460/470/570/670 LED TV Installation manual Thank you for purchasing this Samsung product. To ensure full warranty coverage, please register your product at www.samsung.com Model Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ in appearance from the actual product. Product design and specifications may be changed without notice. Instruction This TV offers an interactive functionality through a set-back box (SBB/STB) that is connected to the TV, and can be connected with other TVs in a computer controlled system for hotels and other hospitality businesses.
Contents yy Installing the LED TV Stand........................................................................................................................................ 4 yy Assembling the swivel................................................................................................................................................. 15 yy Overview of the Connection Panel............................................................................................................................
Accessories ✎✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎✎ The colors and shapes of the following items may vary depending on the model.
2 3 HG32EE470/HG32AE570/HG40EE470/ HG48EE470 HG28EE470 X X O O OO ✎✎ Place a soft cloth on a table to protect the TV, and then lay the TV flat on the cloth, screen side down. ✎✎ Insert the Stand Guide into the slot on the bottom of the TV.
HG28EE460 A B C Stand Guide Stand x4 (M4 X L12) 1 C x7 (M4 X L12) 2 Screws 3 C x3 (M4 X L12) Front B A TOP View ATTENTION DO NOT USE CHEMICALS DO NOT USE GREASE DO NOT USE OIL ✎✎ Place a soft cloth on the table to protect the TV, and then lay the TV flat on the cloth, screen-side down. ✎✎ Insert the Stand Guide into the slot on the bottom of the TV.
HG40EE460/HG40AE460/HG48AE460/HG43AE570/HG48AE570 R L A B L: 1EA R: 1EA C 2EA Stand Guide Stand 1 2 x4 (M4 X L12) Screws 3 C x4 (M4 X L12) 5 4 XX X X Y Y X 6 Y Y X Y Y HG32AE570 B A C Stand Guide Stand (M4 X L12) Screws 1 C x4 (M4 X L12) English 7
2 3 C 8 English x3 (M4 X L12)
HG32AE570 A B Stand 1 x4 (M4 X L12) Screws 2 x2 (M4 X L12) x2 (M4 X L12) 3 English 9
HG43AE570/HG48AE570 A B C Stand Guide Stand Screws 1 2 3 x4 (M4 X L12) 10 English x4 (M4 X L12)
HG58AE570 B A x8 (M4 X L12) C Stand Guide Stand Screws 1 C x4 (M4 X L12) 俯视图 B 正面 A 注意 背面 请勿使用化学品 2 请勿使用润滑脂 请勿使用润滑油 3 X X O O 4 x4 (M4 X L12) x4 (M4 X L12) English 11
HG49AE570 B A Stand C 4EA: M4 X L12 (粗螺纹) C 4EA: M4 X L12 (细螺纹) Guide Stand Screws 1 2 C 4EA: M4 X L12 (粗螺纹) 俯视图 B 正面 A 注意 背面 请勿使用化学品 请勿使用润滑脂 请勿使用润滑油 3 O O X X 4 C 12 English 4EA: M4 X L12 (细螺纹)
HG**AE570(Excluding China and Hongkong) A B Stand Guide Stand C 1-1 C or x4 (M4 X L12) (M4 X L12) Screws 1-2 B A Attention DO NOT USE CHEMICALS 1-3 DO NOT USE GREASE DO NOT USE OIL C ✎✎ Place a soft cloth on the table to protect the TV, and then lay the TV flat on the cloth, screen-side down. ✎✎ Insert the Stand Guide into the slot on the bottom of the TV. ✎✎ Slide and assemble it to the end line in the direction of the arrow.
HG**EE670 A 1 EA B 1 EA 32" 32"~55" Stand C 40"~55" Guide Stand 1 Screws 1-1 x4 (M4 X L12) C 32" x7 (M4 X L12) 40"~55" x8 (M4 X L12) B 1-2 A 1-3 ✎✎ Place a soft cloth on the table to protect the TV, and then lay the TV flat on the cloth, screen-side down.
Assembling the swivel Some models support the swivel function. Supported swivel angles are 20°, 60° and 90°, and you can change the swivel angle using BRACKET HOLDER SWIVEL.
Hotel Mount Kit (Not included with all models) Bolt + Nut Short Bolt (2EA) Long Bolt (2EA) Nut (2EA) Washer (2EA) Top Bottom Affix the stand to a flat surface such as a dresser top, desk top, or entertainment center, as shown in the figure. WARNING: To prevent injury, this apparatus must be securely attached to the floor/ table in accordance with the installation instructions.
