LED TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model [Hotel-XC]BN68-04282R-00Eng.indd 1 Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Instruction This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled system for hotels and other hospitality businesses.
Contents Instruction.................................................................................................................................................................. 2 Operational Modes.................................................................................................................................................... 2 Still image warning............................................................................................................................................
Accessories ✎✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎✎The items’ colour and shapes may vary depending on the models. yy Remote Control & Batteries (AAA x 2) yy Quick Set up Guide yy Safety Guide (Not available in all locations) yy Cleaning Cloth yy Power Cord / Data Cable ✎✎The stand and stand screw may not be included depending on the model. ✎✎The Data Cable may not be included depending on the SI Vendor.
Installing the LED TV Stand The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right or 90 degrees left and right. The 26” LED TVs do not have swivel stands. Stand Components When installing the stand, use the provided components and parts.
Viewing the Connection Panel 6 @# 4 7 8 5 9 1 2 0 $ HDMI IN3 HG32EA790** iu][TWX`]Wh HG40EA790** HG46EA790** HG55EA790** HG32EA590** HG40EA590** HG46EA590** 7 ! % 4 3 3 6 @# 7 8 5 9 1 HDMI IN3 Power Input HG32AA690** iu][TWX`]Wi HG40AA690** HG46AA690** HG55AA790** 4 4 0 7 Power Input % 6 @# 7 8 5 9 1 0 HDMI IN3 4 iu][TWX`]Wj HG32AA690** HG40AA690** HG46AA690** HG55AA790** 3 ! 4 7 Power Inpu
1 VARIABLE AUDIO OUT: Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA). (Not available for 22 inch model.) 2 VOL-CTRL: Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOL-CTRL port. 3 ANT 1 IN, ANT 2 IN(SATELLITE), ANT 2 IN(CABLE): To view television channels correctly, a signal must be received by the set from one of the following sources.
✎✎Optimal resolution is 1920 X 1080 @ 60 Hz. Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IBM 640 x 350 720 x 400 31.469 31.469 70.086 70.087 25.175 28.322 +/-/+ MAC 640 x 480 832 x 624 1152 x 870 35.000 49.726 68.681 66.667 74.551 75.062 30.240 57.284 100.000 -/-/-/- VESA CVT 720 x 576 1152 x 864 1280 x 720 1280 x 960 35.910 53.783 56.456 75.231 59.950 59.959 74.777 74.857 32.750 81.750 95.750 130.
0 COMPONENT IN / AV IN 1, AV IN 2 –– Connects Component video / audio. –– Connect component video cables (optional) to the component jacks ("PR", "PB", "Y") on the rear of your TV and the other ends to corresponding component video out jacks on the DVD. –– If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the DVD to the component jacks ("PR", "PB", "Y") on your TV.
TV Controller TV Controller is a multi directional button that helps navigate without remote control. ✎✎Some functions which require a PIN code may not be available. ✎✎The product colour and shape may vary depending on the model. ✎✎Exits the menu when pressing the controller more than 1 second. ✎✎When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller.
Viewing the Remote Control ✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and Volume buttons. POWER SOURCE Turns the TV on and off. Display and select the available video sources. Selects the HDMI mode directly. HDMI Have direct access to channels. Alternately selects Teletext, Double or Mix. PRE-CH TTX/MIX Return to the previous channel. Cut off the sound temporarily. Adjust the volume. Change channels.
Connecting the TV with SBB TV Rear Panel Data Cable ETH MODEM 1. Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable. ✎✎ Use data communication. 12 English [Hotel-XC]BN68-04282R-00Eng.
¦¦ List of Vendors and Compatible Data Cables Supplied with the TV yy Confirm you are using the correct data cable for your vendor. Refer to the code label on the data cables. English [Hotel-XC]BN68-04282R-00Eng.
Connecting the Bathroom Speakers You can connect the Bathroom Speakers in the following method. ¦¦ Connecting through the Variable Output (available without an external amplifier) TV Rear Panel 1 Speaker 2 VOL+ Volume Control Box VOL- 1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. Speaker + Speaker - N/C 2. Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
¦¦ Audio Loop In An additionally created Headphone Box can be installed on a bed or business desk so that users can use it conveniently. The installation procedures are given below. yy Detailed Drawing of the Headphone Box. TV Rear Panel HEADPHON BOX Headphone Box Shield wire Red Wire (Audio-R) Red wire + White wire TV Headphones jack Whitewire (Audio-L) Shield Wire TV HP-ID jack English [Hotel-XC]BN68-04282R-00Eng.
