Operation Manual

Using Auto Backup to send videos or photos
79
Wireless network (HMX-QF20 only)
Setting the PC to wake up from sleep mode
1
Click Start, and then open the Control Panel.
2
Configure the network connection.
Windows 7:
Click Network and Internet
p
Network and Sharing Centre
p
Change adapter settings.
Windows Vista:
Click Network and Internet
p
Network and Sharing Centre
p
Manage network connections.
Windows XP:
Click Network and Internet Connection
p
Network
Connection.
3
Right click Local Area, and then click Properties.
4
Click Configure
p
the Power manage tab
p
Allow this
device to wake the computer.
5
Click OK.
6
Restart the PC.
•
•
•
Setting the PC to turn on
1
Turn on the PC and press F2 while the PC is booting.
The BIOS setting menu will appear.
2
Select Advanced tab
p
Power management Setup.
3
Select Resume on PME
p
Enabled.
4
Press F10 to save your changes and continue booting.
5
Click Start, and then open the Control Panel.
6
Configure the network connection.
Windows 7:
Click Network and Internet
p
Network and Sharing Centre
p
Change adapter settings.
Windows Vista:
Click Network and Internet
p
Network and Sharing Centre
p
Manage network connections.
Windows XP:
Click Network and Internet Connection
p
Network
Connection.
•
•
•
•
About the Wakeup on LAN (WOL) feature
WOL (Wakeup on LAN)
WOL is a technology that allows you to turn on a PC from another location over a network connection or Internet or to set a PC to wake up from sleep mode.
With the WOL feature, you can automatically turn on or wake up a PC with your camcorder by touching Auto Backup.