LED TV Installation manual Thank you for purchasing Samsung product. To receive more service, please register your product at www.samsung.com Model Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Instruction This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computercontrolled system for hotels and other hospitality businesses.
Contents •• Assembling the swivel................................................................................................................................................. 5 •• Installing the LED TV Stand........................................................................................................................................ 6 •• Viewing the Connection Panel...................................................................................................................................
Accessories ✎✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎✎ The items’ colour and shapes may vary depending on the model. •• Remote Control & Batteries (AAA x 2) •• Hotel Mount Kit •• Quick Setup Guide •• Power Cord / Data Cable •• CI Card Adapter •• Warranty Card / Regulatory Guide (Not available in some locations) •• Cable Holder ✎✎ The stand and stand screw may not be included, depending on the model.
Assembling the swivel [[ WARNING: If you configure the TV to swivel, you must attach it securely to the floor, a desk, a dresser top, etc. as described in the installation instructions. The LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL. * The product ships with its stand's swivel angle set to 20°.
Installing the LED TV Stand The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right or 90 degrees left and right. Stand Components When installing the stand, use the provided components and parts. 43"~55" BN96-29120C (8EA: M4 x L12) 1 x4 2 ✎✎ Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen-side down. ✎✎ Insert the Stand Guide into the slot on the bottom of the TV.
65" BN96-32380B (4EA: M4 x L14) BN96-27704A (4EA: M4 x L12) 1 x4 BN96-32380B (4EA: M4 x L14) 2 ✎✎ Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen-side down. ✎✎ Insert the Stand Guide into the slot on the bottom of the TV. ✎✎ Slide and assemble it to the end line in the direction of arrow. 4 3 x4 BN96-27704A (M4 x L12) When the declination happened, try reassemble it category. ✎✎ Make sure to assembling stand guide attached on the TV.
¦¦ Hotel Mount Kit Short Bolt (2EA) Long Bolt (2EA) Washer (2EA) Nut (2EA) or [[ Affix the stand to a flat surface such as a dresser top, desk top, or entertainment center as shown. [ 8 English WARNING: To prevent injury, you must attach this TV securely to the floor, a table, a dresser top, etc. with the Hotel Mount Kit as described in these instructions.
Viewing the Connection Panel 1 3 2 ! 3 4 5 9 @ 0 # 6 7 8 ✎✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. ✎✎ When connecting an external device, match the colour of the connection terminal to the cable. 1 USB (5V 0.5A), USB (HDD 1.0A) / CLONING ‒‒ Connector for software upgrades and Media Play, etc. ‒‒ Service connection. 2 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component.
6 RJP This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional modules to improve device use and convenience. 7 HEADPHONE JACK Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound from the built-in speakers is disabled.
Supported Resolutions for each of UHD Input Signals •• Resolution: 3840 x 2160p, 4096 x 2160p ✎✎ An HDMI connection with HDMI UHD Color set to Off supports up to UHD 50P/60P 4:2:0 input signals, while an HDMI connection with HDMI UHD Color set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2 input signals.
Display Resolution You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose. After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 3840 x 2160 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly, referring to the user guide of the computer or its graphic card.
Mode Resolution Display format Horizontal frequency (KHz) Vertical frequency Clock frequency Polarity (horizontal / (Hz) (MHz) vertical) CEA-861 720(1440) x 576i 720(1440) x 480i 720 x 576 720 x 480 1280 x 720 1280 x 720 1920 x 1080i 1920 x 1080i 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 4096 x 2160 4096 x 2160 4096 x 2160 4096 x 2160 4096 x 2160 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 24 Hz 25 Hz 30 Hz 50 Hz 60 Hz
TV Controller TV Controller is a multi directional button that helps navigate without using the remote control. ✎✎ Some functions which require a PIN code may not be available. ✎✎ The product colour and shape may vary, depending on the model. ✎✎ Exits the menu when pressing the controller for more than 1 second. Control menu : Home : Source : Settings : Power off : Return Control Stick The Control Stick is located on the lower left corner of the back of the TV. w/v: Changes the volume.
