Manual

Setup
1. Turn on your TV after connecting the product,
5'Vhenthe product is connected to T',/for the first
time, the product will turn on automatically and
display the InitialSettings screen,)
2. Press the A _' buttons to selectthe desired
language, then pressthe ENTER button,
3. Press the ENTER button to Start,
4. Press the A T buttons to selectthe desiredTV
aspect ratio, then pressthe ENTER button,
(See page 33)
The MusbaURoom CaRbrationscreenappears.
5. Plugthe ASC microphone into the ASC IN jack
on the product, (Seepage 37)
6. Press the ENTER button to Start,
settingtheMusicalRoomCalibrationfunction
takesabout3 minutes.
30 English
7, Pressthe 4 _ buttons to select the desired
Network Settings : Wired, Wireless or PBC
(WPS),and then press the ENTER button,
Ifyou do not know your Network Settings,
press the BLUE (D) button on your remote
instead to skip Network Settings here,finish the
InitialSettings, and go to the Home menu, If
you selected a Network Setting, go to pages
39-42 for more information about the Network
settings. When done, go to Step 8,
8. Press the OK button,
The home menu appears. (For more information
about home menu, please see page 31)
Home Menu
NOTE
*_ When the product isconnected to TV for the
first time, the product will turn on automatically,
This is not a malfunction,
_ The home menu will not appear if you do not
configure the initial settings, with the exception
below,
_s If you press the BLUE(B}button during the
Musical Room Calibration or Network setup,
you can access the home menu even if the
network setup is not completed yet,
_s When you return to the home menu, the full
screen mode is cancelled automatically.