Connecting the MediaHub HD Output of any external source connected to MediaHub HD on hotel desk. TV Rear Panel MediaHub HD Rear HDMI USB RS/232 2 HDMI cable 1 RS-232 Data Cable 1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD. 2. Connect the HDMI IN (1(DVI) or 2) port of the TV and the HDMI port of the MediaHub HD. yy MediaHub HD –– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB) and corresponding outputs.
Connecting the RJP (Remote Jack Pack) Output of any external source connected to RJP on hotel desk. 4 HDMI cable USB HDMI TV Rear Panel VIDEO AUDIO AUDIO/PC RS/232 RJP Rear 5 2 Audio Cable 1 D-sub / PC Audio cable 3 Video Cable 1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP. 2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP. 3. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP. 4.
✎✎ When the TV is on, connect the TV and the RJP within 10 seconds. yy The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10 seconds. All LEDs blink 5 times to Acknowledge that the rest has been performed. yy The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart.
Setting the Hotel Option Data To Enter: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.) To Exit from this menu : power off and turn on again. No 1 2 Hotel TV Function Category Hospitality Mode SI Vendor Power On Channel EN Power On Channel Power On Select the Hotel TV mode. (Standalone / Interactive) Select the SI Vendor TV will turn on to particular Channel. 1 TV will turn on to this particular Channel.
No Hotel TV Function Category 5 My Channel 6 7 Menu OSD Operation My channel En Genre Editor initial value OFF Picture Menu Lock OFF Menu display ON Panel Button Lock Unlock Subtitle Auto On OFF 8 Clock Local time Manual Music Mode AV OFF Music Mode PC OFF 9 Music Mode Music Mode Comp OFF Music Mode Backlight OFF 7610 Priority AV 1 7610 Priority PC 2 10 External Device 7610 Priority HDMI 3 7610 AV Option AV1 RJP HDMI HDMI1/DVI Option Sound Bar Out OFF 20 Description Set th
No Hotel TV Function Category initial value USB Media Mode 11 12 13 14 15 External Source Default External Source Banner ON Auto Source OFF Logo/Message Control Pop-Up menu at USB insert to TV. Users can set External Source Banner to On or Off. On : When TV power On or Mode changed, TV will disply the external source banner. Off : When TV power On or Mode changed, TV will not disply the external source banner.
No Hotel TV Function Category initial value SIRCH Update Time SIRCH Update Immediate Manual SIRCH 16 17 18 22 SIRCH Network 1hour OFF - Description Standby SIRCH will be operated, according to time setting Make TV operate SIRCH after 1 minute in Stand-by mode.
¦¦ Welcome Message Welcome message is a feature to display custom message on TV, every time TV is turned on by Guest in Hotel room. –– Welcome message settings are placed in Hotel Option Menu. –– Welcome message should be ON in order to display the message on power on.
¦¦ Hotel Logo The Hospitality Logo function displays the Hotel's picture image when the TV is powered on. –– Hospitality Logo settings are in the Hospitality mode menus. –– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. –– If there is a logo image stored in the memory and Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on.
¦¦ USB Cloning USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload the same to other TV sets. All the user-defined settings from the TV (Master Set) can be copied to the USB device. yy Cloning from TV to USB: It is an operation to copy the stored data from the specific area on the EEPROM from the TV set to the USB device. 1. Insert a USB drive into the USB port on the rear of the TV. 2.
¦¦ Plug & Play Hotel Plug & Play is a function that automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup once. –– Hotel Plug & Play is available only one time when power is first turned ON. –– After setting up first TV and Clone TV to USB –– Next TV only needs to exit Hotel Plug & Play, connect USB, then Clone USB to TV. If Standalone Only is selected Setup > Start Easy Set up After Plug & Play is completed, TV will be set to standalone mode.
yy Plug & Play OSD –– Initial Highlight: Interactive –– If Standalone Only button is selected, the Standalone hotel mode is set by default and “Standalone mode is set” OSD is displayed for 3 seconds. –– TV enters into RF mode automatically after displaying “Standalone mode is set” OSD for 3 seconds. –– When Interactive mode is selected, Interactive Setup Menu is displayed. Press power off button to exit from Interactive menu.
