User Manual High Definition Digital Camcorder www.samsung.com/register For video recording, use a memory card that supports faster write speeds. - Memory Card: A Class 6 SDHC card or above.
before reading this user manual SAFETY WARNINGS What the icons and signs in this user manual mean; Safety Icon Meaning There is a potential risk of death or serious injury. WARNING There is a potential risk of personal injury or damage to the product. CAUTION CAUTION To reduce the risk of fire, explosion, electric shock, or personal injury when using your camcorder, follow these basic safety precautions. Here are hints or page number references you will find helpful when you operate the camcorder.
IMPORTANT INFORMATION ON USE About this user manual Thank you for purchasing this Samsung Camcorder. Please read this user manual carefully before you use the camcorder and keep it handy for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting. This User Manual covers HMX-T10WN, HMX-T10BN, HMX-T10ON models. • Illustrations of model HMX-T10BN are used in this user manual. • The displays in this user manual may not be exactly the same as those you see on the LCD screen.
before reading this user manual • Copyrights: Please note that this camcorder is intended for individual use only. Data recorded on the storage media in this camcorder using other digital/analog media or devices is protected by the Copyright Act and cannot be used without permission of the owner of the copyright, except for personal enjoyment. Even if you record an event such as a show, performance, or exhibition for personal enjoyment, we strongly recommend that you obtain permission beforehand.
important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
important safety instructions 15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 16. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register.
23. OVERLOADING: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 24. OBJECTS AND LIQUIDS: Never push objects of any kind into this CAMCORDER through openings as they may touch dangerous voltage points or short out a part that could result in a fire or electric shock. Never spill liquids of any kind onto the CAMCORDER. Should spillage occur, unplug unit and have it checked by a technician before use. 25.
important safety instructions USER INSTALLER CAUTION: Your authority to operate this FCC certified equipment could be voided if you make changes or modifications not expressly approved by this party responsible for compliance to part 15 FCC rules. NOTE: AMP(S) INSIDE THIS PRODUCT CONTAIN Hg L MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecycle.org, eiae.
safety information The safety precautions illustrated below are to prevent personal injury or material damages. Heed all instructions carefully. WARNING Prohibited action. Do not touch the product. CAUTION Do not disassemble the product. This precaution must be followed. Means that there is a potential risk of serious personal injury. Means that there is a potential risk of personal injury or damage to the product. Unplug from the power supply.
safety information ng ani cle Do not dispose of the battery in a fire as it may explode. Never use cleaning fluid or similar chemicals to clean the camcorder. Do not spray cleaners directly on the camcorder. Keep the used lithium battery or memory card out of the reach of children. If the lithium battery or memory card is swallowed by a child, consult physician immediately. Do not plug or unplug the power cord with wet hands. There is a risk of electric shock.
W 4 CAUTION W 4 Do not drop or expose the camcorder, battery, AC adaptor, or other accessories to severe vibrations or impact. This may cause a malfunction or injury. Do not use the camcorder on a tripod (not supplied) in a place where it is subject to severe vibrations or impact. Do not leave the camcorder in a closed vehicle for a long time, where the temperature is very high. Do not expose the camcorder to soot or steam. Thick soot or steam could damage the camcorder case or cause a malfunction.
W 4 W 4 safety information W 4 W 4 Do not use the camcorder near a TV or radio: This could cause distortion on the TV screen or interference in the radio broadcasts. Do not use the camcorder near sources of strong radio waves or magnetism such as speakers or large motors. Noise from these sources could distort the video or audio you are recording. W 4 w T Do not hold the camcorder by the LCD monitor when lifting it. The LCD screen could detach and the camcorder may fall.
contents QUICK START GUIDE 07 You can record videos in H.
contents BASIC RECORDING 39 Recording videos Capturing photos during video recording Recording photos Recording with ease for beginners (smart auto) Zooming BASIC PLAYBACK 40 41 43 Changing the playback mode Playing back videos Viewing photos USING THE MENU ITEMS 45 46 48 Handling menus and quick menus Menu items Quick menu items ADVANCED RECORDING 49 50 50 51 51 52 53 54 55 55 56 57 58 59 60 61 62 62 63 63 64 65 SCENE Video Resolution Video Quality Photo Resolution Photo Sharpness White Balance
ADVANCED PLAYBACK 66 67 68 68 Play Option Highlight Slide Show Option File Info EDITING FILES 69 70 71 72 Deleting files Protection from accidental erasure Dividing a video Combining videos SYSTEM SETTING 73 74 74 75 75 76 76 76 77 77 78 79 79 80 81 82 82 83 83 84 84 85 85 86 Setting menu items Card Info Format File No.
contents CONNECTING TO A TV 89 90 Connecting to a high definition TV with HDMI Connecting to a regular TV Viewing on a TV screen DUBBING VIDEOS 91 Dubbing to a VCR or DVD/HDD recorder PRINTING PHOTOS 92 Direct printing with a PictBridge printer 87 91 92 USING WITH A WINDOWS COMPUTER 94 TROUBLESHOOTING MAINTENANCE & ADDITIONAL INFORMATION SPECIFICATIONS 87 What you can do with a windows computer 94 95 Using the Intelli-studio program 100 Using as a removable storage device 102 Warning indica
quick start guide This quick start guide introduces the basic operation and features of your camcorder. See the reference pages for more information. You can record videos in H.264 format! You can record videos in H.264 format that is convenient to email and share with your friends and family. You can also take photos with your camcorder. STEP 1: Get ready 1. Insert the battery to the camcorder. page 17 • Make sure that the SAMSUNG logo is facing up and the battery is placed as shown in the figure. 2.
quick start guide Recording videos Recording photos Your camcorder uses advanced H.264 compression technology to give you the clearest video quality. 1. Open the LCD screen. 1. Open the LCD screen. 2. Press the Recording start/stop button. • To stop recording, press the Recording start/stop button. 00:00:00 2. Press the PHOTO button lightly to adjust the focus. 3. Fully press the PHOTO button when the subject is in focus.