Viewing the Remote Control ✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons. Turns the TV on and off. Display and select available video sources. Have direct access to channels. Alternately selects Teletext, Double or Mix. Electronic Programme Guide (EPG) display. Cut off the sound temporarily. Change channels. Adjust the volume. Display channel list on the screen. HOME Display the main on-screen menu.
Installing batteries (Battery size: AAA) ✎✎ NOTE •• Use the remote control within 7m of the TV. •• Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs. •• The colour and shape may vary depending on the model. •• Remote control button '3D' are not supported. When pressing these buttons, the TV unit does not respond.
Connecting the TV with STB (SBB) TV Rear Panel ETH MODEM Data Cable ✎✎ The rear panel may differ depending on the model. •• Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable. ✎✎ Use data communication. •• IR signals sent by the remote control to the TV or SBB / STB must meet the following specification to use IR pass through function. IR signal receiver specification ‒‒ Band pass filter centre frequency: 37.
Connecting the Bathroom Speakers You can connect the Bathroom Speakers using the following method. ¦¦ Connecting through the Variable Output (available without an external amplifier) TV Rear Panel 1 Speaker 2 VOL+ Volume Control Box VOL- ✎✎ The rear panel may differ depending on the model. 1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. Speaker + Speaker - N/C 2.
¦¦ Audio Loop In An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation procedures are given below. •• Detailed Drawing of the Headphone Box. TV Rear Panel HEADPHON BOX Headphone Box ✎✎ The rear panel may differ depending on the model.
Connecting the MediaHub HD Output to any external source connected to MediaHub HD on the hotel desk. MediaHub HD Rear HDMI USB TV Rear Panel RS/232 2 HDMI cable 1 RS-232 Data Cable ✎✎ The rear panel may differ depending on the model. 1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD. 2. Connect the HDMI IN 1, 2 or 3 port of the TV and the HDMI port of the MediaHub HD.
Connecting the RJP (Remote Jack Pack) Output to any external source connected to RJP on the hotel desk. RJP Rear USB HDMI TV Rear Panel VIDEO AUDIO RS/232 3 HDMI cable 2 Video Cable 4 RS-232 Data Cable 1 Audio Cable ✎✎ The rear panel may differ depending on the model. 1. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the AUDIO port of the RJP. 2. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP. 3. Connect the HDMI IN 1, 2 or 3 port of the TV and the HDMI port of the RJP.
•• The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10 seconds. All LEDs blink 5 times to acknowledge that this has been finished. •• The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart.
Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot) ✎✎ Scenario 1: When no inputs are connected. Attaching the CI Card Adapter Attach the adapter as shown side. ✎✎ To install the CI CARD Adapter, please remove the sticker attached to the TV. To connect the CI CARD Adapter, follow these steps. ✎✎ We recommend attaching the adapter before installing the wall mount, or inserting the “CI or CI+ CARD”. TV Rear 1. Insert the CI CARD Adapter into the two holes on the product 1.
Setting the Hotel Option Data To Enter: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.) To Exit from this menu : power off and turn on again. ✎✎ Depending on Model and Region, some menus do not exist on the TV set.
Hotel TV Function Category Description Item Channel Setup Gives you direct, immediate access to some of the Channel menu functions on the user Channel menu such as Auto Program, Antenna selection, etc. Channel Editor The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can: •• Change the channel numbers and names, manage genre and language groups and delete channels. •• Apply the video mute to channels you select.
Hotel TV Function Category Picture Menu Lock Menu Display Menu OSD Description Item Channel Menu Display Panel Button Lock Local Time Clock Enable or disable the Picture Menu. •• ON: The Main Menu is displayed. •• OFF: The Main Menu is not displayed. •• OFF: Broadcasting submenu is disable for guest. •• ON: Broadcasting subMenu is enable for guest. Turning the front panel (local key) operations on/off. •• Unlock: Unlocks all panel keys. •• Lock: Locks all panel keys.
