DVD Player DVD-HD870 www.samsung.
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat.
Precautions RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Note: • This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. • This DVD player is designed and manufactured to respond to the Region Management Information.
Before you start Accessories Remote Batteries for User’s Manual Video/Audio Control Remote Control (AK68-01290X) Cable (AAA Size) (AC39-42001R) (AK59-00054D) (AC43-12002H) Install Batteries in the Remote control 1 Open the battery cover on the back of the remote control. 2 Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly. 3 Replace the battery cover.
TA B L E OF CONTENTS Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 1: Setup General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1 Setup SETUP General Features Note - Discs which cannot be played with this player. • DVD-ROM • DVD-RAM • CD-ROM • CDV • CDI • CVD • Super Audio CD(except CD layer) • CDGs play audio only, not graphics. - Ability to play back may depend on recording conditions. • DVD-R, +R • CD-RW • DVD+RW, -RW (V mode) - The unit may not play certain CD-R, CD-RW and DVD-R due to the disc type or recording conditions.
SETUP Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types DVD Audio + Video VIDEO-CD Audio + Video AUDIO-CD Disc Size Max. Playing Time 5” Single-sided 240 min. Double-sided 480 min. 3 1/2” Single-sided 80 min. Double-sided 160 min. 5” 74 min. 3 1/2” 20 min. 5” 74 min. 3 1/2” 20 min.
SETUP Setup Description Front Panel Controls 9 1 2 4 3 5 6 10 7 8 1. STANDBY/ON ( ) When STANDBY/ON is pressed on, the indicator goes out and the player is turned on. 6. VIDEO SEL. Press to change Video output mode (S-Video, I-SCAN or P-SCAN). 2. STANDBY Indicator When the unit is first plugged in, this indicator lights. 7. STOP ( ) Stops disc play. 3. DISC TRAY Place the disc here. 8. SKIP ( ) / SEARCH Use to forward skip a scene or music. 4.
SETUP Rear Panel 1 1 1. 2. 3. 2 3 4 DIGITAL AUDIO OUT JACKS - Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. - Use either an optical or coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder. COMPONENT VIDEO OUT JACKS - Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.
SETUP Setup Tour of the Remote Control 1 4 5 6 7 8 DVD POWER Button Turns the power on or off. 2. NUMBER Buttons 3. VIDEO SEL. Button Changes Video output mode (S-Video, I-SCAN or PSCAN) 4. SEARCH Buttons ( ) / Allow you to search forward/backward through a disc. 5. INSTANT REPLAY Button This function is used to replay the previous 10 seconds of a movie from the current position. 6. SKIP Buttons ( ) / Use to skip the title, chapter or track. 7. STOP Button ( 8.
Chapter 2 CONNECTIONS Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.
CONNECTIONS Connection to a TV (S-Video) - Connecting to your TV using an S-Video cable. 1 Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the DVD player to the S-VIDEO IN terminal of your TV. 2 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV. 3 RED Set the Video Output to S-Video in the Display Setup menu.
CONNECTIONS Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - This is the best available connection if your TV is not capable of receiving a Progressive Scan signal. - You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.
CONNECTIONS Connection to a TV (Progressive) - What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method. Progressive scanning method provides better and clearer picture quality. - If you set the HDMI output resolution to 720p or 1080i, the S-Video output will not output video. Connections 1 Using Component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV.
CONNECTIONS Connecting to a TV with HDMI Jack 1 Using an HDMI-HDMI cable connect the HDMI OUT terminal on the rear of the DVD player to the HDMI IN terminal of your TV. 2 Press the input selector on your TV remote control until the HDMI signal from the DVD player appears on your TV screen. HDMI cable Connecting to a TV with DVI Jack 1 Using an HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD player to the DVI IN terminal of your TV.
CONNECTIONS • HDMI (High Definition Multimedia Interface) HDMI enables you to make a digital video and audio connection with a single cable. Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. • HDMI connection description - The player outputs a pure digital signal to the TV through an HDMI cable. - If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the screen.