STEP 3: Play back videos or photos Viewing videos or photos on the LCD screen You can find recordings quickly by using the thumbnail index view. 1. Touch the Play ( ) tab on the screen in STBY mode. 2. Touch the thumbnail ( STBY 00:00:00 HD / SD / ) tab, then touch the desired image. [307Min] HD 9999 SD OFF 3/3 SUPER Viewing on a high definition TV You can enjoy HD (high definition) videos on an HDTV. page 87 You can also play back videos on an SD (standard definition) image quality TV.
quick start guide Importing and viewing videos/photos from the camcorder to your PC 1. Launch the Intelli-studio program by connecting the camcorder to your PC with a USB cable. • A new file saving screen appears with the Intelli-studio main window. Click “Yes”, and the uploading procedure starts. 2. The new files are saved to your PC and registered to “Contents Manager” on the Intelli-studio program. • You can arrange the files by different criteria such as Face, Date, etc.
getting to know the camcorder WHAT'S INCLUDED WITH YOUR CAMCORDER Your new camcorder comes with the following accessories. If any of these items is missing from your box, call Samsung’s Customer Care Center. Model name Color Memory card slot LCD screen Lens HMX-T10WN HMX-T10BN HMX-T10ON White Black Orange Yes Color /Touch panel 10x (Optical) 100x (Digital) • Although some features of the models are different, they operate in the same way.
getting to know the camcorder LOCATION OF CONTROLS Front/Left Lens Internal microphone Display button Power button SMART button TFT LCD screen (Touch screen) Q.MENU button Zoom (W/T) button Recording start/stop button 12 Internal speaker During a recording, be careful not to block the internal microphone and lens.
Rear/Right/Top/Bottom Zoom (W/T) lever PHOTO button Recording start/stop button Charging (CHG) indicator DC IN jack MODE button / Mode indicator : Record mode • (Video/Photo) • : Play mode Jack cover (DC IN) USB, HDMI, AV(Audio/Video) jack Hand strap hook Jack cover (USB, HDMI, AV) Tripod receptacle Battery/Memory card cover OPEN/CLOSE switch Memory card slot Battery slot Battery release switch 13
getting to know the camcorder IDENTIFYING THE SCREEN DISPLAYS The available functions vary depending on the operation mode you’ve selected. Different indicators appear depending on the setting values. PRECHECK! • This On Screen Display (OSD) is shown in the record ( ) mode only. • Select the record mode by pressing the MODE button.
PRECHECK! • This On Screen Display (OSD) is shown in video play ( HD / SD ) mode only. • Select the Play ( ) tab on the LCD screen to select the video play ( HD / SD ) mode. page 40 Video play mode Top of the LCD screen Indicator 00:00:05/00:00:50 100_0001 Meaning Video play mode JAN/01/2010 12:00AM , Operating status (play/pause) 00:00:05/00:00:50 Playback time/recorded time Storage media (Memory card) Battery info.
getting to know the camcorder PRECHECK! • This On Screen Display (OSD) is shown in photo play ( ) mode only. • Select the Play ( ) tab on the LCD screen to select the photo play ( ) mode. page 40 Photo play mode Top of the LCD screen 100_0001 Indicator 1/10 Meaning Photo play mode JAN/01/2010 12:00AM X1.1 / 100_0001 1/10 Slide show / Playback zoom (X1.1~X8.0) File name (file number) Photo image counter (current image / total number of recorded images) Storage media (memory card) Battery info.
getting started INSERTING/EJECTING THE BATTERY Purchase extra batteries to allow continuous use of your camcorder. Battery release switch To insert the battery To eject the battery 1. Open the battery cover by sliding the OPEN/CLOSE switch toward OPEN. 1. Open the battery cover by sliding the OPEN/CLOSE switch toward OPEN. 2. Insert the battery into the battery slot until it locks. • Make sure that the SAMSUNG logo is facing up and the battery is placed as shown in the figure. 2.
getting started CHARGING THE BATTERY You can charge the battery using the AC power adaptor or the USB cable. PRECHECK! • Insert the battery into the camcorder. page 17 • To charge, use the supplied AC power adaptor or the USB cable. To charge the battery Charge the battery using the AC power adaptor or the USB cable. • The charging (CHG) indicator lights up and charging starts. After the battery is fully charged, the charging (CHG) indicator turns green.
CHECKING THE BATTERY STATE You can check the charging state and remaining battery capacity. To check the charging state The color of the LED indicates the power or charging state. Charging (Orange) Fully charged (Green) Error (Off) Battery level display The battery level display shows the amount of battery power remaining in the battery.
getting started Available running time for the battery Battery type BP125A Charging time Using the AC power adaptor: approx. 120 min. Using the USB cable: approx. 270 min. Video resolution HD SD Continuous recording time Approx. 110 min. Approx. 120 min. Playback time Approx. 140 min. Approx. 160 min. • Charging time: Approximate time in minutes required to fully charge a completely exhausted battery. • Recording/Playback time: Approximate time available when you have fully charged the battery.
About the battery • Battery Properties A lithium-ion battery is small-sized and has a high capacity. Low ambient temperature (below 50ºF (10Cº)) may shorten its usage time and affect its function. Before recording in low temperatures, put the battery into your pocket to warm it, then install it in the camcorder. • Make sure to store the battery separately after use. - A small amount of battery power is consumed when the battery is stored in the camcorder even if the camcorder power is off.
basic operation of the camcorder TURNING YOUR CAMCORDER ON/OFF LCD screen 1. Open the LCD screen to turn on the camcorder. • Your camcorder turns on automatically when you open the LCD screen. 2. To turn off the camcorder, press the Power ( ) button for about one second. Power button • The camcorder operates the self-diagnosis function when powered on. If a warning message appears, refer to ‘warning indicators and messages’ (pages 102~106) and take corrective actions.
