HT-BD7200 2.1CH Blu-ray Home Theater System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-BD7200_XAA_0317-1.
Key features of your new Blu-ray Home Theater PLAYER FEATURES Playback of many disc types, plus an FM Tuner The HT-BD7200 allows you to play various discs, including BD-ROM, DVD-VIDEO, DVD-RW/-R(V mode), CD, MP3-CD, DivX and CD-R/RW, with a sophisticated FM tuner, all in a single player. Full HD Audio Decoding Support (DD,DD+,DOLBY TRUE-HD,DTS,DTS-HD HRA, DTS-HD MA Essential) Please refer to www.DOLBY.COM and DTS.COM for more detail.
Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no compromise on video quality. Furthermore, a Blu-ray Disc has the same familiar size and look as a DVD. * The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below.
Key features of your new Blu-ray Home Theater What’s included Check for the supplied accessories below. Video Cable (AH39-40001V) iPod Dock (AH96-00051A) FM Antenna (AH42-00017A) Speaker Wire (3 EA) User's Manual (AH68-02196R) Toroidal Ferrite Core (3301-000144) Remote Control (AH59-02195A) / Batteries (AAA size) (4301-000116) HT-BD7200_XAA_0317-1.
EnG Safety information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within Triangle Is a warning sign alerting you of dangerous voltage Inside the product CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE.
PreCaUtiOnS 2.7 inch 3.9 inch 3.9 inch 3.9 inch ensure that the aC power supply in your house complies with the identification sticker located on the back of your player. install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot.
EnG Contents key features of your new Blu-ray Home Theater 2 3 4 Player Features Blu-ray Disc Features What’s Included safety information 5 6 Safety Warnings Precautions getting started 10 11 Before Reading the User’s Manual Disc Type and Characteristics description 14 15 Front Panel Rear Panel remote control 16 18 Tour of the Remote Control Setting the Remote Control connections 20 22 24 26 Connecting the Speakers Connecting the Video Out to Your TV Connecting an iPod Connecting Audio fro
Contents audio setup 37 Setting up the Speaker Options display setup 40 42 Setting up the Display Options Setting up the Video Display/Output Options HDMI setup 44 Setting up the HDMI Setup Options parental setup 47 Setting up the Parental Lock network setup 49 Setting up the Network Setup Options BD data management 54 System Device Management system upgrade 55 57 57 57 Firmware Upgrade System Information Firmware Upgrade Notification DivX (R) Registration watching a movie 58 59 60 61
68 68 68 69 71 Buttons on the Remote Control Used for Audio CD(CD-DA)/ MP3 Disc Playback Repeat Audio CD(CD-DA) & MP3 Playing an Audio CD(CD-DA)/MP3 Using the Internet Radio Feature Provided by Pandora Viewing a Picture 73 73 73 73 74 74 Viewing a Picture Slide Show/Speed Rotate Zoom Go To Photo List using the usb function 75 Playing Media Files Using the USB Host Feature radio 77 77 Listening to Radio Presetting Stations using bluetooth 78 78 What is Bluetooth? To connect the Blu-ray Home Th
Getting started Before Reading the User’s Manual Make sure to check the following terms before reading the user manual. Icons that will be used in manual Icon h g f Z C V Term BD-ROM This involves a function available on a BD-ROM. BD-RE This involves a function available on the BD-RE. BD-R This involves a function available on the BD-R. DVD-VIDEO DVD-RW DVD-R Audio CD A G This involves a function available on DVD-Video or DVD-RW/-R discs that have been recorded and finalized in Video Mode.
EnG Disc Type and Characteristics Disc types that can be played Disc Types Disc Logo BD-ROM BD-RE/BD-R Recorded content AUDIO + VIDEO AUDIO + VIDEO AUDIO-CD AUDIO Max.
Getting started Discs that cannot be played ~ ~ ~ ~ HD DVD Disc DVD-RAM 3.9 GB DVD-R Disc for Authoring. DVD-RW(VR mode) M` ~ DVD-ROM/PD/MV-Disc, etc ~ CVD/CD-ROM/CDV/CD-G/CD-I/LD ~ 3 1/2 inch MD (mini disc) Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either “No disc.” or “Please check the regional code of the disc.” will be displayed.