Hotel TV Function Category Remote Jack Pack External Source HP Management Item Description Priority AV Lets you set the priority of the 7610 RJP AV jack. You can choose 1, 2, with 1 being the highest and 2 the lowest. The TV automatically displays the source with the higher priority. For example, lets say AV is set to 1 and HDMI is set to 2.
Hotel TV Function Category Bathroom Speaker Sub AMP Mode Sub AMP Volume Eco Solution Description Item Determines the Sub AMP operation mode. •• 0: Turns the Sub AMP function off (PWM off). •• 1: Determines the Sub volume according to the main volume control. •• That is, the sub volume is determined according to the Power On Volume, the Min Volume, and the Max •• 2: Determines the volume according to the bathroom control panel setting. Sub AMP Volume level at power on initial condition.
Hotel TV Function Category Description Item Network Setup If this item is entered into, network setup menu is displayed. The network setup menu is used for setting network like access internet. Soft AP: Using this function, you can connect the TV on your mobile devices. Set the options for connection of Wi-Fi device. •• Soft AP: Turns on or off the Soft AP. When Soft AP is set to On, your mobile devices can find the TV name in Wi-Fi connection list.
Hotel TV Function Category Factory Lock Enable/disable Password Popup. If this option is set to OFF, the TV will not display the password input popup window when entering the Factory menu. If set to ON, the password input popup window appears. Password Input If this option is enabled, a popup input box appears which asks for an 8-character security password. The admin must enter a password before applying or updating security preferences.
Hotel TV Function Category Item Self Diagnosis for TV Self Diagnosis for HTV System Software Update Sound Bar Out Contact Samsung Standby LED TV Reset Home Menu Description Enter Self Diagnosis Menu. •• Start Picture Test: Use this test when you experience a problem with your TV's picture. •• Start Sound Test: Use this test when you experience a problem with your TV's sound. •• Signal Information: Show digital broadcasting signal information.
Hotel TV Function Category Item REACH RF Mode You can turn on or off the REACH RF Mode. When set to On, the TV can operate with the REACH Server (Modulator) through the RF channel (DTV cable). REACH IP Mode You can turn on or off the REACH IP Mode. When set to On, the TV can operate with the REACH IP Server through the IP network. Server URL Setting REACH Channel Group ID REACH Solution REACH Update Time REACH Update Immediate H.
Hotel TV Function Category Item HMS Mode HMS Server URL Setting HMS HMS Gateway Role Description You can turn on or off the HMS Mode. When set to On, the TV can operate with the HMS Server through the IP network. You can enter the HMS Server's address. (Example: http://192.168.1.2:8080) When there is one TV per room, set to 'Master'. When there are more than one TVs per room, set the main TV to 'Master' and the others to 'Slave'. Set to On if you want to use the HalfTicker UI.
¦¦ Welcome Message The welcome message is used to display custom messages on the TV every time TV is turned on by a Guest in Hotel room. ‒‒ Welcome message settings are found in the Hotel Option Menu. ‒‒ Welcome message should be ON in order to display the message on power-on. Welcome Message OFF Edit Welcome Message Hospitality Logo OFF Hospitality Logo DL ... Logo Display Time ... ‒‒ You can make the Welcome Message and edit it in the Hotel Service menu.
¦¦ Hotel Logo The Hospitality Logo function displays the Hotel's picture image when the TV is initially powered on. ‒‒ Hospitality Logo settings are the Hospitality mode menus. ‒‒ The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. ‒‒ If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on.
¦¦ USB Cloning USB Cloning is used to download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload them to other TV sets. All the user-defined settings from the TV (Master Set) can be copied to the USB device. ✎✎ After cloning, certain features are applied when the TV is turned on again. •• Clone TV to USB: This copies stored data from the TV set to the USB device. 1. Insert a USB drive into the USB port on the rear of the TV. 2.
¦¦ Settings Cloned in the Hotel Menu ✎✎ The menu item does not support depending on the models.