SWITCHING TO THE POWER SAVING MODE If you need to use the camcorder for an extended time, the following functions enable you to prevent unnecessary energy consumption. Quick On STBY Mode in the STBY mode The camcorder switches to "Quick On STBY" mode when you close the LCD screen. page 81 Sleep mode in the Play mode (includes the thumbnail index view) • The camcorder switches to the sleep mode when you close the LCD screen and then, if idle for more than 20 minutes, the camcorder turns off.
basic operation of the camcorder SETTING THE OPERATION MODES You switch the operating mode in the following order each time you press the MODE button. Record mode ( ) ↕ Play mode ( ). • Each time the operation mode changes, the respective mode indicator lights turn on. • Touching the Play ( ) tab in the record mode switches the operation mode to the play mode. MODE button / Mode indicators • (Record mode): To record videos or photos. • (Play mode): To play videos or photos, or edit them.
USING THE TOUCH PANEL The touch panel lets you playback and record with a simple touch of your finger. Place your hand on the rear side of the LCD screen, then touch the items displayed on the screen. Touch Slightly touch items with your finger to select them or to execute functions. STBY 00:00:00 [307Min] 9999 OFF SUPER • Do not place a protective film on the LCD screen.
first time settings SETTING THE TIME ZONE AND DATE/TIME FOR THE FIRST TIME Set the date and time of your local area when you turn on the camcorder for the first time. Home London,Lisbon 1. Open the LCD screen to turn on the camcorder. • The time zone (“Home”) screen appears displaying settings for Lisbon and London (Greenwich Mean Time). 2. Select your local area on the map by touching the left ( ) or right ( ) tab on the LCD screen, and then press the ( ) tab. • The “Date/Time Set” screen appears. 3.
SELECTING THE LANGUAGES You can select the language of the menu or messages displayed on the LCD screen. The camcorder retains the language setting even when you turn it off. 1. Touch the Menu ( 2. Touch the up ( ) Setting ( ) tab. )/down ( ) tab until “Language” appears. 3. Touch “Language,” and then touch the desired OSD language. Language Demo 6/6 ) tab to complete the setting. 4. Touch the Exit ( ) or Return ( • The camcorder displays the menus and messages in the language you selected.
getting ready to start recording INSERTING / EJECTING A MEMORY CARD (NOT SUPPLIED) Terminal portion To insert a memory card To eject a memory card 1. Open the memory card cover by sliding the OPEN/CLOSE switch toward OPEN. 1. Open the memory card cover by sliding the OPEN/CLOSE switch toward OPEN. 2. Insert the memory card into the card slot until it softly clicks. • Make sure that the camcorder is placed as shown above and the terminal portion of the card is facing up. 2.
SELECTING A SUITABLE MEMORY CARD (NOT SUPPLIED) Compatible memory cards • You can use SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards with this camcorder. We recommend you use an SDHC (Secure Digital High Capacity) card. This camcorder supports SD cards up to 2GB. We cannot guarantee normal operation with SD cards bigger than 2GB. • MMC (Multi Media Card) and MMC Plus are not supported. • Compatible memory card capacity: SD: 1GB ~ 2GB SDHC: 4GB ~ 32GB • Use compatible memory card brands.
getting ready to start recording Handling a memory card • We recommend that you power off before inserting or removing the memory card to avoid data loss. • We can not guarantee that you can use memory cards formatted by other devices. When you format a card, be sure to format the memory card using this camcorder. • You must format newly-purchased memory cards, memory cards with data that your camcorder cannot recognize, and cards with data saved by other devices.
RECORDABLE TIME AND CAPACITY Listed below are the available video recording times and the number of photos the camcorder can take, by card memory size and resolution. Refer to the recordable video time and the number of photos when recording videos or taking photos.
getting ready to start recording USING THE HAND STRAP Attach the strap and place your hand through the loop to prevent the camcorder from being dropped. Insert the end of the hand strap into the hook of the camcorder as shown in the illustration. ADJUSTING THE LCD SCREEN The wide LCD screen on your camcorder offers high quality image viewing. 1. Open the LCD screen with your finger. • The screen opens up to 90°. 2. With the LCD screen open 90°, rotate it forwards (towards the lens) or backwards.
BASIC CAMCORDER POSITIONING Use both hands while taking a video or photo to prevent the camcorder from shaking. Try to avoid any slight movement while shooting. Aim the camcorder as shown in the illustration. 1. Loop the hand strap around your wrist. 2. Hold the camcorder with both your hands. 3. Make sure your footing is stable and there is no danger of colliding with another person or object. 4. Aim and focus as shown in the illustration.
basic recording RECORDING VIDEOS This camcorder supports both High Definition (HD) and Standard Definition (SD) image resolutions. Set the resolution you want before recording. page 50 PRECHECK! • Insert a memory card. page 28 • Select the record mode by pressing the MODE button. page 24 Two recording start/stop buttons to suit your preference! This camcorder features two Recording start/stop buttons. One is on the rear side of the camcorder, the other is on the LCD screen.
• If power is interrupted or an error occurs during recording, the video may not be recorded/edited. • Samsung is not responsible for any damage caused by a failure of normal recording or playback operations because of a memory card error. • Note that damaged data cannot be recovered. • Do not turn off the camcorder or remove the memory card while the camcorder is accessing the memory card. Doing so may damage the memory card or the data in the memory card. • Videos are compressed in the H.264 (MPEG-4.
basic recording CAPTURING PHOTOS DURING VIDEO RECORDING Your camcorder can capture photos without interrupting video recording. PRECHECK! • Insert a memory card. page 28 • Select the record mode by pressing the MODE button. page 24 1. Press the Recording start/stop button. • The recording () indicator appears, and recording starts. 2. While recording the video, frame the scene you want to photograph, and then press the PHOTO button.
RECORDING PHOTOS You can take photos and store them in the storage media. Set the desired resolution before recording. page 51 PRECHECK! • Insert a memory card. page 28 • Select the record mode by pressing the MODE button. page 24 1. Select a subject to record. • Adjust the LCD panel to the best angle for recording. • Use the Zoom lever or Zoom button to adjust the size of the subject. page 39 2. Frame the subject in the LCD screen, and then half-press the PHOTO button.
basic recording RECORDING WITH EASE FOR BEGINNERS (SMART AUTO) In Smart Auto mode, your camcorder automatically chooses the appropriate settings based on the type of scene it detects (Indoor, Night, etc.). Smart Auto mode is helpful if you are not familiar with the best camcorder settings for various scenes. 1. Press the SMART AUTO button. • The Smart Auto ( ) and Anti-shake(OIS) ( icon appear on the LCD screen. ) 2. Align your subject in the frame.
