Owner’s Instructions HPM5027 BN68-00327A-00(ENG)
Warning! Important Safety Instructions Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung product represents the latest in television technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
FCC Information • Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. • Unplug the Monitor from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time.
Important Warranty Information Regarding Television Format Viewing Table of Contents Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.The images displayed on them should primarily be in the wide screen 16:9 ratio format,or expanded to fill the screen if your model offers this feature,and constantly moving.
P L A S M A D I S P L A Y P A N E L Setup Your New Plasma Display Panel ....................................................10 Remote Control Buttons ................................................................12 Installing a rack on the PDP ..........................................................14 Turning the PDP On and Off ..........................................................
Your New Plasma Display Panel Front Panel Rear Panel Remote Control Signal Receiver Aim the remote control towards this spot on the Monitor. Speakers Œ External Speaker Out jacks ˆ S-Video Input jack Connect external speakers. Connect a S-Video signal from an S-VHS VCRs or DVD players. ´ RGB Input 1 jack (15pin) Connect to the video output jack on your PC. Swivel Stand This stand turns left, right up to 25 degrees respectively so that you can adjust the angle while viewing.
Remote Control Buttons ı VCR control buttons Remote Control Œ Power button Turns the PDP on and off. ´ Number buttons ˇ Display button Press to display information on the PDP screen. ¨ Menu button Displays the main on-screen menu. ˆ CH (Channel) and VOL (Volume) buttons Channel and Volume buttons are used for selecting menu item in menu mode. Ø Mute button Press to mute the PDP sound. ∏ P.
Installing a rack on the PDP 14 1 Install the rack on the swivel stand using screws. 2 Fasten the cover of the rack using screws as shown in figure. 3 Use the screws to fix the groove of the stand pole and the groove on top of the rack. 4 After installing the PDP on the stand pole, fasten the bottom using screws.
Turning the Monitor(PDP) On and Off Turning the Monitor(PDP) On and Off Displaying Status Information Press the Display button on the remote control. The PDP will display the Screen size, Resolution, Current time, and screen mode. Press the Power button on the remote control. The PDP will be turned on and you will be ready to use it’s features. You can also use the Power button on the front of the PDP. DISPLAY Main SUB P.MODE Scaling S.
P L A S M A D I S P L A Y P A N E L Connection (Connecting Speakers / Receiver) Connecting Speakers ....................................................................20 Connecting a VCR/Cable Box ......................................................21 Connecting a DVD/Set-Top Box ....................................................
Connecting Speakers Connecting a VCR/Cable Box Power Plug Audio Cable S-Video Cable Video Cable Speaker Audio Cable How to Connect 1 How to Connect Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP. • You can attach the Ferrite Cores(supplied) to the both jacks of the Speaker audio cable.
Connecting a DVD/Set-Top Box Power Plug Video (Y, Pb, Pr) Cable Audio Cable How to Connect 1 Connect a Video cable between the DVD/Set-Top Box (Y,Pb,Pr) Output jacks on the DVD/SetTop Box and the Component1/2 Video Input (Y,Pb,Pr) Input jacks on the PDP. • You can attach the Ferrite Cores (supplied) to the both jacks of the Video cable. Simply set the Ferrite Cores right under the jacks.
1 Customizing the Picture Using Automatic Picture Settings You can use the on-screen menus to change the Brightness, Contrast, Sharpness, Color, and Tint settings of your PDP. Your PDP has automatic picture settings that allow you to adjust the video display easily. Press the Menu button, then press the joystick to enter. VIDEO Select Contrast Brightness Sharpness Color Tint R 50 Move 2 Move the joystick left or right to select the “Custom”.
Viewing the Picture-in-Picture Selecting the PIP Screen 1 Selecting an External Signal You can use PIP to view a signal from an external source, such as a VCR. Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter. PIP Select ! 1 Off Quick way to access the PIP: Just press “PIP” on the remote control. Move Enter Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter.
Changing the Screen Size (When entering the Video mode) Changing the Location of the PIP Image When you press the Aspect button on the remote control, the PDP’s screen mode should appear in sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Stretch, 4:3. Note 1 Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter.
Freezing the Picture Still Press the Still button on the remote control to freeze a moving picture into a still one. Press again to cancel. P L A S M A D I S P L A Y P A N E L Sound Control Customizing the Sound ................................................................32 Using Automatic Sound Settings ....................................................33 Using the Surround ......................................................................
Customizing the Sound 1 Press the Menu button. Move the joystick up or down to select the “AUDIO”, then press the joystick to enter. SOUND Select Treble Bass Balance Surround Move 2 Move the joystick left or right to select the “Custom”. You will also see the items “Treble”, “Bass”, “Balance” and “Surround”. Custom 50 50 0 Adjust Select Treble Bass Balance Surround Move the joystick up or down to select the item you wish to change. Press the Menu button.