❖ BD-RE/BD-R Blu-ray Disc Rewritable/Blu-ray Disc Recordable. BD-RE/BD-R is the ideal format for making backups, or recording personal video. EnG Disc Types ❖ BD-ROM Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM may contain any form of data, most BD-ROM discs will contain movies in High Definition format, for playback on Blu-ray Home Theaters. This unit can play back pre-recorded commercial BD-ROM discs.
Description FRONT PANEL 1 3 6 10 11 POWER BUTTON FUNCTION BUTTON TUNING DOWN & SKIP ( ) BUTTON Turns the Blu-ray Home Theater on and off. The mode switches as follows : BD/DVD ➞ D.IN ➞ AUX ➞ BT AUDIO ➞ FM. Goes back to the previous title/chapter/track. Tunes down the FM frequency band. STOP BUTTON Stops disc playback. PLAY/PAUSE BUTTON Plays a disc or pauses playback. TUNING UP & SKIP( ) BUTTON Goes to the next title/chapter/track. Volume Control BUTTON Volume adjustment.
1 3 6 ENG REAR PANEL ● DESCRIPTION 11 10 2.1 CHANNEL SPEAKER OUTPUT CONNECTORS Connect the front, subwoofer speakers. FM 75Ω COAXIAL JACK Connect the FM antenna. iPod JACK Connect the iPod dock connector here. EXTERNAL DIGITAL OPTICAL INPUT JACK Use this to connect external equipment capable of digital output. HDMI OUT JACK Use the HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture.
Remote control Tour of the Remote Control 21 1 2 3 22 23 24 4 5 6 7 8 9 10 11 25 26 27 28 29 12 13 14 15 16 17 18 19 20 30 31 32 33 34 35 36 16 HT-BD7200_XAA_0317-1.
POWER button 19 MO/ST button 2 BD RECEIVER button 20 DISC MENU button 3 TV button 21 EJECT button 4 Number (0~9) buttons 22 DIMMER button 5 AUDIO button 6 STEP button 7 Tuning Preset/CD Skip buttons PLAY button STOP button SEARCH buttons 8 BD button TUNER button AUX button 24 SOURCE button 25 SUBTITLE button 26 PAUSE button 9 VOLUME button 27 MUTE button 10 V-SOUND button 28 TUNING/CH button 11 MENU button 29 RETURN button 12 Cursor/Enter button 30 EXIT button 13
Remote control SETTING THE REMOTE CONTROL You can control certain functions of your TV with this remote control. When operating a TV with the remote control 1. Press the TV button to set the remote to TV mode. 2. Press the POWER button to turn on the TV. 3. While holding down the POWER button, enter the code corresponding to your brand of TV. ~ If there is more than one code listed for your TV in the able, enter one at a time to determine which code works.
No. No. Brand 1 Admiral (M.Wards) 56, 57, 58 44 MTC 18 2 A Mark 01, 15 45 NEC 18, 19, 20, 40, 59, 60 3 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 46 Nikei 03 12, 13, 14 47 Onking 03 Code Brand EnG TV Brand Code List Code AOC 01, 18, 40, 48 48 Onwa 03 5 Bell & Howell (M.
Connections This section involves various methods of connecting the Blu-ray Home Theater to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Position of the Blu-ray Home Theater Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
ENG Connecting The Speakers 1. Press down the terminal tab on the back of the speaker. . Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab. 3. Connect the connecting plugs to the back of the Blu-ray Home Theater by matching the colors of the speaker plugs to the speaker jacks. Red ● CONNECTIONS Front Speaker (R) Black Front Speaker (L) Subwoofer Speaker ` Do not let children play with or near the speakers.
Connections CONNECTING THE VIDEO OUT TO YOUR TV Choose one of the three methods for connecting to a TV. METHOD1 METHOD3 (supplied) METHOD2 METHOD 1 : HDMI (BEST) Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the Blu-ray Home Theater to the HDMI IN jack on your TV. M` Depending on your TV, certain HDMI output resolutions may not work. ` If an HDMI cable is connected from the player to a TV, the Blu-ray Home Theater’s output is set to HDMI automatically within 10 seconds.
EnG ● connections ~ HDMI connection description HDMI connector - Supports video and digital audio data. - HDMI outputs only a pure digital signal to the TV. - If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen. ~ Why does Samsung use HDMI? Analog TVs require an analog video/audio signal. However, when playing a BD/DVD, the data transmitted to a TV is digital.
