Installation manual

24
English
No Item
Sub item
initial value
Description
Standalone Interactive
16
REACH
Server
REACH Server
update Time
OFF / 1hour /
2hour / 12:00
am / 2:00 am /
12:00 pm / 2:00
pm
1hour n/a
Select SIRCH update Time.
In SIRCH update time , we have the option to
do automatic upgrade at 12:00 AM/PM or at
2:00 AM/PM. We can do hourly upgrade at an
interval of either 1 hr or 2 hr
REACH Update
Immediate
On/Off Off n/a
•On:WheneverTVgoestoStand-Bymode,
always works SIRCH Update
•Off:OnlyworksSIRCHUpdateonselected
SIRCH Update Time
REACH Server
Channel
*** 87 n/a
Select SIRCH Update Channel
REACH Server
Version
*** 0000 n/a
Display the version of SIRCH Clone file
currently updated in TV.
REACH Server
Group ID
All, 1 - 511 ALL n/a
Select SIRCH Group ID
S-LYNK
REACH
On/Off Off n/a
Enable or Disable REACH Display
S-LYNK
REACH Volume
On/Off On n/a
•On:TheTVsoundinthecurrentTVsource
is continouly outputted even though the
S-LYNK REACH menu is displayed.
•Off:TheTVsoundinthecurrentTVsource
is stopped when the S-LYNK REACH
menu is displayed.
TICKER On/Off Off n/a
•On:TheTICKERcontentsisdisplayed.
•Off:TheTICKERcontentsisnotdisplayed.
17 Service
Self Diagnosis
for TV
*** - -
Enter Self Diagnosis Menu.
•PictureTest:Usetocheckforpicture
problems. If the problem appears in the test
picture, select Yes and follow the directions on
the screen.
•SoundTest:Usethebuilt-inmelodysound
to check for sound problems. If the problem
occurs during the test, select Yes and follow
the directions on the screen.
Self Diagnosis
for HTV
*** - -
This can let you check the state of Variable
audio out and communication with the SI
STB or SBB. If you meet any problem in the
variable audio out feature or communication
with SI STB or SBB, please check this items.
Upgrade Now ***
Upgrade the TV SW.
Service Pattern *** - -
Display Service pattern.
TV Reset
*** - -
Reset the TV
✎ REACH(Remote Enhanced Active Control for Hospitality) is a professional and interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel maping changes, S-LYNK REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are avalible only in stand-
alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed in the REACH server
product for the more information of operating.
[HB670-XC]Install Guide-ENG.indd 24 2013-02-04 �� 3:11:07