User manual

English 33
03 Setup
Musical Auto Calibration
By setting the Musical Auto Calibration (MAC)
function just once when you relocate or install the
product, you can have the product automatically
recognize the distance between speakers, levels
between channels, and frequency characteristics
to create a 5.1-channel sound fi eld optimized for
your environment.
500mA
ASC IN
500
mA
A
S
C
I
N
ASC
microphone
Musical Auto Calibration Mode
You will hear either the Musical Auto Calibration
mode or the User Speaker Settings.
Off: You will hear sound in the the Speaker
Setting value.
On: You will hear sound in the Musical Auto
Calibration mode.
Measurement
Plug the ASC microphone into the ASC IN jack.
Place the ASC microphone at the listening position.
Musical Auto Calibration will be automatically
set up in the following sequence:
Front L  Center  Front R  Surround
R  Surround L  Subwoofer
Press the RETURN button to cancel the
Musical Auto Calibration Setting.
•
•
1.
2.
•
•
NOTE
Setting the Musical Auto Calibration function
takes about 3 minutes.
The Musical Auto Calibration setup can be
made when there is no disc in the product.
If the ASC microphone is disconnected during
the Musical Auto Calibration setup, the setup
will be cancelled.
When the Musical Auto Calibration function is
activated, the DSP, Dolby Pro Logic ll and SFE
Mode will not work.
If the product is connected to external devices
or other components (such as an iPod, AUX,
D. IN), the Musical Auto Calibration Setup may
not work properly.
Noise may result in wrong measurement. So
please proceed with the measurement in a
quiet room to obtain proper calibration.
Place the microphone on the main listening
position.
Nothing should get in the way between
speakers and microphone.
Note that the test tone of the speaker may be
loud when conducting the test.
Do not place the microphone behind the
furniture or too close to the wall. Otherwise, it
can produce an incorrect test result.
User EQ
You can confi gure the equalizer settings manually
to your preference.
Settings
Display
Audio
Network
System
Language
Security
General
Support
User EQ
Reset > Adjust < Move ' Return
6
·
·
·
·
·
0
·
·
·
·
·
-6
0
250Hz
0
600Hz
0
1kHz
0
3kHz
0
6kHz
0
10kHz
0
15kHz
A
✎










HT-D5100_ELS_1224.indd 33HT-D5100_ELS_1224.indd 33 2011-12-24  10:03:442011-12-24  10:03:44