Connections CONNECTING AN iPod You can enjoy music, video files from an iPod through the main unit. For iPod operation with this Blu-ray home theater, see pages 25 and 80 ~ 82. (supplied) 1. Connect the iPod Dock to the iPod Jack on the rear side of the main unit. . Place the iPod in the dock. ~ “iPod Connected” message appears on the TV screen. M` You must have the VIDEO output connected to your TV to view iPod video (See page 25).
EnG iPod models that can be used with the HT-BD7200 ● connections M` “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. ` “Works with iPhone” means that an electronic accessory has been designed to connect specifically to an iPhone and has been certified by the developer to meet Apple performance standards.
Connections CONNECTING AUDIO FROM EXTERNAL COMPONENTS OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1. Connect the Digital Input (OPTICAL) on the main unit to the Digital Output of the external digital component. . Press the FUNCTION button on the main unit to select D.IN input. ~ The mode switches as follows : BD/DVD ➞ D.IN ➞ AUX ➞ BT AUDIO ➞ FM.
ENG AUX : Connecting an External Analog Component Analog signal components such as a VCR. 1. Connect AUX IN (Audio) on the main unit to the Audio Out of the external analog component. ~ Be sure to match connector colors. ● CONNECTIONS . Press the AUX button on the remote control to select AUX input. ~ You can also use the FUNCTION button on the main unit. The mode switches as follows : BD/DVD ➞ D.IN ➞ AUX ➞ BT AUDIO ➞ FM.
Connections CONNECTING TO THE NETWORK to access network service or upgrade the current firmware, you must make one of the following connections. By connecting to a network, you can access the BD-LiVe, netflix, Pandora services and software upgrades from Samsung’s update server. Case 1 : Connecting a Direct LAN Cable to your Modem 1. Using the Direct LAN Cable (UTP cable, not supplied), connect the LAN terminal of the Blu-ray Disc Player to the LAN terminal of your modem.
ENG Case 2 : Connecting to a Wireless IP sharer You can connect to network with a Wireless IP sharer. See page 50 for Wireless Network Setup. ● CONNECTIONS Modem Port Wireless IP sharer Modem Cable M` Wireless LAN Adapter (not supplied) This unit is compatible with only Samsung Wireless LAN Adapter. (not supplied) (Model name: WIS09ABGN). - The Samsung Wireless LAN Adapter is sold separately. - Contact a Samsung Electronics agent or service center for purchasing.
Connections CONNECTING THE FM ANTENNA 1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack. . Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. FM Antenna (supplied) M` This unit does not receive AM broadcasts. COOLING FAN The cooling fan supplies cool air to the unit to prevent overheating. Please observe the following cautions for your safety. ~ Make sure the unit is well-ventilated.
ENG Basic functions of your Blu-ray Home Theater This section introduces basic playback functions and playback by disc type. BEFORE PLAYING ● BASIC FUNCTIONS ~ Turn on your TV and set it to the correct Video Input (the input the Blu-ray Home Theater is connected to). ~ If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
Basic functions of your Blu-ray Home Theater On-Screen Menu NavigatioN Video System Information System Setup Music Time Zone Photo Clock Set Netflix Language Setup Audio Subtitle Pandora Disc Menu Disclaimer Setup Power On/Off sound BD Data Management System Update Menu Dynamic Compression Audio Setup Display Setup TV Aspect Movie Frame (24 Fs) Resolution Progressive Mode AV Sync Test Tone Speaker Distance Sound Edit Still Mode Screen Message Anynet + (HDMI-CEC) HDMI Setup Network Setup
ENG SETTINg THE SOUND Setting the Power On / Off Melody Sound a Melody sound can be set so it is heard each time you turn the player on or off. 1. With the unit in Stop mode, press the MENU button. System Information Pandora Time Zone Disclaimer Clock Set 3. Press the $% buttons to select System Setup, then press the ENTER or + button. Language Setup Power On/Off sound : On On Off BD Data Management Audio Setup DivX(R) Registration Display Setup System Update 4.
Basic functions of your Blu-ray Home Theater SLOW MOTION PLAy/STEP MOTION PLAy Slow Motion Play hgfZCV In pause or step mode, press the SLOW button on the remote control for Slow Motion play. ~ If you press the SLOW button, * 1/8 * 1/4 * 1/2 ~ To return to normal speed playback, press the PLAY ( ) button. M` This ( ) icon indicates an invalid button press. ` No sound is heard during slow mode. ` Slow motion operates only in the forward direction.
eng System setup Setting the CloCK Choose your time zone 1. With the unit in Stop mode, press the Menu button. Pandora Disclaimer dVd Setup 3. Press the ▲▼ buttons to select System Setup, then press the enteR or ► button. 4. Press the ▲▼ buttons to select time Zone, then press the enteR or ► button.
