670/673/675 LED TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model [HB670-XC]Install Guide-ENG.indd 1 Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and specifications may be changed without notice. Instruction This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled system for hotels and other hospitality businesses. Interactive : When the TV is powered-up initially, it sends a command to identify the SBB/STB.
Contents ENGLISH yy Accessories............................................................................................................................................................... 4 yy Installing the LED TV Stand........................................................................................................................................ 4 yy Assembling the swivel (32 inch TVs or larger).....................................................................................................
Accessories ✎✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎✎The items’ colours and shapes may vary depending on the model.
HG32EB670, HG32EB675, HG39EB670, HG39EB675, HG42EB675, HG46EB670, HG46EB675 1 C x4 (M4 X L12) 2 B A-1 Front ATTENTION ✎✎ DO NOT USE DO NOT USE DO NOT USE CHEMICALS GREASE OIL Side 3 ✎✎ Place a soft cloth over a table to protect the TV, and then place the TV on the cloth screen side down. Insert the Stand Guide into the slot on the bottom of the TV.
HG28EB670, HG28EB675 ✎✎ 1 ✎✎ Place a soft cloth over a table to protect the TV, and then place the TV on the cloth screen side down. Insert the Stand Guide into the slot on the bottom of the TV. 2 C x3 (M4 X L12) A-3 ✎✎When installing the stand, you should add a rotary valve (round metal) which have a swivel function and fix it using two screws on the stand bracket. When you want to use the swivel function, you should fix the stand as the instruction.
Viewing the Connection Panel Power Input $ @ # COMPONENT / AV IN ! HDMI IN 1 ! DATA COMPONENT / AV IN ! 2 3 HOSPITALITY TV HDMI IN 2 (DVI) HDMI IN 3 (ARC) HDMI IN 1 0 USB (5V 0.5A) / CLONING % PC IN PC IN 0 HDMI IN 2 (DVI) VIDEO VIDEO CLOCK 1 USB (5V 0.5A) / CLONING 9 DIGITAL AUDIO OUT PC / DVI (OPTICAL) AUDIO IN DATA HDMI IN 3 (ARC) DIGITAL AUDIO OUT PC / DVI (OPTICAL) AUDIO IN HOSPITALITY TV ! $ # 1 HDMI IN 2 (DVI) ! HDMI IN 1 ! USB (5V 0.
7 EXT (RGB) Input Connector Output Video Audio (L/R) RGB Video + Audio (L/R) 0 0 0 Only TV or DTV output is available EXT ✎✎Inputs or outputs for external devices, such as a video game device or VCR, DVD or video disc player. 8 RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional modules to improve the convenience of using devices.
✎✎Optimal resolution is 1920 X 1080 @ 60 Hz.
Using the TV's Controller The TV Controller, which is a small joystick like button at the right back of the TV, lets you control the TV without the remote control. Selecting Media Play Selecting the Menu Selecting a Source Function menu Return Remote control sensor TV Controller The image is drawn by facing the front side of the TV. Power off ✎✎The product colour and shape may vary depending on the model. ✎✎Exits the menu when pressing the controller for longer than 1 second.
Viewing the Remote Control ✎✎This is a special remote control for visually impaired persons and has Braille points on the Power, Channel and Volume buttons. Display and select available video sources. Turns the TV on and off. Directly select channels Alternately selects Teletext, Double or Mix. GUIDE Display the Electronic Programmeme Guide (EPG) Cut off the sound temporarily. Adjust the volume. Change channels. Display the channel list on the screen. Switch to the HOME screen.
Connecting the TV with an SBB TV Rear Panel ETH MODEM Data Cable HOSPITALITY TV DATA COMPONENT / AV IN HDMI IN 3 (ARC) CLOCK Hotel Server STB (Set Top Box) or SBB (Set Back Box) 1. Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable. ✎✎ Use data communication. 12 English [HB670-XC]Install Guide-ENG.
¦¦ List of Vendors and Compatible Data Cables Supplied with the TV yy Confirm you are using the correct data cable for your vendor. Refer to the code label on the data cables. English [HB670-XC]Install Guide-ENG.
