User Manual

ıVCR control buttons
Controls VCR tape functions: Stop, Rewind,
Play/Pause, Fast Forward.
˜SET button
Use during setting up of this remote control, so that it
will work compatibly with other devices (VCR, cable
box, DVD, etc.)
¯Clock set button
Press to clock setting.
˘PIP control buttons
Source : Press to select one of the available signal
sources for the PIP window.
S.Sel : Press to select the Audio (PIP or Main).
Locate : Press to move the PIP window to any of the
screen.
¿PC control buttons
Auto Adjust
Scaling
Zoom/Pan
¸S.Mode button
Adjust the PDP sound by selecting one of the preset
factory settings (or select your personal, customized
sound settings.)
˛Sleep button
Press to select a preset time interval for automatic
shutoff.
S.Sel
13
Remote Control Buttons
ŒPower button
Turns the PDP on and off.
´Number buttons
ˇDisplay button
Press to display information on the PDP screen.
¨Menu button
Displays the main on-screen menu.
ˆCH (Channel) and VOL (Volume) buttons
Channel and Volume buttons are used for selecting
menu item in menu mode.
ØMute button
Press to mute the PDP sound.
∏P.Mode button
Adjust the PDP picture by selecting on of the preset fac-
tory settings (or select your personal, customized pic-
ture settings.)
”Aspect button
Press to change the screen size.
’Mode button
Selects a target device to be controlled by the samsung
remote control (ie., VCR, Cable, or DVD players).
˝Clock Display button
Press to display clock on the PDP screen.
ÔSource button
Press to display all of the available video sources
(ie., Video, S-Video, Component1, Component2,
PC ).
Joystick button
Use to highlight on-screen menu items and change
menu values.
ÒStill button
Press to pause the current screen.
ÚPIP button
Activates picture in picture.
ÆSource selection buttons
Press to directly select Video, S-Video, Component1,
Component2 or PC.
12
Remote Control
Flip the cover open
in the arrow direction.
Installing the Batteries in Your Remote Control
1
Slide the back cover
to open the battery
compartment of the
remote control
3
Slide the cover back into
place.
2
Install two AAA size batter-
ies. Make sure to match the
“+” and “-” ends of the bat-
teries with the diagram
inside the compartment.
Remote Control Operation Range.
You can use your remote control within a distance of 23 feet and an angle of 30 degrees
from the left and right sides of the remote control receiver of the monitor.