CONNECTIONS Connection to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, S-VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO, COMPONENT or HDMI-DVI IN terminal of your TV as described on pages 12 to 16. 3 RED Turn on the DVD player, TV, and Amplifier.
CONNECTIONS Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 Connections If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier. If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
Chapter 3 BASIC FUNCTIONS Playing a Disc Before Play - Turn on your TV and set it to the correct Video Input your DVD player is connected to on the TV's remote control. - If you connected the DVD player to an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press a NUMBER button.
BASIC FUNCTIONS 4 Stopping Play Press the STOP ( ) button during play. Note - If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated. Press the PLAY/PAUSE ( ) button to resume normal play. - If the player is left in the stop mode for more than 30 minutes, the power will automatically turn off. (Automatic Power-Off Function) 5 Removing Disc Press the OPEN/CLOSE ( ) button.
BASIC FUNCTIONS Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track ▼ During play, press the SEARCH ( or ) button on the remote control for more than 1 second. If you want to search at a faster speed on the DVD or CD, press and hold the button.
BASIC FUNCTIONS Using the Display Function When Playing a DVD/VCD/MPEG4 ▼ You can select Info in the function menu by pressing the MENU button. ▼ When playing VCD2.0, this function works only whenthe menu is off. Select Menu Off by pressing the DISC MENU button. ▼ You may use the number buttons of the remote control to directly access a title, chapter or to start the playback from a desired time. 1 During play, press the INFO button on the remote control.
BASIC FUNCTIONS Note Title Chapter To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified. Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to tracks on an audio CD). Time Allows playback of the film from a desired time. You must enter the starting time as a reference. The time search function does not operate on some discs.
BASIC FUNCTIONS Using the Title Menu 1 During the playback of a DVD disc, press the MENU button on the remote control. 2 Press ENTER key for Title Menu Enter Return Menu Note - Depending on a disc, the Title Menu may not work. - Title Menu will only be displayed if there are at least two titles in the disc. Using the Function Menu Using the Function Menu (DVD/VCD) 1 Press the MENU button during playback. 2 Press the /❷ buttons to select Function, then press the ❿ or ENTER button.
BASIC FUNCTIONS Repeat Play Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc. When playing a DVD/VCD 1 Press the REPEAT button on the remote control. Repeat screen appears. ▼ 2 DVD Press the ➛/❿ buttons to select Chapter, Title or A-B, then press the ENTER button. Off 01 01 A - B T ENTER REPEAT DVD repeats play by chapter or title and VCD repeat play by disc or track. Chapter ( ): repeats the chapter that is playing.
BASIC FUNCTIONS Slow Play This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments being played etc., so you can study them more closely. When playing a DVD 1 During play, press the PLAY/PAUSE ( ) button. Basic Functions 2 Press the SEARCH ( / ) button to choose the play speed between 1/8, 1/4 and 1/2 of normal during PAUSE or STEP mode.
Chapter 4 A D VA N C E D F U N C T I O N S Adjusting the Aspect Ratio (EZ View) To play back using aspect ratio (DVD) ▼ Press the EZ VIEW button. - The screen size changes when the button is pressed repeatedly. - The screen zoom mode operates differently depending on the screen setting in the Display Setup menu. - To ensure correct operation of the EZ VIEW button, you should set the correct aspect ratio in the Display Setup menu. (See pages 52 to 54).
A D VA N C E D F U N C T I O N S If you are using a 4:3 TV For 16:9 aspect ratio discs For 4:3 aspect ratio discs - 4:3 Letter Box Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen. - Normal Screen Displays the content of the DVD title in 4:3 aspect ratio. - 4:3 Pan&Scan The left and right portions of the screen are cut off and the central portion of the 16:9 screen is displayed.
A D VA N C E D F U N C T I O N S Selecting the Audio Language You can select a desired audio language quickly and easily with the AUDIO button. Using the AUDIO button (DVD/VCD/MPEG4) 1 Press the AUDIO button. The Audio changes when the button is pressed repeatedly. - The audio languages are represented by abbreviations. DVD ENG DOLBY DIGITAL 5.1CH When playing a VCD, you can select among Stereo, Right or Left.
