HT-D5100 5.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-D5100_ELS_1224.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous CAUTION : TO PREVENT ELECTRIC voltage” inside the product that presents SHOCK, MATCH WIDE BLADE OF PLUG a risk of electric shock or personal injury. TO WIDE SLOT, FULLY INSERT.
Precautions • Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. • Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). • Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered. • Do not stack anything on top of the product. • Before moving the product, ensure the Disc Insert Hole is empty.
Safety Information Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Holding discs • Do not touch the playback side of the disc. • Hold the disc by the edges so that fingerprints will not get on the surface. • Do not stick paper or tape on the disc. Disc Storage • Do not keep in direct sunlight • Keep in a cool ventilated area • Keep in a clean Protection jacket.
Contents Safety Warnings Precautions Cautions on Handling and Storing Discs Licence Copyright GETTING STARTED 7 7 8 12 13 13 14 15 Icons that will be used in manual Disc Types and Characteristics Accessories Description Front Panel Rear Panel Remote Control CONNECTIONS 17 18 21 23 24 25 Connecting the Speakers Attaching the Toroidal Ferrite Core to the Speaker Cable of the Main Unit Connecting the Optional Wireless Receiver Module Attaching the Toroidal Ferrite Core to the Power Cord of the Main Uni
Contents SETUP 41 41 41 41 41 41 41 42 42 43 Security BD Parental Rating DVD Parental Rating Change Password General Front Display Network Remote Control Support Software Upgrade Contact Samsung BASIC FUNCTIONS 44 44 45 45 46 46 47 49 51 52 53 54 56 56 57 58 Playing a Disc Using the Disc menu / Title menu / Popup menu Playing the Title List Using the Search and Skip Functions Slow Motion Play/Step Motion Play Repeat Playback Using the TOOLS button Listening to Music Sound Mode Playing back a Picture Pl
01 Getting Started Getting Started Icons that will be used in manual Make sure to check the following terms before reading the user manual. Term Logo Icon h z Z BD-ROM BD-RE/-R DVD-VIDEO Definition This involves a function available on a BD-ROM. This involves a function available on a BD-RE/-R disc recorded in the BD-RE format. This involves a function available on a DVD-VIDEO.
Getting Started Disc Types and Characteristics Logos of Discs that can be played Blu-ray Disc Compatibility Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual. Blu-ray Disc 3D Blu-ray Disc Dolby Digital Plus PAL broadcast system in U.K, France, Germany, etc.
01 BD-RE/-R Both the product and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. This Blu-ray disc can be recorded and played back. This product can play back a BD-RE/-R disc recorded by other compatible Blu-ray disc recorders. Getting Started Region Code DVD-VIDEO Disc Type Region Code Area A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
Getting Started Disc Format Using JPEG disc • CD-R/-RW, DVD-RW/-R recorded with UDF or JOLIET format can be played back. • Only JPEG files with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed. • Progressive JPEG is supported. DVD-RW/-R (V) • This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by this product once it has been finalized.
01 Container *.vro VRO VOB Video Codec Audio Codec Resolution MPEG2 AC3 MPEG LPCM 1920x1080 AC3 MPEG LPCM AAC 352x288 MPEG1 MPEG1 *.mpg *.mpeg MPEG2 PS H.264 352x288 1920x1080 1920x1080 AC3 AAC MP3 DD+ HE-AAC MPEG2 *.ts *.tp *.trp H.264 TS VC1 Getting Started File Extension 1920x1080 1920x1080 1920x1080 Restrictions • • • • • Some of the Codecs above listed are not supported if having a problem with the contents.
Getting Started Notes on USB connection Supported devices: USB storage media, MP3 player, digital camera, USB card reader 1) Does not support if a folder or file name is longer than 125 characters. 2) A subtitle file bigger than 300 KB may not be properly displayed. 3) A certain USB/digital camera device may not be compatible with the product. 4) FAT16 and FAT32 file systems are supported. 5) Photo (JPEG), music (MP3) and video file should have their names in Korean or English.
