LED TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model [HG470570_HOTEL-ZA]ENG.indd 1 Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Introduction This TV has functionality that lets it interact with a set-back box (SBB/STB) and with other TVs in a computer controlled system for hotels and other hospitality businesses. Interactive : When the TV is powered-up initially, it sends a command to identify the connected SBB/STB.
Contents Introduction............................................................................................................................................................... 2 Operational Modes.................................................................................................................................................... 2 Still image warning..............................................................................................................................................
Accessories ✎✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎✎The items’ color and shape may vary, depending on the model. ✎✎The parts for the stand are listed under Stand Components on the following page.
Installing the LED TV Stand The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right. 60 degrees left and right, or 90 degrees left and right. See page 7. The 26” LED TVs do not have swivel stands. Components When installing the stand, use the provided components and parts.
¦¦ Hotel Mount Kit Bolt + Nut Long Bolt (2EA) Short Bolt (2EA) Nut (2EA) Washer (2EA) Top Bottom Affixing the stand to a flat surface such as a dresser top, desk top, or entertainment center. ✎✎Make sure to distinguish between the front and back of the Stand and Stand Guide when assembling them. ✎✎Make sure that at least two people lift and move the TV. 6 English [HG470570_HOTEL-ZA]ENG.
Assembling the swivel (32 inch TVs or larger) ¦¦ 60° swivel Leaving the BRACKET HOLDER SWIVEL unchanged lets the TV swivel 20° left and right. Rotating the BRACKET HOLDER SWIVEL 180°, and then assembling the stand as shown below lets the TV swivel 60° left and right. ¦¦ 90° swivel Removing the BRACKET HOLDER SWIVEL and assembling the stand as shown below without the BRACKET HOLDER SWIVEL lets the TV swivel 90° left and right. English [HG470570_HOTEL-ZA]ENG.
Using the TV's Controller ✎✎The color and shape of the TV Controller may vary depending on the model. ✎✎The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control. Function menu CONTENT Down (Front) Remote control sensor Left Right TV Controller Up (Rear) Power on Turn the TV on by pressing the Controller when the TV is in standby mode.
The Connection Panel 9 [46" Model] 1 2 3 3 3 0 0 4 5 ! 6 7 8 ✎✎Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off. ✎✎When connecting an external device, match the color of the connection terminal to the cable. 1 COMPONENT IN / AV IN1 (46" Model: COMPONENT IN / AV IN) –– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on an A/V device. –– Connects Component video / audio.
4 DIGITAL AUDIO OUT (OPTICAL): Connects to a Digital Audio component. 5 PC / DVI AUDIO IN: Connect to the audio output jack on your PC. 6 PC IN: Connect to the video output jack on your PC. 7 AUDIO OUT: Connects to the audio input jacks on an Amplifier/Home Theater.
The Remote Control ✎✎This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired customers. Display and select the available video sources. Turns the TV on and off. HDMI Selects the HDMI mode directly. Press to directly access channels. Press to select additional digital channels being broadcast by the same station. For example, to select channel ‘54-3’, press ‘54’, then press '-' and ‘3’. PRE-CH Return to the previous channel.
Connecting the TV to an SBB or STB TV Rear Panel ETH MODEM Data Cable 1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable. ✎✎ Data cables are polarized. Make sure you attach the end marked TV Side to the TV and the end marked STB Side to the STB. Also make sure you use the correct data cable for your vendor. 12 English [HG470570_HOTEL-ZA]ENG.
¦¦ List of Vendors and Compatible Data Cables Supplied with the TV yy Confirm you are using the correct data cable for your vendor. Refer to the code label on the data cables. Confirm the code on the Code Label Note the labeled end. Note the labeled end. Vendor Cable code OCC BN39-00865B NXTV BN39-01011B nStreams BN39-01110A MTI BN39-01011C Pin assign Remark Provided LodgeNet MTI Provided English [HG470570_HOTEL-ZA]ENG.
¦¦ Connecting the Audio Output to an Audio Amplifier TV Rear Panel AUDIO IN Audio Amplifier 1S tereo cable 1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable. B-LAN Model (HG478/HG578) yy The TV is controlled by the external network. yy Hotel Plug & Play is not supported in B-LAN models (HG478/578). 14 English [HG470570_HOTEL-ZA]ENG.
Connecting the RJP (Remote Jack Pack) Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV. 4 2V ideo / Audio Cable TV Rear Panel RJP Rear USB HDMI S-VIDEO RCA AUDIO/PC RS/232 3H DMI cable 1D -sub / PC Audio cable 1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP. 2. Connect the AV IN [VIDEO]/[R-AUDIO-L] port of the TV to the RCA port of the RJP. 3.
yy RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP communicates with the TV via RS232. A Hot Plug & Play function allows hotel guests to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/Inactive sources.
Setting the Hotel Option Data To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode menu and the Interactive mode menu. The menu items that differ between the menus are listed below, Items in the Standalone menu only: –– SIRCH Update Time –– Manual SIRCH –– SIRCH Channel –– SIRCH Version Items in the Interactive menu only: –– SI Vendor –– Lodgenet Remote (If you selected MTI or EBL as your SI Vendor) All other items appear in both menus.
