User manual

English 23
02 Connections
Connecting Audio from External Components
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.
Press the FUNCTION button to select D. IN input.
The mode switches as follows : BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  FM
NOTE
To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.
AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR.
Connect AUX IN (Audio) on the product to the Audio Out of the external analogue component.
Be sure to match connector colours.
Press the FUNCTION button to select AUX input.
The mode switches as follows : BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  FM
NOTE
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of
the VCR to this product.
1.
2.
•
✎



1.
•
2.
•
✎

OPTICAL
HDMI OUT
DIGITAL
AUDIO IN
COMPONENT OUT
FM ANT
WIRELESS
VIDEO OUT
AUX IN
COMPONENT OUT
FM ANT
WIRELE
SS
VIDEO OUT
H
DMI OUT
Optical Cable
(not supplied)
Audio Cable
(not supplied)
If the external analogue
component has only one
Audio Out, connect either
left or right.
Set-Top Box
VCR
WhiteRed
OPTICAL
AUX
HT-D5100_ELS_1224.indd 23HT-D5100_ELS_1224.indd 23 2011-12-24  10:03:332011-12-24  10:03:33