Language setup SETTING UP THE LANGUAGE OPTIONS Once you set the audio, subtitle, disc menu and player menu language options, they will be applied automatically every time you watch a movie. M If you want to choose a different audio and subtitle language while playing a disc, you can also use the disc menu to make the selection. Pandora 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. Disclaimer dVd Setup System Setup ◄ Language Setup ◄ 1.
eng Audio setup Setting up the SpeaKeR optionS dynamic Compression Pandora Disclaimer dVd Setup System Setup Language Setup Audio Setup ◄ Dynamic Compression : On On Off : 50msec Display Setup aV Sync HDMI Setup test tone Network Setup ► Speaker distance Parental Setup Sound edit ● audio Setup This is only active when a Dolby Digital signal is detected.
Audio setup Setting up the SpeaKeR optionS Setting the Speaker distance If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, subwoofer speakers. 1. With the unit in Stop mode, press the Menu button. Pandora 2. Press the ▲▼ buttons to select Setup, then press the enteR or ► button. Disclaimer dVd Setup 3. Press the ▲▼ buttons to select audio Setup, then press the enteR or ► button.
4. Press the ▲▼ buttons to select Sound edit, then press the enteR or ► button. 5. Press the ▲▼ buttons to select the desired Speaker, then press the ◄► button to adjust the settings. dVd Setup Speaker distance Language Setup Audio Setup : 50msec test tone System Setup ◄ Sound edit ► Display Setup HDMI Setup Network Setup Parental Setup ● audio Setup 6. When done, use the ▲▼◄► buttons to select Save, then press the enteR button.
Display setup SETTING UP THE DISPLAY OPTIONS This function allows you to setup the TV screen settings. This function depends on the disc or TV type. It may not work with some discs or TVs. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. System Setup Pandora Language Setup Disclaimer dVd Setup Audio Setup ◄ Display Setup ► HDMI Setup 3. Press the ▲▼ buttons to select Display Setup, then press the ENTER or ► button.
Movies are usually filmed at 24 frames per second. Some Blu-ray Discs have the capability of playing back at this frame rate. Setting the Movie Frame (24Fs) feature to ON allows you to adjust the Blu-ray Home Theater's HDMI output to 24 frames per second for improved picture quality.
Display setup Setting up the Video display/output Options Resolution according to the output mode • Blu-ray Disc playback HDMI Component (HDMI&Comp. connected / Comp. connected only) Video 1080p, Movie Frame(24Fs) off 1080p@60F 1080i 480i 1080p/1080i, Movie Frame (24Fs) on 1080p@24F 480i / 1080i 480i 1080i, Movie Frame (24Fs) off 1080i 1080i 480i 720p 720p 720p 480i 480p 480p 480p 480i 480i 480p 480i 480i HDMI Component (HDMI&Comp. connected / Comp.
The Progressive Mode helps to improve picture quality when viewing 480i resolution DVD discs. • Auto : Select this to have the player automatically set the best picture for the DVD you're watching. • Video : Select this for the best picture from Concert or TV show DVDs.
HDMI setup Setting up the hdMi Setup optionS 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. 3. Press the ▲▼ buttons to select HDMI Setup, then press the ENTER or ► button. HDMI setup menu will be displayed. Language Setup Pandora Audio Setup Disclaimer dVd Setup Display Setup ◄ HDMI Setup ◄ 1. With the unit in Stop mode, press the MENU button. Network Setup Parental Setup 4. Press the ▲▼ buttons to select the desired display option, then press the ENTER or ► button.
● hdMi Setup M eng TV Anynet+ Menu When you press the Anynet+ button on your Samsung TV's remote n control, the following On-Screen Display (OSD) will be shown.
HDMI setup Setting up the hdMi Setup optionS Picture Mode This function enables you to adjust video quality when you are connected to a TV via HDMI. • Dynamic : Choose this setting to increase Sharpness. • Normal : Choose this setting for most viewing applications. • Movie : This is the best setting for watching movies.
eng Parental setup SETTING UP THE PARENTAL LOCK The Parental Lock function works in conjunction with Blu-ray Disc/DVDs that have been assigned a rating which helps you control the types of Blu-ray Disc/DVDs that your family watches. There are up to 8 rating levels on a disc. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. 3. Press the ▲▼ buttons to select Parental Setup, then press the ENTER or ► button.