ZOOMING This camcorder allows you to record using optical 10x power zoom and digital zoom by sliding the Zoom lever or pressing the Zoom button on the LCD panel. To zoom in Press the T (zoom) button on the LCD panel or slide the zoom lever towards T (telephoto). • The distant subject is gradually magnified. • The highest zoom magnification ratio is 10x in the normal zoom-in. W : Wide angle To zoom out Press the W (zoom) button on the LCD panel or slide the zoom lever towards W (wide angle).
basic playback CHANGING THE PLAYBACK MODE • You can set the record mode and the play mode in turn with the MODE button. You can also switch the operation mode directly into the playback thumbnail display by touching the Play ( ) tab on the LCD screen. • The most recently created file is highlighted in the thumbnail view. • The camcorder selects the thumbnail display options based on the standby mode that was last used.
PLAYING BACK VIDEOS You can preview recorded videos in the thumbnail index view, find the video you want quickly, and playback directly. PRECHECK! • Insert a memory card. page 28 ) tab on the LCD screen to select the play mode. page 40 • Touch the Play ( 1. Touch the HD ( HD ) or SD ( SD ) tab. • Video thumbnails corresponding to the video resolution you selected appear on the screen. • To change the current thumbnail page, touch the up ( ) or down ( ) tab. 2.
basic playback Various playback operations Playback / Pause / Stop • Playback and pause alternate when you touch the Pause ( ) tab to stop playback. • Touch the Return ( ) / Play ( ) tab during playback.
VIEWING PHOTOS You can view recorded photos using various playback functions. PRECHECK! • Insert a memory card. page 28 ) tab on the LCD screen to select the play mode. page 40 • Touch the Play ( 1. Touch the Photo ( ) tab. • The thumbnail view appears. • To change the current thumbnail page, touch the up ( down ( ) tab. HD 2. Touch the photo you want to display. • The camcorder displays the photo you selected in full screen and playback control tabs appear briefly.
basic playback Viewing a slide show You can view a photo slide show with background music. ) tab during photo playback. Touch the Slide Show ( • The ( ) indicator appears. The slide show starts from the current selected photo. • To stop the slide show, touch the Return ( ) tab. 100_0014 14/17 To start a slide show in the menu screen Touch the Menu ( ) tab “Slide Show Start.
using the menu items HANDLING MENUS AND QUICK MENUS The instructions below are examples of how to access and use menu items using the Menu Tab and the Q.MENU Button. When you access and use other menu items, use these examples as guides. STBY 00:00:00 [307Min] 9999 OFF PRECHECK! • Insert a memory card. page 28 • Select the record mode by pressing the MODE button. page 24 Using the Menu ( SUPER Q.MENU button Menu tab ) tab 1. Touch the Menu ( ) tab on the touch panel. • The menu screen appears.
using the menu items MENU ITEMS • The items available in each menu vary depending on the operating mode. • For item operation details, see the page number listed under Page in the table. Recording menu items 46 Items Default value Page SCENE Auto 49 Video Resolution 1080/60i 50 Video Quality Fine 50 Photo Resolution 2880x1620 51 Photo Sharpness Normal 51 White Balance Auto 52 Aperture Auto 53 Shutter Auto 54 EV 0 55 Super C.
Playback menu items Operation mode Video Photo Default value Page X Play All 66 X X - 67 - 69 Off (Single) 70 Divide X X - 71 Combine X X X - 72 File Info - 68 Slide Show Start X X - 44 Slide Show Option X X - 68 Thumbnail Single Thumbnail Single Play Option X Highlight Delete Protect Items Edit : available, X : not available • Menu options and default values may be changed without prio
using the menu items QUICK MENU ITEMS • The items available in each menu vary depending on the operating mode. • For item operation details, see the page number listed under Page in the table.
advanced recording SCENE Using the iScene function, you can select a setting that matches the scene you are shooting (Sports, Portrait, etc.). Based on your selection, the camcorder sets the appropriate shutter speed and aperture automatically for optimal recording. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “ SCENE.” 2. Touch the desired submenu item. • To change the current page, touch the up ( tab. 3.
advanced recording Video Resolution You can select the resolution of the video to be recorded. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “Video Resolution.” 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( ) or Return ( ) tab. Video Resolution 1080/60i 720/60p 1/1 480/60p Submenu items • 1080/60i ( • 720/60p ( • 480/60p ( ): Records in the HD (1920x1080/60i) format. ): Records in the HD (1280x720/60p) format.
Photo Resolution You can select the resolution of the photo to be recorded. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “Photo Resolution.” Photo Resolution 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( 2880x1620 ) or Return ( ) tab. 1920x1080 1/1 Submenu items • 2880x1620 ( • 1920x1080 ( ): Records in the 2880x1620 resolution. ): Records in the 1920x1080 resolution.
advanced recording White Balance Using the White Balance function, you can select a setting that matches the light illuminating the subject you are shooting (Daylight, Fluorescent, etc.). Based on your selection, the camcorder automatically adjusts the color of the subject so the whites and colors in your recording or photo look natural. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “White Balance.” 2. Touch the desired submenu item. 3.
Aperture The camcorder adjusts the aperture (lens opening) automatically depending on the subject and recording conditions. You can also manually adjust the aperture. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “Aperture.” Aperture 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Auto ) or Return ( ) tab. Manual 1/1 Submenu items • Auto: Sets the aperture value automatically.
advanced recording Shutter The camcorder automatically sets the shutter speed depending on the scene’s brightness. User high shutter speeds to record fast moving objects and low shutter speeds to record slow or stationary objects or objects in dimmer light. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “Shutter.” Shutter 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Auto ) or Return ( ) tab.
