LED TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model [HC670_677_678-ZA]Install Guide-X0ENG.indd 1 Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Introduction This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of special functions, and lets you limit some user (guest) controls. Operational Modes This TV has two modes : Interactive and Stand-alone mode.
Contents Introduction............................................................................................................................................................... 2 Operational Modes.................................................................................................................................................... 2 Still image warning..............................................................................................................................................
Accessories ✎✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎✎The items’ color and shape may vary, depending on the model. ✎✎The parts for the stand are listed under Stand Components on the following page.
Installing the LED TV Stand The 40” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right. See page 6. Components When installing the stand, use the provided components and parts.
Assembling the swivel stand (40 inch TVs or larger) The 40” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL. ¦¦ 20° swivel To configure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°.
¦¦ Hotel Mount Kit Bolt + Nut Short Bolt (2EA) Long Bolt (2EA) Nut (2EA) Washer (2EA) Top Bottom [ Affix the stand to a flat surface such as a dresser top, desk top, or entertainment center as shown. WARNING: To prevent injury, you must attach this TV securely to the floor, a table, a dresser top, etc. with the Hotel Mount Kit as described in these instructions. English [HC670_677_678-ZA]Install Guide-X0ENG.
Using the TV's Controller The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control. Selecting the Media Play Selecting the Menu Select a source. Return Function menu TV Controller Remote control sensor Power off The image is drawn as if you are facing the front side of the TV. ✎✎The product color and shape may vary depending on the model. ✎✎To exit the menu, press the Controller for more than 1 second.
The Connection Panel HC670/HC677 Model 7 - SIDE - 1 1 HDMI IN 3 (ARC) HDMI IN 2 (DVI) 40"/48" MODEL HDMI IN 1 EX-LINK 2 (5V 0.5A) / CLONING 4 AV IN VIDEO 5 AUDIO OUT AUDIO 3 6 7 - SIDE - 1 1 HDMI IN 3 (ARC) HDMI IN 2 (DVI) 28" MODEL HDMI IN 1 EX-LINK 2 (5V 0.5A) / CLONING 4 AV IN VIDEO 5 AUDIO 3 AUDIO OUT 6 English [HC670_677_678-ZA]Install Guide-X0ENG.
HC678 Model 8 - SIDE - 1 1 HDMIIN IN3 HDMI 3(ARC) (ARC) HDMI IN 2 (DVI) GAME CONTROL DATA HDMI IN 1 2 (5V 0.5A) / CLONING EX-LINK 4 AV IN VIDEO 5 AUDIO 3 AUDIO OUT 6 ✎✎Whenever you connect an external device to your TV, make sure that the TV and the device are turned off. ✎✎When connecting an external device, match the color of the connection terminal to the cable. 1 HDMI IN 1, 2 (DVI), 3 (ARC) : Connects to the HDMI jack of a device with an HDMI output.
Using the TV's Controller Turns the TV on and off. Display and select the available video sources. Press to access channels directly. Press to select additional digital channels being broadcast by the same station. For example, to select channel ‘54-3’, press ‘54’, then press '-' and ‘3’. Return to the previous channel. Cut off the sound temporarily. ¢ Adjust the volume. VOL CH CH LIST Display the channel list on the screen. HOME Display the main on-screen menu. CONTENT Change channels.
Installing the batteries (Battery size: AAA) Rear of the Remote ✎✎After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed. Installing Batteries into the Remote (battery size: AAA) Match the polarity of the batteries to the symbol in the batter compartment. ✎✎ NOTE •• Use the remote control within 23~33 feet of the TV. •• Bright light may affect the performance of the remote control. Avoid using near fluorescent lights or neon signs.
Connecting the TV to the Lodgenet game controller or a STB of a SI vendor HC670/HC677 MODEL TV Rear Panel N3 ) ETH MODEM Data Cable 1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable. ✎✎ The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type. HC678 MODEL TV Rear Panel ETH MODEM Data Cable GAME CONTROL DATA or TV Rear Panel Game Controller GAME CONTROL DATA Data Cable 1.
¦¦ List of SI Vendors and Compatible Data Cables Supplied with the TV yy Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables. yy Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV. Note the labeled end. 14 SI Vendor Cable code Samsung OCC Enseo Guest-Tek BN39-00865B NXTV BN39-01011B nStreams BN39-01110A MTI BN39-01011C Confirm the code on the Code Label Note the labeled end.
