User manual

Using the headset
14
•
Pairing works without attaching the headset to the Portable charger.
•
Pairing works without turning on the Portable charger.
•
Some of NFC-enabled devices may not support this feature.
•
To locate the mobile device’s NFC antenna and activate NFC, refer to the mobile
device’s user manual.
•
NFC pairing does not work with replacement Portable chargers as the headset is
matched with the provided Portable charger. Do not lose the Portable charger.
Connecting to multiple devices
Connecting to two mobile devices
With the Multi-point feature, connect the headset to two mobile devices at the same time.
•
To turn the Multi-point feature on, while in Pairing mode, press and hold the Volume up
button. The indicator light flashes blue twice.
•
To turn the Multi-point feature off, while in Pairing mode, press and hold the Volume
down button. The indicator light flashes red twice.
1
With a mobile device connected, enter Pairing mode again.
2
Activate Bluetooth on the secondary mobile device, scan for the device, and then select
the headset name “HM7100” from the list of devices.
If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to
the mobile device.
Some mobile devices may not be able to connect as a secondary mobile device.
3
Reconnect to the headset from the first mobile device.