HT-D4200 2.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-D4200_ELS_1223.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous CAUTION : TO PREVENT ELECTRIC voltage” inside the product that presents SHOCK, MATCH WIDE BLADE OF PLUG a risk of electric shock or personal injury. TO WIDE SLOT, FULLY INSERT.
Precautions • Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. • Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). • Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered. • Do not stack anything on top of the product. • Before moving the product, ensure the Disc Insert Hole is empty.
Safety Information Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Holding discs • Do not touch the playback side of the disc. • Hold the disc by the edges so that fingerprints will not get on the surface. • Do not stick paper or tape on the disc. Disc Storage • Do not keep in direct sunlight • Keep in a cool ventilated area • Keep in a clean Protection jacket.
Contents Safety Warnings Precautions Cautions on Handling and Storing Discs Licence Copyright GETTING STARTED 7 8 12 13 13 14 15 Icons that will be used in manual Disc Types and Characteristics Accessories Description Front Panel Rear Panel Remote Control CONNECTIONS 17 18 21 22 23 Connecting the Speakers Connecting the Video Out to your TV Connecting Audio from External Components Connecting to the Network Connecting the FM Antenna SETUP 24 25 26 26 26 26 26 28 28 28 28 28 29 29 29 30 30 30 31 32 3
Contents SETUP 37 37 37 37 37 37 37 38 38 39 Security BD Parental Rating DVD Parental Rating Change Password General Front Display Network Remote Control Support Software Upgrade Contact Samsung BASIC FUNCTIONS 40 40 41 41 42 42 43 45 47 48 48 49 51 51 Playing a Disc Using the Disc menu / Title menu / Popup menu Playing the Title List Using the Search and Skip Functions Slow Motion Play/Step Motion Play Repeat Playback Using the TOOLS button Listening to Music Sound Mode Playing back a Picture Playing
01 Getting Started Getting Started Icons that will be used in manual Make sure to check the following terms before reading the user manual. Term Logo Icon h z Z BD-ROM BD-RE/-R DVD-VIDEO Definition This involves a function available on a BD-ROM. This involves a function available on a BD-RE/-R disc recorded in the BD-RE format. This involves a function available on a DVD-VIDEO.
Getting Started Disc Types and Characteristics Logos of Discs that can be played Blu-ray Disc Compatibility Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual. Blu-ray Disc Dolby Digital Plus PAL broadcast system in U.K, France, Germany, etc.
01 BD-RE/-R Both the product and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. This Blu-ray disc can be recorded and played back. This product can play back a BD-RE/-R disc recorded by other compatible Blu-ray disc recorders. Getting Started Region Code DVD-VIDEO Disc Type Region Code Area A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
Getting Started Disc Format Using JPEG disc • CD-R/-RW, DVD-RW/-R recorded with UDF or JOLIET format can be played back. • Only JPEG files with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed. • Progressive JPEG is supported. DVD-RW/-R (V) • This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by this product once it has been finalized.
01 Container *.vro VRO VOB Video Codec Audio Codec Resolution MPEG2 AC3 MPEG LPCM 1920x1080 AC3 MPEG LPCM AAC 352x288 MPEG1 MPEG1 *.mpg *.mpeg MPEG2 PS H.264 1920x1080 1920x1080 AC3 AAC MP3 DD+ HE-AAC MPEG2 *.ts *.tp *.trp 352x288 H.264 TS VC1 Getting Started File Extension 1920x1080 1920x1080 1920x1080 Restrictions • • • • • Some of the Codecs above listed are not supported if having a problem with the contents.
Getting Started Notes on USB connection Supported devices: USB storage media, MP3 player, digital camera, USB card reader 1) Does not support if a folder or file name is longer than 125 characters. 2) A subtitle file bigger than 300 KB may not be properly displayed. 3) A certain USB/digital camera device may not be compatible with the product. 4) FAT16 and FAT32 file systems are supported. 5) Photo (JPEG), music (MP3) and video file should have their names in Korean or English.