Parental setup SETTING UP THE PARENTAL LOCK If you forgot your password 1. Remove the disc. 2. Press and hold the STOP () button on the front panel for 5 seconds or more. • All settings will revert to the factory settings. M When the factory default settings are restored, all the user data stored in the BD data will be deleted. Setting the Rating Level 1. Press the ▲▼ buttons to select Rating Level, then press the ENTER or ► button. 2.
eng Network setup SETTING UP THE NETWORK SETUP OPTIONS To obtain information on the proper settings, check the network settings on your computer or contact your Internet provider. To set the network of your Blu-ray Home Theater, follow the steps below. 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. Pandora Display Setup Disclaimer dVd Setup ● netWoRK Setup 1. With the unit in Stop mode/No Disc mode, press the MENU button.
Network setup SETTING UP THE NETWORK SETUP OPTIONS 6. Press the ▲▼ buttons to select a desired item, then press the ENTER button. • If DHCP is set to Off and, DNS to Manual, enter your IP Address, Subnet Mask, Gateway and Primary DNS settings (Secondary DNS is optional). Pandora Disclaimer dVd Setup Audio Setup Display Setup Cable Network HDMI Setup DHCP Network Setup IP Address ParentalMask Setup Subnet ◄ Network Selection : Cable : Off Cable Network : 000 . 000 . 000 . 000 Wireless Network : 255 .
dVd M Audio Setup Pandora Display Setup Wireless Network Disclaimer HDMI Setup Access Point Network Setup DHCP Parental Setup IP Address Setup NTP Server : 000 . 000 . 000 . 000 Gateway : 000 . 000 . 000 . 000 BD-LIVE Internet : Allow (Vaild Only) Connection Cancel Save Select Return Display Setup Wireless Network HDMI Setup Access Point Network Setup DHCP Parental Setup IP Address Setup ◄ Network Selection : Cable : Not Selected Cable Network : On Wireless Network : 000 . 000 . 000 .
Network setup SETTING UP THE NETWORK SETUP OPTIONS • If DHCP is set to On and, DNS to Manual, enter your DNS Server. Audio Setup Pandora Display Setup Wireless Network Disclaimer dVd HDMI Setup Access Point Network Setup DHCP Parental Setup IP Address Setup ◄ Network Selection : Cable : Not Selected Cable Network : On Wireless Network : 000 . 000 . 000 . 000 ► Proxy : 255 . 255 . 255 . 000 Subnet Mask NTP Server : 000 . 000 . 000 .
To setup, follow steps 1~3 on page 49. Pandora Disclaimer dVd Setup Audio Setup Cable Network Display Setup Wireless Network HDMI Setup Network Setup Proxy ◄ Parental Setup NTP Server : Off On Off Network Connection Test ► BD-LIVE Internet : Allow (Vaild Only) Connection Network Connection Test Use this menu to check whether your network connection is working or not. To setup, follow steps 1~3 on page 49. 4.
BD data management BD Data (stored in external USB flash memory) is Blu-ray Disc content such as trailers and other special features downloaded from the BD-LIVE service or Blu-ray Discs. * You must have a minimum 1GB USB Memory device inserted in one of the USB slots in order to download content from BD-LIVE. SYSTEM DEVICE MANAGEMENT You can manage user data stored in BD data. 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button.
EnG System upgrade Samsung may offer upgrades to your Blu-ray Home Theater's firmware in the future. To upgrade this firmware you must : 1. Go to samsung.com and refer to the ‘SUPPORT’ page to download the latest firmware. You can use a CD-R or a USB flash drive to perform the firmware upgrade. For more information, see “Upgrade Manual” at the website mentioned above. or ● SyStEm uPGRaDE 2. Connect the network (see pages 28~29) and follow the steps below. FIRMWARE UPGRADE 1.
System upgrade FiRmwaRE uPGRaDE 6. To perform the system upgrade, press the _ + buttons to select Start and then press the ENTER button. Pandora Disclaimer DvD Power On/Off sound BD Data Menagement System Update DivX(R) Registration : On Update System Setup 1 2 _ 3 System 4 Setup + Language Setup The new update data was found. Audio Setup Current Version : XXXXX Display New SetupVersion : XXXXX HDMI Setup Network Setup Start Parental Setup Cancel 7. The system update gets started.