EV Depending on the intensity of the ambient light, your videos and photos may be too bright or dark. Using the EV function, you can manually adjust video and photo image brightness. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “EV.” EV ) tab to adjust the 2. Touch the decrease ( ) or increase ( setting values. You can choose from the following settings: • EV values ( ): -2.0, -1.6, -1.3, -1.0, -0.6, -0.3, 0, +0.3, +0.6, +1.0, +1.3, +1.6, +2.0 3.
advanced recording Back Light When a subject is lit from behind, this function compensates for back lighting so that the subject does not appear too dark. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “Back Light.” Back Light 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( OFF ) or Return ( ) tab. Submenu items • Off: Disables the function. • On ( ): Backlight compensation brightens the subject.
Focus The camcorder usually focuses on a subject automatically (auto focus). When you turn the camcorder on, focus is always set to automatic. You can also set the focus manually. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( Focus ) tab “Focus." Auto Manual 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( 1/1 ) or Return ( Touch Point ) tab.
advanced recording Using the touch point function Using the Touch Point function, you can have the camcorder focus on a small section of the picture. You get the camcorder to focus on a particular point by touching the desired point on the LCD screen. STBY 00:00:00 [307Min] 9999 OFF To activate the touch point with a long touch You can activate touch point by lightly pressing a particular point on the LCD screen for about 2 seconds.
• When you turn on Smart Auto mode, it automatically sets Anti-shake (OIS) to On. • The Anti-Shake (OIS) function may not correct gross camcorder shake entirely. To decrease shake, hold the camcorder firmly with both hands. • When this function is On, the actual movement of the subject and the movement displayed on the screen may be slightly different. • When you record in dark or dim light at high magnification while this function is On, afterimages may stand out.
advanced recording Fader You can give your recording a professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a sequence. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “Fader.” Fader 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Off ) or Return ( In ) tab.
Tele Macro Using the Tele Macro function, you can get close up images which are created by focusing on a small portion of a large object at a wide angle. It is useful to get close up images of flowers or insects etc. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “Tele Macro.” Tele Macro 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Off ) or Return ( ) tab. On 1/1 Submenu items • Off: Disables the function.
advanced recording Cont. Shot The Continuous Shot function lets you capture up to eight photos in rapid succession to give you more photo-taking opportunities when recording moving subjects. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “Cont. Shot.” 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( ) or Return ( Cont. Shot Off On ) tab. 1/1 Submenu items • Off: The camcorder records only one photo image.
Digital Zoom The digital zoom enables higher zoom magnification than the optical zoom. Digital zoom can electronically magnify an image created by the optical lens up to 1000 times. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( Digital Zoom ) tab “Digital Zoom.” Off On 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( 1/1 ) or Return ( ) tab. STBY 00:00:00 [307Min] 9999 Submenu items OFF • Off : Disables Digital Zoom.
advanced recording Quick View Using the Quick View function, you can view the most recently recorded video or photo images immediately after you have recorded them. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “Quick View.” Quick View 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Off ) or Return ( ) tab. On 1/1 Submenu items • Off: Quick View ( ) icon does not appear on the screen after you finish the recording.
Guideline Guideline displays straight line patterns on the LCD screen that can help you set the image composition when recording images. The camcorder provides 3 types of guidelines. PRECHECK! Select the record mode by pressing the MODE button. page 24 1. Touch the Menu ( ) tab “Guideline.” Guideline 2. Touch the desired guideline according to the subject. • The selected guideline appears on the screen. 3. To exit the menu, touch the Exit ( ) or Return ( Off ) tab.
advanced playback Play Option You can select a specific video playback option. PRECHECK! Select the Play ( ) tab on the LCD screen to select the Video play ( 1. Touch the Menu ( HD / SD ) mode. page 40 ) tab “Play Option.” Play Option 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Play All ) or Return ( ) tab.
Highlight The Highlight function plays a portion of each recorded video at random. PRECHECK! Select the Play ( ) tab on the LCD screen to select the Video play ( 1. Touch the Menu ( HD / SD ) mode. page 40 ) tab. “Highlight.” Highlight 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Recent ) or Return ( ) tab. All 1/1 Submenu items • Recent ( ): Plays a portion of all videos created within the last 24 hours. • All ( ): Plays a portion of all video files.
advanced playback Slide Show Option You can set the play options for the slide show with the slide show setting menus. PRECHECK! Select the Play ( ) tab on the LCD screen to select the photo ( 1. Touch the Menu ( ) mode. page 40 ) tab. “Slide Show Option.” 2. Touch the desired submenu item and touch the ( set the value you want. 3. To exit the menu, touch the Exit ( ) or Return ( )/( Slide Show Option ) tab to ) tab.
editing files DELETING FILES You can erase your recordings one by one or all at once. PRECHECK! • Insert a memory card. page 28 ) tab on the LCD screen to select the play mode. page 40 • Touch the Play ( 1. Touch the HD ( HD ), SD ( SD ), or Photo ( ) tab. Delete • Videos or photos appear as thumbnails. Select Files ) tab “Delete” touch the desired 2. Touch the Menu ( All Files submenu item. 1/1 • If you touch “Select Files,” you will see image thumbnails. Go to Step 3.
editing files PROTECTION FROM ACCIDENTAL ERASURE You can protect important recordings from accidental erasure. The protected videos and photos can not be deleted unless you format the memory card or cancel the protection. PRECHECK! • Insert a memory card. page 28 ) tab on the LCD screen to select the play mode. page 40 • Touch the Play ( 1. Touch the HD ( HD ), SD ( SD ), or Photo ( • Videos or photos appear as thumbnails. ) tab. 2. Touch the Menu ( ) tab “Protect” touch the desired submenu item.
