HT-C6950W 7.1CH Blu-ray Home Cinema System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Downloaded From TheatreSystem-Manual.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous CAUTION : TO PREVENT ELECTRIC voltage” inside the product that presents SHOCK, MATCH WIDE BLADE OF PLUG a risk of electric shock or personal injury. TO WIDE SLOT, FULLY INSERT.
Precautions • Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. • Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). • Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered. • Do not stack anything on top of the product. • Before moving the product, ensure the Disc Insert Hole is empty.
Safety Information Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Holding discs • Do not touch the playback side of the disc. • Hold the disc by the edges so that fingerprints will not get on the surface. • Do not stick paper or tape on the disc. Disc Storage • Do not keep in direct sunlight • Keep in a cool ventilated area • Keep in a clean Protection jacket.
Contents Safety Information Safety Warnings Precautions Cautions on Handling and Storing Discs Licence Copyright Getting Started 7 8 12 13 13 14 15 Icons that will be used in manual Disc Types and Characteristics Accessories Description Front Panel Rear Panel Remote control CONNECTIONS 17 22 23 24 25 26 Connecting the Speakers Connecting External Devices/your TV via HDMI Connecting the FM Antenna Connecting the Video Out to your TV Connecting Audio from External Components Connecting to the Network
Contents Setup 43 43 43 43 43 44 44 44 General Background Front Display Power On/Off Sound Light Effect Support Software Upgrade Contact Samsung Basic Functions 45 45 46 47 47 48 50 52 53 54 55 Playing a Disc Using the Disc menu / Title menu / Popup menu Using the Search and Skip Functions Slow Motion Play/Step Motion Play Repeat Playback Using the TOOLS button Listening to Music Sound Mode Playing back a Picture Playing back a USB Storage Listening to Radio Network Services 56 56 56 BD-LIVE™ Softwa
01 Getting Started Getting Started Icons that will be used in manual Make sure to check the following terms before reading the user manual. Term Logo Icon h � Z BD-ROM BD-RE/-R DVD-VIDEO Definition This involves a function available on a BD-ROM. This involves a function available on a BD-RE/-R disc recorded in the BD-RE format. This involves a function available on a DVD-VIDEO.
Getting Started Disc Types and Characteristics Logos of Discs that can be played Blu-ray Disc Compatibility Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual. If you encounter compatibility problems, please contact the SAMSUNG customer care centre.
01 Disc Types Both the product and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. BD-ROM Disc Type Blu-ray DVD-VIDEO Region Code Area a North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia. b Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand. c India, China, Russia, Central and South Asia. 1 The U.S., U.S.
Getting Started Audio CD DivX(Digital Video Express) • An audio disc on which 44.1kHz PCM Audio is recorded. • This product can play back CD-DA format audio CD-R and CD-RW discs. • The product may not be able to play some CD-R or CD-RW discs due to the condition of the recording. DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time.
01 Video File Support File Extension Container Video Codec Divx 3.11/4.x/5.1/6.0 *.avi XviD AVI MP4v3 H.264 BP/MP/HP Audio Codec Resolution MP3 AC3 DTS WMA PCM 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 VC-1 AP *.mkv DivX 5.1/6.0 MKV XviD MP3 AC3 DTS 1920x1080 1920x1080 1920x1080 H.264 BP/MP/HP *.wmv WMV (wmv9) *.mp4 *.mpg *.mpeg VC-1 AP MP4 (mp4v) MP4 H.264 BP/MP/HP MPEG1 PS 1920x1080 WMA VC-1 SM MPEG2 H.
Getting Started USB Host Specification USB Host Specification • Supports USB 1.1 or USB 2.0 compliant devices. • Supports devices connected using the USB A type cable. • Supports UMS (USB Mass Storage Device) V1.0 compliant devices. • Supports FAT(FAT, FAT16, FAT32) file system formatting. Non-compliance • Does not support a device that requires installing a separate driver on the PC (Windows). • Does not support connection to a USB hub.