Overview of the Connection Panel HG24EE470 5 @ PC / DVI AUDIO IN HDMI IN (ARC) RJP AV IN VIDEO # (5V 0.5A)/ CLONING ! COMMON INTERFACE % ANT IN DATA HP-ID 1 3 4 $ HG28EE470 2 1 7 DATA PC/ /DVI DVI PC AUDIOININ AUDIO 3 CLOCK ! COMMON INTERFACE @ HDMI IN (DVI/ARC) # (5V 0.
HG32EE470 % 5 7 RJP PC / DVI AUDIO IN # (5V 0.5A)/ CLONING ! COMMON INTERFACE $ ANT IN PC / DVI AUDIO IN AV IN VIDEO CLOCK 8 PC IN HDMI IN (DVI/ARC) @ DATA HP-ID 1 4 3 1 HG40EE470 HG48EE470 7 DATA PC / DVI AUDIO IN AV IN ! COMMON INTERFACE @ HDMI IN (DVI/ARC) # (5V 0.
HG24EE460 5@ $ 6 RJP HDMI IN (ARC) # USB (5V 0.5A) / CLONING AUDIO ! COMMON INTERFACE 5@ $ 6 ANT IN 4 3 HP-ID 4 3 6 RJP HDMI IN (ARC) # ! USB (5V 0.5A) / CLONING COMMON INTERFACE 7 PC/DVI AUDIO IN AUDIO $ USB (5V 0.5A) / CLONING ANT IN ! HP-ID ANT IN RJP 4 3 6 65 PC/DVI AUDIO IN HP-ID PC IN 8 5 PC IN AUDIO ANT IN @ 65 ANT IN USB (5V 0.
! ! @ COMMON INTERFACE COMMON INTERFACE HDMI IN (DVI/ARC) HP-ID USB (5V 0.5A) / CLONING $ ANT IN 8 4 3 HP-ID PC IN ANT IN AUDIO # ! 7 PC/DVI AUDIO IN AUDIO 4 3 6 RJP 5 COMMON INTERFACE 7 PC/DVI AUDIO IN 65 @ # # USB (5V 0.5A) / CLONING $ ! COMMON INTERFACE 8 RJP HP-ID PC IN AUDIO USB (5V 0.5A)/CLONING HDMI IN (DVI/ARC) PC/DVI AUDIO IN 7 RJP 5 8 ANT IN PC IN AUDIO 65 HDMI IN (DVI/ARC) @ HP-ID USB ANT IN (5V 0.
! COMMON INTERFACE @ HDMI IN (DVI/ARC) # USB (5V 0.5A) / CLONING $ ANT IN 7 PC/DVI AUDIO IN 8 HP-ID PC IN AUDIO RJP HG32EE670 HG40EE670 HG49EE670 HG55EE670 5 4 6 8 PC IN HP-ID 3 1 2 PC/DVI AUDIO IN AUDIO DATA VARIABLE AUDIO OUT VOL-CTRL CLOCK 7 9 0 RJP 5 HG32AE460 5 # PC / DVI AUDIO IN (5V 0.
HG32AE460 (TAIWAN) 5 (5V 0.5A)/CLONING # RJP PC/DVI 音訊輸入 7 AV IN 輸入 PC 輸入 視訊 左 8 音訊 右 HDMI 輸入 (DVI/ARC) @ HP-ID ANT 輸入 $ 6 4 3 HG40AE460 (TAIWAN) 3 4 6 B PC/DVI 音訊輸入 7 AV IN @ 輸入 HDMI 輸入 (DVI/ARC) RJP 音訊 (5V 0.
HG32AE570 5 (5V 0.5A)/CLONING # RJP PC / DVI AUDIO IN 7 AV IN VIDEO 8 PC IN AUDIO 6 HDMI IN (DVI/ARC) @ HP-ID DATA ANT IN $ 4 3 1 HG40AE570 HG43AE570 HG48AE570 1 DATA PC / DVI AUDIO IN @ HDMI IN (DVI/ARC) # (5V 0.