Menu Item Sub Item Cloned or not Clock Type Standalone mode: Off/Ext. Clock Yes Local Time Standalone: Manual / TTX / Time Channel Interactive: Manual / Auto / TTX / Time Channel Yes Timer Type WakeUp / OnOff Yes Time Format 12 Hour / 24 Hour Yes Clock Test Failure / Success Yes Clock Normal Dim. 0~4 Yes Clock Standby Dim. 0~4 / 0~1 Yes Music Mode AV On / Off Yes Music Mode Comp.
Menu Item Cloning Network DRM ― No Clone USB to TV ― No Setting Auto Intialize On / Off Yes Network Setup ― No Apps ID Setting ― Yes Apps Setting ― No Service Discovery On / Off Yes LAN OUT On / Off Yes VLAN ID On / Off Yes Solution VLAN ID ― Yes Device VLAN ID ― Yes ARP Interval 2s / 5s / 10s / 30s / 60s / 120s / 180s Yes ― No FactoryLock On / Off Yes Password Popup On/Off Yes Password Input ― No Password Setting ― Yes Password Reset ― No Security Mod
Menu Item REACH Solution HMS H.
¦¦ Setting Auto Initialize When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture, Sound, Input, Channel, Setup, and Hotel Setup). This lets you set nearly all of the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can change the settings in those menus so they are no longer standard.
Menu Item Sound Output Sound Mode Balance Equalizer HDMI Input Audio Format Sound Expert Settings Digital Output Audio Format Audio Delay Auto Volume Sound Feedback Welcome Sound Aerial Digital Text (MHEG) Broadcasting Expert Settings Network Teletext Language Settings Primary Teletext Language Audio Options Audio Language Settings Secondary Teletext Language Primary Audio Language Soft AP Secondary Audio Language Channel Signal Level Clock Mode Clock Time System Manager Alarm Auto Protectio
¦¦ Plug & Play Hotel Plug & Play automatically performs Hotel mode selection, country setup, clock setup and picture mode setup. ‒‒ Hotel Plug & Play is available only one time when power is first turned on. ‒‒ This is available after first setting up the TV and transferring Clone TV data to a USB drive. ‒‒ To use next TV, you only need to exit Hotel Plug & Play, connect the USB, then Clone the USB to TV. ‒‒ Depending on model and region, some menus may not exist.
•• Region Settings OSD ‒‒ Initially highlighted: EU ‒‒ If you press the right directional button after selecting Change, you can change the country. ‒‒ If the country is changed, the TV automatically turns off and on. ‒‒ If you select the incorrect country, execute TV Reset again after entering the System section of the Hotel Menu. ‒‒ Before select country, refer to the country list information on the right.
¦¦ Multi Code Remocon Multi Code Remocon is a special transmitter which is designed to control each TV with one remote. This is useful where there is more than one TV in a location, such as in a hospital. The set ID number is displayed in the source osd. It is possible to support up to 9 different remote key transmissions for multiple codes. Each TV has an initial code of "0". ‒‒ The ID code can be set and reset in Analogue TV mode or PC mode. (not available in TTX channel or DTV channel.
¦¦ Channel Bank Editor (Smovie TV Only) Channel Bank Editor edits channels, with 3 different Bank Options. Depending on the Bank card, there are specific channels Hotel customers can enjoy. Setting the Channel Bank Editor under Stand-alone Mode 1. Enter the Hotel Standalone menu by “MUTE → 1 → 1 → 9 → ENTERE” 2. Please select SI vendor : “Smoovie” 3. find the new menu option, “Channel Bank Editor” 4.
5. Edit the channel bank like below example. a. BANK1 (Free channel): Select the channel that will be used when remote doesn’t have any card. b. BANK2 (Family Card - Green): Select the channel that will be used when remote has a GREEN CARD. c. BANK3 (Adult Card - Red): Select the channel that will be used when remote has a RED CARD. References of using SMOOVIE Remote Controller 1. If you select SMOOVIE as the SI Vendor, you should use the SMOOVIE Remote Controller. 2.