01 Front Panel 1 2 3 4 5 6 7 8 1 2 3 4 DISC TRAY Insert disc here. DISPLAY Displays the playing status, time, etc. REMOTE CONTROL SENSOR Detects signals from the remote control. OPEN/CLOSE BUTTON Opens and closes the disc tray. 5 FUNCTION BUTTON 6 TUNING DOWN & SKIP BUTTON 7 8 STOP BUTTON Stops disc playback. PLAY/PAUSE BUTTON Plays a disc or pauses playback. 9 TUNING UP & SKIP BUTTON Goes to the next title/chapter/track. Tunes up the FM frequency band.
Getting Started Rear Panel 1 2 3 4 5 6 DIGITAL AUDIO IN HDMI IN 7 8 9 10 FM ANT LAN WIRELESS 11 12 COMPONENT OUT HDMI OUT OPTICAL SPEAKER IMPEDANCE : 3 WIRELESS LAN VIDEO OUT 1 SPEAKER OUTPUT CONNECTORS Connect the front, centre, surround back, subwoofer speakers. 2 COOLING FAN The cooling fan supplies cool air to the product to prevent overheating and always revolves when the power is on. 3 FM 75Ω COAXIAL JACK Connect the FM antenna.
01 Getting Started Remote control Tour of the Remote Control POWER FUNCTION TV SOURCE BD RECEIVER/TV SLEEP Turn the product on and off. When the button is pressed, the button color is toggled. (Orange colour : BD RECEIVER Combo, Green colour : TV) Press numeric buttons to operate options. 1 2 3 4 5 6 7 8 FULL SCREEN Allows you to repeat a title, chapter, track or disc. Press to search backwards or forwards. Press to pause a disc. Press to stop/play a disc. Cut off the sound temporarily.
Getting Started Installing batteries in the Remote Control * Battery size: AAA ✎ NOTE Make sure to match the “+” and “–” ends of TV Brand Code List Brand Code Brand Code Admiral (M.Wards) 56, 57, 58 Mitsubishi/ MGA 18, 40, 59, 60, 75 A Mark 01, 15 MTC 18 NEC 18, 19, 20, 40, 59, 60 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Nikei 03 Onking 03 AOC 01, 18, 40, 48 Bell & Howell (M.
02 Connections Connections This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers 6.6~9.8 feet (2~3m) BD SR SL SBL SBR Position of the product Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.
Connections Connecting the Speakers Speaker Components Assembled Speakers (L) (R) SCREW (Large): 4EA SCREW (Small): 16EA STAND FRONT CENTRE CENTRE SPEAKER STAND BASE (L) (R) FRONT/SURROUND SPEAKER (L) (R) SUBWOOFER SURROUND SURROUND BACK SPEAKER CABLE SURROUND BACK SPEAKER SUBWOOFER SWA-5000 TX Card Wireless Receiver Module ✎ NOTE Refer to page 19 to install the Speakers on the Tallboy Stand. 1 DownloadedEnglish From TheatreSystem-Manual.
02 Connections Installing the Speakers on the Tallboy Stand 1. Turn the Stand Base upside-down and connect it to the Stand. 1 Stand Base Stand 2. Insert four small screws clockwise into the four holes marked using a screwdriver as shown in the illustration. 2 3. Connect the upper Speaker to the assembled Stand. 3 Speaker Stand 4. Insert another large screw clockwise into the hole on the rear of the speaker using a screwdriver. Downloaded From TheatreSystem-Manual.
Connections Connecting the Speakers Connecting The Speakers 1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab. 3. Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks. 4. With the product turned off, insert the TX card into the TX Card Connection(WIRELESS) on the back of the product.
02 Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct. Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker. not hang the subwoofer on the wall through the duct (hole).
Connections Connecting external Devices/your tv via HDmI HDMI is a standard digital interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set top box and more. HDMI removes any loss of signal from analogue conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source.