¦¦ Multi Code Remocon Multi Code Remocon is a special transmitter which is designed to control each TVs with one remote. This function is useful where there is more than one TV in one location like hospital Set ID number will be displayed in source osd. It is possible to support up to 9 different remote key transmission for multi code. Initial ID code which each TV has is “0”. –– ID code could be set and reset in Analog TV mode or PC mode.
¦¦ CH Bank Editor (Smoovie TV Only) Channel Bank Editor is a function to edit the channel with 3 different Bank Options. Depending on the Bank card, there are specific channels Hotel customer can enjoy. Setting the CH Bank Editor under Stand-alone Mode 1. Enter the Hotel Standalone menu by “MUTE+1+1+9+Enter” 2. Please select SI vendor : “Smoovie” 3. You will be able to find new menu option “CH Bank Editor” 4.
¦¦ Channel Editor Channel Editor is a function to edit channel number and name. –– Use Channel Editor to sort the channels as user-desired channel numbers.
Smovie TV used( Satellite ) Mixed Channel Map On (Satellite and Air or Cable both usedused) Only Satellite used If the tv starts with Hotel P&P If P&P alredy done If the tv starts with Hotel P&P If P&P alredy done 1 Do the P&P except channel store Enter Hotel menu Do the P&P all ( Air or Cable auto tune) Enter Hotel menu 2 After P&P TV will show hotel menu Setup Mixed Channel Map On after P&P TV will show hotel menu Select channel type - ATV or ADTV for Air - CATV or CDTV for cable 3 Setup
How to use Schedule Viewing in Channel List (digital channels only) When you set the Schedule Viewing in Channel List, you can only set the programme in Programme View. 1. Press the CH LIST button, then select a desired digital channel. 2. Press TOOLS button, and then select the Programme View. The programme list for that channel appears. 3. Press the ▲ / ▼ buttons to select the desired programme, then press the ENTERE (Information) or INFO button. 4.
¦¦ My Channel Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows the corresponding channels. yy You must select the country first, or you can NOT set a genre. yy If you select the genre that NOT added any channels, Channel list display all of channels. yy My Channel works in Standalone mode only. yy SI Vendor in Standalone mode: This des not work if Smoovie is selected.
✎✎Notes xx This section describes the layout of Front UI that appears when TV is turned on. (Factory Mode > Genre Mode: Enable) xx The genre is sub-list of each country. xx The broadcast screen that was being displayed the last memorial channel. –– If user want to keep previous country & genre channel map, presses ‘BLUE’, RETURN, EXIT remote-control key to close the Front UI. ✎✎Etc.
Highlight Interaction [Country Items] • This page is only for interaction. Each screen may not be exactly identical to actual one. ✎✎Notes 1 xx User can navigate the list items in each country & genre list by pressing the up or down remote control keys. xx Circular navigation is supported.
Highlight Interaction [Default Genre] • This page is only for interaction. Each screen may not be exactly identical to actual one.
Mode Change Interaction 1 (1/2) • This page is only for interaction. Each screen may not be exactly identical to actual one.
Mode Change Interaction 1 (2/2) • This page is only for interaction. Each screen may not be exactly identical to actual one. 5 6 1 My Channel Current status : All Country/Sports Country 1 ENTER Info Genre ▲ Genre Mode change to Austria/News. All Country All Austria News Belgium (Dutch) Entertainment Belgium (French) Hotel Czech OK France Germany ▼ Navigation Help Area y y The genre mode change complete message is displayed. Timeout(5 sec.
Mode Change Interaction 2 (1/2) • This page is only for interaction. Each screen may not be exactly identical to actual one.
Power On Scenario [Last Memory] • This page is only for interaction. Each screen may not be exactly identical to actual one. 1 Current Status : Austria / News POWER Power Off yy Current Genre Mode : Austria / News POWER My Channel Current status : All Country/Sports Country Genre ▲ All Country All Austria News Belgium (Dutch) Entertainment Belgium (French) Hotel Czech France Germany ▼ Navigation Help Area yy Current Genre Mode : Austria / News 40 English [Hotel-XC]BN68-04282R-00Eng.