HG32AE570 HG43AE570 HG48AE570 (HONGKONG) 1 DATA PC / DVI AUDIO IN 7 HDMI IN 2 (DVI) VIDEO @ HDMI IN 1 (ARC) 3 8 PC IN # VIDEO 4 HP-ID RJP 5 9 VOL-CTRL 0 AUDIO AUDIO DOOR-EYE VARIABLE AUDIO OUT (5V 0.5A) / CLONING $ ANT IN 6 HG32AE570 (CHINA) 5 RJP (5V 0.
HG43AE570 HG48AE570 HG58AE570 (CHINA) 1 DATA 分量/AV 输入2 @ HDMI 输覂 2 (DVI) HDMI 输覂 1 (ARC) 3 PC 输入 7 8 AV 输入1 (5V 0.
HG49AE570 HG32AE570 (ASIA) 1 @ # 7 4 3 @ 8 $ 5 26 English 6
✎✎ Whenever you connect an external device to your TV, make sure that power to the unit is turned off. ✎✎ When connecting an external device, match the color of the connection terminal to the cable. 1 DATA −− Used to support data communication between the TV and the SBB. −− Connects using RJ-12 TV type plugs. 2 CLOCK Set the time after connecting the cable of the External Clock to the Clock jack. You can use the External Clock Display function.
@ HDMI IN (ARC), (DVI/ARC) Connects to the HDMI jack of a device that has an HDMI output. −− No audio connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video. −− Use the HDMI IN (DVI) jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio. # USB (5V 0.5A) / CLONING −− Connector for software upgrades, Media Play, etc.
✎✎ Optimal resolution is 1920 x 1080 @ 60 Hz. Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IBM 720 x 400 31.469 70.087 28.322 -/+ MAC 640 x 480 832 x 624 1152 x 870 35.000 49.726 68.681 66.667 74.551 75.062 30.240 57.284 100.000 -/-/-/- VESA CVT 720 x 576 1152 x 864 1280 x 720 1280 x 960 35.910 53.783 56.456 75.231 59.950 59.959 74.777 74.857 32.750 81.750 95.750 130.
Using the TV’s Controller The TV Controller, which is a small joystick-like button at the right of the back of the TV, lets you control the TV without the remote control. There are two types of TV Controller. The first type is operated as follows. Selecting Media Play Selecting the Menu Selecting a Source Function menu Remote control sensor Power off TV Controller The image is drawn by facing the front side of the TV. ✎✎ Some functions which require a PIN code may not be available.
Viewing the Remote Control ✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons, to support use by the visually impaired. Turns the TV on and off. Display and select available video sources. Directly enter a channel number. Toggle between Teletext, Double or Mix. TTX/MIX GUIDE Adjust the volume. Electronic Programme Guide (EPG) display. Cut off the sound temporarily. Changes the current channel. CH LIST Display channel list on the screen. Switch to the HOME Screen.
Turns the TV on and off. Display and select available video sources. Directly enter a channel number. Not available. PRE-CH Returns to the previous channel. Turns the sound on and off. Adjust the volume. CH Display channel list on the screen. Display the main on-screen menu. Quickly select from frequently used functions. Moves the cursor, selects the onscreen menu items, and changes the values seen on the TV’s menu. CH LIST 㰣虝 HOME 虡擖 䯍㽟 Switch to the HOME Screen.
Turns the TV on and off. Display and select available video sources. Directly enter a channel number. Returns to the previous channel. Cut off the sound temporarily. Adjust the volume. Changes the current channel. Display channel list on the screen. Display the main on-screen menu. 㟣 Quickly select from frequently used functions. Moves the cursor, selects the onscreen menu items, and changes the values seen on the TV’s menu. ᇗ࢞ 㸂㴖 定時: Enter the hour you want the TV to turn on.
Using the Sports Mode Sports Mode t OO MENUm → Applications → Sports Mode → ENTERE This mode provides optimized viewing condition for watching sports games. yy a (Zoom): Pause playback and divide the picture into 9 parts. Select a part to zoom it in. Press this button again to resume. ✎✎ When Sports Mode is On, the picture and sound modes are set to Stadium automatically. ✎✎ If you turn the TV off while watching in Sports Mode, Sports Mode will be disabled.
Connecting the TV to a SBB or STB TV Rear Panel RJP PC / DVI AUDIO IN AV IN VIDEO AUDIO PC IN ETH MODEM HDMI IN (DVI/ARC) Data Cable DATA HP-ID ✎✎ Availability depends on the specific model. yy Connect the DATA jack on the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable. ✎✎ Use data communication. yy IR signals sent by the remote control to the TV or SBB / STB must meet the following specification to use IR pass through function.
