Manual

OpticalCable
(notsupplied)
Red
White
AudioCable
(notsupplied)
Iftheexternalanalog
componenthasonlyone
AudioOutconnecteither
leftorright,
iiiiiiiiiiiiii
iiiiiiiiiiiiii
OPTICAL AUX
OPTICAL: Connecting an External Digital Component ........................................................................................................
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.
2. Press the FUNCTION button to select D,IN input.
The mode switches as follows : BD/DVD --, D. IN --, AUX --, HDMI. IN1 --, HDMI. IN2 --, FM
_-_ NOTE
_ To see video from your Cable Box/Satellite receiver, you must connect it's video output directly to a TV.
_s This system supports Digitalsampling frequencies of 32 kHz of higher from external digital components.
_s Thissystemsupports only DTSand Ddby Digitalaudio, MPEGaudio(bitstream)is not supported.
AUX • Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN (Audio) on the product to the Audio Out of the external analog component.
Be sure to match connector colors.
2. Press the FUNCTION button to select AUX input.
, The mode switches as follows : BD/DVD --, D. IN --, AUX --, HDMI. IN1 --, HDMI. IN2 --, FM
_L_ NOTE
_ You connecttheVideoOutputjackofyourVCR totheTV,and connecttheAudioOutputjacksofthe
VCR tothisproduct
English