01 Front Panel 1 2 3 4 5 6 7 8 9 9 10 11 1 2 3 4 REMOTE CONTROL SENSOR Detects signals from the remote control. DISC TRAY Opens to accept a disc. DISPLAY Displays the playing status, time, etc. OPEN/CLOSE BUTTON Opens and closes the disc tray. 5 FUNCTION BUTTON The mode switches as follows : BD/DVD D. IN AUX R. IPOD FM 6 STOP BUTTON Stops disc playback. 7 8 9 10 PLAY/PAUSE BUTTON Plays a disc or pauses playback.
Getting Started Rear Panel 1 2 3 4 5 SPEAKERS OUT 6 7 8 9 COMPONENT OUT 10 FM ANT FRONT LAN DIGITAL AUDIO IN HDMI OUT OPTICAL SUBWOOFER FRONT SPEAKER IMPEDANCE : 3 WIRELESS LAN 5V 350mA AUX IN VIDEO OUT 1 COOLING FAN The cooling fan supplies cool air to the product to prevent overheating and always revolves when the power is on. 2 2.1 CHANNEL SPEAKER OUTPUT CONNECTORS Connect the front, subwoofer speakers.
01 Getting Started Remote Control Tour of the Remote Control FUNCTION TV SOURCE POWER Turn the product on and off. If you want to change to TV mode, press the TV button. If you want to change to Home Cinema, press the BD button. Press numeric buttons to operate options. RECEIVER BD SLEEP Set a Sleep time to shut off the product. TA To open and close the disc tray. TV RDS DISPLAY 1 2 3 PTY- PTY SEARCH PTY+ 4 5 6 7 8 REPEAT 0 Press this to see the full screen on a TV.
Getting Started Installing batteries in the Remote Control * Battery size: AAA TV Brand Code List Brand Code Brand Code Admiral (M.Wards) 56, 57, 58 Mitsubishi/ MGA 18, 40, 59, 60, 75 A Mark 01, 15 MTC 18 NEC 18, 19, 20, 40, 59, 60 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Nikei 03 Onking 03 01, 18, 40, 48 Onwa 03 Panasonic 06, 07, 08, 09, 54, 66, 67, 73, 74 AOC ✎ NOTE Make sure to match the “+” and “–” ends of Bell & Howell (M.
02 Connections Connections This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Position of the product SW Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Connections Connecting The Speakers 1. Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks. SPEAKERS OUT Front Speaker (L) FRONT Subwoofer Front Speaker (R) SUBWOOFER FRONT SPEAKER IMPEDANCE : 3 SPEAKERS OUT FRONT SUBWOOFER FRONT SSPEAKER IMPEDANCE : 3 Connecting the Video Out to your TV Choose one of the three methods for connecting to a TV.
02 Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. ✎ NOTE Connections METHOD 1 : HDMI (BEST QUALITY) Certain HDMI output resolutions may not work, depending on your TV. After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI, Component or Composite) on your product. See your TV owner's manual for more information on how to select the TV's Video Input source.
Connections Red Blue Green METHOD 2 COMPONENT OUT FM ANT HDMI OUT Yellow AUX IN AN METHOD 3 VIDEO OUT METHOD 2 : Component Video (BETTER QUALITY) If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (PR, PB and Y) Jacks on the back of the product to the Component Video Input Jacks on your TV.
02 Connections Connecting Audio from External Components COMPONENT OUT FM ANT LAN DIGITAL AUDIO IN HDMI OUT OPTICAL AUX IN WIRELESS LAN 5V 350mA Optical Cable (not supplied) Red VIDEO OUT White Set-Top Box OPTICAL VCR Audio Cable (not supplied) If the external analogue component has only one Audio Out, connect either left or right. AUX OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1.