List of Vendors and Compatible Data Cables Supplied with the TV yy Confirm that you are using the correct data cable for your vendor. Refer to the code label on the data cable.
Connecting the Bathroom Speakers You can connect the Bathroom Speakers using the following method. (Depending on the region) Connect through the Variable Output (external amplifier not required) TV Rear Panel VIDEO 1 Speaker VARIABLE AUDIO OUT AUDIO Volume Control Box VOL-CTRL 2 VOL+ VOL- 1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. Speaker + Speaker - N/C 2.
HP-ID An additional Headphone Box can be installed on a bed or business desk for added convenience. To do this, follow the procedure described below. yy Detailed Drawing of the Headphone Box.
Connecting the MediaHub HD Output to any external source connected to MediaHub HD on the hotel desk. MediaHub HD Rear HDMI USB RS/232 TV Rear Panel (5V 0.5A)/CLONING RJP 1 RS-232 Data Cable PC / DVI AUDIO IN AV IN VIDEO AUDIO PC IN HDMI IN (DVI/ARC) ANT IN DATA HP-ID 2 HDMI cable ✎✎ Availability will depend on the specific model. 1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD. 2. Connect the HDMI IN port of the TV and the HDMI port of the MediaHub HD.
Connecting the RJP (Remote Jack Pack) Output to any external source connected to RJP on the hotel desk. 1 D-sub / PC Audio cable RJP Rear USB HDMI VIDEO AUDIO AUDIO/PC RS/232 TV Rear Panel (5V 0.5A)/CLONING RJP PC / DVI AUDIO IN AV IN VIDEO AUDIO PC IN HDMI IN (DVI/ARC) ANT IN DATA 4 HDMI cable HP-ID 3 Video Cable 2 Audio Cable 5 ✎✎ Availability depends on the specific model. 1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP. 2.
yy The RJP can be restored to its factory default settings by pressing the A/V and HDMI buttons simultaneously and holding them for 10 seconds. When all LEDs blink 5 times, the factory restore is complete. yy The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons, and the 5-minute timer will restart.
Setting the Hotel Option Data To enter: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in that order. (From Hospitality mode, Standalone mode is set.) To exit from this menu: power off and turn on again.
No Hotel TV Function Category Item Description ON This Feature enables you to view/browse all antenna-type (Air/Cable or Satellite) channels at the same time. yy ON: When ON, guests can access the complete Channel Map regardless of the selected antenna type. The Channel list will also populate Air as well Cable type channels. yy OFF: When OFF, guest can access the Channel Map corresponding to the selected antenna type [Air/Cable or Satellite] only.
No 5 6 7 44 Hotel TV Function Category Initial value Picture Menu Lock OFF Enable or disable the Picture Menu. Menu Display ON yy ON: Main Menu is displayed. yy OFF: Main Menu is not displayed. Tools Display ON yy ON: Tools Menu is displayed. yy OFF: Tools Menu is not displayed. Channel Menu Display OFF yy ON: Channel Menu is displayed. yy OFF: Channel Menu is not displayed. Menu OSD Clock Turns the front panel (local key) operations on/off. yy Unlock: Unlocks all panel keys.
No 8 9 10 11 12 Hotel TV Function Category Remote Jack Pack External Source HP Management Bathroom Speaker (Depending on the region) Eco Solution Description Item Initial value Priority AV 1 If the jack priority is set, the corresponding source is set automatically when a jack is inserted, based on jack priority. Priority PC 2 If the jack priority is set, the corresponding source is set automatically when a jack is inserted, based on jack priority.
No Hotel TV Function Category Item Initial value Welcome Message OFF Edit Welcome Message Hospitality Logo 13 14 15 16 46 OFF English Turns the Hospitality logo feature On or Off. If On, when the TV is turned on, the Logo is displayed, before the signal from the initial source, for the amount of time set in "Logo Display Time". Hospitality Logo DL … Downloads the Hospitality logo. Hospitality logo file requirements: yy BMP or AVI files only. yy Max file size: BMP - 960 X 540. AVI - 30MB.