01 Getting Started Description Front Panel 1 2 3 4 5 6 7 8 9 10 11 12 5V 500mA ASC IN 1 2 REMOTE CONTROL SENSOR Detects signals from the remote control. DISC TRAY Opens to accept a disc. 3 POWER BUTTON ( 4 FUNCTION BUTTON The mode switches as follows : BD/DVD D. IN AUX R. IPOD W. IPOD FM 5 6 DISPLAY Displays the playing status, time, etc. STOP BUTTON Stops disc playback. 7 8 9 10 11 PLAY/PAUSE BUTTON Plays a disc or pauses playback.
Getting Started Rear Panel 1 2 3 4 DIGITAL AUDIO IN HDMI OUT 5 6 7 8 9 COMPONENT OUT FM ANT 10 11 SPEAKERS OUT CENTER FRONT SURROUND SUBWOOFER FRONT SURROUND LAN OPTICAL WIRELESS LAN WIRELESS AUX IN VIDEO OUT SPEAKER IMPEDANCE : 3 1 LAN TERMINAL Can be used for network based services (see pages 59~68), BD-LIVE and software upgrade under the network connection.
01 Getting Started Remote Control Tour of the Remote Control FUNCTION TV SOURCE POWER Turn the product on and off. If you want to change to TV mode, press the TV button. If you want to change to Home Cinema, press the BD button. Press numeric buttons to operate options. RECEIVER BD SLEEP Set a Sleep time to shut off the product. TA To open and close the disc tray. TV RDS DISPLAY 1 2 3 PTY- PTY SEARCH PTY+ 4 5 6 7 8 REPEAT 0 Press this to see the full screen on a TV.
Getting Started Installing batteries in the Remote Control * Battery size: AAA TV Brand Code List Brand Code Brand Code Admiral (M.Wards) 56, 57, 58 Mitsubishi/ MGA 18, 40, 59, 60, 75 A Mark 01, 15 MTC 18 NEC 18, 19, 20, 40, 59, 60 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Nikei 03 Onking 03 01, 18, 40, 48 Onwa 03 Panasonic 06, 07, 08, 09, 54, 66, 67, 73, 74 AOC ✎ NOTE Make sure to match the “+” and “–” ends of Bell & Howell (M.
02 Connections Connections This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Position of the product SW Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Connections Speaker Components (L) (R) (L) FRONT (R) CENTRE SURROUND SPEAKER CABLE SUBWOOFER Connecting The Speakers 1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab. 3. Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks.
02 Connections Connecting the Optional Wireless Receiver Module To connect the surround speakers wirelessly, you have to purchase the wireless receiver module and TX card from your Samsung retailer. • This product should be connected with the SWA-5000 only.
Connections ! CAUTION Do not insert any other card except the TX card dedicated to the product. If a different TX card is used, the product may be damaged or the card may not be removed easily. Do not insert the TX card upside down or in the reverse direction. Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem. The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture.
02 Connections Connecting the Video Out to your TV Choose one of the three methods for connecting to a TV. METHOD 1 FM ANT LAN DIGITAL AUDIO IN HDMI OUT OPTICAL WIRELESS LAN WIRELESS HDMI OUT HDMI IN METHOD 1 : HDMI (BEST QUALITY) Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. ✎ NOTE Certain HDMI output resolutions may not work, depending on your TV.
Connections Red Green Blue METHOD 2 COMPONENT OUT SPEAKERS OUT CENTER FRONT SURROUND METHOD 3 Yellow SUBWOOFER FRONT AUX IN VIDEO OUT SURROUND SPEAKER IMPEDANCE : 3 METHOD 2: Component Video (BETTER QUALITY) If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (PR, PB and Y) Jacks on the back of the product to the Component Video Input Jacks on your TV.
02 Connections Connecting Audio from External Components COMPONENT OUT FM ANT DIGITAL AUDIO IN HDMI OUT OPTICAL WIRELESS AUX IN Red VIDEO OUT White Optical Cable (not supplied) Set-Top Box Audio Cable (not supplied) If the external analogue component has only one Audio Out, connect either left or right. VCR OPTICAL AUX OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1.
Connections Connecting to the Network This product enables you to view network based services (See pages 59~68) such as Smart Hub and BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend using an Wireless router or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Cable Network 1.
02 Connections Wireless Network You can connect to the network with a Wireless IP sharer. 1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the Wireless LAN Adapter on the rear panel of the product. 2. Set the network options.
