HT-D5200 2.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-D5200_ELS_1226.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous CAUTION : TO PREVENT ELECTRIC voltage” inside the product that presents SHOCK, MATCH WIDE BLADE OF PLUG a risk of electric shock or personal injury. TO WIDE SLOT, FULLY INSERT.
Precautions • Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. • Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). • Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered. • Do not stack anything on top of the product. • Before moving the product, ensure the Disc Insert Hole is empty.
Safety Information Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Holding discs • Do not touch the playback side of the disc. • Hold the disc by the edges so that fingerprints will not get on the surface. • Do not stick paper or tape on the disc. Disc Storage • Do not keep in direct sunlight • Keep in a cool ventilated area • Keep in a clean Protection jacket.
Contents Safety Warnings Precautions Cautions on Handling and Storing Discs Licence Copyright GETTING STARTED 7 8 12 13 13 14 15 Icons that will be used in manual Disc Types and Characteristics Accessories Description Front Panel Rear Panel Remote Control CONNECTIONS 17 18 19 21 22 23 Connecting the Speakers Connecting External Devices/your TV via HDMI Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit Connecting Audio from External Components Connecting to the Network Connecting t
Contents SETUP 38 38 38 38 38 38 38 39 39 40 Security BD Parental Rating DVD Parental Rating Change Password General Front Display Network Remote Control Support Software Upgrade Contact Samsung BASIC FUNCTIONS 41 41 42 42 43 43 44 46 48 49 50 51 53 53 54 Playing a Disc Using the Disc menu / Title menu / Popup menu Playing the Title List Using the Search and Skip Functions Slow Motion Play/Step Motion Play Repeat Playback Using the TOOLS button Listening to Music Sound Mode Playing back a Picture Playi
01 Getting Started Getting Started Icons that will be used in manual Make sure to check the following terms before reading the user manual. Term Logo Icon h z Z BD-ROM BD-RE/-R DVD-VIDEO Definition This involves a function available on a BD-ROM. This involves a function available on a BD-RE/-R disc recorded in the BD-RE format. This involves a function available on a DVD-VIDEO.
Getting Started Disc Types and Characteristics Logos of Discs that can be played Blu-ray Disc Compatibility Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual. Blu-ray Disc 3D Blu-ray Disc Dolby Digital Plus PAL broadcast system in U.K, France, Germany, etc.
01 BD-RE/-R Both the product and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. This Blu-ray disc can be recorded and played back. This product can play back a BD-RE/-R disc recorded by other compatible Blu-ray disc recorders. Getting Started Region Code DVD-VIDEO Disc Type Region Code Area A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
Getting Started Disc Format Using JPEG disc • CD-R/-RW, DVD-RW/-R recorded with UDF or JOLIET format can be played back. • Only JPEG files with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed. • Progressive JPEG is supported. DVD-RW/-R (V) • This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by this product once it has been finalized.
01 Container *.vro VRO VOB Video Codec Audio Codec Resolution MPEG2 AC3 MPEG LPCM 1920x1080 AC3 MPEG LPCM AAC 352x288 MPEG1 MPEG1 *.mpg *.mpeg MPEG2 PS H.264 1920x1080 1920x1080 AC3 AAC MP3 DD+ HE-AAC MPEG2 *.ts *.tp *.trp 352x288 H.264 TS VC1 Getting Started File Extension 1920x1080 1920x1080 1920x1080 Restrictions • • • • • Some of the Codecs above listed are not supported if having a problem with the contents.
Getting Started Notes on USB connection Supported devices: USB storage media, MP3 player, digital camera, USB card reader 1) Does not support if a folder or file name is longer than 125 characters. 2) A subtitle file bigger than 300 KB may not be properly displayed. 3) A certain USB/digital camera device may not be compatible with the product. 4) FAT16 and FAT32 file systems are supported. 5) Photo (JPEG), music (MP3) and video file should have their names in Korean or English.
01 Getting Started Description Front Panel 1 2 3 4 5 6 7 8 9 10 11 5V 500mA 1 POWER BUTTON ( 2 FUNCTION BUTTON The mode switches as follows : BD/DVD D. IN AUX R. IPOD H. IN1 H. IN2 FM 3 DISPLAY Displays the playing status, time, etc. 4 5 6 STOP BUTTON Stops disc playback. PLAY/PAUSE BUTTON Plays a disc or pauses playback. ENTER BUTTON Selects menu items or starts a Blu-ray disc. (It will not start a DVD disc.) 7 8 9 10 EJECT BUTTON Ejects a Disc.
Getting Started Rear Panel 1 2 3 4 5 6 HDMI OUT HDMI IN 7 8 FM ANT 9 10 11 COMPONENT OUT 12 SPEAKERS OUT FRONT LAN iPod DIGITAL AUDIO IN OPTICAL WIRELESS LAN SUBWOOFER FRONT AUX IN VIDEO OUT SPEAKER IMPEDANCE : 3 1 WIRELESS LAN JACK Can be used for network based services (see pages 55~64), BD-LIVE and software upgrade with a wireless LAN adapter. 2 LAN TERMINAL Can be used for network based services (see pages 55~64), BD-LIVE and software upgrade under the network connection.
01 Getting Started Remote Control Tour of the Remote Control FUNCTION TV SOURCE POWER Turn the product on and off. If you want to change to TV mode, press the TV button. If you want to change to Home Cinema, press the BD button. Press numeric buttons to operate options. RECEIVER BD SLEEP Set a Sleep time to shut off the product. TA To eject the disc. TV RDS DISPLAY 1 2 3 PTY- PTY SEARCH PTY+ 4 5 6 7 8 REPEAT 0 Press this to see the full screen on a TV.
Getting Started Installing batteries in the Remote Control * Battery size: AAA TV Brand Code List Brand Code Brand Code Admiral (M.Wards) 56, 57, 58 Mitsubishi/ MGA 18, 40, 59, 60, 75 A Mark 01, 15 MTC 18 NEC 18, 19, 20, 40, 59, 60 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Nikei 03 Onking 03 01, 18, 40, 48 Onwa 03 Panasonic 06, 07, 08, 09, 54, 66, 67, 73, 74 AOC ✎ NOTE Make sure to match the “+” and “–” ends of Bell & Howell (M.
02 Connections Connections This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Position of the product Place it on a stand or cabinet shelf, or under the TV stand. SW Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Connections Connecting The Speakers 1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab. 3. Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks.
02 corresponding Video output (HDMI, Component or Composite) on your product. See your TV owner's manual for more information on how to select the TV's Video Input source. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select HDMI as the external source of the TV. You must have an HDMI connection to enjoy videos with 3D technology. A long HDMI cable may cause a screen noise. If this is the case, set Deep Colour to Off in the menu.
Connections Red Blue Green COMPONENT OUT SPEAKERS OUT METHOD 1 FRONT Yellow SUBWOOFER AUX IN VIDEO OUT FRONT METHOD 2 SPEAKER IMPEDANCE : 3 METHOD 1 : Component Video (BETTER QUALITY) If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (PR, PB and Y) Jacks on the back of the product to the Component Video Input Jacks on your TV.
02 Connections Connecting Audio from External Components COMPONENT OUT FM ANT DIGITAL AUDIO IN HDMI OUT HDMI IN OPTICAL AUX IN Red VIDEO O White Optical Cable (not supplied) Set-Top Box Audio Cable (not supplied) If the external analogue component has only one Audio Out, connect either left or right. VCR OPTICAL AUX OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1.
Connections Connecting to the Network This product enables you to view network based services (See pages 55~64) such as Smart Hub and BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend using an Wireless router or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Cable Network 1.
02 You can connect to the network with a Wireless IP sharer. 1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the Wireless LAN Adapter on the rear panel of the product. 2. Set the network options.
Setup Initial Settings 1. Turn on your TV after connecting the product. When you connect and turn on the product to a TV for the first time, the Initial Settings screen appears. • Home Menu My Contents Videos Photos Music Function My Devices Internet Settings Initial Settings | On-Screen Language Select a language for the on-screen displays.
03 DISC MENU MENU 3. Press the ▲▼ buttons to select the desired submenu, and then press the ENTER button. TITLE MENU POPUP 1 TOOLS Setup 2. Press the ◄► buttons to select Settings, and then press the ENTER button. Accessing the Settings Menu INFO 4. Press the ▲▼ buttons to select the desired item, and then press the ENTER button. 3 5. Press the EXIT button to exit the menu.
Setup Depending on the content and the position of Display You can configure various display options such as the TV Aspect Ratio, Resolution, etc. 3D Settings Screen Size Select whether to play a Blu-ray Disc with 3D contents in 3D Mode.
03 BD Wise (Samsung Products only) Depending on the type of television you have, you may want to adjust the screen size setting. BD Wise is Samsung’s latest inter-connectivity feature. When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the BD/DVD disc.
Setup Resolution according to the output mode • Blu-ray Disc/E-contents/Digital Contents playback HDMI / connected HDMI / not connected HDMI Mode Output Component Mode Blu-ray Disc E-contents/ Digital contents Component/ VIDEO Mode Blu-ray Disc E-contents/ Digital contents VIDEO Mode BD Wise Resolution of Blu-ray Disc 1080p@60F 576i/480i - - - Auto Max. Resolution of TV input Max.
03 If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after the selection, please wait for 15 seconds. And then, the resolution will be reverted to the previous value automatically. Would you like to make a selection?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
Setup Audio If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front and subwoofer speakers. Speaker Settings Speaker Display Audio | Level Network Distance • You can set the Speaker Distance between 1ft(0.3m) and 30ft(9.0m). Distance System Language Settings Security Display General Audio Support > Move " Enter ' Return Network System Distance 10(ft) 3.0(m) | : 10(ft) 3.0(m) : 10(ft) 3.