Connecting the Bathroom Speakers You can connect the Bathroom Speakers in the following way. ¦¦ Connecting through the Variable Output (available without an external amplifier) TV Rear Panel 1 AUDIO VARIABLE AUDIO OUT VOL-CTRL Speaker 2 VOL+ VOL- Volume Control Box 1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. Speaker + Speaker - N/C 2. Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
¦¦ HP-ID An additionally created Headphone Box can be installed on a bed or business desk so that users can use it conveniently. The installation procedures are described below. yy Detailed Drawing of the Headphone Box. TV Rear Panel HEADPHON BOX EXT HP-ID Headphone Box Shield wire Red Wire (Audio-R) Red wire + White wire TV Headphones jack White wire (Audio-L) Shield Wire TV HP-ID jack English [HB670-XC]Install Guide-ENG.
Connecting the MediaHub HD Any external source connected to the MediaHub HD can be output to the hotel desk. ✎✎The colour and shape may vary depending on the model. TV Rear Panel MediaHub HD Rear HDMI DATA COMPONENT / AV IN HDMI IN 3 (ARC) VIDEO CLOCK DIGITAL AUDIO OUT PC / DVI (OPTICAL) AUDIO IN HOSPITALITY TV PC IN AUDIO RJP VARIABLE AUDIO OUT VOL-CTRL HP-ID USB RS/232 HDMI IN 2 (DVI) HDMI IN 1 2 HDMI cable USB (5V 0.5A) / CLONING ANT IN AIR/CABLE 1 RS-232 Data Cable 1.
Connecting the RJP (Remote Jack Pack) Any external source connected to the RJP can be output to the hotel desk. ✎✎The colour and shape may vary depending on the model. 3 Video Cable TV Rear Panel USB HDMI VIDEO AUDIO AUDIO/PC RS/232 RJP Rear DATA COMPONENT / AV IN HDMI IN 3 (ARC) CLOCK VIDEO 4 HDMI cable DIGITAL AUDIO OUT PC / DVI (OPTICAL) AUDIO IN HOSPITALITY TV PC IN AUDIO RJP VARIABLE AUDIO OUT VOL-CTRL HP-ID HDMI IN 2 (DVI) 4 HDMI cable HDMI IN 1 USB (5V 0.
yy The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10 seconds. All LEDs blink 5 times to acknowledge that the reset has been performed. yy The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart.
Setting the Hotel Option Data To Enter: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in this order. (Standalone mode is set in Hospitality mode.) To Exit from this menu : power off and turn on again. No Item Sub item Initial Value Standalone Interactive Description Standalone / Interactive 1 Hospitality Mode 2 SI Vendor Power On Channel EN Power On Channel 3 Power On Standalone Default : Standalone *** User Defined / Last Saved OFF Last Saved Select Hospitality mode.
No Item Sub item Initial Value Standalone Interactive Channel Setup *** Channel Editor *** Channel Bank Editor *** (Remark) n/a Mixed Channel Map On / Off (Remark) n/a Dynamic SI On / Off ON n/a Channel Rescan Message On / Off OFF OFF Pan Euro MHEG On / Off ON ON My channel En On / Off OFF n/a Genre Editor *** - n/a Users can set channel options such as Auto Tuning, Manual Tuning, Antenna setting, etc. Provided option for editing Channel Name and Number and video.
No Item Sub item Initial Value Standalone Interactive Panel Button Lock Unlock / Lock / OnlyPower / Menu/Source Unlock Unlock Subtitle Auto On On / Off Off Off Clock Type Off/SW Clock/ Ext. Clock Off Off Local time Standalone : Manual / TTX Interactive : Manual / TTX / Auto Manual Auto 12 Hour / 24 Hour 24 Hour 24 Hour Failure / Success Failure Failure Clock Normal Dim. 0~4 4 4 Clock Standby Dim.
No Item 10 External Device Sub item Interactive 1 USB Media Mode External Source Banner On / Off Off Off Default / Automatic / Disable Default Default On / Off ON ON On / PC / Off OFF OFF Power On Src / Last Source / Each model source list (AV1, COMP, PC, HDMI1…) Power On Src Power On Src External Source Auto source Anynet+Return Source 22 Description 7610 Priority AV 1~3 This option defines the priorities in which 7610 Priority 1~3 2 2 the External sources (AV/PC/HDMI) will be PC
No Item Bathroom 12 Speaker 13 Eco Solution Sub item Logo/ Message Interactive Description The Bathroom speaker can be operated in three different ways by setting Sub Amp Mode in the standalone menu. • 0 : Mode 0 disables the bathroom speaker. • 1 : In mode 1, the Bathroom speaker follows the TV Main speaker. The Bathroom speaker sound is controlled from the Samsung RCU and the volume keys on the TV panel.
