User manual

Using the headset
18
Using voice prompts
Voice prompts inform you about the current status of the headset and usage informations. If
you cannot hear any voice prompts, make sure the voice prompt feature is turned on.
Turning the voice prompts on or off
•
In Pairing mode, press and hold the Volume up button for 3 seconds to turn the voice
prompts on. You will hear “Voice prompt is on”.
•
In Pairing mode, press and hold the Volume down button for 3 seconds to turn the voice
prompts off. You will hear “Voice prompt is off”.
Changing the language
In Pairing mode, press and hold both Volume buttons at the same time to select a language.
Supported languages may vary depending on the region in which it was purchased.
List of voice prompts
Status Voice prompt*
When you turn the
headset on or off
“Power on” or “Power off”
When you enter
Pairing mode
“Ready to pair. Search for the headset from the Bluetooth menu”
When you turn the
Multi-point feature on
or off
“Multi-point mode is on” or “Multi-point mode is off”
When you connect the
headset to the devices
“Device is connected” or “Two devices are connected”
When you disconnect
the headset from a
device
“Device is disconnected”
When you reject or end
a call
“Call terminated”
* Voice prompt content may vary.