¦¦ Channel Editor Channel Editor edits channel number a and name. Use Channel Editor to sort the channels as user-desired channel numbers. Hospitality Mode Standalone SI Vendor OFF System Manager Security Power On DRM Channel System Menu OSD Home Menu Clock REACH Solution Music Mode H.Browser Solution Remote Jack Pack HMS External Source Virtual Standby HP Management Room Number r Channel Editor ...
Smovie On sequence Smovie TV used ( Air / Cable ) Step Mixed Channel Map On (Air and Cable both used) Only Air or Cable used Only Air or Cable used If the tv starts with Hotel P&P If P&P already done If the tv starts with Hotel P&P If P&P already done 1 Do the P&P, except channel store Enter Hotel menu Do the P&P all (Air or Cable auto tune) Enter Hotel menu 2 After P&P TV shows hotel menu Setup Mixed Channel Map On After P&P TV will show hotel menu 3 Setup Mixed Channel Map On TV power o
Channel List You can view channel information, All, TV, Radio, Data/Other, Analogue or Favourites 1 - Favourites 5. ✎✎ When you press the CH.LIST button on the remote control, Channel List screen displays immediately. •• All: Shows all currently available channels. •• TV: Shows all currently available TV channels. •• Radio: Shows all currently available radio channels. •• Data/Other: Shows all currently available MHP or other channels. •• Analogue: Shows all currently available analogue channels.
How to use Schedule Viewing in Channel List (digital channels only) When you set the Schedule Viewing in Channel List, you can only set the programme in Programme View. 1. Press the CH.LIST button, then select a desired digital channel. 2. Press the TOOLS button, and then select Programme View. The programme list for that channel appears. 3. Press the ▲ / ▼ buttons to select the desired programme, then press the ENTERE (Information) or INFO button. 4.
Using Option Menu t Set each channel using the menu options (Edit Favourites, Lock/Unlock, Delete, Deselect, Select All). 1. Press the TOOLS button in Channel List screen, then select the Edit Mode. A check box appears to the left of the channel. 2. Press the ▲/▼ buttons to select the desired channel, then press the ENTERE button. The (c) mark indicates the channel you’ve selected. ✎✎ You can select more than one channel. ✎✎ Press the ENTERE again to deselect the channel. 3.
¦¦ My Channel Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows the corresponding channels. •• You must select the country first, or you can not set a genre. •• If you select the genre without adding any channels, the channel list displays all of the available channels. •• My Channel works in Standalone mode only. •• SI Vendor in Standalone mode: This does not work if Smoovie is selected.
Key Guide Button Action Nav. Help BLUE Returns to the screen. (Genre setup: Last Country & Genre) Keep Previous Select Selects an item. Select Ch. Up/Down Move the highlight by page. (No Guide) UP/DOWN Navigates the each country, genre list. (in a circular manner.) RIGHT Selects the highlighted item, and then move the highlight to Genre section. RETURN Returns to the screen. (Genre setup: Last Country & Genre) (No Guide) EXIT Returns to the screen.
Highlight Interaction [Country Items] •• This page is only to indicate possible interactions. It may not be exactly identical to actual screens. ✎✎ NOTE •• Users can navigate the items in each country & genre list by pressing the up or down remote control keys. •• Circular navigation is supported.
Highlight Interaction [Default Genre] •• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
Mode Change Interaction 1 (1/2) •• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
Mode Change Interaction 1 (2/2) •• This page is only to indicate possible interactions. It may not be exactly identical to actual screens. 1 5 6 My Channel Current status : All Country/Sports Country 1 Genre ▲ Info Select Genre Mode change to Austria/News. OK All Country All Austria News Belgium (Dutch) Radio Belgium (French) Entertainment Czech Sports France Hotel Germany ▼ Navigation Help Area •• The genre mode change complete message is displayed. •• Timeout(5 sec.