Setup Initial Settings 1. Turn on your TV after connecting the product. When you connect and turn on the product to a TV for the first time, the Initial Settings screen appears. • Home Menu My Contents Videos Photos Music Function My Devices Internet Settings Initial Settings | On-Screen Language Select a language for the on-screen displays.
03 DISC MENU MENU 3. Press the ▲▼ buttons to select the desired submenu, and then press the ENTER button. TITLE MENU POPUP 1 TOOLS Setup 2. Press the ◄► buttons to select Settings, and then press the ENTER button. Accessing the Settings Menu INFO 4. Press the ▲▼ buttons to select the desired item, and then press the ENTER button. 3 5. Press the EXIT button to exit the menu.
Setup Depending on the content and the position of Display You can configure various display options such as the TV Aspect Ratio, Resolution, etc. 3D Settings Screen Size Select whether to play a Blu-ray Disc with 3D contents in 3D Mode.
03 BD Wise (Samsung Products only) Depending on the type of television you have, you may want to adjust the screen size setting. BD Wise is Samsung’s latest inter-connectivity feature. When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the BD/DVD disc.
Setup Resolution according to the output mode • Blu-ray Disc/E-contents/Digital Contents playback HDMI / connected HDMI / not connected HDMI Mode Output Component Mode Blu-ray Disc E-contents/ Digital contents Component/ VIDEO Mode Blu-ray Disc E-contents/ Digital contents VIDEO Mode BD Wise Resolution of Blu-ray Disc 1080p@60F 576i/480i - - - Auto Max. Resolution of TV input Max.
03 If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after the selection, please wait for 15 seconds. And then, the resolution will be reverted to the previous value automatically. Would you like to make a selection?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
Setup Audio Speaker Settings Settings Speaker Settings Display Audio | Level Network System Distance If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, centre, surround and subwoofer speakers. • You can set the Speaker Distance between 1ft(0.3m) and 30ft(9.0m).
03 By setting the Musical Auto Calibration (MAC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for your environment. ✎ NOTE Setting the Musical Auto Calibration function takes about 3 minutes. The Musical Auto Calibration setup can be made when there is no disc in the product.
Setup HDMI Audio The audio signals transmitted over the HDMI Cable can be toggled On/Off. • Off : Video is transmitted over the HDMI connection cable only, and audio is output through your product speakers only. • On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. ✎ NOTE HDMI Audio is automatically down-mixed to 2ch for TV speakers.
03 Setup Digital Output Selection Setup PCM Audio Stream on DVD Definition for Blu-ray Disc Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) HDMI supported HDMI supported HDMI supported HDMI supported AV receiver AV receiver AV receiver AV receiver Connection Audio Stream on Blu-ray Disc Bitstream (Unprocessed) PCM Up to 7.1ch PCM DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Up to 7.
Setup Wired Network Audio Sync Video may look slower than the audio when the product is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. • You can set the audio delay time between 0 msec and 300 msec. Set it to the optimal status. Setting Up a Wired Connection - Auto 1. Press the ▲▼ buttons to select Wired. Settings Audio Network System Network Before you begin, contact your ISP to find out if your IP address is static or dynamic.
03 IP Settings Display Audio IP Mode Network IP Address System Subnet Mask Language Security Manual 0 . 0 . 0 . 0 0 . 0 . 0 . 0 0 . 0 . 0 . 0 Gateway DNS Mode Manual 0 . 0 . 0 . 0 DNS Server General OK Support > Move " Enter ' Return Setting Up the Wireless Network Connection - Auto Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key.
Setup Settings Settings Display Audio Enter security key. 0 entered Audio Network System Language Security General Support IP Settings Display Network Settings IP Mode b g h i j m n o p s t a/A c d e f 1 2 3 k l 4 5 6 q r 7 8 9 u v * Delete w x y Space z 0 one of the set up screens you used to set up your router or modem. 5. When done, press the ▲▼◄► buttons to move the cursor to Done, and then press the ENTER button. The Network Status screen appears.