A D VA N C E D F U N C T I O N S Selecting the Subtitle Language You can select a desired subtitle quickly and easily with the SUBTITLE button. Using the SUBTITLE button (DVD/MPEG4) 1 Press the SUBTITLE button. The subtitle changes when the button is pressed repeatedly. The subtitle languages are represented by abbreviations. DVD Off External subtitle option will appear, depends the DivX Disc. SUBTITLE MPEG4 Subtitle Selection External Subtitle Off readme.
A D VA N C E D F U N C T I O N S Changing the Camera Angle When a DVD contains multiple angles of a particular scene, you can use the ANGLE function. Using the ANGLE function (DVD) If the disc contains multiple angles, the ANGLE mark appears on the screen. 1 During play, press the MENU button on the remote control. 2 Press the /❷ buttons to select Function , then press the ❿ or ENTER button.
A D VA N C E D F U N C T I O N S Using the Instant Replay/Skip Function Using the Instant Replay function (DVD) If you miss a scene, you can see it again using this function. Press the INSTANT REPLAY button. - The current scene moves backward about 10 seconds, and plays back. Using the Instant Skip function (DVD) Use this function to skip playback about 10 seconds ahead of the current scene. Press the INSTANT SKIP button. - Playback will skip ahead 10 seconds.
A D VA N C E D F U N C T I O N S Using the Bookmark Function This feature lets you bookmark sections of a DVD or VCD (Menu Off mode), so you can quickly find them at a later time. Using the Bookmark Function (DVD/VCD) 1 During play, press the MENU button on the remote control. 2 Press the /❷ buttons to select Function, then press the ❿ or ENTER button. Info Zoom Bookmark Repeat EZ View Angle Enter Return Menu Return Menu 3 Press the /❷ buttons to select Bookmark, then press the ❿ or ENTER button.
A D VA N C E D F U N C T I O N S Recalling a Marked Scene 1~3 The first 1~3 steps are the same as those for “Using the Bookmark Function” on page 34. 4 CANCEL Press the ➛/❿ buttons to select a marked scene. 5 Press the PLAY/PAUSE ( ) button to skip to the marked scene. Advanced Functions Clearing a Bookmark 1~3 The first 1~3 steps are the same as those for “Using the Bookmark Function” on page 34. 4 CANCEL Press the ➛/❿ buttons to select the bookmark number you want to delete.
A D VA N C E D F U N C T I O N S Using the Zoom Function Using the Zoom Function (DVD/VCD) 1 During play, press the MENU button on the remote control. 2 Press the /❷ buttons to select Function, then press the ❿ or ENTER button. Info Zoom Bookmark Repeat EZ View Angle Enter 3 Press the /❷ buttons to select Zoom, then press the ❿ or ENTER button.
A D VA N C E D F U N C T I O N S Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio CD Audio or discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that can be organized into folders as shown below. They are similar to how you use your computer to put files into different folders. Open the disc tray. Place the disc on the tray. Close the tray. The tray closes and this screen displays. Stop Off 00:00:00 WMA JPEG MP3 MPEG4 Enter Menu Return : Name of currently playing file.
A D VA N C E D F U N C T I O N S MP3/WMA/CD Audio Playback Open the disc tray. Place the disc on the tray. Close the tray. ▼ 1 Stop Off 00:00:00 WMA JPEG MP3 MPEG4 Enter Menu Return 2 Press the /❷ buttons to select a song file. Press ENTER to begin playback of the song file. Play Off B e c a u s e Yo u T 00:00:23 ... B e c a u s e Yo u Cactus Sad Dayu Wonderful Enter Return REPEAT Repeat Repeat/Random playback 1 Press the REPEAT button to change the playback mode.
A D VA N C E D F U N C T I O N S CD-R MP3/WMA file When you record MP3 or WMA files on CD-R for playback in this unit, please refer to the following. - Your MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac. This format is the most widely used. - When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .wma” as the file extension. General name format : Title.mp3.