03 The audio signals transmitted over the HDMI Cable can be toggled On/Off. • Off : Video is transmitted over the HDMI connection cable only, and audio is output through your product speakers only. • On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. ✎ NOTE HDMI Audio is automatically down-mixed to 2ch for TV speakers. Audio Return Channel You can enjoy TV sound from the Home Cinema speakers by using just one HDMI cable.
Setup Digital Output Selection Setup PCM Bitstream (Unprocessed) Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) HDMI supported HDMI supported HDMI supported HDMI supported AV receiver AV receiver AV receiver AV receiver Connection PCM Up to 7.1ch PCM DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Up to 7.1ch Dolby Digital DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Plus Up to 7.
03 Setup Wired Network Audio Sync Video may look slower than the audio when the product is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. • You can set the audio delay time between 0 msec and 300 msec. Set it to the optimal status. Setting Up a Wired Connection - Auto 1. Press the ▲▼ buttons to select Wired. Settings Audio Network System Network Before you begin, contact your ISP to find out if your IP address is static or dynamic.
Setup To enter the Network settings into your product, follow these steps: Wireless Network 1. Press the ▲▼ buttons to select Wired, and then press the ENTER button. • Wireless (General) 2. Press the ◄► buttons to select IP Settings, and then press the ENTER button. • One Foot Connection IP Settings Display IP Mode Network IP Address System Subnet Mask Language Security Manual 0 . 0 . 0 . 0 0 . 0 . 0 . 0 0 . 0 . 0 . 0 Gateway DNS Mode Manual 0 . 0 . 0 .
03 Settings Display Audio Network Settings Enter security key. 0 entered To enter the Network settings into your product, follow these steps: Setup 4. On the Security screen, enter your network’s Pass Phrase. Enter numbers directly using your remote control. To select a letter, press the ▲▼◄► buttons to move the cursor, then press the ENTER button. 1. Follow Steps 1 through 5 in the ‘Setting Up the Wireless Network Connection - Auto’ procedure. 2.
Setup WPS(PBC) 2. Press the ENTER button. The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function. If your wireless router has a WPS(PBC) button, follow these steps: 1. Press the ▲▼ buttons to select WPS(PBC). Settings Network Settings Display Select a network connection type. Audio Network 3. Place the Samsung Wireless Router within 25 cm (10 inches) of Samsung Wireless LAN Adapter to connect. 4.
03 Initial Settings By using the Initial Settings function, you can set the language, Network Settings, etc. For more information about the Initial Settings function, refer to the Initial Settings section of this user manual. (See page 24) Anynet+ (HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature. To operate this function, connect this product to a Samsung TV with an HDMI cable.
Setup Reset Change Password All settings will revert to the default except for the network and Smart Hub settings. You need enter the password for this function. Change the 4-digit password used to access security functions. ✎ NOTE The default password is 0000. Language You can select the language you prefer for the Home menu, disc menu, etc. • On-Screen Menu : Select the language for the on-screen displays. • Disc Menu : Select the language for the disc menu displays.
03 7. Follow the instructions that came with the application to control the product. ✎ NOTE Your product must be connected to the Setup 6. If this is the first time you are using the function, it will ask you to allow or deny remote control of the product. Select Allow. Internet to use the By Internet function. The upgrade is complete when the product turns off, and then turns on again by itself.
Setup By Disc To upgrade by Disc, follow these steps: 1. Visit www.samsung.com/bluraysupport. ✎ NOTE When the system upgrade is done, check the software details in the software Upgrade menu. 2. Download the latest disc software upgrade zip archive to your computer. Do not turn off the product during the software 3. Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file. To use the Via download function, your 4. Write the folder onto a disc.
04 Basic Functions track 1 track 2 track 3 track 4 track 5 Playback 1. Insert a disc into the disc slot with the disc's label facing up. 2. Press the PLAY (►) button. PLAY ( ►) Starts playback. STOP ( ) Stops playback. • If you press the button once : The stop position is memorized. • If you press the button twice : The stop position is not memorized.
Basic Functions Using the Title Menu Using the Search and Skip Functions Z 1. During playback, press the TITLE MENU button on the remote control. 2. Press the ◄ ► buttons to make the desired selection, then press the ENTER button. TITLE MENU POPUP Searching for a Desired Scene hzZyx ✎ NOTE Depending on the disc, the menu items may differ and this menu may not be available. The Title Menu will only be displayed if there are at least two titles on the disc. Using the Popup Menu h 1.
04 Repeat Basic Functions Slow Motion Play/Step Motion Play > Off Slow Motion Play hzZyx • In pause ( ) mode, press the SEARCH () button. If you press the SEARCH () button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 • To return to normal speed playback, press the PLAY (► ) button. ✎ NOTE 3. To return to normal play, press the REPEAT button again. 4. Press the ▲▼ buttons to select Off, the press the ENTER button. ✎ NOTE Depending on the disc, the Repeat function may not be available.
Basic Functions Information about the primary / secondary Using the TOOLS button During playback, you can operate disc menu by pressing the TOOLS button. TOOLS • TOOLS Menu Screen Tools Title Search Chapter Search Time Search Picture Settings Audio User EQ Subtitle Angle 1/2 : 1/20 : 00:00:13/01:34:37 : Normal : 1/4 ENG Multi CH : : mode will be also displayed if the Blu-ray Disc has a BONUSVIEW section. Use the ◄► button to switch between primary and secondary audio modes.
04 x • You must have some experience with video extraction and editing in order to use this feature properly. • To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi • Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.
Basic Functions Listening to Music 7 ENTER button : Plays the selected track. 8 ► button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist. ◄ button : During playback, moves to the previous page in the Music List or moves to the previous track in the Playlist. 9 STOP button : Stops a track. 0 $ button : Plays the next track. ! # button : Plays the previous track.
04 Repeat an Audio CD (CD-DA)/MP3 1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc slot. • For an Audio CD (CD-DA), the first track will be played automatically. • For an MP3 disc, press the ◄► buttons to select Music, then press the ENTER button. 1. During the Playlist playback, press the REPEAT button. Audio CD (CD-DA)/MP3 Screen Elements 1 2 3 REPEAT 2. Select the desired play mode by pressing the REPEAT button repeatedly.
Basic Functions Audio CD | Music Sound Mode 1/2 Page Selected Items : 3 TRACK 001 TRACK 002 00:43 03:56 TRACK 003 TRACK 004 04:41 04:02 TRACK 005 TRACK 006 03:43 03:40 TRACK 007 TRACK 008 04:06 03:52 Close Edit Mode ( ) Page Tools DSP(Digital Signal Processor) Function You can select mode to optimize the sound for sound based on your tastes. DSP Press the DSP button. " Select ' Return 5. Select a desired track and press the TOOLS button. 6.
04 Playing back a Picture If you insert your iPod player in the iPod Dock that has already been connected to the system, the video files in your iPod player can be played through the connected TV. If the video signal does not synchronize properly with the audio signal, press iPod SYNC on the remote control to correct the synchronization. B ✎ NOTE Before you can play the video files in iPod player, the Audio/Video terminals of the TV should be connected using the Composite cable.
Basic Functions • Background Music : Select this if you want to listen to music while viewing a picture. • Background Music Setting : Select this if you want to set the background music setting. • Zoom : Select this if you want to enlarge the current picture. (Enlarged up to 4 times) • Rotate : Select this if you to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.) • Picture Settings : Select this if you want to adjust the picture quality.
04 Using buttons on the Remote Control 1. Press the FUNCTION button to select FM. 2. Tune in to the desired station. • Preset Tuning 1 : You must first add a desired frequency as a preset. Press the STOP () button to select PRESET and then press the ) button to select the preset TUNING/CH ( station. • Manual Tuning : Press the STOP () button to select MANUAL and then press the TUNING/ ) button to tune in to a lower or higher CH ( frequency.
Basic Functions To show the RDS signals To search for a program using the PTY You can see the RDS signals the station sends on the display. codes Press the RDS DISPLAY button while listening to an FM station. RDS DISPLAY 1 • Each time you press the button, the display change to show you the following information : PS NAME RT CT Frequency PS (Program Service) While searching, appears and then the station names will be displayed. appears if no signal is sent.
04 My Contents If the system is connected to iPod/iPhone, you can play music in iPod/iPhone using the system. Videos Connected Device Photos iPod 5V 500mA Function Music My Devices Internet d WPS(PBC) 1. Connect iPod/iPhone using the USB cable to the front USB port. • Your iPod is automatically turned on. • “iPod” message appears on the TV screen. 2. Press the ENTER button. 3. Select the music file to play.
Basic Functions 6. Select the video file to play. - You can use the remote control or the product to control simple playback functions such as the PLAY, PAUSE, STOP, # /$ and /buttons. (See page 15.) ✎ NOTE You must have the VIDEO output (Composite) connected to your TV to view iPod video (See page 20). If you want to iPod video via VIDEO output, set Anynet+ (HDMI-CEC) to off. No other screen than the playback one will appear on the TV screen. Check other screens on the iPod player.
05 Network Services Read the following instructions before using any network service. 1. Connect the product to the network. (see pages 22~23) 2. Configure the network settings. (see pages 33~36) 3. The Smart Hub screen appears. ✎ NOTE Certain applications are available only in certain countries. Network Services You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the product to your network. 4. The Terms of Service Agreement screen appears.