Genre Editor (This configures the genres of each of the hotel TV channels.) yy This can be used through the Hotel Menu (Factory). yy Supported genres include News, Radio, Entertainment, Sports and Hotel. yy More than one genre can be selected for each channel at the same time. Country Editor (Channel Editor): This is the editor that configures the country for each of the hotel TV channels.
Elements No Name Description yy yy When the user enters this screen, the currently selected default item is highlighted. The Country Icon + Category Name are provided. (If the highlight is in the Main Frame, only the icon is displayed.) yy Moving the highlight –– Pressing the up or down button moves the highlight. –– If the items cannot be displayed on one page, up and down indicators are provided.
✎✎Notes xx This is a definition of the Tools menu in the Left Frame Category. xx Only the Info item for each Register/Country is provided. Elements Category Tools menu Descriptions Registered, Country Information Registered Channels. The number of channels of each country. • The items are displayed without ‘Channel’. Error Cases ✎✎Notes xx This is the message for when there are no saved channels in the Registered Channels list.
✎✎Notes xx This is the component for when there are no channels registered to the country category. Elements No Description Description yy The message is displayed when the currently selected country does not contain any items. Main Frame [Channel Browser] 44 English [Hotel-XC]BN68-04282R-00Eng.
Key Guide Button Action Nav. Help CH UP/DOWN Moves the page. Page ENTER Selects or enters the corresponding Channel Browser area. Select RETURN Returns to the previous step (Factory Mode). Return UP/DOWN Moves the highlight up or down. (No Guide) RIGHT Moves the highlight to the Channel Browser area. (No Guide) INFO Shows the Category Info. (No Guide) TOOLS Shows the utility function menus. Tools EXIT Cancels and returns to the previous step (Factory Mode).
Channel Common Elements [+ Icon-method] Channel list representation rules Standard Item Construction Digital channels • Check Box + Status Icon + Digital Channel Number + Channel Name –– Channel number representation format: ###-### (The channel number is represented by ‘-’.) Analog channels • Check Box + Analog Icon + Analog Channel Number + Channel Name –– Channel number representation format: ### (‘-’ is not used to represent analog channel numbers.
Add to Countries / Edit Countries (1/2) • Channel Manager > Browser > Tools > Add to Countries Key Guide Button Action Nav. Help ENTER Selects the highlighted item. Enter RETURN Cancels and returns to the previous screen (Tools). Return UP/DOWN Moves the highlight over country items. Move LEFT/RIGHT Moves the highlight. Move INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode).
Elements No Name Description 1 Add to Countries Window • If there are no channels that have been registered to the country list in the selected channels, “Add to Countries” is displayed as the title. • A check box is displayed depending on whether the country that was selected when entering the screen is registered or not. 2 Guide 3 Selection Info 4 Complete Message 5 Selection Mark • The number of the selected channel or the channel name.
✎✎Notes xx This is the definition for Edit Countries. xx The highlighted channel item or more than one selected channel item is added or deleted from the Country category. ✎✎Etc. xx Timeout (60 sec) Elements No Name 1 Add to Countries 2 Guide 3 Complete Message Description yy If there is a registered channel among the selected channels, Edit Countries is displayed as the title. yy A check box is displayed depending on whether the selected country is registered or not.
Elements No 1 Name Edit Channel Number Window Description yy Both the numeric keys and the Up/Down keys are supported. –– Selected Channel: Shows the currently selected channel name. –– Number: Shows the new channel number. (The currently allocated channel name is also displayed.) –– Name: Shows the currently allocated channel name. (If there are no channels, it is displayed as “(Empty)”.) : If there is a channel but it does not have a name, the name is represented as “-----”.
Key Guide Button Action Nav. Help RED If a user presses the button, the channel number is initialized. Reset ENTER Applies the changes and closes the window. Enter RETURN Cancels or returns to the previous screen (Tools). Return U/D Changes the channel number of the selected channel. Adjust 0~9T Enters a digit. Number INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode).
Edit Channel Name • Channel Manager > Browser > Tools > Edit Channel Name Key Guide Button Action Nav. Help GREEN Saves the changes and returns to the Channel Manager. Done ENTER Saves the channel name and moves the cursor to the next field. Enter RETURN Cancels and returns to the previous screen (Tools). Return U/D/L/R Navigates on the keyboard. Move 0~9 Enters a digit. (No Guide) INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu.