No 17 Hotel TV Function Category System Item Description Initial value Self Diagnosis for TV … Enter the Self Diagnosis Menu. yy Picture Test: Use this to check for picture problems. If a problem appears in the test picture, select Yes and follow the directions on the screen. yy Sound Test: Use the built-in test sound to check for sound problems. If a problem occurs during the test, select Yes and follow the directions on the screen.
HP Mode Main Speaker Mute ON/OFF ON ON OFF ON ON OFF ON ON ON ON ON ON ON ON OFF Greyed OFF OFF Greyed OFF OFF Greyed OFF ON Greyed OFF ON Greyed OFF OFF OFF ON OFF OFF ON OFF OFF ON ON OFF ON ON OFF ON OFF 48 English TV Action Output Main Speaker Sound - YES (Last Saved/User defined vol.
Welcome Message The Welcome message feature allows you to display a customized message on the TV every time the TV is turned on by a guest in a hotel room. −− Welcome message settings are located in the Hotel Option Menu. −− Welcome message should be ON for the message to be displayed when the power is turned on.
Hotel Logo The Hospitality Logo function displays the Hotel’s logo when the TV is powered on. −− The Hospitality Logo settings are in the Hospitality mode menus. −− The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. −− If there is a logo image stored in the memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on.
Cloning USB Cloning is a function that allows you to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload the same settings to other TV sets. All user-defined settings from the TV (Master Set) can be copied to the USB device. ( (ARC) ) (5V 0.5A) / CLONING −− USB Cloning support 2.0 Standard only. yy Clone TV to USB: This is an operation that copies the stored data from a specific area of the TV EEPROM to the USB device. 1.
Hospitality Plug & Play Hotel Plug & Play automatically performs Hotel mode selection, Local Set and Picture mode Setup. −− Hotel Plug & Play is available only one time, when the power is first turned on. −− This is available after first setting up the TV and transferring Clone TV data to a USB drive. −− To use Next TV, you only need to exit Hotel Plug & Play, connect the USB, then Clone the USB to TV. −− Depending on the model and region, some menus may not be included.
1. Region Settings −− Check the Region settings. −− If you want to change a setting, select it and press ENTER. −− If you don’t want to change any settings, go to the next step. 2. TV Installation Type −− If you select “Cloning Mode”, “Select Solution” appears. −− Select “TV Basic Setup” or “Commercial TV Mode” to go to the next step. 3. Menu Language −− Select the OSD (On Screen Display) language. 4. Select the Country and Picture Mode −− Select the appropriate country and picture mode.
HD Plug & Play – Local Set (Only Europe) yy Local Set is a very important software setting value that encompasses aspects such as Languages, Broadcast frequencies, etc. yy If Local Set is not configured correctly, the TV might not function. Select the correct Local Set, referring to the country list provided. TV will reboot automatically to apply the new Local Set. Region Settings Region Settings Change the region settings if you are located in North America, Latin America, or Europe.
SW Clock The SW Clock shows the current time on the screen when a user presses the Info remote control key while in standby mode. −− If a user presses the Info key when the TV is in standby mode, the TV is turned on and shows the current time on the screen for 10 seconds, then returns to standby mode. −− The time is displayed as a digital clock at the normal banner size. 12 or 24 hour time format is determined based on the format of the Information.
Multi Code Remocon The Multi Code Remote Control is a special transmitter that can control multiple TVs with one remote. This function is useful in environments where there is more than one TV in one location, such as hospitals. The Set ID number will be displayed in the source OSD. It is possible to support up to 9 different remote key transmissions for multi code. The initial ID code for each TV is “0”. The ID code can be set and reset in Analog TV mode or PC mode.
Channel Bank Editor (Smoovie TV Only) Channel Bank Editor can be used to edit channels, with 3 different Bank Options. Depending on the Bank card, there are specific channels that hotel customers can enjoy. Setting the Channel Bank Editor in Stand-alone Mode 1. Enter the Hotel Standalone menu by pressing “MUTE → 1 → 1 → 9 → Enter” 2. Please select the SI vendor: “Smoovie” 3. You will be able to see a new menu option “Channel Bank Editor” 4. Enter “Channel Bank Editor”.
Channel Editor Channel Editor edits channel number and name. −− Use Channel Editor to sort the channels into user-desired channel numbers.
My Channel Determines the country and genre for the channels provided by the hotel. If the user selects a country and genre, it shows the corresponding channels. yy You must select the country first, or you cannot set a genre. yy If you select a genre that has no associated channels, the Channel list displays all of the available channels. yy My Channel works in Standalone mode only. yy SI Vendor in Standalone mode: This does not work if Smoovie is selected.