Network Services Smart Hub at a Glance 1 2 3 4 6 7 My Applications : Displays your personal gallery of applications which you can add to, modify, and delete. 5 Search Your Video Navigation Help : Displays the remote control buttons you can use to navigate in Smart Hub. • RED (A) : To log in to Smart Hub. • GREEN (B) : To sort the applications. • YELLOW (C) : To edit the applications. • BLUE (D) : To change the settings of Smart Hub.
05 Creating an Account Through your remote, you can use the OnScreen Keypad to enter letters, numbers, and symbols. To establish your own, exclusive, configuration of Smart Hub, create your own Smart TV Account. To create an account, follow these steps: 1. 1 1 2 3 .,– abc def 4 5 6 ghi jkl mno 7 8 9 pqrs tuv wxyz Shift Press the RED (A) button on your remote control. The Login screen appears.
Network Services 8. When done, press the ENTER button to select OK, and then press the ENTER button again. The Login screen re-appears. 2. Select the Down Arrow next to the Smart TV ID field, and then press the ENTER button. 9. Select Confirm password, and then press the ENTER button. 3. Select your ID from the list that appears, and then press the ENTER button. The Login screen re-appears. 4. Select Password, and then press the ENTER button. The Password window and a keypad appears. 5.
05 Change Password If you have existing accounts with any of the providers listed by the Register Service Account function, you can associate the provider account and the provider account password with your Smart TV Account. If you associate the account, you will be able to log onto the account through Smart Hub easily, without entering your account name or password. The Change Password function lets you change your Smart Hub password.
Network Services To use the Reset function, follow these steps: 1. In the Account Management menu, select Reset, and then press the ENTER button. The Reset screen appears. 2. Enter the your Security password. This is the password you entered if you set up a BD or DVD Parental rating (See page 38). If you did not, enter 0000. 3. After a few moments, Smart Hub automatically resets. The screen may go black, then Smart Hub re-appears. In a few moments, it starts the re-initialization procedure. 4.
05 The New Folder function lets you create and name new folders. Once you have created a folder, you can move application into it. To use the New Folder function, follow these steps: 1. Press the YELLOW (C) button on your remote. 2. Press the ▲▼◄► to move the cursor to New Folder, and then press the ENTER button. The New Folder window and a keypad appear. 3. Use the keypad to enter the name of the folder, and then press the ENTER button.
Network Services Lock Delete The Lock function lets you lock some application in My Applications so they can not be opened without entering the Parental Security Code. The Delete function lets you delete application from My Applications. To use the Delete function, follow these steps: To use the Lock function, follow these steps: 1. Press the YELLOW (C) button on your remote. 2. Press the ▲▼◄► to select a application, and then press the ENTER button. 3.
05 To download for pay apps, you need to create a Samsung Account and add a credit card to the account. To create a Samsung account, please visit www. samsung.com ✎ NOTE This service may not provided in some countries. Accessing the Samsung Apps Screen To access Samsung Apps, press the ▲▼◄► buttons to navigate to the Samsung Apps area on the Smart Hub main screen, and then press the ENTER button. The Samsung Apps screen appears.
Network Services Help BD-LIVE™ If you have questions about Samsung Apps, check Help first. If none of the tips apply, please visit www.samsung.com. Once the product is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc. To use the Help function, follow these steps: 1. Attach a USB memory stick to the USB jack on the front of the product, and then check its remaining memory.
06 Other Information Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the product, disconnect the power cord and contact the nearest authorized dealer or Samsung Electronics Service Centre. Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. The iPod fails to connect.
Other Information Symptom Check/Remedy Aspect ratio cannot be changed. • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. • The product is not working. (Example: The power goes out or a strange noise is heard.) • Press and hold the romote control's STOP ( ) button for 5 seconds in STANDBY mode. • The Product is not working normally.
06 Other Information Symptom Check/Remedy PC Share Manager function I can see folders shared through the PC Share Manager, but I cannot see the files. • Since it shows only files corresponding to the Image, Music, and Movie categories, files that do not correspond to these categories may not be displayed. AllShare function Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded.
Other Information Specifications Weight Dimensions Operating Temperature Range Operating Humidity Range Signal/noise ratio Usable sensitivity Total harmonic distortion BD (Blu-ray Disc) 3.5 kg 429.3 (W) x 58.4 (H) x 325.1 (D) mm General +5°C to +35°C 10 % to 75 % 55 dB FM Tuner 12 dB 0.5 % Reading Speed : 9.834 m/sec Reading Speed : 6.98 ~ 7.68 m/sec. DVD (Digital Versatile Disc) Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Contact Centre Area ` North America Canada Mexico U.S.A Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
HT-D5200 Système Home Entertainment Blu-ray™ 2,1 canaux Manuel d'utilisation imaginez les possibilités Merci d'avoir acheté ce produit Samsung. Pour obtenir notre service complet, veuillez enregistrer votre produit sur www.samsung.com/register HT-D5200_FRA_1226.
Consignes de sécurité Avertissements de sécurité POUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE RETIREZ JAMAIS LE CAPOT (NI L’ARRIÈRE). LES PIÈCES DE CE PRODUIT NE SONT PAS RÉPARABLES PAR L’UTILISATEUR. VEUILLEZ CONTACTER UN TECHNICIEN QUALIFIÉ POUR TOUTE RÉPARATION. ATTENTION RISQUE D’ÉLECTROCUTION NE PAS OUVRIR Ce symbole indique la présence d’une tension dangereuse dans l’appareil, présentant un risque d’électrocution ou de blessures.
Précautions • Assurez-vous que l'alimentation en c.a. de votre habitation est conforme à la plaque d'identification située au dos de votre appareil. • Posez votre appareil à plat sur un meuble stable en veillant à laisser un espace de 7,5 à 10 cm autour de l'appareil afin d’assurer sa ventilation correcte. • Ne le posez pas sur des amplificateurs ou autre appareil qui risque de chauffer. Veillez à ne pas obstruer les orifices de ventilation. • Ne posez rien sur l’appareil.
Consignes de sécurité Manipulation et rangement des disques - Précautions De petites éraflures sur un disque risquent de réduire la qualité du son et de l’image ou de les faire sauter. Prenez garde à ne pas rayer les disques lorsque vous les manipulez. Manipulation des disques • Ne touchez pas la face de lecture du disque. • Tenez le disque par les tranches afin de ne pas laisser de traces de doigts sur la surface. • Ne collez pas de papier ou de ruban adhésif sur le disque.
Table des matières Avertissements de sécurité Précautions Manipulation et rangement des disques - Précautions Licence Droit d’auteur PRISE EN MAIN 7 7 8 12 13 13 14 15 Icônes utilisées dans ce guide Types de disques et caractéristiques Accessoires Description Panneau avant Panneau arrière Télécommande BRANCHEMENTS 17 18 21 22 23 Connexion des enceintes Connexion de périphériques externes et du téléviseur via l’interface HDMI Fixation du noyau torique en ferrite au cordon d’alimentation de l’unité pr
Table des matières CONFIGURATION 38 38 38 38 38 38 38 39 39 40 Sécurité Contrôle parent. BD Contrôle parent. DVD Modif.
01 Prise en main Prise en main Icônes utilisées dans ce guide Assurez-vous de consulter les définitions des termes suivants avant de lire le guide d’utilisation. Terme Logo Icône h z Z BD-ROM BD-RE/-R DVD-VIDEO Définition Indique une fonction disponible sur les BD-ROM. Indique une fonction disponible sur les BD-RE/-R enregistrés au format BD-RE. Indique une fonction disponible sur les DVD vidéo.
Prise en main Types de disques et caractéristiques Logos des disques pouvant être lus Compatibilité des disques Blu-ray Le disque Blu-ray est un nouveau format, en constante évolution. Par conséquent, il existe des problèmes de compatibilité qui y sont associés. Tous les disques ne sont pas uniformément compatibles et la lecture de certains de ces supports peut s’avérer être impossible.
BD-RE/-R L’appareil et les disques possèdent des codes régionaux. Ces codes régionaux doivent correspondre pour pouvoir lire un disque. S’ils sont différents, le disque ne peut pas être lu. Les disques Blu-ray RE/-R peuvent être lus et enregistrés. Ce produit peut lire un disque BD-RE/-R enregistré sur d'autres enregistreurs de disques Blu-ray compatibles.
Prise en main Format du disque Utilisation d'un disque JPEG • Les CD-R/-RW, DVD-RW/-R enregistrés au format UDF ou JOLIET peuvent être lus. • Seuls les fichiers ayant les extensions « .jpg », « .JPG », « .jpeg » ou « JPEG » peuvent être affichés. • Le JPEG progressif est pris en charge. DVD-RW/-R (V) • Il s’agit d’un format utilisé pour l’enregistrement de données sur un disque DVD-RW ou DVD-R ; une fois finalisé, le disque peut être lu par l'appareil.
01 *.vro Conteneur VRO VOB Codec vidéo Codec audio Résolution MPEG2 AC3 MPEG LPCM 1920x1080 AC3 MPEG LPCM AAC 352x288 MPEG1 MPEG1 *.mpg *.mpeg MPEG2 PS H.264 1920x1080 1920x1080 AC3 AAC MP3 DD+ HE-AAC MPEG2 *.ts *.tp *.trp 352x288 H.264 TS VC1 Prise en main Extension de fichier 1920x1080 1920x1080 1920x1080 Restrictions • Certains codecs répertoriés ci-dessus ne sont pas pris en charge en cas de problème liés aux contenus.