02 1. Connect an HDMI cable from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital devices. 2. Press the FUNCTION button to select HDMI. IN1 or HDMI. IN2 input. The mode switches as follows : BD/DVD ; D. IN ; AUX ; HDMI. IN1 ; HDMI. IN2 ; FM HDMI Auto Detection Function The product's video output will automatically change to HDMI mode when connecting an HDMI cable before power is on. For possible HDMI resolutions, see page 32.
Connections Connecting the video out to your tv Red Blue Green METHOD 1 LAN COMPONENT OUT OUT METHOD 2 Yellow WIRELESS LAN VIDEO OUT METHOD 1 : Component Video (BETTER QUALITY) If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (Pr, Pb and Y) Jacks on the back of the product to the Component Video Input Jacks on your TV.
02 Connections Connecting audio from external Components LAN DIGITAL AUDIO IN HDMI IN COMPONENT OUT HDMI OUT OPTICAL WIRELESS LAN Optical Cable (not supplied) Set-Top Box OPTICAL Red VIDEO OUT White Audio Cable (not supplied) If the external analogue component has only one Audio Out, connect either left or right. VCR AUX OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1.
Connections Connecting to the network By connecting to a network, you can access the BD-LIVE and Software upgrades from Samsung’s update server. We recommend using an AP (Access Point) or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Cable Network 1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN terminal of your modem. 2.
02 You can connect to the network with a Wireless IP sharer. 1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the Wireless LAN Adapter on the rear panel of the product. - This unit is compatible with the supplied Wireless LAN Adapter. - You can also use the wireless network by connecting the Wireless LAN Adapter Gender to the Wireless LAN Adapter. 2. Set the network options.
Setup Before Starting (Initial Settings) 1. Turn on your TV after connecting the product. (When the product is connected to TV for the first time, product will turn on automatically and the Initial Settings screen will be displayed.) 7. Press the ◀▶ buttons to the select the desired Network Settings: Wired, Wireless or PBC (WPS), then press the ENTER button. (See pages 39~42) The Network Test will start and Initial Settings will be completed.
03 again in order to make changes, press the FUNCTION TV SOURCE STOP (@)POWER button on the front panel of the product for more than 5 seconds with no disc inserted.BD RECEIVER/TV SLEEP Use the HDMI cable to connect the product to an Anynet+(HDMI-CEC)-compliant Samsung TV. If the TV uses supported by the 2 1 a language 3 product, that language will be set to a preferred language 4 5automatically. 6 However, the Anynet+(HDMI-CEC) feature should be 7 set to On8in both TV 9 and the product.
Setup Display You can configure various display options such as the TV Aspect, Resolution, 3D, etc. 3D Select whether to play a Blu-ray Disc with 3D contents in 3D Mode. Settings Display 3D 3D Audio System 3D Mode : Auto NetworkTV Screen Size : 55 inch Language Security General > Move s Select r Return Support Still Mode : Auto TV Screen Size Lets you enter the actual screen size of your TV so that the product can adjust the image according to the screen size and display an optimal 3D image.
03 BD Wise (Samsung Products only) Depending on the type of television you have, you may want to adjust the screen setting. BD Wise is Samsung's latest inter-connectivity feature. • 16:9 Normal Certain movies(4:3 source) will be displayed in 4:3 Pillarbox (black bars on sides of picture) if 16:9 normal is selected. • 16:9 Wide You can view the full 16:9 picture on your widescreen TV.