✎✎ Notes yy This section describes the layout of the Front UI that appears when the TV is turned on. (Factory Mode > Genre Mode: Enable) yy The genre is a sub-list for each country. yy The broadcast screen that was being displayed the last memorial channel. −− To keep the previous country & genre channel map, press the ‘BLUE’, RETURN, and EXIT keys on the remote control successively to close the Front UI. ✎✎ Misc.
Highlight Interaction [Country Items] yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual screen. ✎✎ Notes yy Users can navigate the items in each country & genre list by pressing the up or down remote control keys. yy Circular navigation is supported.
Highlight Interaction [Default Genre] yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual screen.
Mode Change Interaction 1 (1/2) yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual screen.
Mode Change Interaction 1 (2/2) yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual screen. 1 5 6 My Channel My Channel Current status All Country / All Current status All Country / All Country Genre All Country All Austria News Belgium Radio China Entertainment Denmark Sports Finland Hotel Country OK Cancel } Keep Previous n Move E Enter yy The genre mode change complete message is displayed. yy Timeout(5 sec.
Mode Change Interaction 2 (1/2) yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual screen.
Mode Change Interaction 2 (2/2) yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual screen. 1 POWER Genre Mode changed to Austria / News. Power Off yy Current Genre Mode: Austria / News POWER Genre Mode changed to Austria / News.
Genre Editor yy Country and Genre selection can be done in the channel list Menu. yy Pressing the Red Key enables the country sub list. Here, the viewer can scroll down and select the country of his or her choice. yy Genre selection can be done using Left/right key, i.e by scrolling horizontally in the channel list menu. yy If viewer wants to change Genre or country in TV On state, it can be done using this feature.
Mixed Channel Map The Mixed Channel Map function mixes Air, Cable and Satellite channels. −− The Mixed Channel Map function should be ON in order to mix Air, Cable and Satellite channels. −− Use the Channel Editor to sort the channels after turning on the ‘Mixed Channel Map’ function in the Hotel Option Menu. Sound Bar yy Samsung Sound-Bar & Hospitality TV −− Use Samsung Sound-Bar & hospitality TV’s support for HDMI 1.4 to listen to TV sound on the Sound-Bar using a single HDMI cable.
Installing the Wall Mount The wall mount kit (sold separately) allows you to mount the TV to the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own.
Before installing any other wall mounting kit, assemble the wall mount adapter provided separately with the TV. Wall Mount Kit Specifications (VESA) ✎✎ The Wall mount kit is not supplied with the TV, but is sold separately. Install your wall mount on a solid wall, perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal injury.
Securing the TV to the Wall [ Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided in the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To avoid the TV falling 1.
Specifications Items Specification TV System 24-32 inch: 5W X 2 Speaker out Variable Audio 4W mono 8 ohm SPK' PC D-sub, Audio-L/R A/V Audio Video Jack EXT(RGB) DATA Compatible with HDMI Specifications Antenna 75 ohm Unbalanced, Din Jack, F Jack DATA RJ-12 RJP RS232 Operating temperature Phone Jack output BTL Sound output Scart Jack HDMI Stand Swivel (Left / Right) 20˚ / 60˚ / 90˚ Support the swivel models : HG**EE670 HG32EE470 HG40EE470 HG48EE470 HG32AE570SW/K HG40AE570SW/K HG43AE57
Supported Video Formats File Extension Container *.avi / *.mkv *.asf / *.wmv *.mp4 / *.3gp *.vro / *.mpg *.mpeg / *.ts *.tp / *.trp *.mov / *.flv *.vob / *.svi *.divx AVI MKV ASF MP4 3GP MOV FLV VRO VOB PS TS *.webm WebM Video Codec Resolution Frame rate(fps) Bit rate(Mbps) DivX 3.11/4.x/5.x/6.x MPEG4 SP/ASP 1920 x 1080 30 640 x 480 8 H.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country SINGAPORE AUSTRALIA NEW ZEALAND Customer Care Centre 1800 7267864 | 1800-SAMSUNG 1300 362 603 0800 726 786 Web Site www.samsung.com/sg/support www.samsung.com/au/support www.samsung.com/nz/support VIETNAM 1800 588 889 www.samsung.