Prise en main Notes sur la connexion USB Périphériques pris en charge: Support de stockage USB, lecteur MP3, caméra numérique, lecteur de carte USB 1) Prise en charge non assurée pour les dossiers ou fichiers dont le nom excède 125 caractères. 2) Un fichier de sous-titre supérieur à 300 Ko ne peut pas s’afficher correctement. 3) Le produit n’est pas compatible avec tous les périphériques de caméra numérique / USB. 4) Les systèmes de fichiers FAT16 et FAT32 ne sont pas pris en charge.
01 Prise en main Description Panneau avant 1 2 3 4 5 6 7 8 10 9 11 5V 500mA 1 TOUCHE DE MISE EN MARCHE/ARRÊT ( 2 TOUCHES DE FONCTION Le mode change dans l’ordre suivant : BD/DVD D. IN AUX R. IPOD H. IN1 H. IN2 FM 3 4 5 ÉCRAN D’AFFICHAGE Permet d’afficher l’état de la lecture, l’heure, etc. BOUTON ARRÊT Permet d’interrompre la lecture du disque. BOUTON LECTURE/PAUSE Permet de lire un disque ou de suspendre la lecture.
Prise en main Panneau arrière 1 2 3 4 5 6 HDMI OUT HDMI IN 7 8 9 10 11 COMPONENT OUT FM ANT 12 SPEAKERS OUT FRONT LAN iPod DIGITAL AUDIO IN OPTICAL WIRELESS LAN SUBWOOFER FRONT AUX IN VIDEO OUT SPEAKER IMPEDANCE : 3 1 PRISE WIRELESS LAN (LAN SANS FIL) Permet d’accéder aux services réseau (voir pages 55~64), à la fonctionnalité BD-LIVE et aux mises à niveau logicielles via un adaptateur LAN sans fil.
01 Prise en main Télécommande Boîtier de la télécommande Permet de mettre l’appareil sous et hors tension. Si vous souhaitez passer en mode TV, appuyez sur le bouton TV. Si vous souhaitez passer au Home cinéma, appuyez sur le bouton BD. Appuyez sur les touches numériques pour activer les options. FUNCTION TV SOURCE POWER RECEIVER SLEEP BD TV TA RDS DISPLAY 1 2 3 PTY- PTY SEARCH PTY+ 4 5 6 7 8 REPEAT 0 Permet d'arrêter/de démarrer la lecture d'un disque.
Prise en main Installation des piles dans la télécommande * Type de piles : AAA Liste des codes par marque de téléviseur Marque Code Marque Code Admiral (M.
02 Branchements Connexion des enceintes Branchements Cette section décrit différentes méthodes de connexion de l’appareil aux autres périphériques externes. Avant de déplacer ou d'installer l'appareil, assurez-vous de le mettre hors tension et de débrancher le cordon d'alimentation. Position de l’appareil Placez-le sur un pied, sur la tablette d'un meuble, ou sous le support du téléviseur.
Branchements Connexion des enceintes 1. Appuyez sur la languette de la borne située à l’arrière de l'enceinte. 2. Insérez le fil noir dans la borne noire (–) et le fil rouge dans la borne rouge (+), puis relâchez la languette. 3. Branchez les fiches de contact situées à l’arrière du produit en faisant concorder les couleurs des fiches et des prises d’enceinte.
02 corresponde à la sortie vidéo (HDMI, composante ou composite) du produit. Reportez-vous au manuel d’utilisation du téléviseur pour de plus amples informations sur la méthode de sélection de la source d’entrée vidéo du téléviseur. Si vous avez réglé la télécommande du produit de manière à ce qu'elle fonctionne avec le téléviseur, appuyez sur le bouton TV SOURCE de la télécommande et sélectionnez HDMI comme source externe du téléviseur.
Branchements Rouge Vert Bleu COMPONENT OUT SPEAKERS OUT MÉTHODE 2 FRONT Jaune SUBWOOFER FRONT AUX IN VIDEO OUT SPEAKER IMPEDANCE : 3 MÉTHODE 3 MÉTHODE 1 : Vidéo en composante (BONNE QUALITÉ) Si votre téléviseur est doté de prises d'entrée vidéo en composante, branchez les fiches d’une des extrémités d’un câble vidéo en composante (non compris) aux prises de sortie vidéo en composante (PR, PB et Y) situées à l’arrière du produit, puis branchez les fiches de l’autre extrémité aux prises d'entrée vid
02 Branchements Connexion audio de composants externes COMPONENT OUT FM ANT DIGITAL AUDIO IN HDMI OUT HDMI IN OPTICAL AUX IN VIDEO O Rouge Câble optique (non fourni) Boîtier décodeur Câble audio (non fourni) Si le composant analogique externe ne possède qu'une prise Audio Out (Sortie audio), branchez le câble à gauche ou à droite.
Branchements Connexion au réseau Ce produit vous permet de visionner les services basés sur le réseau (voir pages 55~64) tels que Smart Hub ou BD-LIVE, et de recevoir les mises à niveau logicielles lorsque la connexion au réseau est établie. Nous vous recommandons d’utiliser un routeur sans fil ou un routeur IP pour les besoins de la connexion.
02 Vous pouvez établir la connexion au réseau au moyen d’un dispositif de partage IP sans fil. 1. Un routeur sans fil AP/IP est nécessaire pour la connexion au réseau sans fil. Connectez l’adaptateur LAN sans fil à la prise de l’adaptateur LAN sans fil situé sur le panneau arrière du produit. 2. Pour régler les options de configuration de réseau, reportez-vous à la page 33.
Configuration Paramètre initial 1. Allumez le téléviseur après avoir branché le produit. Lors de sa première connexion au téléviseur, le produit s'allume automatiquement et l'écran Paramètres initiaux apparaît. • Menu Accueil Mon contenu Vidéos Photos Musique Fonction Mon périph. Internet Paramètres Initial Settings | On-Screen Language Select a language for the on-screen displays.
03 DISC MENU MENU TITLE MENU 3. Appuyez sur les boutons ▲▼ pour sélectionner le sous-menu souhaité, puis appuyez sur le bouton ENTRÉE. POPUP 1 TOOLS INFO 4. Appuyez sur les boutons ▲▼ pour sélectionner l'élément souhaité, puis appuyez sur le bouton ENTRÉE. 3 2 RETURN 4 EXIT 5. Appuyez sur le bouton EXIT pour quitter le menu. TUNER 1 Bouton MENU : Appuyez sur ce bouton pour accéder au menu Accueil. 2 Bouton RETURN : Permet de revenir au menu précédent.
Configuration Selon le contenu et le positionnement de l'image Affichage Vous pouvez configurer les diverses options d'affichage telles que Format image, Définition, etc. Paramètres 3D sur l'écran de votre téléviseur, vous pouvez voir apparaître des barres verticales noires à droite ou à gauche de l'écran ou sur les deux côtés à la fois. Taille écran Vous pouvez choisir de lire ou non un disque Bluray comportant des contenus 3D en mode 3D.
03 BD Wise (Produits Samsung uniquement) Selon le type de téléviseur que vous possédez, vous pouvez ajuster le réglage de la taille de l'écran. BD Wise est la fonctionnalité d’interconnectivité de Samsung la plus récente.
Configuration Résolution selon le mode de sortie • Lecture du disque Blu-ray/des e-contenus/des contenus numériques HDMI / connecté Sortie Mode HDMI HDMI / non connecté Mode Composante Mode Composante/ VIDÉO Disque Blu-ray E-content/ Contenus numériques Mode VIDÉO Disque Blu-ray E-content/ Contenus numériques BD Wise Résolution du disque Blu-ray 1080p/60F 576i/480i - - - Auto Résolution optimale de l'entrée du téléviseur Résolution optimale de l'entrée du téléviseur 576i/480i - - - 108
03 Si le téléviseur connecté au produit ne prend pas en charge la fonction Fréquence cinéma ou la résolution sélectionnée, le message suivant apparaîtra : « Si aucune image ne s'affiche après la sélection, veuillez patienter 15 secondes. La résolution reprend ensuite automatiquement la valeur précédente. Souhaitez-vous faire une sélection ? ».
Configuration Audio Param. haut-parleur Paramètres Param. haut-parleur Affichage Audio | Niveau Réseau Distance Système Distance Si les enceintes ne peuvent être positionnées à égale distance du point d’écoute, vous pourrez régler le délai d’attente des signaux audio émis depuis les enceintes avant et le caisson de graves. • La distance entre les enceintes peut varier entre 0,3 m et 9,0 m.
03 Il est possible de basculer les signaux audio transmis via le câble HDMI entre les états Activ./Désact.. • Arrêt : La vidéo est transmise via le câble de connexion HDMI uniquement, alors que le signal audio est émis par les enceintes du produit uniquement. • Activé : Les signaux audio et vidéo sont transmis via le câble de connexion HDMI, alors que le signal audio est émis par les enceintes du téléviseur uniquement.
Configuration Sélections de l’option Sortie numérique Configuration PCM Bitstream (non traité) Récepteur AV prenant Récepteur AV en charge l'interface prenant en charge HDMI l'interface HDMI Connexion Bitstream (DTS réencodé) Bitstream (Dolby D. réencodé) Récepteur AV prenant en charge l'interface HDMI Récepteur AV prenant en charge l'interface HDMI PCM Jusqu'à 7,1 ca PCM DTS réencodé Dolby D. réencodé * Dolby Digital Jusqu'à 7,1 ca Dolby Digital DTS réencodé Dolby D.