Setup Resolution according to the output mode • Blu-ray Disc playback HDMI / connected Output Setup HDMI / not connected HDMI Mode Component/VIDEO Mode Component Mode VIDEO Mode Auto Optimal Resolution 576i(480i) - - 1080p, Movie Frame(24Fs) off 1080p@60F 576i(480i) - - 1080p/1080i, Movie Frame(24Fs) on 1080p@24F 576i(480i) - - 1080i, Movie Frame(24Fs) off 1080i 576i(480i) 1080i 576i(480i) 720p 720p 576i(480i) 720p 576i(480i) 576p(480p) 576p(480p) 576i(480i) 576p(480p) 5
03 Setup HDMI Format Progressive Mode You can optimize the colour setting from the HDMI output. Select a connected device Type. Set to improve picture quality when viewing DVDs. • TV : Select if connected to a TV via HDMI. • Monitor : Select if connected to a Monitor via HDMI. ✎ NOTE A TV or monitor has to be connected to the product before you select this option.
Setup Distance audio Speaker Setting DPL llz • Off : Select when you place the Surround Back speakers as shown. • On: Provide a more realistic 3D surround sound with vertical surround system. Settings Display Audio System Network Language Security General Support If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, centre, surround, surround back and subwoofer speakers.
03 By setting the Musical Auto Calibration (MAC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1-channel sound field optimized for your environment. ASC microphone ✎ NOTE Setup Musical Auto Calibration Setting the Musical Auto Calibration function takes about 3 minutes.
Setup ✎ NOTE Digital Output Set Digital output depending on the connected receiver. (For more details, please refer to the digital output selection) • PCM • Bistream(Re-encode) • Bistream(Audiophile) Be sure to select the correct Digital Output or you will hear no sound or a loud noise. If the HDMI device (Receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio signal outputs as PCM. Secondary and Effect audio will not be heard with regular DVDs.
03 You can listen at low volumes but still hear dialog clearly. This is only active when a Dolby Digital signal is detected. • Auto : The Dynamic Range Control will be set automatically based on the information provided by the Dolby TrueHD Soundtrack. • Off : Turn Dynamic Range Control off. • On : Choose to listen to a movie at a lower volume without losing clarity of dialog. AV Sync Video may look slower than the audio when the product is connected to a digital TV.
Setup Description of Device(Storage) Information on the Product • Total Size : Total size of the Device (Storage). • Available Size : Available size of the Device (Storage). DivX(R) Registration View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content. ✎ NOTE Settings In the external memory mode, disc playback will be stopped if you disconnect the USB device in the middle of the playback. Only those USB devices formatted in FAT file system (DOS 8.
03 Network Setting To begin setting up the network connection for your product, follow these steps: 1. In the Home menu, press the ◀▶ buttons to select the Settings, and then press the ENTER button. Internet Protocol Setup : Auto IP Address : 0 0 0 0 Subnet Mask : 0 0 0 0 Gateway : 0 0 0 0 DNS : Auto 0 0 4. Press the ▲▼ buttons to select Network Type, and then press the ENTER button. 5. Press the ▲▼ buttons to select Wired or Wireless, and then press the ENTER button. 6.
Setup 4. Use the number buttons on your remote to enter numbers. 5. When done with each field, use the ▶ button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. 4. After the network connection is set up, press the RETURN button to exit the Network Setting screen. Setting up the Wireless network Connection - auto network Search 10. Run a Network Test to ensure the product has connected to your network (See page 42).
03 In the list of networks, press the ▲▼ buttons to select a network, and then press the ENTER button. 10. When done, press the BLUE (D) button on your remote, and then press the ENTER button. 6. If the PIN/Security pop-up appears, go to Step 7. If the Network Connecting Screen appears, go to Step 11. 7. Press the ▲▼ buttons to select PIN or Security. For most home networks, you would select Security (for Security Key). 11.
Setup 5. When done with each field, use the ▶ button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. 6. Enter the IP Address, Subnet Mask, and Gateway values. 7. Press the ▼ to go to DNS. 8. Press the ▼ button to go to the first DNS entry field. Enter the numbers as above. 9. When done, press the ▲ button to return to Access Point Selection. Select the network, and then press the ENTER button. 10.