DIVIDING A VIDEO You can divide a video into two, and easily delete a section you no longer need. As this function edits the original file, make sure to back up the original before dividing it. PRECHECK! • Insert a memory card. page 28 ) tab on the LCD screen to select the Video play ( • Select the Play ( HD / SD ) mode. page 40 1. Touch the Menu ( ) tab “Edit” “Divide.” Edit 2. Touch the video you want to edit. Divide • The selected video is displayed as paused. Combine 1/1 3.
editing files COMBINING VIDEOS You can combine two different videos. As this function edits the original files, make sure to back up the original files before combining them. PRECHECK! • Insert a memory card. page 28 ) tab on the LCD screen to select the Video play ( • Select the Play ( 1. Touch the Menu ( HD / SD ) mode. page 40 ) tab “Edit” “Combine.” 2. Touch the video thumbnails of the videos you want to combine in the order you want them combined.
system setting SETTING MENU ITEMS • Refer to page 45 for setting menus. • For item operation details, go to the page number listed in the table under Page. Items Default value Page Card Info - 74 File No.
system setting Card Info This function shows you the storage information of the memory card, such as used memory space, available memory space, etc. PRECHECK! Insert a memory card. page 28 1. Touch the Menu ( ) Setting ( ) tab “Card Info.” • Used memory space, available memory space, and recordable time appear. Available space and recordable time depend on the video resolution you’ve selected. 2. To exit the menu, touch the Return ( ) tab. Card Info • Used: 40.5MB • Free: 30.
File No. File names (numbers) are assigned to recorded images according to the numbering option you select. 1. Touch the Menu ( ) Setting ( ) tab “File No..” File No. 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Series ) or Return ( ) tab. Reset 1/1 Submenu items • Series: Assigns file numbers in a continuous sequence even after you replace or format the storage media or delete all files.
system setting Date/Time Set Date/Time Set Month By setting the date and time, you can display the date and time of the recording during playback. page 26 Day JAN / Hr 12 01 Year / 2010 Min : 00 AM Date Type You can set the display format for the date. ) Setting ( ) tab “Date Type.” 1. Touch the Menu ( 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( ) or Return ( ) tab.
Date/Time Display You can set whether or not the date and/or time are displayed on the LCD screen. PRECHECK! Before you use the “Date/Time Display” function, you must set the date and time. page 76 1. Touch the Menu ( ) Setting ( ) tab “Date/Time Display.” Date/Time Display 2. Touch the desired submenu item. Off ) tab. 3. To exit the menu, touch the Exit ( ) or Return ( • The date/time is displayed on the LCD screen according to the selected option.
system setting Auto LCD Off To reduce power consumption, the camcorder automatically dims the brightness of the LCD screen if the camcorder is idle for a period of time. 1. Touch the Menu ( ) Setting ( ) tab “Auto LCD Off.” Auto LCD Off 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Off ) or Return ( ) tab. On 1/1 Submenu items • Off: Disables the function.
Beep Sound The Beep Sound function lets you control whether a beep sounds when you touch certain buttons on the screen. 1. Touch the Menu ( ) Setting ( ) tab “Beep Sound.” Beep Sound 2. Touch the desired submenu item. 3. To exit, touch the Exit ( disappears. Off ) or Return ( ) tab until the menu On 1/1 Submenu items • Off: Disables the function. • On: You will hear a beep when pressing buttons or tabs such as the Power ( ) button or Recording start/stop button.
system setting Auto Power Off You can set your camcorder to turn off automatically if it is idle for 5 minutes without an operation. This function prevents unnecessary power consumption. 1. Touch the Menu ( ) Setting ( ) tab “Auto Power Off.” Auto Power Off 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Off ) or Return ( ) tab. 5 Min 1/1 Submenu items • Off: Disables the function. • 5 Min: The camcorder turns off if idle for 5 minutes without an operation.
Quick On STBY When you are going to record frequently for an extended time, use the Quick On STBY function to reduce energy consumption and battery drain. With the Quick On STBY function On and the camcorder in standby mode, closing the LCD screen starts Quick On STBY. Once you are ready to record again and you open the LCD screen, Quick On STBY triggers the camcorder to come on quickly from the power saving mode. 1. Touch the Menu ( ) Setting ( ) tab “Quick On STBY.” Quick On STBY 2.
system setting PC Software If you set PC Software to On, you can use the PC software built into the camcorder (Intellistudio) by connecting your camcorder to your PC using the camcorder’s USB cable. You can download the video and photo images stored on the camcorder to your PC’s hard disk and edit the videos and photos using the internal PC software. ) Setting ( ) tab “PC Software.” 1. Touch the Menu ( 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( ) or Return ( ) tab.
HDMI TV Out You can set the HDMI video output to match the TV you have connected the camcorder to. PRECHECK! Using the HDMI cable (not supplied), connect the camcorder to your TV. page 87 1. Touch the Menu ( ) Setting ( ) tab “HDMI TV Out.” HDMI TV Out 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Auto ) or Return ( ) tab. 480p 1/1 Submenu items • Auto: The video signals are output in the same format as the recorded file.
system setting TV Display You can enable or disable the On Screen Display (OSD) that appears on the TV screen when you have connected your camcorder to a TV. 1. Touch the Menu ( ) Setting ( ) tab “TV Display.” TV Display 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Off ) or Return ( ) tab. On 1/1 Submenu items • Off: The OSD (On Screen Display) menus are only shown on the LCD screen. • On: The OSD menus are shown on the LCD screen and the TV screen as well.