No Item 16 REACH Server 17 Service Sub item Initial Value Standalone Interactive Description Select the SIRCH update Time. In the SIRCH update time , you have the option to perform an automatic upgrade at 12:00 AM/PM or at 2:00 AM/PM. You can perform hourly upgrades at an interval of either 1 hr or 2 hrs.
¦¦ Welcome Message The Welcome message is a feature that allows you to display ccustomized message on the TV every time the TV is turned on by a guest in a hotel room. –– The Welcome message settings are placed in the Hotel Option Menu. –– The Welcome message should be ON in order for the message to be displayed when the power is turned on.
¦¦ Hospitality Logo The Hospitality Logo function displays the Hotel's logo when the TV is powered on. –– The Hospitality Logo settings are in the Hospitality mode menus. –– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. –– If there is a logo image stored in the memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on.
¦¦ Cloning USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload the same settings to other TV sets. All user-defined settings from the TV (Master Set) can be copied to the USB device. yy Clone TV to USB: This is an operation that copies the stored data from a specific area of the TV EEPROM to the USB device. 1. Insert a USB drive into the USB port on the back of the TV. 2.
¦¦ Plug & Play The Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup when the TV starts for the first time. –– Hotel Plug & Play is only available when the power is turned ON for the first time. –– After setting up the TV first and running Clone TV to USB. –– Next, the TV only needs to exit Hotel Plug & Play, connect to the USB device, then run Clone USB to TV.
1. LocalSet –– Check the Current Localset. –– If you want to change the localset, select the Change. –– If you select the Skip, the Start screen appears. 2. Start - Easy Set Up –– If you select the Standalone Only, the Standalone hotel mode is set by default. –– When you select the Interactive, Interactive Setup Menu is displayed. Press the power off button to exit from the Interactive menu. –– Select the Standalone Plug & Play to go next step. 3.
¦¦ HD Plug & Play – Local Set yy Local Set is very important software setting value such as Languages, Broadcast frequencies, etc. yy TV might not function, if Local Set is not correctly configured. Select correct Local Set with country list provided. Local Set change option on the first page of HD plug&play Select right Local Set with country list TV will reboot automatically to apply new Local Set Local Set Local Set Local Set Change Locat Set if Located in North America, Latin America and Europe.
¦¦ SW Clock The SW Clock shows the current time on the screen when a user presses the Info remote control key in standby mode. –– If a user presses the Info key when the TV is in standby mode, the TV is turned on and shows the current time on the screen for 10 seconds and then returns to standby mode. –– The time is displayed as a digital clock at the normal banner size. The 12 or 24 hour time format is determined according to the format of the Information.
¦¦ Multi Code Remote Control Multi Code Remote Control is a special transmitter which is designed to control multiple TVs with one remote. This function is useful when there is more than one TV in one location such as a hospital. The Set ID number will be displayed in the source OSD. It is possible to support up to 9 different remote key transmission for multi code. The initial ID code of each TV is “0”. The ID code can be set and reset in Analog TV mode or PC mode.
¦¦ Channel Bank Editor (Smoovie TV Only) Channel Bank Editor is a function to edit channels with 3 different Bank Options. Depending on the Bank card, there are specific channels hotel customers can enjoy. Setting the Channel Bank Editor in Stand-alone Mode 1. Enter the Hotel Standalone menu by pressing “MUTE+1+1+9+Enter” 2. Please select the SI vendor : “Smoovie” 3. You will be able to see the new menu option “Channel Bank Editor” 4.
¦¦ Channel Editor The Channel Editor function allows you to edit the channel number and name. –– Use the Channel Editor to sort the channels.
¦¦ My Channel Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows the corresponding channels. yy You must select the country first, or you cannot set a genre. yy If you select the genre that not added any channels, the Channel list displays all channels. yy My Channel works in Standalone mode only. yy SI Vendor in Standalone mode: This does not work if Smoovie is selected.
✎✎Notes xx This section describes the layout of the Front UI that appears when the TV is turned on. (Factory Mode > Genre Mode: Enable). xx The genre is a sub-list of each country. xx The broadcast screen that was being displayed the last memorial channel. –– If a user wants to keep the previous country & genre channel map, press ‘BLUE’, RETURN, and the EXIT remotecontrol key to close the Front UI. ✎✎Etc.