03 Réseau câble L’image vidéo peut défiler plus lentement que le son lorsque le produit est connecté à un téléviseur numérique. Lorsque cela se produit, il faut régler le temps de retard audio de manière à ce qu'il corresponde à l’image vidéo. • Vous pouvez régler le temps de retard audio sur une valeur comprise entre 0 msec et 300 msec. Veillez à le spécifier sur l’état optimal. Configuration d'une connexion câblée - Auto. 1. Appuyez sur les boutons ▲▼ pour sélectionner Câble.
Configuration Pour entrer les Paramètres réseau dans le produit, suivez les étapes suivantes : 1. Appuyez sur les boutons ▲▼ pour sélectionner Câble, puis appuyez sur le bouton ENTRÉE. 2. Appuyez sur les boutons ◄► pour sélectionner Paramètres IP, puis appuyez sur le bouton ENTRÉE. Paramètres Paramètres IP Affichage Audio Mode IP Réseau Adresse IP Système Masque ss-réseau Manuel 0 . 0 . 0 . 0 0 . 0 . 0 . 0 Passerelle 0 . 0 . 0 . 0 Langue Sécurité Mode DNS Manuel 0 . 0 . 0 .
03 Pour entrer les Paramètres réseau dans le produit, suivez les étapes suivantes : 1. Suivez les étapes 1 à 5 de la procédure « Configuration d'une connexion au Réseau sans fil - Auto. » 2. Une fois ceci effectué, appuyez sur les boutons ▲▼◄► pour déplacer le curseur sur Terminé, puis appuyez sur le bouton ENTRÉE. L'écran État du réseau apparaît. Configuration 4. Sur l'écran Sécurité, entrez la phrase de passe correspondant à votre réseau. Entrez directement les numéros en utilisant la télécommande.
Configuration WPS(PBC) 2. Appuyez sur le bouton ENTRÉE. La méthode la plus simple pour configurer la connexion réseau sans fil consiste à utiliser les fonctions WPS(PBC) ou One Foot Connection. Si votre routeur sans fil dispose d'un bouton WPS(PBC), suivez les étapes suivantes : 3. Placez le routeur sans fil Samsung à moins de 25 cm (10 pouces) de l’adaptateur LAN sans fil Samsung à connecter. 1. Appuyez sur les boutons ▲▼ pour sélectionner WPS(PBC).
03 Paramètre initial Vous pouvez exécuter la fonction Paramètres initiaux pour régler les options de langue, les Paramètres réseau, etc. Pour obtenir de plus amples informations sur la fonction Paramètres initiaux, reportez-vous à la section y afférente dans le présent manuel d'utilisation. (Voir page 24) Anynet+ (HDMI-CEC) Anynet+ est une fonction pratique qui autorise des commandes liées entre plusieurs produits Samsung compatibles Aynet+.
Configuration Réinitialisation Modif. mot de passe Tous les réglages sont restaurés sur leur valeur par défaut, à l’exception des réglages réseau et Smart Hub. Vous devez saisir le mot de passe pour cette fonction. Cette option permet de modifier le mot de passe à 4 chiffres utilisé pour accéder aux fonctions de sécurité. ✎ REMARQUE Le mot de passe par défaut est 0000. Langue Vous pouvez sélectionner la langue de votre choix pour le menu Accueil, le menu du disque, etc.
03 7. Suivez les instructions fournies avec l'application destinée à contrôler le produit. Assistance Mise à jour du logiciel Le menu Mise à niveau du logiciel vous permet de mettre à niveau le logiciel du produit pour améliorer ses performances ou obtenir des services supplémentaires. Vous pouvez procéder à la mise à niveau selon quatre méthodes : • Via internet • USB • Via disque • Par téléch. (Fichier) Ces quatre méthodes sont expliquées ci-après.
Configuration Via disque Pour effectuer la mise à niveau par Disque, suivez les étapes suivantes : 1. Visitez www.samsung.com/bluraysupport. 2. Téléchargez sur l'ordinateur le dossier compressé de la mise à niveau la plus récente du disque. 3. Dézippez le dossier compressé sur l'ordinateur. Vous devriez avoir un seul dossier dézippé portant le même nom que le fichier compressé. 4. Gravez le dossier sur un disque, de préférence un CD-R inscriptible ou un DVD-R inscriptible. 5.
04 Fonctions de base Fonctions de base • CD Audio (CD-DA) Lecture d’une vidéo piste 1 piste 2 piste 3 piste 4 piste 5 Lecture 1. Insérez un disque dans le logement du disque, en ayant sa face imprimée orientée vers le haut. 2. Appuyez sur le bouton LECTURE (►). dossier (groupe) 1 fichier 1 fichier 2 Boutons liés à la lecture LECTURE ( ►) Permet de démarrer la lecture. ARRÊT ( ) Permet d'arrêter la lecture. • Si vous appuyez sur ce bouton une fois : La position d'arrêt sera mémorisée.
Fonctions de base Utilisation de Menu Titre Utilisation des fonctions Recherche et Saut Z TITLE MENU 1. Durant la lecture, appuyez sur le bouton TITLE MENU de la POPUP télécommande. 2. Appuyez sur les boutons ▲▼◄► pour effectuer la sélection souhaitée, puis appuyez sur le bouton ENTRÉE. ✎ REMARQUE Les éléments de menu peuvent varier selon le disque et ce menu risque d'être indisponible. L’option Menu Titre ne s'affichera que si le disque contient au moins deux titres.
04 Répétition > Arrêt Lecture au ralenti hzZyx • En mode pause (), appuyez sur le bouton RECH. (). Si vous appuyez sur le bouton RECH. () la vitesse de lecture sera réduite à * 1/8 * 1/4 * 1/2 • Pour reprendre la lecture à une vitesse normale, appuyez sur le bouton LECTURE (►). ✎ REMARQUE Aucun son n’est émis en mode de lecture au 3. Pour reprendre le cours normal de la lecture, appuyez à nouveau sur le bouton REPEAT. 4.
Fonctions de base Utilisation du bouton TOOLS Pendant la lecture, vous pouvez commander le menu du disque en appuyant sur le bouton TOOLS. TOOLS • Écran du menu OUTILS Outils Recherche titre Rech. chapitre Recher. temps Réglage de l’image Audio Eg. util Sous-titres Angle 1/2 : 1/20 : 00:00:13/01:34:37 : Normal : 1/4 ENG Multi CH : : 0/7 Arrêt 1/1 Les informations relatives au mode primaire / secondaire seront aussi affichées si le disque Blu-ray dispose d’une section BONUSVIEW.
04 x • Cette fonction nécessite de posséder de bonnes connaissances dans le domaine de l’extraction et du montage vidéo. • Pour utiliser la fonction Caption (Légende), enregistrez le fichier de légendes (*.smi) sous le même nom que le support DivX (*.avi) et dans le même dossier. Exemple : Root Samsung_007CD1.avi Samsung_007CD1.
Fonctions de base Écouter de la musique 7 Bouton ENTRÉE : Permet de lire la piste sélectionnée. 8 Bouton ► : Durant la lecture, ce bouton permet de passer à la page suivante de la Liste musicale ou à la piste suivante de la Liste d'écoute. Bouton ◄ : Durant la lecture, ce bouton permet de revenir à la page précédente de la Liste musicale ou à la piste précédente de la Liste d'écoute. 9 Bouton ARRÊT : Permet d'arrêter la lecture d'une piste. 0 Bouton $ : Permet de lire la piste suivante.
04 Répétition d'un CD audio (CD-DA)/MP3 1. Insérez un CD audio (CD-DA) ou un disque MP3 dans le logement du disque. • Sur un CD audio (CD-DA), la première piste s'exécute automatiquement. • Sur un disque MP3, appuyez sur les boutons ◄► et sélectionnez Musique, puis appuyez sur le bouton ENTRÉE. 1. Durant la reproduction de la Liste d'écoute, appuyez sur le bouton REPEAT. 2. Sélectionnez le mode de lecture souhaité en appuyant plusieurs fois sur le bouton REPEAT. Désact.
Fonctions de base CD audio | Musique Mode Son 1/2 Page Eléments sélec. : 3 Piste 001 Piste 002 00:43 03:56 Piste 003 Piste 004 04:41 04:02 Piste 005 Piste 006 03:43 03:40 Piste 007 Piste 008 04:06 03:52 Fonction DSP (Processeur de signal numérique) Vous pouvez sélectionner un mode pour optimiser le son à votre goût. DSP Appuyez sur le bouton DSP. Fermer Mode édit. ( ) Page Outils " Choisir ' Retour 5. Sélectionnez la piste souhaitée puis appuyez sur le bouton TOOLS. 6.
04 Lecture d’image Si vous insérez le lecteur iPod dans la station d’accueil dock déjà connectée au système, vous pourrez lire les fichiers vidéo stockés sur le lecteur iPod via le téléviseur connecté. Si le signal vidéo n’est pas correctement synchronisé avec le signal audio, appuyez sur le bouton iPod SYNC de la télécommande pour corriger la synchronisation.
Fonctions de base • Fond musical : Sélectionnez cette option si vous souhaitez écouter de la musique tout en visionnant une photo. • Paramètres de musique de fond : Sélectionnez cette option pour définir le réglage de la musique d’atmosphère. • Zoom : Sélectionnez cette option pour agrandir l’image actuellement sélectionnée. (Agrandissement jusqu’à 4 fois la taille d’origine) • Pivoter : Sélectionnez cette option pour tourner l’image.