03 General When you operate this menu for the first time, password setup screen will be displayed. Enter the desired 4-digit password using the number buttons. (Default password is set to 0000.) Background Change the background theme of the menu screen. Parental Rating Settings This function works in conjunction with Blu-ray Disc/DVDs that have been assigned a rating, which helps you control the types of Blu-ray Disc/ DVDs that your family watches. Select the rating level you want to set.
Setup Support Software Upgrade This menu allows you to upgrade software for performance improvements or additional services. You can check the current software version, upgrade by internet and set the Auto upgrade notification. If the product is properly connected to the network by cable or wirelessly, the product will automatically connect to our website each time it is turned on and download update files if any valid upgrade exists.
POWER Disc Structure Basic Functions Playing a Disc 04 Basic Functions DVD RECEIVER/TV The contents of disc are usually divided as below. Playback • Blu-ray Disc, DVD-VIDEO 1. Press the OPEN/CLOSE ( ) button to open the disc tray. 2. Place a disc gently into the tray with the disc’s label facing up. 3. Press the PLAY (+) button or OPEN/ CLOSE ( ) button to close the disc tray.
Basic Functions POWER FUNCTION TV SOURCE Using the Title Menu UsingSLEEPthe Search and Skip Functions DVD RECEIVER/TV VOL DVD RECEIVER/TV TUNING /CH SLEEP SFE MODE DVD RECEIVER/TV TITLE MENU 3 4 POPUP 76 5 6 Searching for a Desired Scene 8 9 9 0 INFO FUNCTION TV SOURCE REPEAT EXIT Depending on the disc, the menu items may TUNER differ and this menu may not be available. MEMORY MO/ST 2 Cif there3D The Title Menu will onlyA1be displayed B are at least two titlesINTERNET on the @ disc.
04 Repeat Basic Functions Slow motion Play/Step motion Play Off Slow Motion Play h�Z�� • In pause mode, press the SEARCH ()) button. If you press the SEARCH ()) button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 • To return to normal speed playback, press the PLAY (+ ) button. 3. To return to normal play, press the REPEAT button again. FUNCTION POWER TV SOURCE DVD RECEIVER/TV SLEEP 4. Press the ▲▼ buttons to select Off, the press the ENTER button.
MUTE VOL Basic Functions DISC MENU MENU using the tooLS button During playback, you can operate disc menu by pressing the TOOLS button.
04 � • You must have some experience with video extraction and editing in order to use this feature properly. • To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi • Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.
Basic Functions FUNCTION TV SOURCE POWER Listening to music SLEEP BD RECEIVER/TV 1 2 BD RECEIVER/TV 8 3 o� FUNCTION TV SOURCE Buttons on the Remote Control 4 5 6 used for Music Playback POWER 7 FULL SCREEN @ ! 1 0 2 4 5 ENTER button : Plays and pauses the selected track. 8 ◀▶ buttons : Fast Play. (except for Audio CD (CD-DA)) 9 STOP button : Stops a track. 0 SKIP(]) button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist.
2 3 4 5 6 Repeat an Audio CD 7 (CD-DA)/MP3 8 9 1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc tray. • For an Audio CD (CD-DA), the first track will be played automatically. • For an MP3 disc, press the ◀▶ buttons to select Music, then press the ENTER button. 1. During the Playlist playback, press 0 the REPEAT button. Audio CD (CD-DA)/MP3 Screen Elements 1 2 05:57 04:07 TRACK 004 00:08 / 05:57 s Pause 5 ) Track Audio CD (CD-DA) Current track is repeated.
SFE MODE DISC MENU Basic Functions 5. Press the ENTER button to play the selected tracks. The selected track will automatically play. 1/1 Playlist + TRACK 001 05:57 TRACK 002 04:27 TRACK 003 04:07 00:08 / 05:57 CD s Pause Tools r Return TOOLS INFO Sound mode DSP(Digital Signal Processor) Function RETURN EXIT This will regulate and stabilize the volume level POWER TUNER against a drastic volume change when changing MEMORY MO/ST A transition.