Highlight Interaction [Country Items] • This page is only for interaction. Each screen may not be exactly identical to the actual one. ✎✎Notes xx Users can navigate the list items in each country & genre list by pressing the up or down remote control keys. xx Circular navigation is supported.
Highlight Interaction [Default Genre] • This page is only for interaction. Each screen may not be exactly identical to the actual one.
Mode Change Interaction 1 (1/2) • This page is only for interaction. Each screen may not be exactly identical to the actual one.
Mode Change Interaction 1 (2/2) • This page is only for interaction. Each screen may not be exactly identical to the actual one. 5 1 6 My Channel Current status : All Country/Sports Country 1 Genre ▲ ENTER Info Genre Mode change to Austria/News. OK All Country All Austria News Belgium Entertainment China Hotel Denmark Finland France ▼ Navigation Help Area yy The genre mode change complete message is displayed. yy Timeout(5 sec.
Mode Change Interaction 2 (1/2) • This page is only for interaction. Each screen may not be exactly identical to the actual one.
Power On Scenario [Last Memory] • This page is only for interaction. Each screen may not be exactly identical to the actual one. 1 Current Status : Austria / News POWER Power Off yy Current Genre Mode : Austria / News POWER My Channel Current status : All Country/Sports Country Genre ▲ All Country All Austria News Belgium Entertainment China Hotel Denmark Finland France ▼ Navigation Help Area yy Current Genre Mode : Austria / News 42 English [HB670-XC]Install Guide-ENG.
Genre Editor (This configures the genres of each of the hotel TV channels.) yy This can be used through the Hotel Menu (Factory). yy Supported genres include News, Radio, Entertainment, Sports and Hotel. yy More than one genre can be selected for each channel at the same time. yy Country Editor (Channel Editor): This is the editor that configures the country for each of the hotel TV channels.
Elements No Name Description yy When the user enters this screen, the currently selected default item is highlighted. yy The Country Icon + Category Name are provided. (If the highlight is in the Main Frame, only the icon is displayed.) yy Moving the highlight –– Pressing the up or down button moves the highlight. –– If the items cannot be displayed on one page, up and down indicators are provided.
✎✎Notes xx This is a definition of the Tools menu in the Left Frame Category. xx Only the Info item for each Register/Country is provided. Elements Category Tools menu Descriptions Registered, Country Information Registered Channels. The number of channels of each country. • The items are displayed without ‘Channel’. Error Cases ✎✎Notes xx This is the message when there are no saved channels in the Registered Channels list.
✎✎Notes xx This is the component for when there are no channels registered to the country category. Elements No Description Description yy The message is displayed when the currently selected country does not contain any items. Main Frame [Channel Browser] 46 English [HB670-XC]Install Guide-ENG.
Key Guide Button Action Nav. Help < CH > Moves the page. Page ENTER Selects or enters the corresponding Channel Browser area. Select RETURN Returns to the previous step (Factory Mode). Return ▲/▼ Moves the highlight up or down. (No Guide) ► Moves the highlight to the Channel Browser area. (No Guide) INFO Shows the Category Info. (No Guide) TOOLS Shows the utility function menus. Tools EXIT Cancels and returns to the previous step (Factory Mode).
Add to Countries / Edit Countries (1/2) Key Guide Button Action Nav. Help ENTER Selects the highlighted item. Enter RETURN Cancels and returns to the previous screen (Tools). Return ▲/▼ Moves the highlight over country items. Move ◄/► Moves the highlight. Move INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode). (No Guide) ✎✎Note. xx This is the definition of Add to Countries.
Elements No Name Description 1 Add to Countries Window • If there are no channels that have been registered to the country list in the selected channels, “Add to Countries” is displayed as the title. • A check box is displayed depending on whether the country that was selected when entering the screen is registered or not. 2 Guide 3 Selection Info 4 Complete Message 5 Selection Mark • The number of the selected channel or the channel name.
✎✎Notes xx This is the definition for Edit Countries. xx The highlighted channel item or more than one selected channel item is added or deleted from the Country category. ✎✎Etc. xx Timeout (60 sec) Elements No Name Description 1 Add to Countries 2 Guide 3 Complete Message yy If there is a registered channel among the selected channels, Edit Countries is displayed as the title. yy A check box is displayed depending on whether the selected country is registered or not.