04 Utilisation des boutons de la télécommande 1. Appuyez sur le bouton FUNCTION pour sélectionner FM. 2. Sélectionnez la station de votre choix. • Syntonisation préréglée 1 : Vous devez d’abord ajouter une fréquence de votre choix à titre de préréglage. Appuyez sur le bouton ARRÊT () pour sélectionner PRESET, puis appuyez sur le ) afin de choisir une bouton TUNING/CH ( station préréglée.
Fonctions de base Pour afficher les signaux RDS Vous pouvez voir les signaux RDS envoyés par la station à l’écran. Appuyez sur le bouton RDS DISPLAY tout en écoutant une station FM. RDS DISPLAY 1 • Chaque fois que vous appuyez sur ce bouton, l’affichage change d’apparence pour vous apporter les informations suivantes : PS NAME RT CT Fréquence PS (Service de programme) RT (Texte radio) Durant la recherche, la mention apparaît à l’écran suivie par les noms de station.
04 Fonctions de base Mon contenu Connexion d’un iPod/iPhone à l’aide d’un câble USB Vidéos Périph. connecté Si le système est connecté à l’iPod/iPhone, vous pouvez lire la musique sur l’iPod/iPhone en utilisant le système. Photos iPod Fonction Music My Devices Internet 5V 500mA d WPS(PBC) 5V 50 1. Connectez l’iPod/iPhone au port USB situé à l’avant de l’appareil, à l’aide du câble USB. • Votre iPod se met automatiquement sous tension. • Le message « iPod » apparaît à l'écran du téléviseur. 2.
Fonctions de base 6. Sélectionnez le fichier vidéo que vous souhaitez visionner. - Vous pouvez utiliser les boutons de la télécommande ou de l’appareil pour contrôler les fonctions de lecture de base telles que celles qui sont opérées via les boutons LECTURE, PAUSE, ARRÊT, # /$ et /. (Voir page 15.) ✎ REMARQUE ✎ REMARQUE « Made for iPod » La sortie VIDEO (VIDÉO) (Composite) doit être connectée à votre téléviseur pour lire la vidéo sur l’iPod (voir page 20).
05 Services réseau Lisez les instructions suivantes avant d’utiliser un service réseau. 1. Connectez le produit au réseau. (voir pages 22~23) 2. Configurez les paramètres réseau. (Voir pages 33~36) Utilisation de Smart Hub Smart Hub vous permet de télécharger des films, des vidéos et de la musique depuis l'Internet, et d'accéder à diverses applications gratuites ou payantes que vous pouvez ensuite visionner sur votre téléviseur.
Services réseau Smart Hub d'un coup d'œil 1 2 3 4 Samsung Apps Contents 1 Contents 2 6 7 Mes applications : Affiche votre galerie personnelle d'applications au sein de laquelle vous pouvez ajouter, modifier ou supprimer des éléments. 5 Search Your Video Aide à la navigation : Affiche les boutons de la télécommande que vous pouvez utiliser pour naviguer dans Smart Hub. • ROUGE (A) : Pour se connecter à Smart Hub. • VERT (B) : Pour trier les applications. • JAUNE (C) : Pour éditer les applications.
05 Création d'un compte Grâce à votre télécommande, vous pouvez utiliser le clavier numérique à l'écran pour saisir les lettres, les chiffres et les symboles. Pour établir votre configuration Smart Hub exclusive, créez votre propre Compte Smart TV. 1 1 2 3 .,– abc def 4 5 6 ghi jkl mno 7 8 9 pqrs tuv wxyz 1. Maj. 3 T9 Your Video Ab AB 1 Samsung Apps Contents 1 Supprimer ab Appuyez sur le bouton ROUGE (A) de votre télécommande. L’écran Connexion apparaît.
Services réseau 8. Une fois l'opération terminée, appuyez sur le bouton ENTRÉE pour sélectionner OK, puis appuyez à nouveau sur le bouton ENTRÉE. L’écran Connexion apparaît à nouveau. 9. Sélectionnez Confirmer le MDP., puis appuyez sur le bouton ENTRÉE. 10. Répétez les étapes 7 et 8. 11. Lorsque l’écran Connexion apparaît à nouveau, sélectionnez Créer compte, puis appuyez sur le bouton ENTRÉE. La fenêtre de confirmation s'affiche. 2. 3. 4. 5. 12. Sélectionnez OK, puis appuyez sur le bouton ENTRÉE.
05 1. Dans le menu Paramètres, sélectionnez Enregistrer des comptes de service, puis appuyez sur le bouton ENTRÉE. La fenêtre Inscr. compte de service apparaît. 2. Appuyez sur les boutons ▲▼ pour sélectionner le fournisseur d'accès que vous souhaitez associer à votre compte Smart TV, puis appuyez sur le bouton ENTRÉE. ✎ REMARQUE Si vous avez un compte Samsung et souhaitez utiliser la fonction Applications Samsung dans Smart Hub, vous devrez enregistrer ici le compte Applications Samsung.
Services réseau Pour utiliser la fonction Régler, suivez les étapes suivantes : 1. Dans le menu Gestion de compte, sélectionnez Régler, puis appuyez sur le bouton ENTRÉE. L'écran Régler apparaît. 2. Entrez votre mot de passe de sécurité. Il s'agit du mot de passe que vous avez entré lors de la mise en place d'un contrôle parental sur les disques Blu-ray ou les DVD (Voir page 38). Si vous ne l'avez pas fait, entrez 0000. 3. Au bout d'un moment, Smart Hub est automatiquement réinitialisé.
05 La fonction Nouv. dossier vos permet de créer et de nommer des dossiers. Une fois que vous avez créé un dossier, vous pouvez déplacer l’application dans celui-ci. Pour utiliser la fonction Nouv. dossier, suivez les étapes suivantes : 1. 2. 3. Appuyez sur le bouton JAUNE (C) de la télécommande. Appuyez sur les boutons ▲▼◄► pour placer le curseur sur un Nouveau dossier, puis appuyez sur le bouton ENTRÉE. La fenêtre Nouv. dossier apparaît avec un clavier numérique.
Services réseau Verrouil. Supprimer La fonction Verrouillage permet de verrouiller certaines applications situées dans Mes applications, qui ne peuvent donc pas être ouvertes sans saisir le code de sécurité parentale. Pour utiliser la fonction Blocage, suivez les étapes suivantes : La fonction Supprimer permet de supprimer des applications situées dans Mes applications. Pour utiliser la fonction Supprimer, suivez les étapes suivantes : 1. Appuyez sur le bouton JAUNE (C) de la télécommande. 2.
05 Pour télécharger des applications payantes, vous devez créer un compte Samsung et lui adjoindre une carte de crédit. Pour créer un compte Samsung, consultez le site Web www.samsung.com : ✎ REMARQUE Ce service n'est pas disponible dans tous les pays. Accès à l'écran Apps Samsung Pour accéder à l'écran Accès à l'écran Apps Samsung, appuyez sur ▲▼◄► afin de naviguer vers la section Accès à l'écran Apps Samsung de l'écran principal de Smart Hub, puis appuyez sur le bouton ENTRÉE.
Services réseau Aide BD-LIVE™ Si vous avez des questions sur les Applications Samsung, reportez-vous d'abord à la rubrique Aide. Si aucune des astuces proposées ne s'applique à votre situation, veuillez consulter le site Web www.samsung.com. Pour utiliser la fonction Aide, suivez les étapes suivantes : 1. Appuyez sur les boutons ▲▼◄► pour sélectionner Aide, puis appuyez sur le bouton ENTRÉE. 2. Appuyez sur ◄► pour accéder à la fonction Aide à son apparition à l'écran. 3.
06 Autres informations Reportez-vous au tableau ci-dessous lorsque le produit ne fonctionne pas correctement. Si le problème auquel vous êtes confronté n’est pas répertorié dans la liste ou si les instructions fournies ne permettent pas de le résoudre, éteignez le produit, débranchez le cordon d’alimentation et contactez le revendeur agréé le plus proche ou le centre de services Samsung Electronics. Problème Vérification/Solution Il est impossible d’éjecter le disque.
Autres informations Problème Vérification/Solution Il est impossible de changer le format d’écran. • Vous pouvez lire les disques Blu-ray/DVD au format 16:9 respectivement en mode 16:9 large, 4:3 panoramique, ou 4:3 plein écran, toutefois les disques Blu-ray/DVD au format 4:3 ne sont visionnés que selon leur format d’origine. Reportez-vous à la pochette du disque Blu-ray avant de sélectionner la fonction appropriée. • Le produit ne fonctionne pas.
06 Vérification/Solution Fonction PC Share Manager Je peux afficher les dossiers partagés grâce à PC Share Manager mais pas les fichiers. • Normalement, seuls les fichiers correspondant aux catégories Image, Musique et Cinéma s’affichent, les fichiers n’appartenant pas à ces catégories peuvent donc ne pas s’afficher. Autres informations Problème Fonction AllShare La lecture vidéo est discontinue. • Vérifiez si le réseau est stable.
Autres informations Specifications Informations générales Poids Dimensions Plage de températures de fonctionnement Plage de taux d’humidité de fonctionnement Signal/noise ratio Usable sensitivity Total harmonic distortion BD (Disque Blu-ray) 3.5 kg 429.3 (L) x 58.4 (H) x 325.1 (P) mm +5°C à +35°C 10 % à 75 % 55 dB 12 dB 0.
Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Contact Centre Area ` North America Canada Mexico U.S.A Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
Elimination des batteries de ce produit (Applicable aux pays de l’Union européenne et aux autres pays européens dans lesquels des systèmes de collecte sélective sont mis en place.) Le symbole sur la batterie, le manuel ou l'emballage indique que les batteries de ce produit ne doivent pas être éliminées en fin de vie avec les autres déchets ménagers.