¦¦ Menu Items To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTER buttons in order. To Exit from this menu : AC Power off, and then turn on again. Any changes you made are saved. Menu Item initial Value Hospitality Mode Hospitality Mode Standalone SI Vendor SI Vendor Samsung Power On Channel EN Last Saved Power On Channel 3 Channel Type ... Power On Volume EN Last Saved Power On Power On Volume Min Volume Max Volume ...
Menu Item Picture Menu Lock initial Value Menu Display ON Operation Panel Button Lock Unlock Clock Local Time Manual Music Mode AV OFF Music Mode PC OFF Music Mode Comp OFF Music Mode Backlight OFF 7610 Priority AV 1 7610 Priority PC 2 7610 Priority HDMI 3 Menu OSD Music Mode External Device 7610 AV Option RJP HDMI Option OFF AV1 HDMI1/DVI Description Enable or disable the Picture Menu. yy On : Main Menu displays. yy Off : Main Menu does not display.
Menu External Source Item initial Value USB Media Mode Defalut External Source Banner ON Auto Source OFF Anynet+ Return Source Power On Src Eco Solution Energy Saving Logo/ Message Welcome Message Edit Welcome Message Hospitality Logo Hospitality Logo DL Cloning 20 Logo Display Time Clone TV to USB Clone USB to TV Setting Auto Initialize Description When USB is connected to the TV, yy Default : Popup window appears. yy Automatic : Enters the USB contents menu automatically.
Menu SIRCH Item initial Value SIRCH update Time 12:00 PM SIRCH Update Immediate Manual SIRCH SIRCH Channel SIRCH Version SIRCH Group ID REACH IPG Room Type CAS PI AES DATA On Service yy On : Whenever TV goes to Stand-By mode, always works SIRCH Update yy Off : Only works SIRCH Update on selected SIRCH Update Time Upgrade SIRCH Clone / Binary by manual 87 Select SIRCH Update Channel 0000 Display the current SIRCH Clone version ALL Select SIRCH Group ID Off REACH Display On/Off Default Sele
¦¦ Welcome Message The Welcome Message feature displays a custom message on the TV every time it is turned on. –– Welcome message settings are in the Hotel Option Menu. –– Set Welcome Message to ON to display the message when the TV is powered on. Welcome Message OFF Edit Welcome Message Hospitality Logo OFF Hospitality Logo DL ... Logo Display Time ... –– You can make the Welcome Message up to 25 characters long and edit it in the Hotel Service menu.
¦¦ Hospitality Logo The Hospitality Logo function displays the Hotel's picture image when the TV is powered on. –– Hospitality Logo settings are in the Hotel mode menus. –– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. –– If there is a logo image stored in the memory and Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on.
¦¦ USB Cloning The USB Cloning function lets you download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you create a standard array of settings and distribute that standard array to all the TVs in your facility. yy Cloning from TV to USB: Copies stored menu settings from a TV to a USB device. 1. Insert a USB drive into the USB port on the rear of the TV. 2.
yy Settings Cloned in the Hotel Menu Menu Item Cloning Support Applicable Region Hospitality Mode Yes All SI Vendor Yes All except Brazil Power On Channel EN Yes All Power On Channel Yes All Channel Type Yes All Power On Volume EN Yes All Power On Volume Yes All Min Volume Yes All Max Volume Yes All Power On Source Yes All Power On Option Yes All Channel Setup N/A All except Hospital Channel Editor N/A All Channel Bank Editor N/A Smooovie SI and Hospital Channel
Menu Item Cloning Support Applicable Region RJP HDMI Option Yes All HDMI Music Mode Yes US and US Hsopital Sound Bar Out Yes All Video Out Yes ASIA Models only USB Media Mode Yes US and EU External Source Banner Yes All Auto Source Yes All Anynet+ Return Source Yes All Models except Hospital Sub Amp Mode Yes All except US Sub Amp Volume Yes All except US Pillow Speaker Type Yes Hospital Models Only Speaker Select Yes Hospital Models Only Pillow Volume Yes Hospital Mo
¦¦ Multi Code Remocon A Multi Code Remocon is a special remote which is designed to control multiple TVs. This function is useful where there is more than one TV in a location. You can control up to 10 TVs, each with a different ID code, with one remote. ID numbers are displayed on each TV's OSD. The Initial ID code for each TV is “0”. –– You can set and reset the ID code in Analog TV mode or PC mode. (Not available in DTV mode.) –– You can set the ID code to any digit from 0 to 9.
¦¦ Setting Auto Initialize When you clone settings from one TV to another, you clone both guest side menu and hotel side menu settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup). This lets you set nearly all the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example, the Picture menu, they can change the settings in those menus so they are no longer standard.