Tools [Edit Mode] Edit Mode Content Highlight (when the number of the checked item is 0 or 1) Add to Countries Edit Countries (when an already-registered item is checked.) Channel Name Edit Edit Channel Number Video Mute Channel Copy (Astra HD +) Reorder (Satellite) Select All Deselect All (this is only displayed when 1 or more items are selected) Delete When there is more than one checked item. Add to Countries Edit Countries (when an already-registered item is checked.
CH Banner [when a channel number is allocated to an external input] ✎✎Notes xx The TV channel banner specifications are applied. xx When there is an unsupported item or there is no corresponding information, the item values are not displayed. xx The channel name is represented as the ‘external input name’. Elements No Name 1 External Input Name Description The Channel List provides some functions of the GenreTV. yy Country Mode yy Changes the genre mode.
¦¦ Sound Bar yy Samsung Sound-Bar & Hospitality TV in 2012 –– Samsung Sound-Bar & hospitality TV support HDMI 1.4, so you can listen to TV’s sound on Sound-Bar by using single HDMI cable. –– Supporting model. yy Sound-Bar : HW-E350/E450/E550 yy The operation of “Hotel mode” in Sound Bar –– The following items of TV’s hotel option menus should be set in advance.
SIRCH yy Introduction SIRCH (Samsung Interactive Remote Control for Hospitality) is a professional interactive remote controller for DTV that lets you deliver TV firmware updates, cloning data, and channel mapping changes to several hundred hospitality TVs simultaneously. Mounted at the broadcast head-end system in hotels, motels, resorts, hospitals, and apartment buildings, it delivers modulated RF control signals to hospitality sets in each guest room through coax cable.
yy SIRCH operating Diagram Hotel Installer can edit the Install Menu/ Channel Map data using the SIRCH windows application program. TCP/IP RF (Windows Remote Access) Coax. Cable You can updated all hospitality TVs in an entire installation. This includes delivering TV firmware, channel mapping, and settings. yy SIRCH Installation Considerations There are a number of factors and operations you need to consider when you set up and run SIRCH: 1.
¦¦ GENERAL INFORMATION yy System Overview The ‘Samsung Interactive Remote Control for Hospitality (SIRCH)’ application is a Remote Control Update system for the better and cost effective service to Hospitality industries. This will allow user/operator to configure the guest TV with RF distributing system. Application will help user to set and configure the guest room TV Set parameter. The created setting file will get used by SRCUS for configuration of guest TV.
¦¦ GETTING STARTED yy Installation instructions for Windows XP/Vista/2007 1. To install Samsung Interactive Remote Control for Hospitality (SIRCH), locate and open the setup directory of SIRCH and double-click on the file “setup. exe”. 2. Click on Next Button to proceed for Installation wizard of SIRCH. 3. Read the license agreement carefully and select “I accept the terms in the license agreement” and click on Next button. 4. Please enter User and Organization information and click on Next to proceed.
6. Choose the setup type (Complete / Custom) that best suits your needs. Complete is recommended for users as it will install all program features. 7. The wizard is ready to begin installation. Click on Install to begin the installation. 8. After installation process completes, Click Finish to exit the wizard. 9. After clicking on finish a desktop icon is made for launching SIRCH application and also it is added in your Start Menu → Programs. yy Launching/Starting SIRCH Application 1.
yy Create New Clone Files After launching SIRCH, application will show a window asking for Model and Mode selection. Application starts with the utility to create new clone files thus other utilities can be called from File Menu. To create new files user may follow the following steps: 1. To create new file, either launch SIRCH.exe or choose Create New File from File Menu. 2. Select series, region, LCD/LED type of the model from the drop down boxes.
yy Modify existing Clone files To modify the existing clone files user must follow the following steps: 1. Go to File Menu → Load from file. If the option is disabled user is probably on the next screen so he must come back to main screen by clicking back button. 2. After clicking on Load from file, a browser window will open which will ask user to locate clone file folder. User must locate the immediate parent folder of the files not the folder named with version no. 3. After locating files click on OK. 4.
yy Hospitality Options Setting After clicking “Proceed” button, application will navigate user to next screen with different tabs (Hospitality Options, channel map and generate). User can navigate to other Tabs , this will not lead to any loss of unsaved data. To modify factory menu settings user may follow the following steps: 1. Select Hospitality Options Tab. 2. Application will show Blue labels and drop down boxes in front of each labels which have their different values. 3.