Language You can select a language in which to display the menu and messages. page 27 Language English 한국어 1/8 Français Deutsch Demo Demo mode automatically shows you the major functions that are included with your camcorder so that you may use them more easily. 1. Touch the Menu ( ) Setting ( ) tab “Demo.” Demo 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( Off ) or Return ( ) tab. On 1/1 Submenu items • Off: Disable the Demo function.
system setting Anynet+ (HDMI-CEC) This camcorder supports Anynet+. Anynet+ is an AV network system that lets you control all connected Samsung AV devices with an Anynet+ supported Samsung TV remote control. 1. Touch the Menu ( CEC).” ) Setting ( ) tab “Anynet+ (HDMI- Anynet+ (HDMI-CEC) Off 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( On ) or Return ( ) tab. 1/1 Submenu items • Off: Disables the function. • On: The Anynet+ function is enabled.
connecting to a TV CONNECTING TO A HIGH DEFINITION TV WITH HDMI You can view High Definition (HD) quality videos recorded in HD resolution on an HDTV using an HDMI connection. This camcorder supports HDMI output to deliver high-definition video transfer. PRECHECK! • Check if there is an HDMI input jack on your TV. • Use the AC power adaptor to power the camcorder when you attach it to a TV. • Select “HDMI TV Out.” page 83 HDTV Camcorder Signal flow Mini HDMI Cable Using a mini HDMI cable 1.
connecting to a TV Understanding the HDMI cable HDMI (High Definition Multimedia Interface) is a compact audio/video interface for transmitting uncompressed digital data. What is Anynet+ function? The Anynet+ function lets you control all devices that support the Anynet + function with the same remote. You can use the Anynet + function on the camcorder if the camcorder is connected by an HDMI cable to a TV that supports Anynet+. For more information, refer to the Anynet+ supported TV’s user manual.
CONNECTING TO A REGULAR TV You can view images recorded with your camcorder on a regular TV that supports standard definition. This camcorder supports the composite output for standard definition video transfer. PRECHECK! Use the AC power adaptor to power the camcorder when you connect it to a TV. Regular TV Camcorder Signal flow Audio/Video cable Connecting an Audio/Video cable for the composite output 1. Connect the camcorder to a TV with an Audio/Video cable.
connecting to a TV VIEWING ON A TV SCREEN Image appearance depends on the TV screen aspect ratio Recording ratio Appearance on Wide (16:9) TV Appearance on 4:3 TV Images recorded in a 16:9 ratio: • Video images • Photo images • Photo capture images Adjust the volume to a moderate level. If the volume is too high, the video may include noise. If “TV Display” is set to “Off,” the TV screen does not display the camcorder’s OSD (On Screen Display) menus.
dubbing videos DUBBING TO A VCR OR DVD/HDD RECORDER Videos recorded in this camcorder can be dubbed to a VCR or DVD/HDD recorders. PRECHECK! • Videos are dubbed to the other recording device via analog data transfer (composite connection). Use the supplied Audio/Video cable. • Use the AC power adaptor to power the camcorder when you dub to a VCR or DVD/HDD recorder. VCR or DVD/HDD recorder Camcorder Signal flow Audio/Video cable 1.
printing photos DIRECT PRINTING WITH A PICTBRIDGE PRINTER You can print photos directly by connecting your camcorder to a PictBridge printer (sold separately) using a USB cable. PRECHECK! • Insert the memory card. page 28 ) tab on the LCD screen to select the Photo play ( • Select the Play ( 1. Touch the Menu ( “PictBridge.” ) mode. page 40 ) Setting ( ) tab “USB Connect” USB Connect Mass Storage 2. Use a USB cable to connect your camcorder to the printer. 3. Turn your printer on.
To set the date/time imprint for Pictbridge printers 1. In the printer mode, touch the Menu ( ) tab. • The print options appear on the screen. 100-0014 14/17 01 2. Touch “Date/Time.” 3. Touch the desired submenu item. ) tab. 4. To exit the menu, touch the Exit ( ) or Return ( • The printer prints the selected date and time on the photos.
using with a Windows computer WHAT YOU CAN DO WITH A WINDOWS COMPUTER You can perform the following functions by connecting your camcorder to your Windows computer with a USB cable and using the Intelli-studio editing software built into your camcorder. Main functions Intelli-studio editing software’s main functions. - Playing back recorded videos or photos. - Editing recorded videos or photos. - Uploading the recorded videos and photos to YouTube, Flickr, Facebook, etc.
USING THE Intelli-studio PROGRAM Using the Intelli-studio program built into your camcorder, you can transfer video and photo files to your PC using a USB cable and edit them on your PC screen. Intelli-studio offers the most convenient way for you to manage your video and photo files. Step 1. Connecting the USB cable 1. Set “USB Connect: Mass Storage” and “PC Software: On.” • These are the default settings. 2. Connect the camcorder to a PC with the USB cable.
using with a Windows computer To disconnect the USB cable To disconnect the USB cable after completing the file transfer, you must follow these steps: 1. Click the “Safely Remove Hardware” icon on the taskbar. 2. Select “USB Mass Storage Device,” and then click “Stop.” 3. If the “Stop a Hardware device” window appears, click “OK.” 4. Disconnect the USB cable from the camcorder and PC. Use the provided USB cable.
Step 2. About the Intelli-studio main window When the Intelli-studio starts up, video and photo thumbnails are displayed in the main window. 1 2 3 4 5 6 ! 0 9 7 8 1. Menu items 2. Switches to Library of the computer and connected camcorder. 3. Switches to Photo Edit mode. 4. Switches to Movie Edit mode. 5. Switches to Share mode. 6. : Changes the size of thumbnails. : Displays all files (videos and photos). : Displays video files only. : Displays photo files only. : Displays voice files only. 7.
using with a Windows computer Step 3. Playing back videos or photos You can play back the recordings conveniently using the Intelli-studio application. 1. Run the Intelli-studio program. page 95 2. Click the desired folder to display your recordings. • Video or photo thumbnails appear on the screen, depending on the folder you selected. 3. Choose the video or photo that you want to play. • You can view the file information by moving the mouse over the file.
Step 5. Sharing the videos/photos online Share your contents with the world by uploading photos and videos directly to a web site with one click. 1. Select the videos or photos you want to share. 2. Click “Share” on the Intelli-studio browser. • The selected file appears in the sharing window. 3. Click the web site you would like to upload files to. • You can choose “YouTube,” “Fickr,” “Facebook,” or another web site you want to use for your uploading management. 4. Click “Upload” to start uploading.
using with a Windows computer USING AS A REMOVABLE STORAGE DEVICE You can copy video or photo files recorded by the camcorder to a Windows computer by connecting the camcorder to the computer using a USB cable. Viewing the contents of storage media 1. Set “USB Connect” to “Mass Storage.” page 82 2. Set “PC Software” to “Off.” page 82 3. Insert a memory card. page 28 4. Connect the camcorder to the PC with the USB cable.