EnG SYSTEM INFORMATION When the firmware upgrade is done, check the firmware details by following the steps below. 1. With the unit in Stop mode/No Disc mode, press the MENU button. DvD Setup System Setup Language Setup Audio Setup 3. Press the ▲▼ buttons to select System Setup, then press the ENTER or + button.
Watching a movie uSinG thE DiSPlay Function hZCV 1. During playback, press the INFO button on the remote control. • If the Blu-ray Disc has the PIP feature, press the inFo button in the PIP section to display PIP-related information. 2. Press the ▲▼ buttons to select the desired item. DvD-video : 001/006 chapter : 001/016 Playing time : 00:04:17 audio : EnG multi ch Subtitle : off angle : 01/01 Select change 3.
hZ using the Disc menu 1. During playback, press the DISC MENU button on the remote control. Play moviE lanGuaGES ▼ 3 M PREviEwS 4 5 6 7 8 9 10 11 12 13 14 15 Depending on the disc, the Disc Menu may not be available. Z using the title menu ● watchinG a moviE 2. Press the ▲▼_ + buttons to make the desired selection, then press the + or ENTER button. • The Disc menu setup items may vary from disc to disc. ScEnE SElEctionS EnG uSinG thE DiSc mEnu & PoPuP/titlE mEnu 1.
Watching a movie REPEat Play Repeat the current chapter or title. Repeat playback hgfZCV 1. During playback, press the REPEAT button on the remote control. Repeat screen appears. Repeat off 2. Press the ▲▼ buttons to select Chapter or Title. • Blu-ray Disc/DVD repeats play by chapter or title. 3. To return to normal play, press the REPEAT button again, then press the ▲▼ buttons to select Off. M Depending on the disc, the Repeat function may not be available. using the a-B Repeat function 1.
EnG hgfZ SElEctinG thE auDio lanGuaGE You can select a desired audio language quickly and easily with the AUDIO button. using the auDio button audio 1/4 EnG Dolby Digital multi ch ● watchinG a moviE 1. Press the AUDIO button during playback. The Audio changes when the button is pressed repeatedly. • The audio languages are represented by abbreviations. 2. To remove the Audio bar, press the CANCEL or RETURN button. using the inFo button 1. During playback, press the INFO button on the remote control.
Watching a movie SElEctinG thE SuBtitlE lanGuaGE using the inFo button 1. During playback, press the INFO button on the remote control. 2. Press the ▲▼ buttons to select Subtitle. 3. Press the _ + buttons on the remote control to select the desired subtitle language. M Depending on the Blu-ray Disc / DVD, you may be able to change the desired subtitle in the Disc Menu. Press the DISC MENU button.
EnG PiP (PictuRE in PictuRE) SEttinGS The PIP feature allows you to view additional content (such as commentaries) in a small screen window while the movie is playing. h using the PiP button 1. If the current Blu-ray Disc features the PIP function, you can use the PiP button to turn PiP on or off. ● watchinG a moviE 2. Each time you press the PiP button, you can toggle between PiP on and PiP off.
Watching a movie uSinG thE inStant StREaminG FEatuRE PRoviDED By nEtFliX This Blu-ray Home Theater supports the Netflix streaming service which enables you to enjoy various movies via network connection. Before enjoying this feature, you must perform the LAN connection (see page 28). 1. With the unit in Stop mode/No Disc mode, press the mEnu button. 2. Press the ▲▼ buttons to select Netflix, then press the ENTER or + button. 3.
EnG 5. To add a movie to the Instant Queue list of this Blu-ray Home Theater, select the "Add to Instant" button on the Netflix "Watch Instantly" web page using your PC. 6. Movies you added to the Instant Queue from the web are listed. Press the ENTER button of the remote control and select a movie to display the next screen. • To add the movie in Instant Queue list of this Blu-ray Home Theater, you can select "Add to Instant" button on "Watch Instantly" page of Netflix web site using your PC.
Watching a movie DivX PlayBack The functions discussed on this page apply to DivX disc playback only. D Skip Forward/Back During playback, press the [, ] button. • Goes to the next file whenever you press the ] button, if there are over 2 files on the disc. • Goes to the previous file whenever you press the [ button, if there are over 2 files on the disc. Fast Playback D During playback, press the (, ) button. To play back the disc at a faster speed, press the ( or ) button during playback.
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time. EnG DivX(Digital internet video express) MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality video and audio. 1. Supported Formats This product only supports the following media formats.