¦¦ Hotel Plug & Play Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup, and Picture mode Setup runs once, when power is first turned ON. Setup also runs automatically after you have executed a Service Reset. yy UI Scenario Fastory Reset Type Local Set Basic Model SVC Model Tuner Light Effect Ch Table Front Color If you select the Factory Reset, the TV resets all values to their factory defaults and then displays the Hotel Plug & Play menu.
yy Hotel Plug & Play OSD –– Initial Highlight: Interactive –– If you select the Standalone Only button, the Standalone hotel mode is set by default and the “Standalone mode is set” OSD appears for 3 seconds. –– TV enters into RF mode automatically after displaying “Standalone mode is set” OSD for 3 seconds. –– If you select the Interactive mode, the Interactive Setup Menu is displayed. Press the power off key to exit from the Interactive menu.
¦¦ USB SW Upgrade Method Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hotline at 1-866-894-0524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive containing the upgrade to the USB port located on the TV. When the software is upgraded, video and audio settings you have made will return to their default (factory) settings.
Installing the Wall Mount Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the TV on a wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Anti-theft Kensington Lock The Kensington Lock is a device you can use to physically fix a TV to a location when you use it in a public place. The appearance and locking method may differ from the illustration at right, depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. 1 The Kensington Lock is not supplied by Samsung. ✎✎Please find a “K” icon on the rear of the TV. A Kensington slot is beside the “K” icon.
Specifications Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Model Name 50°F to 104°F(10°C to 40°C) 10% to 80%, non-condensing -4°F to 113°F(-20°C to 45°C) 5% to 95%, non-condensing Display Resolution Screen Size (Diagonal) Sound (Output) Dimensions (WxDxH) Body With stand Weight Without Stand With Stand Stand Swivel (Left / Right) Model Name 1366 x 768 26" Class (26.0" measured diagonally) 32" Class (31.
Dimensions HG26NA470 / HG26NA477 ▪▪ Front view / Side view 7 1 2 5 3 6 7 1 2 4 8 5 3 6 (Unit: inches) 1 2 3 5 4 5 6 7 8 24.4 22.7 12.7 14.1 15.6 17.7 3.7 7.1 1 ▪▪ Jack panel detail / Rear view 6 4 2 8 4 35 1 6 2 4 3 5 1 6 4 (Unit: inches) 2 1 5.5 2 3.6 3 4 3.8 1 13.9 3 5 5 6 3.9 3.9 6 4 2 3 English [HG470570_HOTEL-ZA]ENG.
7 1 HG32NA470 / HG32NA477 / HG32NA478 2 ▪▪ Front view / Side view 5 3 7 6 1 2 5 3 4 8 6 5 1 8 46 2 1 4 2 5 3 1 29.3 27.5 3 15.5 (Unit: inches) 4 5 6 7 8 16.5 18.3 20.6 3.7 7.5 6 ▪▪ Jack panel detail / Rear view 2 4 3 5 1 6 4 2 35 1 6 36 1 2 3 7.5 3.5 4.6 2 4 19.0 3 5 7.8 (Unit: inches) 4 6 7.8 English [HG470570_HOTEL-ZA]ENG.
HG40NA570 / HG40NA577 / HG40NA578 ▪▪ Front view / Side view 5 1 3 4 6 2 (Unit: inches) 1 2 3 4 5 6 36.5 20.3 21.6 23.8 3.6 8.9 ▪▪ Jack panel detail / Rear view 36.5 7.0 9.6 14.3 7.8 21.6 14.3 7.8 5.9 0.9 6.1 6.7 5.8 6.5 6.8 5.8 5.6 11.4 1.2 41.7 11.6 24.6 5.2 [HG470570_HOTEL-ZA]ENG.indd 37 12.9 5.2 15.7 12.9 English 37 15.7 0.
HG46NA570 / HG46NA577 / HG46NA578 36.5 ▪▪ Front view / Side view 1 9.6 5 7.0 14.3 7.8 21.6 14.3 7.8 3 5.9 4 0.9 6.1 6.7 6.8 6 2 5.8 6.5 5.8 5.6 11.4 1 2 3 4 41.7 20.3 24.6 26.8 1.2 (Unit: inches) 5 6 3.7 8.9 ▪▪ Jack panel detail / Rear view 41.7 5.2 12.9 11.6 24.6 15.7 12.9 15.7 5.2 0.9 7.6 8.2 3.6 5.2 6.6 8.9 9.7 9.8 1.2 38 English [HG470570_HOTEL-ZA]ENG.
▪▪ Base Stand detail HG26NA470 / HG26NA477 (Unit: inches) 7.1 14.1 HG32NA470 / HG32NA477 / HG32NA478 (Unit: inches) 16.5 7.5 2.2 5.3 R9.5 R3.75 5.9 16.5 7.5 6.4 English [HG470570_HOTEL-ZA]ENG.
HG40NA570 / HG40NA577 / HG40NA578 / HG46NA570 / HG46NA577 / HG46NA578 (Unit: inches) 20.3 8.9 2.6 5.3 R9.5 R3.75 5.9 20.3 8.9 7.5 NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
¦¦ Important Warranty Information Regarding Television Format Viewing ✎✎ See the warranty card for more information on warranty terms. Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving.
This page is intentionally left blank. [HG470570_HOTEL-ZA]ENG.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Samsung Hospitality Hotline: 866-894-0524 Web site: http://www.samsung.com/us/business [HG470570_HOTEL-ZA]ENG.