Welcome to your Setup Motion Sensor 1 • CO) 2 Make sure the Motion Sensor is within 15 feet (4.5 meters) of your SmartTh ings Hub or Sma rtThings Wifi (or compatible device with SmartThings Hub functionality) during setup. Use the SmartThings mob ile app to • select the "Add device" card and then select the "Motion sensor" category. 3 Remove the tab on the Motion • Sensor marked "Remove When Connecting" and follow the on -screen instructions in the SmartThings app to co m plete setup.
Placement The Motion Sensor can detect motion up to 15 feet (4.5 meters) away with a 120 degree field of view. Simply place the Motion Sensor facing the area that you'd like to monitor and make sure there are no objects blocking its view. The Motion Sensor can also monitor temperature. Troubleshooting 1 • 2 Connect button ..,. ,g. Hold the "Connect" button with a paperclip or similar tool for 5 seconds, and release it when the LED starts blinking red.
:g Information to the User Correct disposal of batteries in this product Changes or modifications not expressly approved by SAMJIN, Inc. could void your aut hority to operate the equipment. (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety Instructions Read, keep, and follow these instructions. Heed all warnings. The Water Lea k Sensor is water-resistant but not water-proof; avo id su bmerg ing it in wate r or liquid to keep inte rior dry and to protect batteries. All other prod ucts should not be used near water or exposed to dripping or splashing of any water or liquid. Clean only with a dry cloth.