Manual

English - 38
OPERATION
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear.
2
Press the … or † button
to select “Name”, then
press the ENTER button.
Press the … or † button
to select the channel to
be assigned to a new
name, then press the
ENTER button.
Press the … or † button
to select a letter, a
number or a blank.
(Results in this sequence:
A...Z, 0...9, +, - , ✽, /,
blank).
Press the √ button to
switch to the next field,
which will be selected.
Select a second letter or
digit by pressing the
… or
† button, as above.
Repeat the process to
select the last three digits.
When you have finished,
press the MENU or ENTER
button.
Press the
œ or √ button to select “OK”, then press the ENTER button to
assign the new name.
To erase the assigned new name, select “Clear” by pressing the œ or √
button, then press the ENTER button.
Press the EXIT button to exit.
œ If you add or delete the TV
channel, the corresponding
label information will also be
added or deleted.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
Channel
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Channel
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Name
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
OK
Clear
Clear
Clear
Clear
Clear
Air 6
Air 7
Air 9
Air 11
Air 13
Name
Input
Picture
Sound
Channel
Setup
Guide
OK
Clear
Clear
Clear
Clear
Clear
Air 6
Air 7
Air 9
Air 11
Air 13
†
…
†
…
A
▼
▼
Move ReturnAdjust
BP68-00545AEng 10/18/05 5:53 PM Page 38