03 Network Settings Display Select a network connection type. Audio Network Setup Network Status Settings Wired Check whether a connection to the network and the Internet have been established. System Wireless Language (General) Security WPS(PBC) General One Foot Support Connection Connect to the Access Point easily by pressing the WPS(PBC) button. Choose this if your Access Point supports Push Button Configuration(PBC).
Setup Anynet+ (HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature. To operate this function, connect this product to a Samsung TV with an HDMI cable. With Anynet+ on, you can operate this product using a Samsung TV remote control and start disc playback simply by pressing the PLAY (►) button on the TV’s remote control. For more information, please see the TV user manual. • Off : Anynet+ functions will not work.
03 You can select the language you prefer for the Home menu, disc menu, etc. • On-Screen Menu : Select the language for the on-screen displays. • Disc Menu : Select the language for the disc menu displays. • Audio : Select the language for disc audio. • Subtitle : Select the language for disc subtitles. ✎ NOTE The selected language will only appear if it is supported on the disc. Change Password Change the 4-digit password used to access security functions. If you forgot your password 1.
Setup 6. If this is the first time you are using the function, it will ask you to allow or deny remote control of the product. Select Allow. 7. Follow the instructions that came with the application to control the product. ✎ NOTE Your product must be connected to the Internet to use the By Internet function. The upgrade is complete when the product turns off, and then turns on again by itself.
03 To upgrade by Disc, follow these steps: 1. Visit www.samsung.com/bluraysupport. ✎ NOTE Setup By Disc When the system upgrade is done, check the software details in the software Upgrade menu. 2. Download the latest disc software upgrade zip archive to your computer. Do not turn off the product during the software 3. Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file. To use the Via download function, your 4.
Basic Functions Playing a Disc Disc Structure The content of discs are usually divided as shown below. Playback 1. Press the OPEN/CLOSE ( ) button to open the disc tray. 2. Place a disc gently into the tray with the disc’s label facing up. • Blu-ray Disc, DVD-VIDEO title 1 chapter 1 chapter 2 chapter 1 title 2 chapter 2 chapter 3 track 4 track 5 • Audio CD (CD-DA) track 1 3. Press the OPEN/CLOSE ( ) button to close the disc tray. 4. Press the PLAY (►) button.
04 Using the Search and Skip Functions Z 1. During playback, press the TITLE MENU button on the remote control. 2. Press the ◄ ► buttons to make the desired selection, then press the ENTER button. TITLE MENU POPUP Searching for a Desired Scene hzZyx ✎ NOTE Depending on the disc, the menu items may differ and this menu may not be available. The Title Menu will only be displayed if there are at least two titles on the disc. Using the Popup Menu h 1.
Basic Functions Slow Motion Play/Step Motion Play Repeat > Off Slow Motion Play hzZyx • In pause ( ) mode, press the SEARCH () button. If you press the SEARCH () button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 • To return to normal speed playback, press the PLAY (► ) button. ✎ NOTE 3. To return to normal play, press the REPEAT button again. 4. Press the ▲▼ buttons to select Off, the press the ENTER button. ✎ NOTE Depending on the disc, the Repeat function may not be available.
04 During playback, you can operate disc menu by pressing the TOOLS button. TOOLS • TOOLS Menu Screen Tools Title Search Chapter Search Time Search Picture Settings Audio User EQ Subtitle Angle 1/2 : 1/20 : 00:00:13/01:34:37 : Normal : 1/4 ENG Multi CH : : Basic Functions Information about the primary / secondary Using the TOOLS button mode will be also displayed if the Blu-ray Disc has a BONUSVIEW section. Use the ◄► button to switch between primary and secondary audio modes.
Basic Functions Caption Function x • You must have some experience with video extraction and editing in order to use this feature properly. • To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi • Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.
04 7 ENTER button : Plays the selected track. 8 ► button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist. ◄ button : During playback, moves to the previous page in the Music List or moves to the previous track in the Playlist. 9 STOP button : Stops a track. 0 $ button : Plays the next track. ! # button : Plays the previous track.
Basic Functions Playing an Audio CD (CD-DA)/MP3 Repeat an Audio CD (CD-DA)/MP3 1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc tray. • For an Audio CD (CD-DA), the first track will be played automatically. • For an MP3 disc, press the ◄► buttons to select Music, then press the ENTER button. 1. During the Playlist playback, press the REPEAT button. Audio CD (CD-DA)/MP3 Screen Elements 1 2 3 REPEAT 2. Select the desired play mode by pressing the REPEAT button repeatedly.