Connections Connecting to the Network This product enables you to view network based services (See pages 53~62) such as Smart Hub and BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend using an Wireless router or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Cable Network 1.
02 You can connect to the network with a Wireless IP sharer. 1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the Wireless LAN Adapter on the rear panel of the product. 2. Set the network options.
Setup Initial Settings 1. Turn on your TV after connecting the product. When you connect and turn on the product to a TV for the first time, the Initial Settings screen appears. • Home Menu My Contents Videos Photos Music Function My Devices Internet Settings Initial Settings | On-Screen Language Select a language for the on-screen displays.
03 DISC MENU MENU 3. Press the ▲▼ buttons to select the desired submenu, and then press the ENTER button. TITLE MENU POPUP 1 TOOLS Setup 2. Press the ◄► buttons to select Settings, and then press the ENTER button. Accessing the Settings Menu INFO 4. Press the ▲▼ buttons to select the desired item, and then press the ENTER button. 3 5. Press the EXIT button to exit the menu.
Setup Display You can configure various display options such as the TV Aspect Ratio, Resolution, etc. TV Aspect Depending on the type of television you have, you may want to adjust the screen size setting. • 16:9 Original : Select when you connect the product to a 16:9 TV screen. The product will display all content in its original aspect ratio. Content formatted in 4:3 will be displayed with black bars on the left and right. • 16:9 Full : Select when you connect the product to a 16:9 TV screen.
03 Setup Resolution according to the output mode • Blu-ray Disc/E-contents/Digital Contents playback HDMI / connected HDMI / not connected HDMI Mode Output Component Mode Blu-ray Disc E-contents/ Digital contents Component/ VIDEO Mode Blu-ray Disc E-contents/ Digital contents VIDEO Mode BD Wise Resolution of Blu-ray Disc 1080p@60F 576i/480i - - - Auto Max. Resolution of TV input Max.
Setup ✎ NOTE If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after the selection, please wait for 15 seconds. And then, the resolution will be reverted to the previous value automatically. Would you like to make a selection?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
03 Settings Speaker Display Network Distance If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front and subwoofer speakers. Speaker Audio Setup Audio | Level • You can set the Speaker Distance between 1ft(0.3m) and 30ft(9.0m). Distance System Language Settings Security Display General Audio Support > Move " Enter ' Return Network System Distance 10(ft) 3.0(m) | : 10(ft) 3.0(m) : 10(ft) 3.
Setup HDMI Audio The audio signals transmitted over the HDMI Cable can be toggled On/Off. • Off : Video is transmitted over the HDMI connection cable only, and audio is output through your product speakers only. • On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. ✎ NOTE HDMI Audio is automatically down-mixed to 2ch for TV speakers.
03 Setup Digital Output Selection Setup PCM Audio Stream on DVD Definition for Blu-ray Disc Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) HDMI supported HDMI supported HDMI supported HDMI supported AV receiver AV receiver AV receiver AV receiver Connection Audio Stream on Blu-ray Disc Bitstream (Unprocessed) PCM Up to 7.1ch PCM DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Up to 7.
Setup Wired Network Audio Sync Video may look slower than the audio when the product is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. • You can set the audio delay time between 0 msec and 300 msec. Set it to the optimal status. Setting Up a Wired Connection - Auto 1. Press the ▲▼ buttons to select Wired. Settings Audio Network System Network Before you begin, contact your ISP to find out if your IP address is static or dynamic.
03 Wireless Network 1. Press the ▲▼ buttons to select Wired, and then press the ENTER button. • Wireless (General) 2. Press the ◄► buttons to select IP Settings, and then press the ENTER button. • One Foot Connection System Language Security IP Mode Manual 0 . 0 . 0 . 0 0 . 0 . 0 . 0 0 . 0 . 0 . 0 IP Address Subnet Mask Gateway DNS Mode Manual 0 . 0 . 0 . 0 DNS Server General OK Support > Move " Enter ' Return 3. Press the ENTER button to select IP Mode. 4.