Listening to music Buttons on the Remote Control used for Audio CD (CD-DA)/ MP3 disc playback 1. PAUSE button : Pauses playback. 0 STOP 2. SKIP ( ) button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist. 3. PLAY button : Plays the currently selected track. PLAY 4. ▲▼ buttons : Selects a track(song) in the Music List or Playlist. ME NU RE TU RN ENTER IN EX IT FO A B C D 5.
2. To move to the Music List, press the STOP or RETURN button. The Music List screen is displayed on your TV. 3. Press the ▲▼ buttons to select the track you want to play, then press the ENTER button. ► TRACK 001 1/18 00:02:24 / 00:05:57 CD A Play Mode Video CD cD _ Music TRACK 001 00:04:08 + Photo TRACK 002 00:03:41 Netflix TRACK 003 00:03:17 Pandora TRACK 004 00:03:36 Disclaimer TRACK 005 00:03:47 Setup TRACK 006 00:03:50 _ TRACK 007 B Playlist 00:03:54 ● liStEninG to muSic 1.
Listening to music AF Playlist You can create a playlist with up to 99 tracks. 1. Insert an Audio CD(CD-DA) or an MP3 Disc into the disc tray. • For an Audio CD, the first track will be played automatically. • For an MP3 disc, press the ▲▼ buttons to select music, then press the EntER button.
EnG uSinG thE intERnEt RaDio FEatuRE PRoviDED By PanDoRa Pandora provides music personalized to your taste. 1. With the unit in Stop mode/No Disc mode, press the mEnu button. PANDORA ® internet radio 3. To run Pandora, you need to input the activation code at page with your PC. After inputting the activation code, you may have to create a new account if you don't have one yet. If you already have an account, you can use the existing account. ● liStEninG to muSic 2.
Listening to music uSinG thE intERnEt RaDio FEatuRE PRoviDED By PanDoRa 7. Press the GREEN(B) button while the highlight is on the station list to delete the selected station. Pandora Station Title 1 Song Title 1 Station Title 2 Station Title 3 Station Title 4 ! Are you sure you want to delete this station? Abba Radio Delete A Create Station 8. You can edit your song list by using color buttons of the remote control while the highlight is on the song list.
EnG Viewing a picture viEwinG a PictuRE 1. Insert a JPEG disc into the Disc Slot . • The Menu screen is displayed. Music .. Photo _ • The Photo List is displayed. 3. Press the ▲▼ buttons to select a picture. 176.JPG 08 JUL 2000 127 KB + Netflix BEACH.JPG 17 JUL 2000 27 KB Pandora KE.JPG 10 JUL 2000 194 KB Disclaimer KE2.JPG 10 JUL 2000 _ Setup • To see the next page, press the SKIP ( ) button. • To see the previous page, press the SKIP ( ) button. 191 KB MBHONG.
Viewing a picture Zoom To setup, follow steps 1 to 3 in "Viewing a Picture" on page 73. _____1_.JPG # 4. Press the EntER button. 03/07 CD 5. Press the yEllow(c) button. A y90° C Zoom B u90° Slide Show D Speed 6. Use the yEllow(c) or EntER button to zoom the image in/out. - to move the area Press the ▲▼_ + buttons to the area you want to enlarge. x2 Move C Zoom - to stop the Zoom Press the yEllow(c) button. Go to Photo liSt To setup, follow steps 1 to 3 in "Viewing a Picture" on page 73. 4.
EnG Using the USB function PlayinG mEDia FilES uSinG thE uSB hoSt FEatuRE You can enjoy media files such as pictures and music saved on an MP3 player, USB memory stick or digital camera. ● uSinG thE uSB Function 1. Connect the USB device to the USB port on the side of the unit. 2. uSB connected appears on the display screen and then disappears. 3. USB icon is displayed on the Setup Menu.
Using the USB function USB Host Specification USB Host Specification Non-compliance Operational Limitations • Supports USB 1.1 or USB 2.0 compliant devices. • Supports devices connected using the USB A type cable. • Supports UMS (USB Mass Storage Device) V1.0 compliant devices. • Supports the device of which the connected drive is formatted in the FAT(FAT, FAT16, FAT32) file system. • Does not support a device that requires installing a separate driver on the PC (Windows).