04 1/2 Page Selected Items : 3 TRACK 001 TRACK 002 00:43 03:56 TRACK 003 TRACK 004 04:41 04:02 TRACK 005 TRACK 006 03:43 03:40 TRACK 007 TRACK 008 04:06 03:52 Close Edit Mode ( ) Page Tools " Select ' Return 5. Select a desired track and press the TOOLS button. 6. To play the selected track(s), select Play Selected in the Tools menu and press ENTER.
Basic Functions Dolby Pro Logic II Mode Playing back a Picture G You can select the desired Dolby Pro Logic II audio mode. Press the Viewing Photo Files PL II button. MUSIC When listening to music, you can experience sound effects as if you are listening to the actual performance. MOVIE Adds realism to the movie soundtrack. PROLOGIC You can listen to a 2CH sound source in 5.1CH surround sound with all speakers active. - A specific speaker(s) may not be output depending on the input signal.
04 ✎ NOTE If the system is connected to a BD Wise 2. function, the photo file should exist in the same storage media with the music file. However, the sound quality can be affected by the bit rate of the MP3 file, the size of the photo and the encoding method. High bit rate of 20Mbps or more video files can be stopped during the playback. Playing back a USB Storage Device F In Stop mode, connect the USB storage device to the USB port on the front panel of the product.
Basic Functions Listening to Radio Using buttons on the Remote Control 1. Press the FUNCTION button to select FM. 2. Tune in to the desired station. • Preset Tuning 1 : You must first add a desired frequency as a preset. Press the STOP () button to select PRESET and then press the ) button to select the preset TUNING/CH ( station. • Manual Tuning : Press the STOP () button to select MANUAL and then press the TUNING/ ) button to tune in to a lower or higher CH ( frequency.
04 To search for a program using the PTY You can see the RDS signals the station sends on the display. codes Press the RDS DISPLAY button while listening to an FM station. RDS DISPLAY 1 • Each time you press the button, the display change to show you the following information : PS NAME RT CT Frequency PS (Program Service) While searching, appears and then the station names will be displayed. appears if no signal is sent.
Basic Functions Connecting iPod/iPhone Using the USB Cable If the system is connected to iPod/iPhone, you can play music in iPod/iPhone using the system. 5V 500mA ASC IN 50 1. Connect iPod/iPhone using the USB cable to the front USB port. • Your iPod is automatically turned on. • “iPod” message appears on the TV screen. 2. Press the ENTER button. 3. Select the music file to play.
04 Display Function GREEN LED ON Power on /Charging completed RED LED ON Charging. ✎ NOTE “Made for iPod” means that ✎ NOTE The LED indicates the charging state of the built-in battery in the wireless iPod transmitter. Check the charging state of iPod/iPhone by checking the charging indication of its battery. ! CAUTION It links to Wireless Dock Cradle when SWA-5000 is used. Only Samsung wireless transmitter that is compliant with the system can be recharged.
Basic Functions How to Link the Wireless Transmitter with the Main Unit 1. Turn off your Home Cinema. 2. Press the 4, 7, 6, 3 buttons on the remote control in order. • The Power LED blinks once. Operation status of the wireless transmitter's LED LIN K 3. Connect the iPod/iPhone to the Wireless transmitter.
05 Network Services Read the following instructions before using any network service. 1. Connect the product to the network. (see pages 24~25) 2. Configure the network settings. (see pages 36~39) 3. The Smart Hub screen appears. ✎ NOTE Certain applications are available only in certain countries. Network Services You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the product to your network. 4. The Terms of Service Agreement screen appears.
Network Services Smart Hub at a Glance 1 2 3 4 6 7 My Applications : Displays your personal gallery of applications which you can add to, modify, and delete. 5 Search Your Video Navigation Help : Displays the remote control buttons you can use to navigate in Smart Hub. • RED (A) : To log in to Smart Hub. • GREEN (B) : To sort the applications. • YELLOW (C) : To edit the applications. • BLUE (D) : To change the settings of Smart Hub.