Using the Surround 1 Press the Menu button. Move the joystick up or down to select the “AUDIO”, then press the joystick to enter. SOUND Select Treble Bass Balance Surround Move 2 Move the joystick up or down to select the “Surround”, then move the joystick left or right to select the “Concert”, “Hall” or “Stadium”. 50 50 0 Off Adjust Exit SOUND Select Treble Bass Balance Surround Move 3 Custom Custom 50 50 0 Concert Adjust Exit Press the Menu button to exit.
Setting the Clock Setting the Sleep Timer This PDP has a built-in clock that will appear on screen when you press the Clock Display button on the remote control. Setting this clock also allows you to use it to automatically turn the PDP On or Off. 1 Press the Menu button. Move the joystick up or down to select the “TIME”, then press the joystick to enter.
Setting the Timers This PDP can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the PDP’s clock, as described previously. Setting the On/Off Timer 1 Press the Menu button. Move the joystick up or down to select the “TIME”, then press the joystick to enter.
P L A S M A D I S P L A Y P A N E L Connecting PC and Operation Connecting to a PC ......................................................................42 Adjusting the PC Screen ................................................................46 Changing the Position of the Image ................................................47 Changing the Size of the Image ....................................................48 Enlarge of the Image (Zoom)................................................
Connecting to a PC This PDP set is not compatible with Macintosh PC. Pin Configuration • 15Pin Signal Cable (based on protruded pin) Power Plug PC (15pin) Cable BNC Cable Audio Cable Setting up Your Monitor Plug and Play Our adoption of the new VESA Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion.
How to Set up Your Display Setting (Windows only) Notes: Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Notes: The plasma panel of this monitor is composed 1366 pixels & 768 lines. That is, the best resolution of this monitor is 1366 X 768.
Adjusting the PC Screen Changing the Position of the Image Adjusting the R.G.B After connecting the PDP to your PC, adjust the position of screen if it is not well-aligned. Preset: • Press the RGB button to select the PC mode. Preset: 1 • Press the RGB button to select the PC mode. 1 Press the Menu button, then press the joystick to enter.
Changing the Size of the Image Enlarge of the Image (Zoom) Preset: Preset: • Press the RGB button to select the PC mode. • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. ! 2 Quick way to access the Size: Just press “Scaling” on the remote control. Move the joystick up or down to select the “Scaling”, then move the joystick left or right to select the “Wide” or “4:3”.
Move Expanded Picture Picture Quality Adjustment Picture Automatic Adjustment On/Off Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. ! Quick way to access the Zoom: Just press “Zoom/Pan” on the remote control. Position Language Scaling Zoom/Panning Image Lock Miscellaneous Move 2 Move the joystick up or down to select the “Zoom/Panning”, then move the joystick left or right to enter.
Frequency Adjustment Fine Tuning (Phase) Preset: Preset: • Press the RGB button to select the PC mode. • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. Position Language Scaling Zoom/Panning Image Lock Miscellaneous Move 2 Move the joystick up or down to select the “Image Lock”, then move the joystick left or right to enter.
Information Power Saver (PC mode only) Preset: This monitor has a built-in power management system called Power Saver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. This power management system operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature. See the table below for details.
P L A S M A D I S P L A Y P A N E L Function Description Selecting a Menu Language . . Setting the Multi Control . . . . . Using the Key Lock . . . . . . . . Setting up Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 .59 .60 .
Selecting a Menu Language 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter. SETUP Language Multi Control Key Lock Move 2 Move the joystick left or right to select the appropriate language: English, Spanish, or French. Setting the Multi Control English 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter.
Using the Key Lock Setting up Your Remote Control When setting Key Lock ON, the buttons (SOURCE, MENU, VOLUME, SELECT, MUTE, POWER) on the front of the PDP don’t operate. But those buttons will operate when setting Key Lock OFF. 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter. SETUP Language Multi Control Key Lock English This PDP's remote control can operate almost any VCR, cable box, or DVD.
Remote Control Codes VCR Codes P L A S M A D I S P L A Y P A N E L Cable Box Codes Appendix Troubleshooting............................................................................64 Care and Maintenance ................................................................65 Specifications ..............................................................................
Care and Maintenance Troubleshooting Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money. With proper care, your PDP will give you many years of service. Please follow these guidelines to get the maximum performance from your PDP. Identifying Problems Problem Possible Solution • • • • Do not put the PDP near extremely hot, cold, humid or dusty places. Do not put the PDP near appliances that create magnetic fields.
Specifications Memo Exterior design and product specifications are subject to change without prior notice to improve the performance of this product. This PDP applies to Class B digital device. (Note: Class B system is for home use.) This PDP has been accepted as a device with proper electrowave and you can use this PDP not only in a residential area but other areas. Model Dimensions HPM5027 (Type No.