EnG Radio liStEninG to RaDio 1. Press the tunER button to select the FM band. ● RaDio 2. Tune in to the desired station. • Automatic Tuning 1 : When the SkiP ( ) button is pressed, a preset broadcast station is selected. • Automatic Tuning 2 : Press and hold the tuninG/ch ( ) button to automatically search for active broadcasting stations. • Manual Tuning : Briefly press the tuninG/ch ( ) button to increase or decrease the frequency incrementally. main unit 1.
Using BLUETOOTH You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires! What is Bluetooth? Bluetooth is a new technology that enables Bluetooth-compliant devices to easily interconnect with each other using a short wireless connection. • A Bluetooth device may cause a noise or malfunction, depending on usage. • When a part of the body is in contact with the receiving/transmitting system of the Bluetooth device or the Blu-ray Home Theater.
EnG To disconnect the Bluetooth device from the Blu-ray Home Theater You can disconnect the Blu-ray Home Theater from the Bluetooth device. (refer to Bluetooth deivice's user's manual) • The Blu-ray Home Theater will be disconnected. • When the Blu-ray Home Theater is disconnected from the Bluetooth device, the Blu-ray Home Theater will display "READY" on the front display. Press the FUNCTION button on the front panel of the Blu-ray Home Theater to switch from “BT AUDIO” to another mode.
Using an iPod You can enjoy playback of your iPod using the supplied remote control. liStEninG to muSic You can play music files stored in the iPod player by connecting it to the Blu-ray Home Theater. 1. Connect the iPod dock connector to the iPod jack on the Blu-ray Home Theater. 2. Place the iPod in the Dock. • Your iPod is automatically turned on. • “iPod Connected” message appears on the TV screen. 3. Press the MENU button on the remote control. 4.
EnG To move to the Music List and select a track: 1. Press the MENU or STOP button. • It stops playing and returns to the music list. 2. Press the , buttons to select the file you want to play and press the ENTER button. • Press the RETURN or button to return to the parent menu. iPod Music categories Now Playing : Plays a recently played file or moves to the playback screen of the current file. Artists : To play by artist.
Using an iPod watchinG a moviE You can play video files stored in the iPod player by connecting it to the Blu-ray Home Theater. 1. Connect the iPod dock connector to the iPod jack on the Blu-ray Home Theater. 2. In the iPod screen, move to videos > Settings and set the tv out option to on. 3. Place the iPod in the Dock. • “iPod Connected” message appears on the TV screen. 4. Press the , buttons on the remote control to select iPod mode. 5.
EnG Convenient function SlEEP timER Function You can set the time that the Blu-ray Home Theater will shut itself off. Press the SlEEP button. • Each time the button is pressed, the preset time changes as follows : SLP 10 ➞ 20 ➞ 30 ➞ 60 ➞ 90 ➞ 120 ➞ 150 ➞ OFF. To confirm the sleep timer setting, press the SlEEP button. • The remaining time before the Blu-ray Home Theater will shut itself off is displayed. • Pressing the button again changes the sleep time from what you have set earlier.
Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG. SYMPTOM Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. The iPod fails to connect.
Check/Remedy EnG SYMPTOM • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. • The main unit is not working. (Example: The power goes out or a strange noise is heard.) • The Blu-ray Home Theater is not working normally. • Turn off the power and hold the STOP ( ) button on the main unit for longer than 5 seconds.
Appendix Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Handling discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Disc Storage Do not keep in direct sunlight M Keep in a cool ventilated area Keep in a clean Protection jacket. Store vertically.
General Frequency response AC 120V, 60Hz 100 W 7.0 Ibs 18.1 (W) x 7.6 (D) x 4.3 (H) inches +41°F to +95°F 10 % to 75 % Reading Speed : 4.917m/sec Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 20 min. 1 channel : 1.0 Vp-p (75 Ω load) Blu-ray Disc : 480i DVD : 480i Y : 1.0 Vp-p (75 Ω load) Pr : 0.70 Vp-p (75 Ω load) Pb : 0.
❖ ❖ ❖ ❖ This product uses parts of the software from the Independent JPEG Group. This product uses parts of the software owned by the Freetype Project (www.freetype.org). This product uses some software programs which are distributed under the GPL/LGPL license. This Product uses some software programs which are distributed under the OpenSSL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@samsung.com.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
GNU Lesser General Public License (LGPL) Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machinereadable “work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
Copyright (C) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
Warranty LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region North America Latin America Europe CIS Asia Pacific Country HT-BD7200_XAA_0317-3.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (7267864) www.samsung.com/us Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 Code No. AH68-02196R HT-BD7200_XAA_0317-3.