05 Creating an Account Through your remote, you can use the OnScreen Keypad to enter letters, numbers, and symbols. To establish your own, exclusive, configuration of Smart Hub, create your own Smart TV Account. To create an account, follow these steps: 1. 1 1 2 3 .,– abc def 4 5 6 ghi jkl mno 7 8 9 pqrs tuv wxyz Shift Press the RED (A) button on your remote control. The Login screen appears.
Network Services 8. When done, press the ENTER button to select OK, and then press the ENTER button again. The Login screen re-appears. 2. Select the Down Arrow next to the Smart TV ID field, and then press the ENTER button. 9. Select Confirm password, and then press the ENTER button. 3. Select your ID from the list that appears, and then press the ENTER button. The Login screen re-appears. 4. Select Password, and then press the ENTER button. The Password window and a keypad appears. 5.
05 Change Password If you have existing accounts with any of the providers listed by the Register Service Account function, you can associate the provider account and the provider account password with your Smart TV Account. If you associate the account, you will be able to log onto the account through Smart Hub easily, without entering your account name or password. The Change Password function lets you change your Smart Hub password.
Network Services To use the Reset function, follow these steps: 1. In the Account Management menu, select Reset, and then press the ENTER button. The Reset screen appears. 2. Enter the your Security password. This is the password you entered if you set up a BD or DVD Parental rating (See page 41). If you did not, enter 0000. 3. After a few moments, Smart Hub automatically resets. The screen may go black, then Smart Hub re-appears. In a few moments, it starts the re-initialization procedure. 4.
05 The New Folder function lets you create and name new folders. Once you have created a folder, you can move application into it. To use the New Folder function, follow these steps: 1. Press the YELLOW (C) button on your remote. 2. Press the ▲▼◄► to move the cursor to New Folder, and then press the ENTER button. The New Folder window and a keypad appear. 3. Use the keypad to enter the name of the folder, and then press the ENTER button.
Network Services To use the Lock function, follow these steps: 1. Press the YELLOW (C) button on your remote. 2. Press the ▲▼◄► to select a application, and then press the ENTER button. If the application can be locked, the Lock menu item is enabled. 3. Press the ▲▼◄► to select Lock, and then press the ENTER button. The Security window appears. 4. Enter your Parental Security Code (See page 41). If you have not created a Parental Security Code, enter 0000. 5. Press the ENTER button.
05 Sort By Tabs To access Samsung Apps, press the ▲▼◄► buttons to navigate to the Samsung Apps area on the Smart Hub main screen, and then press the ENTER button. The Samsung Apps screen appears. You can access the Sort By tabs on the top of the screen using the ▲▼◄► buttons. Each tab displays the services or applications in the category you chose, sorted by the criteria on the tab (Recommended, Most Downloaded, Most Recent, Name).
Network Services Help BD-LIVE™ If you have questions about Samsung Apps, check Help first. If none of the tips apply, please visit www.samsung.com. Once the product is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc. To use the Help function, follow these steps: 1. Attach a USB memory stick to the USB jack on the front of the product, and then check its remaining memory.
06 Other Information Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the product, disconnect the power cord and contact the nearest authorized dealer or Samsung Electronics Service Centre. Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. The iPod fails to connect.
Other Information Symptom Check/Remedy Aspect ratio cannot be changed. • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. • The product is not working. (Example: The power goes out or a strange noise is heard.) • Press and hold the romote control's STOP ( ) button for 5 seconds in STANDBY mode. • The Product is not working normally.
06 Other Information Symptom Check/Remedy PC Share Manager function I can see folders shared through the PC Share Manager, but I cannot see the files. • Since it shows only files corresponding to the Image, Music, and Movie categories, files that do not correspond to these categories may not be displayed. AllShare function Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded.
Other Information Specifications Weight General FM Tuner 429.3 (W) x 58.4 (H) x 325.1 (D) mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % to 75 % Signal/noise ratio 55 dB Usable sensitivity 12 dB Total harmonic distortion 0.5 % BD (Blu-ray Disc) Reading Speed : 9.834 m/sec DVD (Digital Versatile Disc) Disc 3.5 kg Dimensions CD : 12cm (COMPACT DISC) CD : 8cm (COMPACT DISC) Composite Video Reading Speed : 6.98 ~ 7.68 m/sec. Approx.
