Manual

USB Host Specification
USB Host Specification
o SupportsUSB1.1orUSB2.0 compliantdevices.
Supports devices connected using the USB
A type cable.
o Supports UMS (USB Mass Storage Device)
V1.0 compliant devices.
Supports FAT (FAT,FA]-16, FA732)file
system formatting.
Nonocompliance
CB! (Control/Bulk/Interrupt)is not supported.
Digital Cameras that use PTP protocol or
require additional program installation when
connected to a PC are not supported.
A device using the NTFS file system is not
supported. (Only the FAT 16/32 (File Allocation
Table 16/32) file system is supported.)
Does not operate with Janus enabled MTP
(Media Transfer Protocol) devices.
USB Devices that can be used with the
product
o Does not support a device that requires installing
a separate driver on the PC (Windows). 1.
Does not support connection to a USB hub. 2.
o A USB device that is connected using a USB 3.
extension cable may not be recognized.
4,
Operational Limitations
o If the connected device has multiple drives
(or partitions) installed, only one drive
(or partition) can be connected.
o A device supporting USB 1.1 alone may
cause a difference in the picture quality,
depending on the device.
Supported file Formats
JPG MP3
JPG.JPEG .MP3
- 80-384kbps
640x480
- 44.1 kHz
USBStorage Device
MP3 Player
DigitalCamera
USBcard Reader: One slot USBcard readerand
MultPslotUSB card reader.
The USBcard reader may not be supported,
depending on the manufacturer.
Ifyou installmultiplememory devicesinto a
multi-card reader,you may experience
problems.
NOTE
_ The external HDD device isnot
supported.
Check for the supplied accessories below.
iiiiiiiiiiiiii
iiiiiiiiiiiiii
iiiiiiiiiiiiii
iiiiiiiiiiiiii
English