Manual

English - 34
OPERATION
Storing Channels in Memory
œ The TV must be connected
to an antenna in order to
receive digital TV signals.
Even if a particular channel
is deleted from memory,
you can always tune to that
channel directly by using
the number buttons on the
remote control.
6
Press the ENTER button to
start the auto program.
The TV begins memorizing
all available channels.
Press the ENTER button at
any time to interrupt the
memorization process.
Press the EXIT button to exit.
5
Press the ▲ or ▼
button to select the
antennas to memorize.
4
Press the ▲ or ▼ button
to select the antenna
connection, then press the
ENTER button.
When selecting Cable TV system:
Press the … or † button
to select “Cable”, then
press the ENTER button.
“Start” is selected.
Press the œ or √ button.
Press the … or † button
to select “STD”, “HRC”, or
“IRC”, then press the
ENTER button.
Press the œ or √ button to
select “Start”, then press
the ENTER button.
œ Air : “Air” antenna signal
Cable : “Cable” antenna
signal
Air+Cable : “Air” and “Cable”
antenna signals
œ STD, HRC and IRC
identify various types of
cable TV systems. Contact
your local cable company
to identify the type of cable
system that exists in your
particular area.
•All available DTV and analog channels are automatically stored
in memory when channels are selected by the direct tuning
function.
Auto Program
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Select the antennas to memorize.
Air
Cable
Air + Cable
Auto Program
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Select the antennas to memorize.
Air
Cable
Air + Cable
Auto Program
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Select the cable system.
Analog
Start
STD ✔
HRC
IRC
Auto Program
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Select the antennas to memorize.
Air
Cable
Air + Cable
Memorize Channel
Auto Program in progress.
Air Channel 15
Stop
Auto Program
Start
Start
Start
Start
Start
Start
Start
Start
Start
BP68-00545AEng 10/18/05 5:53 PM Page 34