A D VA N C E D F U N C T I O N S MPEG4 Playback MPEG4 Play Function MPEG4 is a compressed video format designed to deliver DVD quality video at lower data rates and smaller file sizes. Types of MPEG4 files are DivX or Xdiv. These files have an .avi extension. AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” extensions can be played. 1 Open the disc tray. Place the disc on the tray. Close the tray.
A D VA N C E D F U N C T I O N S CD-R AVI file MPEG4 Function Description Function Description During play, press the or button, it moves forward or backward 5 minutes. During play, press the SEARCH ( or ) button and press Search again to search at a faster ( or ) speed. Allows you to search at a faster speed in an AVI file. (2X, 4X, 8X) Allows you to search at a Slow Motion slower speed in an AVI file.
A D VA N C E D F U N C T I O N S Picture CD Playback Off Stop 1 00:00:00 Select the desired folder. (See page 37) WMA JPEG MP3 MPEG4 Enter 2 Off Stop 00:00:00 1 Press the /❷ buttons to select a Picture file in the clips menu and then press the ENTER button. Menu Return ... 1 2 3 Enter Return 3 Menu Note - Press the STOP button to return to the clips menu. ENTER RETURN Press the INFO button to display the menu.
A D VA N C E D F U N C T I O N S MP3-JPEG Playback You can play JPEG photo file using music as a background. 1 Press the /❷ buttons to select an MP3 file in the clips menu and then press the ENTER button. ▼ 2 Music will play from the beginning. Press the /❷ buttons to select a JPEG file in the clips menu and then press the ENTER button. Note MP3 and JPEG files have to be on the same 3 Press STOP button when you want to stop the playback. disc.
Chapter 5 CHANGING SETUP MENU Using the Setup Menu The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have. 1 With the unit in Stop mode, press the MENU button on the remote control. Press the /❷ buttons to select Setup, then press the ❿ or ENTER button.
CHANGING SETUP MENU Setting Up the Language Features If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. Using the Player Menu Language 1 With the unit in Stop mode, press the MENU button. 2 Press the /❷ buttons to select Setup, then press the ❿ or ENTER button.
CHANGING SETUP MENU Using the Disc Menu Language This function changes the text language only on the disc menu screens. 1 With the unit in Stop mode, press the MENU button. 2 Press the /❷ buttons to select Setup, then press the ❿ or ENTER button. Setup Language Setup ❿ Audio Setup ❿ Display Setup ❿ Parental Setup : ❿ ❿ DivX(R)Registration Enter Return Menu 3 Press the /❷ buttons to select Language Setup, then press the ❿ or ENTER button.
CHANGING SETUP MENU Using the Audio Language 1 With the unit in Stop mode, press the MENU button. 2 Press the /❷ buttons to select Setup, then press the ❿ or ENTER button. Setup Language Setup ❿ Audio Setup ❿ Display Setup ❿ Parental Setup : ❿ DivX(R)Registration ❿ Enter Return Menu 3 Press the /❷ buttons to select Language Setup, then press the ❿ or ENTER button.
CHANGING SETUP MENU Using the Subtitle Language 1 With the unit in Stop mode, press the MENU button. 2 Press the /❷ buttons to select Setup, then press the ❿ or ENTER button. Setup Language Setup ❿ Audio Setup ❿ Display Setup ❿ Parental Setup : ❿ ❿ DivX(R)Registration Enter Return Menu 3 Press the /❷ buttons to select Language Setup, then press the ❿ or ENTER button.
CHANGING SETUP MENU Using the DivX Subtitle Language 1 With the unit in Stop mode, press the MENU button. 2 Press the /❷ buttons to select Setup, then press the ❿ or ENTER button. Setup Language Setup ❿ Audio Setup ❿ Display Setup ❿ Parental Setup : ❿ ❿ DivX(R)Registration Enter Return Menu 3 Press the /❷ buttons to select Language Setup, then press the ❿ or ENTER button.
