User manual

Settings 114
Other call settings
Ignore with message
Create messages to use when rejecting incoming calls. For more
information, see “Ignoring a call with a message” on page 39.
1. From the Home screen, press the Menu Key , then
touch Settings ➔ Call settings ➔ Ignore with message .
2. Touch Create , then enter a text message and touch Save .
• Touch an existing message to modify it.
• To erase messages, press Menu ➔ Delete .
Answering mode
Set options for answering incoming calls.
1. From the Home screen, press the Menu Key , then
touch Settings ➔ Call settings ➔ Answering mode .
2. Configure options:
•Slide open : When enabled, sliding the phone open automatically
answers the phone, in speakerphone mode.
• Answering mode : When enabled, your phone automatically
answers incoming calls when a headset is connected.
• Automatic answering timer : When using Answering mode, set a
timer for a delay before automatically answering calls (this setting is
only available when Answering mode is enabled).
Auto retry
When enabled, your phone will automatically try a call again, if it
encounters a busy signal from the network.
1. From the Home screen, press the Menu Key , then
touch Settings ➔ Call settings
2. Touch Auto retry to enable or disable automatic call retry.
When enabled, a check mark appears in the checkbox.
DTMF Tones
Set the length of DTMF (Dual Tone Multiple Frequency) tones that
your phone sends. DTMF tones are used as input by some
automated call systems.
1. From the Home screen, press the Menu Key , then
touch Settings ➔ Call settings ➔ DTMF tones .
2. Touch Normal or Long .