✎✎Etc. xx Vertical circulation is supported. Elements No 1 2 Name Description Edit Channel Number Window yy Both the numeric keys and the Up/Down keys are supported. –– Selected Channel: Shows the currently selected channel name. –– Number: Shows the new channel number. (The currently allocated channel name is also displayed.) –– Name: Shows the currently allocated channel name. (If there are no channels, it is displayed as “(Empty)”.
Key Guide Button Action Nav. Help RED If a user presses the button, the channel number is initialized. Reset ENTER Applies the changes and closes the window. Enter RETURN Cancels or returns to the previous screen (Tools). Return ▲/▼ Changes the channel number of the selected channel. Adjust 0~9 Enters a digit. Number INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode).
Edit Channel Name • Channel Manager > Browser > Tools > Edit Channel Name Key Guide Button Action Nav. Help GREEN Saves the changes and returns to the Channel Manager. Done ENTER Saves the channel name and moves the cursor to the next field. Enter RETURN Cancels and returns to the previous screen (Tools). Return ▲/▼/◄/► Navigates via the keyboard. Move 0~9 Enters a digit. (No Guide) INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu.
Tools [Edit Mode] Edit Mode Content Highlight (when the number of the checked item is 0 or 1) Add to Countries Edit Countries (when an already-registered item is checked.) Channel Name Edit Edit Channel Number Video Mute Channel Copy (Astra HD +) Reorder (Satellite) Select All Deselect All (this is only displayed when 1 or more items are selected) Delete When there is more than one checked item. Add to Countries Edit Countries (when an already-registered item is checked.
CH Banner [when a channel number is allocated to an external input] ✎✎Notes xx The TV channel banner specifications are applied. xx When there is an unsupported item or there is no corresponding information, the item values are not displayed. xx The channel name is represented as the ‘external input name’. Elements No Name 1 External Input Name Description The Channel List provides some functions of the GenreTV. yy Country Mode yy Changes the genre mode.
yy Features of "Hotel MODE" in the Sound-BAR –– –– –– –– –– Synchronized power on/off with the TV. HDMI_CEC enabled. Accessible “HDMI OUT” port only. (Other inputs are disabled) Synchronized “power-on”&“max” volume with the TV. (The Sound-Bar’s volume is set to half that of the TV) Adjustable “power-on”&“max” volume acquired from the TV’s hotel option menu. (Sound-Bar volume=TV volume/2) Ex.
Securing the TV to the Wall Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To avoid the TV from falling 1.
Specifications Items TV System Speaker out Data Comment 28inch : 5W x 2 32inch / 39inch / 42inch / 46inch : 10W x 2 Audio out Input Specifications PAL, SECAM, DVB-TC, DVB-T2CS2 Variable Audio 4W mono 8 ohm SPK' Digital audio out Optical Component Y, Pb, Pr, Audio-L/R PC D-sub, Audio-L/R A/V Audio Video Jack EXT Scart Jack HDMI Compatible with the HDMI Specifications Antenna 75 ohm Unbalanced, Din Jack , F Jack DATA RJ-12 RJP RS232 Operating temperature 10°C ~ 40°C (50°F ~ 104°F)
Supported Video Formats File Extention Container Video Codec DivX 3.11/4.x/5.x/6.x *.avi / *.mkv *.asf / *.wmv *.mp4 / *.3gp *.vro / *.mpg *.mpeg / *.ts *.tp / *.trp *.mov / *.flv *.vob / *.svi *.divx AVI MKV ASF MP4 3GP MOV FLV VRO VOB PS TS *.webm Resolution Frame rate (fps) Bit rate (Mbps) 1920 x 1080 MPEG4 SP/ASP Audio Codec AC3 LPCM ADPCM (IMA, MS) AAC HE-AAC WMA DD+ MPEG (MP3) DTS (Core) G.711(A-Law, μ-Law) 30 H.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site ALBANIA 42 27 5755 www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) BELGIUM 02-201-24-18 www.samsung.com www.samsung.com/be (Dutch) BOSNIA 05 133 1999 www.samsung.com/be_fr (French) www.samsung.com BULGARIA 07001 33 11 www.samsung.com CROATIA www.samsung.com www.samsung.