¦¦ Connecting the Audio Output to an Audio Amplifier TV Rear Panel AUDIO IN AUDIO OUT Audio Amplifier 1S tereo cable 1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable. (Stereo cable not provide) English [HC670_677_678-ZA]Install Guide-X0ENG.
Connecting the RJP (Remote Jack Pack) Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV. HC670/HC677 Model RJP Rear USB HDMI S-VIDEO RCA AUDIO/PC RS/232 TV Rear Panel USB HDMI S-VIDEO RCA AUDIO/PC RS/232 3 HDMI Cable HDMI IN 3 (ARC) HDMI IN 2 ( ) (DVI) HDMI IN 1 HDMI IN 3 (ARC) (5V 0.5A) HDMI IN 2 / CLONING ( ) (DVI) 2 Video / Audio Cable EX-LINK HDMI AV ININ 1 VIDEIO VIDEO (5V 0.
1. Connect the AUDIO OUT port of the TV to the PC/AUDIO port of the RJP. 2. Connect the AV IN VIDEO/L-AUDIO-R ports of the TV to the RCA port of the RJP. 3. Connect one of the HDMI IN ports of the TV to the HDMI port of the RJP. 4. Connect the EX-LINK port of the TV to the RS/232 port of the RJP. ✎✎ This Samsung TV is compatible with the Tele Adapt TA-7610 RJP only.
Setting the Hotel Option Data To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode menu and the Interactive mode menu. The menu items that differ between the menus are listed below. Menu items in the Stand-alone mode only: –– SI Vendor : Smoovie –– REACH Server and its submenus. Menu items in the Interactive mode only: –– SI Vendor: Samsung and other vendors.
¦¦ Menu Items To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any changes you made are saved. Menu Item initial Value Description Select the Hospitality mode.
Menu Menu OSD Item initial Value Picture Menu Lock OFF Menu Display ON Panel Button Lock Unlock Home Menu Display ON Home Menu Editor Home Menu Auto Start Clock Type OFF Local Time Manual Time Channel Type … Time Channel Num … Clock Enable or disable the Picture Menu. yy On : The Main Menu is displayed. yy Off : The Main Menu is not displayed. Turning the front panel (local key) operations on/off. yy Unlock : Unlocks all panel keys. yy Lock : Locks all panel keys.
Menu Eco Solution Item initial Value Energy Saving Off Welcome Message Edit Welcome Message OFF Hospitality Logo OFF Hospitality Logo DL … Edits the Welcome Message. Logo/ Message Cloning Logo Display Time Clone TV to USB Clone USB to TV Setting Auto Intialize … OFF REACH 3.0 OFF REACH 2.0 OFF REACH Channel … Group ID … IPG Room Type … Ticker … REACH Update Time … REACH Update Immediate … REACH Solution Room Number REACH 2.0 TV Sound REACH 2.
Menu Item Security Password Input Password Setting Password Reset Security Mode USB HDMI initial Value … … … … … DRM Mode Pro:idiom PI AES Data 0xD279 PI AES Log OFF View PI AES Log … DRM Self Diagnosis for TV Self Diagnosis for HTV System SW Upgrade Description Input Password 00000000.(HC678 model none) Set new Password.(HC678 model none) Reset Password to 00000000.(HC678 model none) Security Mode ON or OFF.(HC678 model none) USB Disable or Enable.
¦¦ Using the Soccer Mode Soccer Mode t (only Mexico have) ✎✎MENUm → Applications → Soccer Mode → ENTERE This mode provides optimized condition for watching sports games. yy a (Zoom): Pause playback and divide the picture into 9 parts. Select a part to zoom it in. Press this button again to resume. ✎✎ If you turn the TV off while watching Soccer Mode, the Soccer Mode will be disable. ¦¦ Welcome Message The Welcome Message feature displays a custom message on the TV every time it is turned on.
¦¦ Hotel Logo The Hospitality Logo function displays the Hotel's picture image when the TV is powered on. –– Hospitality Logo settings are the Hotel mode menus. –– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. –– If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on.