Setup 4. On the Security screen, enter your network’s Pass Phrase. Enter numbers directly using your remote control. To select a letter, press the ▲▼◄► buttons to move the cursor, then press the ENTER button. Settings Display Audio Network Settings Enter security key. 0 entered To enter the Network settings into your product, follow these steps: 1. Follow Steps 1 through 5 in the ‘Setting Up the Wireless Network Connection - Auto’ procedure. 2.
03 2. Press the ENTER button. The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function. If your wireless router has a WPS(PBC) button, follow these steps: 1. Press the ▲▼ buttons to select WPS(PBC). Settings Network Settings Display Select a network connection type. Audio Network 3. Place the Samsung Wireless Router within 25 cm (10 inches) of Samsung Wireless LAN Adapter to connect. Setup WPS(PBC) 4.
Setup System Initial Settings By using the Initial Settings function, you can set the language, Network Settings, etc. For more information about the Initial Settings function, refer to the Initial Settings section of this user manual. (See page 24) Anynet+ (HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature. To operate this function, connect this product to a Samsung TV with an HDMI cable.
03 Setup Reset Change Password All settings will revert to the default except for the network and Smart Hub settings. You need enter the password for this function. Change the 4-digit password used to access security functions. ✎ NOTE If you forgot your password The default password is 0000. Language You can select the language you prefer for the Home menu, disc menu, etc. • On-Screen Menu : Select the language for the on-screen displays.
Setup 6. If this is the first time you are using the function, it will ask you to allow or deny remote control of the product. Select Allow. 7. Follow the instructions that came with the application to control the product. ✎ NOTE Your product must be connected to the Internet to use the By Internet function. The upgrade is complete when the product turns off, and then turns on again by itself.
03 To upgrade by Disc, follow these steps: 1. Visit www.samsung.com/bluraysupport. ✎ NOTE When the system upgrade is done, check the software details in the software Upgrade menu. 2. Download the latest disc software upgrade zip archive to your computer. Do not turn off the product during the software 3. Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file. To use the Via download function, your 4. Write the folder onto a disc.
Basic Functions Playing a Disc Disc Structure The content of discs are usually divided as shown below. Playback 1. Press the OPEN/CLOSE ( ) button to open the disc tray. 2. Place a disc gently into the tray with the disc’s label facing up. • Blu-ray Disc, DVD-VIDEO title 1 chapter 1 chapter 2 chapter 1 title 2 chapter 2 chapter 3 track 4 track 5 • Audio CD (CD-DA) track 1 3. Press the OPEN/CLOSE ( ) button to close the disc tray. 4. Press the PLAY (►) button.
04 Using the Search and Skip Functions Z 1. During playback, press the TITLE MENU button on the remote control. 2. Press the ◄ ► buttons to make the desired selection, then press the ENTER button. TITLE MENU POPUP Searching for a Desired Scene hzZyx ✎ NOTE Depending on the disc, the menu items may differ and this menu may not be available. The Title Menu will only be displayed if there are at least two titles on the disc. Using the Popup Menu h 1.
Basic Functions Slow Motion Play/Step Motion Play Repeat > Off Slow Motion Play hzZyx • In pause ( ) mode, press the SEARCH () button. If you press the SEARCH () button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 • To return to normal speed playback, press the PLAY (► ) button. ✎ NOTE 3. To return to normal play, press the REPEAT button again. 4. Press the ▲▼ buttons to select Off, the press the ENTER button. ✎ NOTE Depending on the disc, the Repeat function may not be available.
04 During playback, you can operate disc menu by pressing the TOOLS button. TOOLS • TOOLS Menu Screen Tools Title Search Chapter Search Time Search Picture Settings Audio User EQ Subtitle Angle 1/2 : 1/20 : 00:00:13/01:34:37 : Normal : 1/4 ENG Multi CH : : mode will be also displayed if the Blu-ray Disc has a BONUSVIEW section. Use the ◄► button to switch between primary and secondary audio modes. This function depends on what audio languages are encoded on the disc and may not be available.