yy Channel Map Configuration Channel Map tab shows a list of channels in a table where for every channel, channel name, PTC no., Program No., Modulation and Program Type are shown. Channel map information is only configured for English language. Though channel names in any other language in clone file loaded from TV will remain undisturbed after changes from SIRCH application. Channel category is a list of options for Air, Cable, Satellite and All, at left of the table.
yy Modify an existing Channel from the list To modify parameters (like PTC no., Program type, etc) of an existing channel from the list user must follow the following steps: 1. Select Air, Cable or Satellite whichever type of channel user wants to edit. 2. Select Analog or Digital. 3. Select the channel from the list to Modify and click on Modify button. 4. Modify the respective fields and drop down boxes for the channel to edit. 5.
yy Saving Clone Files To save the clone files with modified parameters and channel map configuration user must follow the following steps: 1. When user has done all the changes in Interactive/Standalone menu and in Channel map, click on the Save Button. 2. A browser window will open, which will ask for location to save the clone files. 3. Select the folder where clone files should be saved or make a new folder and click Ok. 4. After clicking Ok files will be saved with inside a folder named with version no.
yy Launching Ventus application Go to File Menu → Utility → Generate and click on GO for Launch Ventus yy Upgrading clone or binary file on TV To upgrade the clone for binary file on TV, keep prepared merged stream (Binary_outputstream.mpg or clone_ outputstream.mpg). 1. Locate stream file in Modulator utility ( as explained in 2.11). 2. Set the set channel to broadcast the stream by clicking on Frequency Table. 3. Select Opencable for ATSC or DVB-C for DVB models. 4.
yy Update SIRCH Version To update SIRCH version for Clone and user should follows as below. 1. Go to File Menu → Update Software Version. 2. A window will open which ask for Software Version (Clone File Up gradation). 3. User should provide higher version than TV version in version value. E.g. i) If software version is set as 01a0 in SIRCH PC application, then current TV SIRCH version should be less than this value for update. 4. Software version value for clone should in hexadecimal format e.g.
yy FAQs If SIRCH seems to have a problem, first review this list of possible problems and solutions. yy Test SIRCH modulator controller settings: - The SIRCH upgrade only support OpenCable & DVB-C - Recommended setting - Parameters Constellation: 64 QAM - Remux(H/W) : Off - SIRCH Frequency should be matched SIRCH Channel of TV. - If you change frequency table, please refer the frequency table in SIRCH manual (Appendix A). - You should set same channel in both SIRCH PC program and in TV. For ex.
yy Test version information while merging files into stream : - To merge clone files ensure while merging SIRCH clone version in SIRCH PC program should be greater than the SIRCH version stored in TV. - To merge binary file ensure the binary merged into the stream has higher version than the binary already updated in TV. - TV SIRCH version should be less than SIRCH PC application value for update. - PC application: SIRCH Version (Clone): 0002, TV SIRCH Version: 0001. Update is possible.
yy Merged TS Stream should be located in D:\stream\OpenCable(US) or D:\stream\DVBC(EU) - You can check displaying SIRCH merged stream if you tune SIRCH channel. English [Hotel-XC]BN68-04282R-00Eng.
yy Cautions for Hospitality mode options - Hospitality Mode: should be Standalone. – Interactive mode could not support SIRCH. - Power On Source must be set TV. If you select others external source, SIRCH cannot support upgrade. - If you try to upgrade SIRCH in external source (PC/HDMI…), SIRCH could not support upgrade by manual SIRCH / SIRCH Update Time. - SIRCH Upgrade Time: not off. - Dynamic SI should be set ‘Off’ to modify DTV display channel map in channel map tap.
Installing the Wall Mount The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. We do not advice you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. To lock the product, follow these steps: 1 ✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon. 1.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Centre AUSTRIA 800-112233 FINLAND 0771-400002 FRANCE 0825-022062 GERMANY 01805-471101 HUNGARY 0640-985985 ITALIA 800-194194 NETHERLANDS 015-2197000 POLAND 0-801-B2BSAM (222726) PORTUGAL 808-B2BSAM SPAIN 0902024-010 UNITED KINGDOM +44 (0) 845 8414141 SOUTH AFRICA 0860-SAMSUNG (726-7864) U.A.