULUS app: Available on the GALAXY S6’s Applications page. Loading Using the Store 1. Navigate to the HOME screen, direct the pointer to the Store tab and tap the touchpad. 2. Select an application type (All or Samsung). 3. Swipe through the available pages and select an application entry. 4.
Loading from the GALAXY S6 1. From the Home screen, tap 2. Tap Apps > Oculus. Menu and select either Library or Apps. 3. Scroll to an available application and select INSTALL. 4. Once successfully installed, place the GALAXY S6 securely back into the Gear VR for S6 compartment (Install the Mobile Device). 5. Navigate to the HOME screen, direct the pointer to the Library tab and tap the touchpad. 6. Select the application and follow the prompts.
Oculus Cinema Enjoy videos on a screen in your own virtual movie theatre. 1. Navigate to the HOME screen, direct the pointer to the Library button and tap the touchpad. 2. Select All and then swipe across your touchpad until the Oculus Cinema app displays. 3. Select Start and choose a screen category from the top of the page. Videos are sorted based on the screen type. • Shorts: View or download free videos from Oculus that are optimized for a standard screen.
VR Gallery View images and videos you created using the Samsung GALAXY S6. 1. Navigate to the HOME screen, direct the pointer to the Library button and tap the touchpad. 2. Select All and then swipe across your touchpad until the VR Gallery app displays. Playing videos ►► Select a video folder, then select a video to watch To access the playback controls: 1. While the movie is playing, hover your pointer over the bottom area of the displayed movie and tap the touchpad. 2.
Viewing images Select an image folder and then select an image. To view the previous image, swipe backward across the touchpad. To view the next image, swipe foward across the touchpad. To enlarge the size of the image, swipe upward on the touchpad. To reduce the size of the image, swipe downward on the touchpad. To start a slide show from the image you are currently viewing, tap Play slideshow. Press the Back key twice to align the screen with the current direction you are facing.
Oculus 360 Photos This application provides 360 degree views of available panoramic images. 1. Navigate to the HOME screen, direct the pointer to the Library button and tap the touchpad. 2. Select All and then swipe across your touchpad until the Oculus 360 Photos app displays. 3. Select Start and select an image. Turn your head and view a panorama of the image. While viewing the image, you can tap the touchpad to use the following features: • View a list of images.