Quick Guide

10
Using P2P Service
This function is available only for products that support P2P. To find products that support P2P, see
‘Products supporting each feature (Page 4)’ of the Product Specification Manual.
When using a P2P service, you can easily access and use with Wisenet mobile.
1
Click <Enable P2P> to test the connection to see if the current recorder can be connected remotely.
The product is displayed on the list.
2
If the connection is successful, search for WiseNet mobile on your smartphone and install and run it.
■
You can scan the QR code on the recorder by selecting Add device> QR code.
3
If you scan the QR code, the device ID shown in the recorder is automatically reflected as the mobile viewer ID.
You can use the mobile viewer immediately by entering the ID/password of the recorder.
HRX-1632
NNXMC8438636XL1E111A
4
From now on, when you run the WiseNet mobile application saved to your smartphone, you can easily monitor
with your smartphone as you are automatically connected to the recorder.
HRX-1632
■
The P2P service period expires in 3 years. If you want to extend it after expiration, contact your vendor.