¦¦ USB Cloning The USB Cloning function lets you download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you create a standard array of settings and distribute that standard array to all the TVs in your facility. yy Cloning from TV to USB: Copies stored menu settings from a TV to a USB device. 1. Insert a USB drive into the USB port on the rear of the TV 2.
yy Settings Cloned in the Hotel Menu Menu Item Cloning Support Applicable Region Hospitality Mode Yes All SI Vendor Yes All except Brazil Power On Channel Yes All Power On Channel Num Yes All Power On Channel Type Yes All Power On Volume Yes All Power On Volume Num Yes All Min Volume Yes All Max Volume Yes All Power On Source Yes All Power On Option Yes All Channel Setup N/A All except Hospital Channel Editor N/A All Dynamic SI N/A Smooovie SI and Hospital Pictur
Menu Item Cloning Support Hospitality Logo DL Yes All Logo Display Time Yes All Clone TV to USB Yes All Clone USB to TV Yes US and US Hospital Setting Auto Intialize Yes All REACH 3.0 Yes ASIA Models only REACH 2.
¦¦ Multi Code Remocon A Multi Code Remocon is a special remote which is designed to control multiple TVs. This function is useful where there is more than one TV in a location. You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID numbers are displayed on each TV's OSD. The Initial ID code for each TV is “0”. –– You can set and reset the ID code in Analog TV mode or PC mode. (Not available in DTV mode.) –– You can set the ID code to any digit from 0 to 9.
¦¦ Setting Auto Initialize When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture, Sound, Input, Channel, Setup, and Hotel Setup. This lets you set nearly all of the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can change the settings in those menus so they are no longer standard.
¦¦ Hotel Plug & Play The Hotel Plug & Play function, which automatically performs the Hotel mode selection, Country Setup, Clock Setup, and Picture mode Setup, runs once when power is first turned ON. Setup also runs automatically after you have executed a Service Reset.
yy Hotel Plug & Play OSD –– Initially highlighted: Interactive –– If you select the Standalone Only button, the Standalone hotel mode is set by default and the “Standalone mode is set” OSD appears for 3 seconds. TV enters RF mode automatically after displaying the “Standalone mode is set” OSD for 3 seconds. –– If you select the Interactive mode, the Interactive Setup Menu is displayed. Press the power off key to exit from the Interactive menu.
¦¦ USB Software Upgrade Method Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hot line at 1-866-8940524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive containing the upgrade to the USB port located on the TV. When the software is upgraded, video and audio settings you have made will return to their default (factory) settings.
¦¦ Channel Bank Editor (Smoovie TV Only) The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to. The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each bank. SMOOVIE remotes have instalable Bank Cards which correspond to the channel banks in the Channel Bank Editor. The remotes only allow access to channels in the channel bank that correspond to the installed card.
Smoovie Set Up Sequence Smoovie TV Setup (Air/ Cable ) Step Only Air or Cable used Only Air or Cable used If the TV starts with Hotel Plug&Play If Hotel Plug&Play already done 1 Do a complete P&P (including Air or Cable auto tune) Enter the Hotel menu 2 After P&P, the TV displays the Hotel menu Select the channel type - ATV or ADTV for Air - CATV or CDTV for cable 3 Select the channel type - ATV or ADTV for Air - CATV or CDTV for cable Select Smoovie TV in the Hotel menu 4 Select Smoovie TV i
yy a Indicates an analog channel. yy Channels without an a are digital channels. ✎✎ If Dynamic SI in the Hospitality Option Menu is On, Channel Editor will display no digital channels. You must set Dynamic SI to Off before you can edit digital channels in Channel Editor. yy The guide at the bottom of the Channel Editor menu displays the remote buttons you need to press to apply Channel Editor functions. 1 Using the remote's up or down arrow key, highlight the channel that you want to edit.
When you press the TOOLS button, the following menu is available. yy Edit Channel Number Use Edit Channel Number to change the channel number of a channel you select. To change a channel number, follow these steps: 1. Select a channel on the Channel Edit screen. Channel TOOLS 2. Press the TOOLS button on your remote. a2 ----- (Cable) aChannel 10 CW Rename 3. Select Edit Channel Number in the Tools menu. All a3 ----- (Cable) Air 10-1 CW DTV Edit Channel Number 4.
The external sources of this TV are displayed in the last page of the Channel Editor menu as shown in the example below. In the example, there are two external sources connected to the TV, HDMI2 (DVI) and AV. –– You can assign a new analog channel to an external source by selecting the source on the last page, pressing the TOOLS button, selecting Edit Channel Number, and then using the up or down arrow button on the remote to select the channel number of the analog channel.