Basic Functions Caption Function x • You must have some experience with video extraction and editing in order to use this feature properly. • To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media f le (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi • Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.
04 7 ENTER button : Plays the selected track. 8 ► button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist. ◄ button : During playback, moves to the previous page in the Music List or moves to the previous track in the Playlist. 9 STOP button : Stops a track. 0 $ button : Plays the next track. ! # button : Plays the previous track.
Basic Functions Playing an Audio CD (CD-DA)/MP3 Repeat an Audio CD (CD-DA)/MP3 1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc tray. • For an Audio CD (CD-DA), the first track will be played automatically. • For an MP3 disc, press the ◄► buttons to select Music, then press the ENTER button. 1. During the Playlist playback, press the REPEAT button. Audio CD (CD-DA)/MP3 Screen Elements 1 2 3 REPEAT 2. Select the desired play mode by pressing the REPEAT button repeatedly.
04 Sound Mode 1/2 Page Selected Items : 3 TRACK 001 TRACK 002 00:43 03:56 TRACK 003 TRACK 004 04:41 04:02 TRACK 005 TRACK 006 03:43 03:40 TRACK 007 TRACK 008 04:06 03:52 Close Edit Mode ( ) Page Tools DSP(Digital Signal Processor) Function You can select mode to optimize the sound for sound based on your tastes. Press the DSP button. " Select ' Return 5. Select a desired track and press the TOOLS button. 6.
Basic Functions Playing back a Picture G Viewing Photo Files 1. Connect a USB memory that contains JPEG files or insert a disc that contains JPEG files. 2. Press the ◄► buttons to select the My Contents, and then press the ENTER button after press the ▲▼ buttons to select the Photos. 3. Press the ▲▼◄► buttons to select the folder you want to play, and then press the ENTER button. • Background Music : Select this if you want to listen to music while viewing a picture.
04 In Stop mode, connect the USB storage device to the USB port on the front panel of the product. My Contents Listening to Radio Using buttons on the Remote Control 1. Press the FUNCTION button to select FM. 2. Tune in to the desired station. Videos Basic Functions 2. Connected Device Photos USB Function My Devices Music Internet Settings " Enter ' Return Safely Remove USB d WPS(PBC) 3. Press the ENTER button. 4.
Basic Functions About RDS broadcasting Using the RDS (Radio Data System) to receive FM stations RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc. When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display.
04 codes Connecting iPod/iPhone Using the USB Cable If the system is connected to iPod/iPhone, you can play music in iPod/iPhone using the system. Before you start! • The PTY Search is only applicable to preset stations. • To stop searching any time during the process, press STOP () button while searching. • There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again.
Basic Functions iPod nano (5th generation) iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation) iPod nano (1st generation) iPhone 4 iPhone 3GS iPhone 3G iPhone ✎ NOTE “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
05 Network Services Read the following instructions before using any network service. 1. Connect the product to the network. (see pages 22~23) 2. Configure the network settings. (see pages 32~35) 3. The Smart Hub screen appears. ✎ NOTE Certain applications are available only in certain countries. Network Services You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the product to your network. 4. The Terms of Service Agreement screen appears.
Network Services Smart Hub at a Glance 1 2 3 4 6 7 My Applications : Displays your personal gallery of applications which you can add to, modify, and delete. 5 Search Your Video Navigation Help : Displays the remote control buttons you can use to navigate in Smart Hub. • RED (A) : To log in to Smart Hub. • GREEN (B) : To sort the applications. • YELLOW (C) : To edit the applications. • BLUE (D) : To change the settings of Smart Hub.