CHANGING SETUP MENU Setting Up the Audio Options Audio Options allows you to setup the audio device and sound status settings depending on the audio system in use. 1 With the unit in Stop mode, press the MENU button. 2 Press the /❷ buttons to select Setup, then press the ❿ or ENTER button. Setup Language Setup ❿ Audio Setup ❿ Display Setup ❿ Parental Setup : ❿ ❿ DivX(R)Registration Enter Return Menu 3 Press the /❷ buttons to select Audio Setup, then press the ❿ or ENTER button.
CHANGING SETUP MENU ❶ Digital Out - PCM : Converts to PCM(2CH) audio. - Bitstream : Outputs Dolby Digital via digital output. Select Bitstream when connecting to a Dolby Digital Decoder. ❷ DTS Select On when connecting to DTS Decoder - On : Outputs DTS Bitstream via digital output. - Off : Doesn’t output digital signal. Note • There is no analog audio output when you play a DTS disc. ❸ Dynamic Compression - On : To select dynamic compression.
CHANGING SETUP MENU Setting Up the Display Options Display options enable you to set various video functions of the player. 1 With the unit in Stop mode, press the MENU button. 2 Press the /❷ buttons to select Setup, then press the ❿ or ENTER button. Setup Language Setup ❿ Audio Setup ❿ Display Setup ❿ Parental Setup : ❿ DivX(R)Registration ❿ Enter Return Menu 3 Press the /❷ buttons to select Display Setup, then press the ❿ or ENTER button.
CHANGING SETUP MENU ❶ TV Aspect Depending on a type of television you have, you may want to adjust the screen setting (aspect ratio). - 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. - 4:3 Pan&Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen.
CHANGING SETUP MENU ❻ Picture Quality - Black Level : Adjusts the brightness of the screen.(On or Off) It does not function in Progressive mode. - Brightness : Level 1 ~ Level 5 - Contrast : Level 1 ~ Level 5 - Color Saturation : Level 1 ~ Level 5 PICTURE QUALITY Black Level : Off Brightness : Level 3 Contrast : Level 3 Color Saturation : Level 3 Setup Enter Return Menu • Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
CHANGING SETUP MENU Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. Setting Up the Rating Level 1 With the unit in Stop mode, press the MENU button. 2 Press the /❷ buttons to select Setup, then press the ❿ or ENTER button.
CHANGING SETUP MENU Changing the Password 1 With the unit in Stop mode, press the MENU button. 2 Press the /❷ buttons to select Setup, then press the ❿ or ENTER button. Setup Language Setup ❿ Audio Setup ❿ Display Setup ❿ Parental Setup : ❿ ❿ DivX(R)Registration Enter Return Menu 3 Press the /❷ buttons to select Parental Setup, then press the ❿ or ENTER button.
Chapter 6 REFERENCE Troubleshooting Before requesting service, please check the following. Action Problem No operations can be performed with the remote control. • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again.
REFERENCE Problem No HDMI output. Action Page • Check the if the Video output is set to HDMI. • Check the connection between the TV and the HDMI jack of DVD player. • See if the TV supports this 480p/720p/1080i DVD player. P16~17 Abnormal HDMI output screen. • If snow noise appears on the screen, it means that TV does not support HDCP (High-bandwidth Digital Content Protection). P16~17 HDMI output Jitter • Check your TV system setup correctly.
REFERENCE Specifications General Power Requirements AC 110-240 V ~ 60/50 Hz Power Consumption 9W Weight Dimensions Operating Temperature Range Operating Humidity Range DVD (DIGITAL VERSATILE DISC) Disc +41°F to +95°F 10 % to 75 % Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. CD : 3 1/2” (COMPACT DISC) Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 20 min.
MEMO
MEMO
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Region North America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL Latin America CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA COLOMBIA BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE Europe CIS GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN U.
Warranty LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. ☎1-800-SAMSUNG (7267864)/www.samsung.com Samsung Electronics America,Inc. 105 Challenger Road Ridgefield Park,NJ 07660-0511 1-800-SAMSUNG (7267864) www.samsung.