HT-D5200 2.1CH Blu-ray™ Heimkino-System Bedienungsanleitung Erleben Sie die Möglichkeiten Vielen Dank, dass Sie sich für dieses Produkt von Samsung entschieden haben. Um unseren umfassenden Service nutzen zu können, registrieren Sie Ihr Produkt unter www.samsung.com/register HT-D5200_GER_1226.
Sicherheitsinformationen Sicherheitshinweise ZUR VERMEIDUNG VON STROMSCHLÄGEN DARF DIESES GERÄT NICHT GEÖFFNET WERDEN. ES ENTHÄLT KEINE BAUTEILE, DIE VOM BENUTZER GEWARTET WERDEN KÖNNEN. LASSEN SIE REPARATUREN NUR VON QUALIFIZIERTEM FACHPERSONAL DURCHFÜHREN. ACHTUNG STROMSCHLAGGEFAHR! NICHT ÖFFNEN! Dieses Symbol weist auf „gefährliche Netzspannung“ im Inneren des Geräts hin. Es besteht somit die Gefahr von Stromschlägen und Verletzungen.
Vorsichtsmaßnahmen • Stellen Sie sicher, dass die Stromversorgung in Ihrem Haus den auf der Rückseite Ihres Produkts angegebenen Anforderungen entspricht. • Stellen Sie den Player horizontal auf einer geeigneten Unterlage (Möbel) auf, so dass um ihn herum ausreichend Platz (7,5-10 cm) zur Belüftung bleibt. • Stellen Sie das Gerät nicht auf Verstärker oder andere Geräte, die heiß werden können. Achten Sie darauf, dass die Belüftungsöffnungen nicht abgedeckt sind.
Sicherheitsinformationen Vorsichtsmaßnahmen beim Verwenden und Lagern von Datenträgern Kratzer auf der Disk könnten die Ton- und Bildqualität verringern sowie eine sprunghafte Wiedergabe verursachen. Achten Sie besonders darauf, den Disks bei der Handhabung keine Kratzer zuzufügen. Halten der Disks • Berühren Sie nicht die Wiedergabeseite einer Disk. • Halten Sie die Disk mit den Fingerspitzen am Rand fest damit keine Fingerabdrücke auf der beschreibbaren Oberfläche zurückbleiben.
Inhalt ERSTE SCHRITTE 7 8 12 13 13 14 15 Symbole in dieser Bedienungsanleitung Disk-Typen und Merkmale Zubehör Beschreibung Vorderseite Rückseite Fernbedienung ANSCHLÜSSE 17 18 19 21 22 23 Lautsprecher anschließen Externe Geräte/Ihr TV über HDMI anschließen Anbringen des Ferritringkerns am Netzkabel Des Hausgeräts Externe Audiokomponenten anschließen Anschluss an das Netzwerk Zum Anschließen der UKW-Antenne 24 25 26 26 27 27 27 27 29 29 29 29 29 30 30 30 31 31 31 32 33 33 33 36 36 37 37 37 37 37 37 3
Inhalt EINSTELLUNG 38 38 38 38 38 38 38 39 39 40 Sicherheit BD-Sicherungsstufe DVD-Sicherungsstufe Passwort ändern.
01 Erste Schritte Erste Schritte Symbole in dieser Bedienungsanleitung Informieren Sie sich vor dem Lesen der Bedienungsanleitung über die nachstehenden Begriffe. Begriff Logo BD-ROM BD-RE/-R DVD-VIDEO Symbol Erklärung h z Z Hier handelt es sich um eine Funktion, die bei BD-ROMs zur Verfügung steht. Hier handelt es sich um eine Funktion die bei BD-RE/-R Disk zur Verfügung steht, die im BD-RE-Format beschrieben wurden. Hier handelt es sich um eine Funktion, die bei DVD-VIDEO zur Verfügung steht.
Erste Schritte Disk-Typen und Merkmale Logos von abspielbaren Disks Blu-ray-Disk-Kompatibilität Blu-ray ist ein neues, sich noch weiterentwickelndes Format. Infolgedessen können Kompatibilitätsprobleme auftreten. Nicht alle Disks sind kompatibel, und nicht jedes Format kann wiedergegeben werden. Weitere Informationen dazu finden Sie im Abschnitt „Disktyp und Merkmale“ dieses Handbuchs. Blu-ray-Disc 3D Blu-ray Disc Dolby Digital Plus PAL-Fernsehsystem in Großbritannien, Frankreich, Deutschland usw.
01 BD-RE/-R Das Produkt und die DVDs sind nach Regionen codiert. Diese Regionalcodes müssen übereinstimmen, damit die Disk wiedergegeben werden kann. Blu-ray RE/-R Disks können aufgenommen und wiedergegeben werden. Dieses Produkt kann BD-RE/-R-Disks abspielen, die mit anderen kompatiblen Blu-ray-Disc-Rekordern beschrieben wurden. Erste Schritte Regionalcode DVD-VIDEO Disktyp Regionalcode Region A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong und Südostasien.
Erste Schritte Disk-Format JPEG-Disks verwenden • Es wird die Wiedergabe von CD-R/-RW, DVD-RW/-R aufgenommen in den Formaten UDF oder JOLIET unterstützt. • Es können nur Dateien mit den Erweiterungen „.jpg", „.JPG", „.jpeg" oder „JPEG" angezeigt werden. • Progressive JPEG wird unterstützt. DVD-RW/-R (V) • Es handelt sich um ein Format, das für Aufnahmen auf DVD-RW oder DVD-R verwendet wird. Die Disk kann mit diesem Heimkino-System wiedergeben werden, sobald sie finalisiert wurde.
01 Ballastbehälter *.vro VRO VOB Video Codec Audio Codec Auflösung MPEG2 AC3 MPEG LPCM 1920x1080 AC3 MPEG LPCM AAC 352x288 MPEG1 MPEG1 *.mpg *.mpeg MPEG2 PS H.264 1920x1080 1920x1080 AC3 AAC MP3 DD+ HE-AAC MPEG2 *.ts *.tp *.trp 352x288 H.264 TS VC1 Erste Schritte Dateierweiterung 1920x1080 1920x1080 1920x1080 Beschränkungen • • • • • Einige der oben aufgelisteten Codecs werden nicht unterstützt, wenn es ein Problem mit dem Inhalt gibt.
Erste Schritte Notizen zu USB-Anschluss Unterstützte Geräte: USB-Speichermedien, MP3-Spieler, digitale Kamera, USB Kartenleser 1) Werden nicht unterstützt wenn ein Ordner oder eine Datei mehr als 125 Zeichen enthält. 2) Eine Untertiteldatei größer als 300 KB kann möglicherweise nicht ordnungsgemäß angezeigt werden. 3) Ein bestimmtes USB/Digital-Kameragerät mag mit dem Produkt möglicherweise inkompatibel sein. 4) FAT16 und FAT32 -Dateisysteme werden unterstützt.
01 Erste Schritte Beschreibung Vorderseite 1 2 3 4 5 6 7 8 9 10 11 5V 500mA 1 TASTE EIN-/AUSSCHALTEN ( 2 TASTE FUNKTION Der Modus wechselt in folgender Reihenfolge: BD/DVD D. IN AUX R. IPOD H. IN1 H. IN2 FM 3 4 5 ANZEIGE Zeigt den Wiedergabestatus, die Uhrzeit usw. an. TASTE STOPP Beendet die Wiedergabe einer Disk. TASTE WIEDERGABE/PAUSE Spielt eine Disk ab oder hält die Wiedergabe an. 6 TASTE EINGABE Wählt Menüpunkte aus oder startet eine Blu-ray-Disk.
Erste Schritte Rückseite 1 2 3 4 5 6 HDMI OUT HDMI IN 7 8 9 10 11 COMPONENT OUT FM ANT 12 SPEAKERS OUT FRONT LAN iPod DIGITAL AUDIO IN OPTICAL SUBWOOFER FRONT WIRELESS LAN AUX IN VIDEO OUT SPEAKER IMPEDANCE : 3 1 WLAN-ANSCHLUSS Kann für netzwerkbasierte Dienste (siehe Seiten 55-64), BD-LIVE und Aktualisierungen mit Hilfe eines WLAN-Adapters verwendet werden.
01 Übersicht der Fernbedienung FUNCTION TV SOURCE POWER Schaltet das Heimkino-System ein/aus. Um zum TV-Modus zu wechseln, drücken Sie die Taste TV. Um zu Heimkino zu wechseln, drücken Sie die Taste BD. Drücken Sie die Nummerntasten, um die Optionen auszuführen. RECEIVER SLEEP BD TV TA RDS DISPLAY 1 2 3 PTY- PTY SEARCH PTY+ 4 5 6 7 8 REPEAT 0 Zum Vorwärts- oder Rückwärtsspringen. Zum Wiedergeben/Beenden einer Disk.
Erste Schritte Sie können die Lautstärke anpassen und stabilisieren. (Digital-Signalprozessor) * Batteriegröße: AAA Markencodeliste des Fernsehgeräts Marke Code Marke Code Admiral (M.
02 Anschlüsse Anschlüsse In diesem Kapitel werden verschiedene Möglichkeiten erläutert, das Heimkino-System mit anderen externen Komponenten zu verbinden. Bevor Sie das Gerät installieren oder an einer anderen Stelle aufstellen, müssen Sie es ausschalten und den Netzstecker ziehen. Lautsprecher anschließen Platzierung des Heimkino-Systems. Platzieren Sie das Gerät auf einem Regal, einer Kommode oder unter dem Fernsehtisch.
