DIGITAL VIDEO RECORDER Quick Guide HRX-1632/HRX-835/HRX-435/HRX-434
English Package Contents Features The product records video and audio from network cameras to a hard disk, and enables playback from the hard disk. It also provides remote monitoring environment for video and audio over the network using a remote computer. ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Provides new UI 2.
Installing the HDD HRX-435 REC HDD ALARM NETWORK BACKUP POWER DIGITAL VIDEO RECORDER Recorder Mouse ■ If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD manually in the set before use. ■ If you wish to replace or add an HDD, contact your dealer or our customer service first. HRX-1632/HRX-835 Quick Guide ■ The images below are based on the HRX-1632 model.
5 Connect the SATA/power cable of the HDD to the connector on the motherboard. ■ Refer to the figure below for the location/connector number of the HDD. 4 3 4 3 2 2 HRX-434 6 After making sure that there is no problem with the connection terminal and wiring inside the product, close the cover and fix it with screws. 1 1 1 Loosen the screws on the back and slide the cover back to remove it. 2 Connect the SATA/power cable of the HDD to the connector on the motherboard.
Installation Wizard Setup 3 As shown below, proceed through each step of the . Install Wizard can only be accessed at factory reset. If you do not want to proceed, click . 1 ■ You can set the installation wizard on the recorder and web viewer. Refer to the User Manual for instructions on how to set up the installation wizard on the web viewer.
5 Date & Time Setup 7 Set the date, time, time zone, and DST and then click . Camera Register Registers the searched network cameras. 7-1 Select a camera to register from the searched camera list and click . 7-2 Select a camera to register from the list and click . 7-3 After completing camera register, click . ※ T he time zone setup might differ depending on the region that the product is released.
Explore Screen Configuration Record Setup The recorder screen consists of the following. You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event. You can check frame rates and data transfer amount of Full Frame and Key Frame recordings for each channel, and set the transfer limit for recordings. ■ The screen may be configured differently depending on the menu selected by the user. Setup > Record > Record setup ● ● ● ● No.
Set up and Run the Layout 2-1 Search The layout set on the live screen can also be used for time search and can be searched and played according to the channel order and channel combination set by the user. ■ 1 For more information on how to set each step, refer to the ‘User Manual’. Live channel layout setup Select the layout of your choice from the channel groups you created in Live. Please select a date to search. Select the channel of your choice from the selected channel group. Add a layout.
3 Using Product Information Export recorded video You can check the product information/manual/firmware information/FAQ/HDD compatibility list on the homepage or mobile web of your smartphone. http://hanwha-security.com Click < > at the bottom of the screen. Select a layout. Select a channel. Set the time, device, and format for export. HRX-1632 Click the button to see if you can export. Click the button to proceed with the export. HRX-1632 9 http://hanwha-security.
Using P2P Service 4 From now on, when you run the WiseNet mobile application saved to your smartphone, you can easily monitor with your smartphone as you are automatically connected to the recorder. This function is available only for products that support P2P. To find products that support P2P, see ‘Products supporting each feature (Page 4)’ of the Product Specification Manual. When using a P2P service, you can easily access and use with Wisenet mobile.
Connecting to a Network Using a Router Checking the recorder connection from the PC If you want to add 1-3 PCs and recorders in an environment using xDSL/Cable modem, you can use the router with only one Internet line. Enter the IP set in the recorder menu in the local PC address bar. Once you log in by entering your user name and password, the recorder’s web viewer screen appears. This guide is an installation guide for network beginners.
Accessing using DDNS address in the dynamic IP environment Connect using DDNS address In the dynamic IP environment such as xDSL/Cable modem, the router's WAN IP can be changed, so we provide DDNS (Dynamic Domain Name Server) service so that you can always access the recorder with only the DDNS address even in the dynamic IP environment. 1 Select DDNS site on the recorder setup menu and enter the product ID. 2 Connect to ddns.hanwha-security.
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