TOOLS INFO MUTE T VOL EXIT B C @ You can select the desired Dolby INTERNET Pro Logic II audio mode. Press the MUSIC MOVIE DISC MENU MO/ST Using the TOOLS button D DSP During the slide show playback, you can use various function by pressing the TOOLS button. PL II button. When listening to music, you can experience sound effects as if you are listening to the actual performance.
Basic Functions ✎ NOTE Playing back a uSB Storage F You can use the USB connection to play multimedia files (MP3, JPEG, DivX, etc) downloaded from the USB storage device. 1. Move to the home menu. 2. In Stop mode, connect the USB storage device to the USB port on the front panel of the product. The message “Do you want to access the device?” will be displayed. 3. Press the ◀▶ button to select Yes, then press the ENTER button. 4. Press the RED(A) button.
POPUP 7 8 TOOLS 0 INFO 9 REPEAT 04 Using buttons on the Remote Control 1. Press the FUNCTION button to select FM. 2. Tune in to the desired station. • Automatic Tuning 1 : When the [ ] button is pressed, a preset broadcast station is selected. • Automatic Tuning 2 : Press and hold the TUNING/CH ( ) button to automatically search for active broadcasting stations. • Manual Tuning : Press the TUNING/CH ( ) button to increase or decrease the frequency incrementally. Using buttons on the product 1.
Network Services By connecting to a network, you can access the BD-LIVE and Software upgrades from Samsung’s update server. Check the following instructions before using any network service. 1. Connect the product to the network. (see pages 26~27) 2. Configure the network settings. (see pages 39~42) ✎ NOTE Update will be completed when the product turns off after restarting. Press the POWER button to turn on the updated product for your use.
05 Network Services 7. Click the Set Change State icon ( ) and move to the home menu on the product. Application Program at a Glance 6 1 8. To select a device, use the RED(A) or BLUE(D) button to select a file to play. (For playing back Video, Music or Photos files, see pages 45~53.
Other information Troubleshooting Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the product, disconnect the power cord and contact the nearest authorized dealer or Samsung Electronics Service Centre. Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. Playback does not start.
06 Check/Remedy Aspect ratio cannot be changed. • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. • The product is not working. (Example: The power goes out or a strange noise is heard.) • Turn off the power, and press and hold the STOP ( ) button on the product for longer than 5 seconds. • The Product is not working normally.
Other information Symptom Check/Remedy PC Share Manager function I can see folders shared through the PC Share Manager, but I cannot see the files. • Since it shows only files corresponding to the Image, Music, and Movie categories, files that do not correspond to these categories may not be displayed. AllShare function Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded.
06 Other information Specifications General FM Tuner Weight 3.8 kg Dimensions 430 (W) x 61 (H) x 330 (D) mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % to 75 % Signal/noise ratio 70 dB Usable sensitivity 10 dB Total harmonic distortion 0.5 % BD (Blu-ray Disc) Reading Speed : 4.917m/sec DVD (Digital Versatile Disc) Disc CD : 12cm (COMPACT DISC) CD : 8cm (COMPACT DISC) Composite Video Reading Speed : 3.49 ~ 4.06 m/sec. Approx.
Other information 7.1ch speaker system Speaker system Speaker Front/Surround Surround back Centre Impedance 3Ω 3Ω 3Ω 3Ω Frequency range 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 40Hz ~ 160Hz Output sound pressure level 87dB/W/M 87dB/W/M 87dB/W/M 88dB/W/M Rated input 165W 165W 170W 170W Maximum input 330W 330W 340W 340W Dimensions (W x H x D) Front/Surround : 90 x 1300 x 119 mm (Stand base : 250 x 250 mm) Surround back : 90 x 141.5 x 68.5 mm Centre : 360 x 74.5 x 68.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Area Contact Centre ` North America Canada 1-800-SAMSUNG (726-7864) Mexico 01-800-SAMSUNG (726-7864) U.S.
Code No. AH68-02279W Downloaded From TheatreSystem-Manual.