06 Other Information 5.1ch speaker system Front Surround Centre Subwoofer Impedance 3Ω 3Ω 3Ω 3Ω Frequency range 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 40Hz ~ 160Hz Output sound pressure level 86dB/W/M 86dB/W/M 86dB/W/M 88dB/W/M Rated input 165W 165W 170W 170W Speaker Maximum input 330W 330W 340W 340W Front : 90 x 141.5 x 68.5 mm Surround : 84 x 104.5 x 68.5 mm Dimensions (W x H x D) Centre : 360 x 74.5 x 68.5 mm Subwoofer : 168 x 350 x 285 mm Front : 0.58 kg, Surround : 0.4 kg Weights Centre : 0.
English Avis Cinavia : This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be in interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com.
Français Avis de Cinavia : Ce produit utilise la technologie Cinavia pour limiter l'utilisation de copies non autorisées de certains films et vidéos commerciaux ainsi que leurs bandes son. Lorsqu'une copie non autorisée est détectée, un message est affiché et la lecture ou la copie est interrompue. Des informations complémentaires concernant la technologie Cinavia sont disponibles sur le site http:// www.cinavia.com du Centre d'information consommateur Cinavia.
Suomi Cinavia-ilmoitus: Tämä tuote käyttää Cinaviatekniikkaa rajoittaakseen joidenkin kaupallisesti tuotettujen elokuvien ja videoiden sekä niiden ääniraitojen luvattomien kopioiden käyttöä. Kun luvattoman kopion kielletty käyttö tunnistetaan, viesti tulee näkyviin ja toisto tai kopiointi keskeytetään. Saat lisätietoja Cinavia-tekniikasta Cinavia Online Consumer Information Centre -kuluttajakeskuksesta osoitteessa http://www.cinavia.com.
Polski Komentarz Cinavia : Urządzenie to korzysta z technologii Cinavia w celu ograniczenia wykorzystania nieupoważnionych kopii pewnych filmów i obrazów wideo wyprodukowanych w celach komercyjnych, oraz ich ścieżek dźwiękowych. W przypadku wykrycia zakazanego użycia nieautoryzowanej kopii, zostanie wyświetlony komunikat i proces odtwarzania i kopiowania zostanie zatrzymany. Więcej informacji o technologii Cinavia można uzyskać w Centrum obsługi klienta Cinavia online: http:// www.cinavia.com.
Hrvatski Obavijest o tehnologiji Cinavia : ovaj proizvod rabi tehnologiju Cinavia kako bi se ograničila uporaba neovlaštenih kopija nekih komercijalno proizvedenih filmova i videozapisa i njihovih zvučnih zapisa. Kada se otkrije zabranjena uporaba neovlaštene kopije, prikazat će se poruka i prekinut će se reproduciranje i kopiranje. Ostale informacije o tehnologiji Cinavia dostupne su u mrežnom informacijskom centru za korisnike tvrtke Cinavia na http://www.cinavia. com.
繁體中文 Cinavia 聲明:本產品使用 Cinavia 技術來限制 使用某些商業製造的電影和視訊及其聲道的未經授權副本。當偵測 到禁止使用的未經授權副本時,將會顯示一則訊息,並且播放或複 製動作將會中斷。 Cinavia 技術的詳細資訊在 Cinavia 線上消費者資訊中心中提供,網址為:http://www. cinavia.com。若要透過郵件請求關於 Cinavia 的其他資訊,請將含有您的郵寄地址的明信片寄往:Cinavia Consumer Information Centre, P.O. Box 86851, San Diego, CA, 92138, USA.
Tiếng Việt Thông báo của Cinavia: Sản phẩm này sử dụng công nghệ Cinavia để hạn chế việc sử dụng các bản sao trái phép một số bộ phim và video được sản xuất thương mại và các đoạn âm thanh của chúng. Khi bị phát hiện sử dụng bản sao trái phép, một thông báo sẽ được hiển thị và việc phát lại hoặc sao chép sẽ bị gián đoạn.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Area ` North America Canada Mexico U.S.A Contact Centre Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.