User manual

85
Adding a Wi-Fi Network using WPS
Some wireless access points provide connections via the Wi-Fi
®
Protected Setup (WPS) standard, which provides easy and secure
setup and connection. To use the your phone’s WPS setting, the
wireless access point must support WPS.
1. From the Home screen, press the Menu Key , then
touch Settings ➔ Wireless & networks ➔ Wi-Fi settings .
2. Check to see that your phone’s Wi-Fi service is on. If it is
not on, touch Wi-Fi to turn Wi-Fi On.
3. Touch WPS button connection .
4. Within 2 minutes, press the WPS button on the wireless
access point.
5. Follow the prompts to complete the setup.
Wi-Fi Direct
Wi-Fi Direct is a standard that allows devices to connect to each
other directly via Wi-Fi
®
, without a wireless access point or
hotspot. For example, some printers support Wi-Fi Direct, and
you could connect to a printer via Wi-Fi Direct to print from your
phone.
Turning Wi-Fi Direct On or Off
1. From the Home screen, press the Menu Key , then
touch Settings ➔ Wireless & networks ➔ Wi-Fi Direct
settings .
2. Touch Wi-Fi Direct to turn Wi-Fi On or Off. When On, a
checkmark appears in the box.