Mode Change Interaction 1 (1/2) •• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
Power On Scenario [Last Memory] •• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
Genre Editor: This configures the genres of each of the hotel TV channels. •• This can be used through the Hotel Menu (Factory). •• Supported genres include News, Radio, Entertainment, Sports and Hotel. •• More than one genre can be selected for each channel at the same time. Country Editor (Channel Editor): This is the editor that configures the country for each of the hotel TV channels.
Elements No Name Description •• When the user enters this screen, the currently selected default item is highlighted. •• The Country Icon + Category Name are provided. (If the highlight is in the Main Frame, only the icon is displayed.) •• Moving the highlight ‒‒ Pressing the up or down button moves the highlight. 1 ‒‒ If the items cannot be displayed on one page, up and down indicators are provided.
✎✎ NOTE •• This is a definition of the Tools menu in the Left Frame Category. •• Only the Info item for each Register/Country is provided. Elements Category Tools menu Descriptions Registered, Country Information Registered Channels. The number of channels of each country. •• The items are displayed without ‘Channel’. Error Cases ✎✎ NOTE •• This is the message for when there are no saved channels in the Registered Channels list.
✎✎ NOTE •• This is the component for when there are no channels registered to the country category. Elements No Description Description The message is displayed when the currently selected country does not contain any items.
Key Guide Button Action Nav. Help CH UP/DOWN Moves the page. Page Select Selects or enters the corresponding Channel Browser area. Select RETURN Returns to the previous step (Factory Mode). Return UP/DOWN Moves the highlight up or down. (No Guide) RIGHT Moves the highlight to the Channel Browser area. (No Guide) INFO Shows the Category Info. (No Guide) TOOLS Shows the utility function menus. Tools EXIT Cancels and returns to the previous step (Factory Mode).
Channel Common Elements [+ Icon-method] Channel list representation rules Standard Item Construction Digital channels •• Check Box + Status Icon + Digital Channel Number + Channel Name •• Channel number representation format: ###-### (The channel number is represented by ‘-’.) Analog channels •• Check Box + Analog Icon + Analog Channel Number + Channel Name •• Channel number representation format: ### (‘-’ is not used to represent analog channel numbers.
Add to Countries / Edit Countries (1/3) •• Channel Manager > Browser > Tools > Add to Countries Key Guide Button Action Nav. Help Select Selects the highlighted item. Select RETURN Cancels and returns to the previous screen (Tools). Return UP/DOWN Moves the highlight over country items. Move LEFT/RIGHT Moves the highlight. Move INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode).
Elements No Name 1 Add to Countries Window 2 Guide Description •• If there are no channels that have been registered to the country list in the selected channels, “Add to Countries” is displayed as the title. •• A check box is displayed depending on whether the country that was selected when entering the screen is registered or not. •• The serial number or name of the selected channel.
Key Guide Button Action Nav. Help Select Selects the highlighted item. Select RETURN Cancels and returns to the previous screen (Tools). Return UP/DOWN Moves the highlight over country items. Move LEFT/RIGHT Moves the highlight. Move INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode). (No Guide) ✎✎ NOTE •• This is the definition for Edit Countries.
Key Guide Button Action Nav. Help Select Applies the changes and closes the window. Select RETURN Cancels and returns to the previous screen (Tools). Return ▲/▼ Changes the channel number of the selected channel. Adjust 0~9 Enters a digit. Number INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode). (No Guide) ✎✎ NOTE •• This is the function that changes the channel number.
Edit the Channel Number [External Input] (3/3) •• Channel Manager > Browser > Tools > Edit Channel Number Key Guide Button Action Nav. Help RED If a user presses the button, the channel number is initialized. Reset Select Applies the changes and closes the window. Select RETURN Cancels or returns to the previous screen (Tools). Return ▲/▼ Changes the channel number of the selected channel. Adjust 0~9 Enters a digit.
Elements No Name Description •• The channel number area. ‒‒ Both the numeric keys and the Up/Down keys are supported. ‒‒ If no value is allocated, as many ‘-’ are displayed as the number of digits. 1 ▲ Channel Number Area -- ▲ → ▼ 2 Source Name 3 Nav. Help Area 1 ▲ → ▼ 15 ▼ •• External input name ‒‒ Items that cannot be configured are disabled. •• If a user presses the red button, the channel number is initialized.
