User Manual
34_ camera operation
camera operation
y
This function masks the strong light to minimize
white out due to over exposure and preserve much
of the on-screen details when the camera aims a
strong light source.
- LEVEL : Adjusts the brightness level of a
monitoring area.
- LIMIT : Enable to change the operating condition.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be
enhanced.
-
RETURN : Return to the MAIN SETUP menu.
M
` If the white balance menu is set to manual, then HLC performance can be limited.
` Because there can be a difference in the effectiveness of HLC according to the amount
of light area in the screen, optimize the installation angle for the best HLC performance.
` When dark, the HLC is only activated when a bright light exceeding a specifi c size. (In
NIGHT ONLY mode).
` The HLC is not activated in day light or when bright light is not present at night. (In
NIGHT ONLY mode).
▶
1.
2.
3.
IIII
I
IIIIIIIIIIIIIIII
3
4.
IIIIIIIIIIIIII
I
IIIIII
7
5
IIII
I
IIIIIIIIIIIIIIII
3
6.
RIGHT
IIIIIIIIIIIIII
I
IIIIII
7
7.