Datasheet

Consumer Class
Spinpoint F3EG
1.5TB 2TB
HD153WI HD203WI
FEATURES
• 500GB Formatted Capacity Per Disk • Environment friendly product with RoHS compliance
• Serial ATA 3.0Gbps Interface Support • Improved performance with dual-ARM based firmware
• Improved recording stability over temperature with PMR • ATA S.M.A.R.T. Compliant
• Advanced dynamic FOD control for best data integrity • ATA Automatic Acoustic Management Feature
• Intelligent compensation of external disturbance • ATA 48-bit Address Feature
• SATA Native Command Queuing Feature • ATA Device Configuration Overlay Feature
• Device Initiated SATA Power Management • NoiseGuard™
• Shock & Rotational vibration sensor • SilentSeek™
Interface Serial ATA 3.0Gbps Temperature
Buffer DRAM Size
2
32 MB Operating 0 ~ 60 °C
Byte per Sector 512 bytes Non-operating -40 ~ 70 °C
Capacity
DRIVE CONFIGURATION
Model [32MB]
ENVIRONMENTAL SPECIFICATIONS
Humidity (non-condensing)
Operating 5 ~ 90 %
Average Seek time (typical) 8.9 ms Non-operating 5 ~ 95 %
Average Latency 5.56 ms Linear Shock (1/2 sine pulse)
Data Transfer Rate Operating (2.0ms) 70 G
Media to/from Buffer (Max.) 135 MB/sec Non-operating (1.0ms) 300 G
Buffer to/from Host (Max.) 300 MB/sec Altitude (relative to sea level)
Drive Ready Time (typical) 15 sec Operating -1,000 to 10,000 m
Non-operating -1,000 to 40,000 m
Height (Max.) 26.1 mm
Non-recoverable Read Error
1 sector in 10
15
bits
Width 101.6 mm
Load/Unload Cycles (ambient) 300,000 Length 147.0 mm
Weight (avg.) 690g
Idle (typ/max) 2.6/2.7 Bel
Performance Seek (typ/max) 2.9/3.1 Bel
* Note : Design and specifications are subject to change without prior notice.
Quiet seek (typ/max) 2.8/2.9 Bel
1.1MB = 1,000,000 Bytes, 1GB=1,000,000,000 Bytes
2. A small portion of the 32MB buffer memory is reserved for
Voltage +5V±5%, +12V±10%
firmware use
3 Random seek with 30% duty cycle.(Average value)
Spin-up Current (Max.) 2.0A
Random Seek
3
(
AVG
)
7.1W
Read/Write On Track (AVG) 6.2W
Idle (AVG) 5.4W
Standby (AVG) 1W
Sleep (AVG) 1W
3.5" HDD product specification Rev 0.0
POWER REQUIREMENTS
Capacity
1
ACOUSTIC Noise
2 TB
PERFORMANCE SPECIFICATIONS
RELIABILITY SPECIFICATIONS
PHYSICAL DIMENSION

Summary of content (1 pages)