Elements No Name 1 Channel Name Edit Window 2 Channel Name 3 Keyboard Description •• The cursor and the character that are currently being entered are in the same colour as the highlight. •• When the maximum number of characters is reached, the cursor disappears. •• For a detailed scenario, refer to the keypad design document. Tools [Edit Mode] Edit Mode Content Highlight (when the number of the checked item is 0 or 1) When there is more than one checked item.
CH Banner [when a channel number is allocated to an external input] ✎✎ NOTE •• The TV channel banner specifications are applied. •• When there is an unsupported item or there is no corresponding information, the item values are not displayed. •• The channel name is represented as the ‘external input name’. Elements No Name 1 External Input Name Description The Channel List provides access to functions related to GenreTV. •• Country Mode •• Changes the genre mode.
¦¦ Sound Bar •• Samsung Sound-Bars and Hospitality TV ‒‒ Use Samsung Sound-Bars and Hospitality TV that support the ARC feature with HDMI. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to theTV’s sound through the Sound-Bar. ‒‒ Models supporting the ARC function are listed below: •• Sound-Bars: ‒‒ HW-K450/K550 ‒‒ HW-M550/M450/M4500 •• Setting the Sound-Bars to Hotel Mode 1.
¦¦ Security mode Design Specifications •• This is to restrict some functions such as TTX and external source (HDMI, USB) input in specific facilities such as a correctional facility. •• The Security menu is password-protected. Access to the Security menu is denied without the password. •• Security Setting ‒‒ The Security Setting can be set to ON or OFF. ‒‒ The default is OFF. ‒‒ Security Setting: If set to On, external source (HDMI, USB) input and the TTX function will be disabled.
Installing the Wall Mount The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own.
Securing the TV to the Wall [ Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To avoid the TV from falling 1.
Specifications Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 10°C to 40°C (50°F to 104°F) 10% to 80%, non-condensing -20°C to 45°C (-4°F to 113°F) 5% to 95%, non-condensing Model Name HG43EF690U HG50EF690U Display Resolution 3840 x 2160 3840 x 2160 43 inches (108 cm) 50 inches (125 cm) 20 W 20 W 20˚ / 60˚ / 90˚ 20˚ / 60˚ / 90˚ 975.8 x 569.0 x 62.6 mm 975.8 x 626.4 x 226.5 mm 1128.9 x 654.4 x 63.2 mm 1128.9 x 711.6 x 226.5 mm 8.
Dimensions 4 8 Front view / Side view •• HG43EF690U / HG50EF690U / HG55EF690U / HG65EF690U 7 1 2 3 6 5 8 4 (Unit: mm) 1 2 3 4 5 6 7 8 HG43EF690U 975.8 943.2 531.5 556.5 569.0 626.4 62.6 226.5 HG50EF690U 1128.9 1098.0 618.4 556.5 654.4 711.6 63.2 226.5 HG55EF690U 1242.6 1211.6 682.4 556.5 718.4 775.3 63.2 226.5 HG65EF690U 1463.5 1430.5 805.4 676.2 844.5 923.4 64.6 355.
Base Stand detail •• HG43EF690U / HG50EF690U / HG55EF690U (Unit: mm) 70.0 135 R9.5 R3.75 152 556.5 152.7 226.5 •• HG65EF690U (Unit: mm) 70.0 135 R9.5 R3.75 152 676.2 233.2 355.1 ✎✎ NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
Licence Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Open Source License Notice Open Source used in this product can be found on the following webpage. (http://opensource.samsung.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site AUSTRIA 0800 72 67 864 (0800-SAMSUNG) www.samsung.com/at/support BELGIUM 02-201-24-18 www.samsung.com/be/support (Dutch) www.samsung.com/be_fr/support (French) BOSNIA 055 233 999 www.samsung.com/support ALBANIA 045 620 202 www.samsung.