Installing the Wall Mount [ Wall or Ceiling Mounting If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product. Preparing before installing Wall-Mount (48" only) To install a wall-mount from another manufacturer, use the Holder-Ring. ✎✎The product shape may differ depending on the model.
Securing the TV to the Wall [ Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To Avoid the TV from Falling 1.
Anti-theft Kensington Lock The Kensington Lock is a device you can use to physically fix a TV to a location when you use it in a public place. The appearance and locking method may differ from the illustration at right, depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. 1 The Kensington Lock is not supplied by Samsung. ✎✎Please find a “K” icon on the rear of the TV. A Kensington slot is beside the “K” icon.
Specifications Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 50°F to 104°F(10°C to 40°C) 10% to 80%, non-condensing -4°F to 113°F(-20°C to 45°C) 5% to 95%, non-condensing HG28NC670 HG28NC677 Model Name Display Resolution 1366 x 768 Screen Size (Diagonal) 28" Class (28.0" measured diagonally) Sound (Output) 5W x 2 Dimensions (WxHxD) Body 25.3 x 15.6 x 2.5 (inches) 643.4 x 396.5 x 62.9 (mm) 25.3 x 17.1 x 6.4 (inches) 643.4 x 435.0 x 163.
Dimensions HG28NC670 / HG28NC677 ▪▪ Front view / Side view 7 1 2 3 4 5 6 1 25.3 2 24 3 13.7 4 15.6 (Unit: inches) 5 17.1 6 6.4 7 2.5 ▪▪ Jack panel detail / Rear view 1 5 6 2 4 3 (Unit: inches) 1 2.8 42 2 0.2 3 4.0 4 15.5 5 3.9 6 3.9 English [HC670_677_678-ZA]Install Guide-X0ENG.
HG40NC670/HG40NC677/HG40NC678 ▪▪ Front view / Side view 7 1 2 3 4 5 6 (Unit: inches) HG40NC670 1 35.7 2 34.9 3 19.7 4 21 5 22.7 6 8.9 7 2.6 ▪▪ Jack panel detail / Rear view 1 5 6 2 3 4 (Unit: inches) 1 4.6 2 1.3 3 7.7 4 24.4 5 7.9 6 7.9 English [HC670_677_678-ZA]Install Guide-X0ENG.
HG48NC670/HG48NC677/HG48NC678 ▪▪ Front view / Side view 7 1 2 3 4 5 6 (Unit: inches) 1 42.3 2 41.6 3 23.4 4 24.7 5 26.5 6 8.9 7 2.6 ▪▪ Jack panel detail / Rear view 1 5 6 2 3 4 (Unit: inches) 1 7.3 44 2 1.6 3 8.7 4 30.2 5 15.7 6 15.7 English [HC670_677_678-ZA]Install Guide-X0ENG.
▪▪ Base Stand detail HG28NC670 / HG28NC677 (Unit: inches) 12.3 12.3 6.4 4.9 6.4 4.9 HG40NC670/HG40NV677/HG40NC678/HG48NC670/HG48NV677/HG48NC678 (Unit: inches) 21.9 21.9 8.9 6.0 8.9 6.0 6.4 7.1 6.4 7.1 8.9 7.1 8.9 7.1 14.1 14.1 21.9 21.9 English [HC670_677_678-ZA]Install Guide-X0ENG.
▪▪ Base Stand detail HG28NC670/HG28NC677 (Unit: inches) R3.75(mm) 6.4 R9.50(mm) 1.2 12.3 HG40NC670/HG40NC677/HG40NC678/HG48NC670/HG48NC677/HG48NC678 (Unit: inches) 21.9 8.9 2.6 5.3 R9.50(mm) R3.75(mm) 6.0 21.9 8.9 46 6.0 English [HC670_677_678-ZA]Install Guide-X0ENG.
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
This page is intentionally left blank. 48 English [HC670_677_678-ZA]Install Guide-X0ENG.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country CANADA U.S.A Customer Care Center 1-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) [HC670_677_678-ZA]Install Guide-X0ENG.indd 49 Web Site Address www.samsung.com/ca/support (English) Samsung Electronics Canada Inc. 2050 Derry www.samsung.com/ca_fr/support (French) Road West, Mississauga, Ontario L5N 0B9 Canada www.samsung.