05 Creating an Account Through your remote, you can use the OnScreen Keypad to enter letters, numbers, and symbols. To establish your own, exclusive, configuration of Smart Hub, create your own Smart TV Account. To create an account, follow these steps: 1. 1 1 2 3 .,– abc def 4 5 6 ghi jkl mno 7 8 9 pqrs tuv wxyz Shift Press the RED (A) button on your remote control. The Login screen appears.
Network Services 8. When done, press the ENTER button to select OK, and then press the ENTER button again. The Login screen re-appears. 2. Select the Down Arrow next to the Smart TV ID field, and then press the ENTER button. 9. Select Login screen, and then press the ENTER button. 3. Select your ID from the list that appears, and then press the ENTER button. The Login screen appears. 4. Select Password, and then press the ENTER button. The Password window and a keypad appears. 5.
05 1. 2. In the Settings menu, select Register Service Account, and then press the ENTER button. The Register Service Account Window appears. Press the ▲▼ arrow buttons to select a Service Provider you want to associate with your Smart TV Account, and then press the ENTER button. ✎ NOTE If you have a Samsung account and you want 3. 3. On the next screen, enter a new password on the first line. Enter it again on the second line to confirm. 4. The Changing Password Complete message screen appears.
Network Services 3. 4. After a few moments, Smart Hub automatically resets. The screen may go black, then Smart Hub re-appears. In a few moments, it starts the re-initialization procedure. To complete the re-initialization, go to Step 4 in Starting Smart Hub for the First Time. (See page 53) ✎ NOTE The functions in the Edit Mode Menu bar are described below. ✎ NOTE Some menu items may not appear on the screen.
05 Rename Folder The Move to Folder function lets you move a application to a folder. To use the Move to Folder function, follow these steps: The Rename Folder function lets you rename folders. To use the Rename Folder function, follow these steps: 1. Press the YELLOW (C) button on your remote. 1. Press the YELLOW (C) button on your remote. 2. Select a application, and then press the ENTER button. 2. Press the ▲▼◄► to select a folder, and then press the ENTER button. 3.
Network Services Unlock 1. 2. 3. 4. 5. Press the YELLOW (C) button on your remote. Press the ▲▼◄► to select a locked application, and then press the ENTER button. Press the ▲▼◄► to select Unlock, and then press the ENTER button. The Security window appears. Enter the Parental Security Code (See page 37). If you have not created a Parental Security Code, enter 0000. Press the ENTER button. The Lock Service Released window appears confirming the lock has been release, and then closes.
05 Samsung Apps by category To use the Samsung Apps screen, follow these steps: The following categories are available: 1. Press the ◄► buttons to move to the category list on the left. 2. Press the ▲▼ to highlight a category. In a few seconds, the Samsung Apps screen displays the applications in that category. The Sort tabs appear across the top. 3. Press the ► button to move to the displayed applications or services. 4.
Network Services Using the coloured buttons on your remote with Samsung Apps • RED (A) (Login) : To log into your Smart TV Account. • GREEN (B) (Thumbnail/List View) : To toggle applications between Thumbnail and List view. • BLUE (D) (Sort By) : To sort the applications in a category by Recommended, Most Downloaded, Most Recent, or Name. • Return : To return to the previous menu. ✎ NOTE The Internet contents services may be added or deleted by providers without notice.
06 Other information Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the product, disconnect the power cord and contact the nearest authorized dealer or Samsung Electronics Service Centre. Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. The iPod fails to connect.
Other information Symptom Check/Remedy Aspect ratio cannot be changed. • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. • The product is not working. (Example: The power goes out or a strange noise is heard.) • Press and hold the romote control's STOP ( ) button for 5 seconds in STANDBY mode. • The Product is not working normally.
06 Other information Symptom Check/Remedy PC Share Manager function I can see folders shared through the PC Share Manager, but I cannot see the files. • Since it shows only files corresponding to the Image, Music, and Movie categories, files that do not correspond to these categories may not be displayed. AllShare function Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded.