Structure of folders and files on the storage media • The folder and file structure for storage media are below. • File naming follows DCF (Design rule for Camera File System) rules. Video file (H.264) ➀ HD-quality videos have an HDV_####.MP4 name format. SD-quality videos have a SDV_####.MP4 name format. The file number used in the file name automatically increases when you create a new video file. A new folder is created when the file number has reached 999~1,000.
troubleshooting Before contacting a Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. WARNING INDICATORS AND MESSAGES Problems may occur because of the following reasons. Check the information and take corrective action. Battery Message Low Battery Check authenticity of the battery. Icon - - Informs that... Action The battery is almost discharged. Replace with a charged battery or connect the AC power adaptor.
Message Informs that ... Action Not Formatted The memory card is not formatted in this camcorder. Format the memory card using this camcorder. Not Supported Format The memory card may have been formatted by another device and may still have existing images on it. Files cannot be played as the memory card format is not supported by the camcorder. Format the card using the camcorder or replace the card with a card formatted correctly.
troubleshooting Recording Message The number of video files is full. Cannot record video. Icon - Informs that ... Action Delete unnecessary files from the storage media. Back up files to your PC or another storage media and delete unneeded The number of video files that can files. be stored is 9,999. Change to another card which has enough free space. Set “File No.” to “Reset.” Format the storage media. The number of photo files is full. Cannot take a photo.
Editing videos Message Icon Informs that ... Action Cannot select different resolution. - The files you want to combine have different resolutions. You can not combine files that have different resolutions. Not enough free space in Card. - You cannot edit due to insufficient space on memory card. Edit after deleting unnecessary files. - Only two files can be combined. Combine two files first, and then combine the resulting file with an additional file.
troubleshooting USB Message Informs that... Action - A problem occurred when connecting the camcorder via USB to a printer. Check the USB cable. Try the connection procedure again. Switch “USB connect” function to “PictBridge.” Fail USB Connecting Change 'USB Connect' - A problem occurred when connecting the camcorder via USB to a PC. Check the USB cable. Try the connection procedure again. Switch “USB connect” function to “Mass Storage.
SYMPTOMS AND SOLUTIONS If these instructions do not solve your problem, contact your nearest Samsung authorized service center. Power Symptom Explanation/Solution The camcorder does not turn on. The battery may not be installed in your camcorder. Insert the battery into the camcorder. The inserted battery may be discharged. Charge the battery or replace it with a charged one. If you use the AC power adaptor, make sure it is properly connected to a wall outlet. The power turns off automatically.
troubleshooting Recording 108 Symptom Explanation/Solution Pressing the Recording start/stop button does not start recording. Press the MODE button to set the record mode. page 24 There is not enough free space to record on the storage media. Check if memory card is not inserted or write-protect tab is set to lock. The actual recording time is less than the estimated recording time. The estimated recording time may vary depending on content and features used.
Storage Media Symptom Explanation/Solution Memory card functions do not operate. Insert a memory card into your camcorder properly. page 28 If you use a memory card formatted on a computer, format it again directly on your camcorder. page 74 Image cannot be deleted. Release the lock on the write-protect tab of the memory card (SDHC/SD memory card), if any. page 29 You cannot delete a protected image. Release protection of the image using the Protect function.
troubleshooting Playback on your camcorder Symptom Explanation/Solution Playback (play/pause) function does not work. Image files recorded using another device may not play on your camcorder. Check memory card compatibility. page 29 Photo images stored on a storage media are not displayed in the actual size. Photo images recorded on other devices may not appear in their actual size. This is not an error. Playback is interrupted unexpectedly.
Connecting to a computer Symptom Explanation/Solution Your computer does not recognize your camcorder. Disconnect the USB cable from the computer and camcorder, restart the computer, and then connect the USB cable again correctly. Cannot play a video file properly on a PC. You need a video codec to play the file recorded on your camcorder. Install the software provided with your camcorder.
troubleshooting Overall operations Symptom Explanation/Solution The date and time are incorrect. Has the camcorder been left unused for a long period of time? The backup internal rechargeable battery may be discharged. page 26 Menu items that cannot be used at the same time Symptom Cannot use Because of the following settings Menu items are grayed out “Photo Resolution” “Cont. Shot” You cannot select grayed menu items in the current recording/playback mode.
maintenance & additional information MAINTENANCE The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years. Cautions when storing For safekeeping of the camcorder, turn off the camcorder. - Remove the battery and AC power adaptor. - Remove the memory card. Cleaning the camcorder Before cleaning, turn off the camcorder and remove the battery and AC power adaptor. To clean the exterior - Wipe gently with a soft dry cloth.
maintenance & additional information USING YOUR CAMCORDER ABROAD • Each country or region has its own electric and color systems. • Before using your camcorder abroad, check the following items. Power sources The AC adaptor provided lets you power, recharge, and use your camcorder in any country/ region that has AC power in the 100 V to 240 V, 50/60 Hz range. You may need a commercially available AC plug adaptor depending on the design of local wall outlets.
specifications Model name HMX-T10WN / HMX-T10BN / HMX-T10ON Focal length Filter diameter NTSC H.264 (MPEG-4.AVC) AAC (Advanced Audio Coding) 1/4”, 5.1M Pixel CMOS F1.8 ~ F2.5, 10x optical zoom, 100x digital zoom 2.75mm ~ 27.5mm Ø 34 LCD screen Size/dot number LCD screen method 2.7” Wide Touch LCD / 230k TFT LCD Connectors Composite output HDMI output Audio output USB output 1Vp-p (75 Ω terminated) C type connector -7.5 dBs (600 Ω terminated) mini USB-B type (USB2.
warranty SAMSUNG LIMITED WARRANTY SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at it’s option. All warranty repairs must be performed by a SEA authorized service center.
COUNTRY IN THE US CALL 1-800-SAMSUNG (726-7864) OR VISIT US ONLINE AT WRITE www.samsung.com Samsung Electronics America, Inc.