Other information Specifications Weight Dimensions Operating Temperature Range Operating Humidity Range Signal/noise ratio Usable sensitivity Total harmonic distortion BD (Blu-ray Disc) 3.2 kg 430.0 (W) x 60.0 (H) x 279.1 (D) mm General +5°C to +35°C 10 % to 75 % 55 dB FM Tuner 12 dB 0.5 % Reading Speed : 9.834 m/sec Reading Speed : 6.98 ~ 7.68 m/sec. DVD (Digital Versatile Disc) Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec.
English Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be in interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com.
Français Avis de Cinavia : Ce produit utilise la technologie Cinavia pour limiter l'utilisation de copies non autorisées de certains films et vidéos commerciaux ainsi que leurs bandes son. Lorsqu'une copie non autorisée est détectée, un message est affiché et la lecture ou la copie est interrompue. Des informations complémentaires concernant la technologie Cinavia sont disponibles sur le site http:// www.cinavia.com du Centre d'information consommateur Cinavia.
Suomi Cinavia-ilmoitus: Tämä tuote käyttää Cinaviatekniikkaa rajoittaakseen joidenkin kaupallisesti tuotettujen elokuvien ja videoiden sekä niiden ääniraitojen luvattomien kopioiden käyttöä. Kun luvattoman kopion kielletty käyttö tunnistetaan, viesti tulee näkyviin ja toisto tai kopiointi keskeytetään. Saat lisätietoja Cinavia-tekniikasta Cinavia Online Consumer Information Centre -kuluttajakeskuksesta osoitteessa http://www.cinavia.com.
Polski Komentarz Cinavia : Urządzenie to korzysta z technologii Cinavia w celu ograniczenia wykorzystania nieupoważnionych kopii pewnych filmów i obrazów wideo wyprodukowanych w celach komercyjnych, oraz ich ścieżek dźwiękowych. W przypadku wykrycia zakazanego użycia nieautoryzowanej kopii, zostanie wyświetlony komunikat i proces odtwarzania i kopiowania zostanie zatrzymany. Więcej informacji o technologii Cinavia można uzyskać w Centrum obsługi klienta Cinavia online: http:// www.cinavia.com.
Hrvatski Obavijest o tehnologiji Cinavia : ovaj proizvod rabi tehnologiju Cinavia kako bi se ograničila uporaba neovlaštenih kopija nekih komercijalno proizvedenih filmova i videozapisa i njihovih zvučnih zapisa. Kada se otkrije zabranjena uporaba neovlaštene kopije, prikazat će se poruka i prekinut će se reproduciranje i kopiranje. Ostale informacije o tehnologiji Cinavia dostupne su u mrežnom informacijskom centru za korisnike tvrtke Cinavia na http://www.cinavia. com.
繁體中文 Cinavia 聲明:本產品使用 Cinavia 技術來限制 使用某些商業製造的電影和視訊及其聲道的未經授權副本。當偵測 到禁止使用的未經授權副本時,將會顯示一則訊息,並且播放或複 製動作將會中斷。 Cinavia 技術的詳細資訊在 Cinavia 線上消費者資訊中心中提供,網址為:http://www. cinavia.com。若要透過郵件請求關於 Cinavia 的其他資訊,請將含有您的郵寄地址的明信片寄往:Cinavia Consumer Information Centre, P.O. Box 86851, San Diego, CA, 92138, USA.
Tiếng Việt Thông báo của Cinavia: Sản phẩm này sử dụng công nghệ Cinavia để hạn chế việc sử dụng các bản sao trái phép một số bộ phim và video được sản xuất thương mại và các đoạn âm thanh của chúng. Khi bị phát hiện sử dụng bản sao trái phép, một thông báo sẽ được hiển thị và việc phát lại hoặc sao chép sẽ bị gián đoạn.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Contact Centre Area ` North America Canada Mexico U.S.A Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.