Anschlüsse Lautsprecher anschließen 1. Drücken Sie die Anschlusslasche an der Rückseite des Lautsprechers herunter. 2. Führen Sie das schwarze Kabel in den schwarzen Anschluss (-) und das rote Kabel in den roten Anschluss (+) ein. Lassen Sie die Lasche dann wieder los. 3. Beachten Sie beim Anschließen der Lautsprecher an der Rückseite des Produkts, dass die Farben der Stecker denen der Buchsen entsprechen.
02 entsprechend dem Videoausgang (HDMI, Component oder Composite) des Produkts einstellen. Informationen, wie Sie die Video-Eingangsquelle an Ihrem Fernsehgerät auswählen, finden Sie im Benutzerhandbuch des Fernsehgeräts. Wenn Sie die Einstellungen der Fernbedienung mit dem Fernsehgerät abgestimmt haben, drücken Sie auf der Fernbedienung die Taste TV SOURCE, und wählen Sie als externe Quelle für das Fernsehgerät VIDEO aus. Sie müssen eine HDMI-Verbindung verwenden, um Videos mit 3D-Technik zu genießen.
Anschlüsse Rot Blau Grün COMPONENT OUT SPEAKERS OUT METHODE 1 FRONT Gelb SUBWOOFER AUX IN VIDEO OUT FRONT METHODE 2 SPEAKER IMPEDANCE : 3 METHODE 1: Component-Video (BESSERE QUALITÄT) Falls Ihr Fernsehgerät über einen Komponentenvideo-Eingang verfügt, verbinden Sie das Komponentenvideo-Kabeln (PR, PB und Y) an der Rückseite des Produkts über ein KomponentenvideoKabel (nicht mitgeliefert) mit den entsprechenden Video-Eingangsbuchsen des Fernsehgeräts.
02 Anschlüsse Externe Audiokomponenten anschließen COMPONENT OUT FM ANT DIGITAL AUDIO IN HDMI OUT HDMI IN OPTICAL AUX IN VIDEO O Weiß Rot Optisches Kabel (Nicht enthalten) Set-Top Box OPTISCH Audiokabel (Nicht enthalten) Falls das externe, analoge Gerät nur über einen AudioAusgang verfügt, schließen Sie entweder den linken oder den rechten Kanal an. VCR AUX OPTICAL (OPTISCH): Anschließen eines digitalen externen Geräts Digitale Geräte sind z. B.
Anschlüsse Anschluss an das Netzwerk Dieses Produkt bietet die Verwendung von Netzwerkdienste (siehe Seiten 55~64) z.B. Smart Hub und BD-LIVE, so wie Softwareaktualisierung wenn eine Internetverbindung besteht. Wir empfehlen für die Verbindung einen Drahtlos- oder IP-Router. Für weitere Informationen über die Verbindung zu einem Router lesen Sie in der Bedienungsanleitung nach, für technische Hilfe kontaktieren Sie bitte den Hersteller des Routers. Kabel-Netzwerk 1.
02 Sie können die Verbindung zum Netzwerk mit einem drahtlosen IP-Sharer herstellen. 1. Zur Herstellung einer Funknetzwerkverbindung ist ein kabelloser AP/IP-Router erforderlich. Verbinden Sie den WLAN-Adapter auf der Rückseite des Heimkino-Systems an den WLAN-Adapter. 2. Netzwerkoption einstellen.
Einstellung Ersteinstellung 1. Schalten Sie Ihr Fernsehgerät ein, nachdem Sie das Produkt angeschlossen haben. Wenn Sie den Player zum ersten Mal an ein Fernsehgerät anschließen und es einschalten, erscheint die Bildschirmanzeige mit den Anfangseinstellungen. • Home-Menü Eig. Inhalte Videos Fotos Musik Funktion Eig. Gerät Internet Einstell. Initial Settings | On-Screen Language Select a language for the on-screen displays.
03 DISC MENU MENU TITLE MENU 3. Mit den ▲▼ Tasten das gewünschte Untermenü aus, und anschließend die EINGABE Taste drücken. POPUP 1 TOOLS INFO 4. Mit den ▲▼ Tasten die gewünschte Option auswählen und anschließend die EINGABE Taste drücken. 3 2 RETURN Einstellung 2. Die ◄► Tasten drücken um Einstell., auszuwählen und anschließend die EINGABE Taste drücken. Zugriff auf das Einstellungen Menü 4 EXIT 5. Mit der EXIT Taste könne Sie das Menü verlassen.
Einstellung Je nach Inhalt und Position des Bildes auf Ihrem Anzeige Sie können verschiedene Anzeigeoptionen, wie Bildseitenverhältnis, Auflösung, usw. konfigurieren. Bildgröße 3D-Einstell. Sie können auswählen, ob eine Blu-ray Disk mit 3D-Inhalten im 3D-Modus wiedergeben soll. Einstell. Anzeige 3D-Einstell. Audio 3D-Einstell. Netzwerk System 3D Blu-ray-Wiedergabemod. : Auto Sprache Bildgröße Wenn Sie 3D-Inhalte genießen möchten, > Beweg.
03 BD Wise (nur bei Samsung Produkten) Sie haben die Möglichkeit, das Bildformat je nach Art des verwendeten Fernsehgeräts entsprechend anzupassen. BD Wise ist Samsungs neueste Funktion für Interkonnektivität. Wenn Sie ein Samsung-Produkt und ein SamsungFernsehgerät mit BD Wise über HDMI miteinander verbinden und BD Wise sowohl beim Produkt als auch beim Fernsehgerät auf Ein gesetzt ist, spielt das Produkt das Video in Videoauflösung und Bildfrequenz der BD/DVD-Disk ab.
Einstellung Auflösung entsprechend Ausgabegabemodus • Wiedergabe Blu-ray-Disc/E-Inhalte/digitale Inhalte HDMI / Verbindung Ausgang HDMI / keine Verbindung HDMI-Modus Component-Modus Component/ VIDEO Modus Blu-ray-Disc E-Inhalte/ digitale Inhalte VIDEO-Modus 1080p@60F 576i/480i - - - Automatisch Maximale Auflösung des FernsehgerätEingangs Maximale Auflösung des FernsehgerätEingangs 576i/480i - - - 1080p@60F 1080p@60F 1080p@60F 576i/480i - - - Filmrahmen: Auto (24 B/Sek.
03 Falls das von Ihnen an das Produkt angeschlossene Fernsehgerät den Videorahmen oder die von Ihnen gewählte Auflösung nicht unterstützt, wird folgende Meldung angezeigt: ,,Wenn keine Bilder nach der Auswahl angezeigt werden, warten Sie 15 Sekunden. Und dann wird die Auflösung automatisch auf den vorherigen Wert zurückgesetzt.
Einstellung Audio Lautsprechereinst. Einstell. Lautsprechereinst. Anzeige Audio | Pegel Netzwerk Entfernung System Entfernung Für Fälle, in denen die Lautsprecher nicht im gleichen Abstand von der Hörposition aufgestellt werden können, können Sie für Front-, Center-, Surround-Lautsprecher und Subwoofer die Verzögerungszeit des Audiosignals einstellen. • Sie können die Entfernung zwischen den Lautsprechern von 0.3m und 9.0m einstellen. Sprache Sicherheit Einstell.
03 Die über das HDMI-Kabel gesendeten Audiosignale können Ein-/Aus geschaltet werden. • Aus : Das Videosignal wird nur über das HDMIVerbindungskabel gesendet. Die Audioausgabe erfolgt ausschließlich über die Lautsprecher Ihres Hauptgeräts. • Ein : Sowohl Video- als auch Audiosignale werden über das HDMI Verbindungskabel gesendet. Die Audioausgabe erfolgt nur über die Lautsprecher Ihres TV-Geräts. ✎ HINWEIS HDMI AUDIO wird automatisch als 2-Kanalton für die TV-Lautsprecher abgemischt.
Einstellung Auswahl des Digitalausgangs Einstellung PCM Bitstrom (unverarbeitet) HDMI-unterstützender HDMI-unterstützender HDMI-unterstützender AV-Empfänger AV-Empfänger AV-Empfänger Verbindung Bitstrom (neue Dolby D-Encodierung) HDMI-unterstützender AV-Empfänger PCM Bis zu 7.1-Kanalton PCM DTS Neue Encodierung Neu encodiert Dolby Digital * Dolby Digital Bis zu 7.
03 Kabelnetzwerk Wenn das Produkt mit einem digitalen Fernseher verbunden ist, erscheint das Bild möglicherweise dem Ton gegenüber verzögert. Passen Sie in diesem Fall die Audio-Verzögerungszeit dem Video an. • Sie können eine Audio-Verzögerungszeit zwischen 0 mSec und 300 mSec einstellen. Stellen Sie sie auf den optimalen Status. Einrichten einer Kabelverbindung - Auto Netzwerk 1. Mit Hilfe der ▲▼ Tasten Kabel auswählen. Einstell.
Einstellung Um die Netzwerkeinstellungen bei Ihrem Player einzugeben, unternehmen Sie folgende Schritte: 1. Mit Hilfe der ▲▼ Tasten Kabel auswählen, und die EINGABE Taste drücken. 2. Die ◄► Tasten drücken, um IP-Einstell. auszuwählen und anschließend die EINGABE Taste drücken. WLAN-Netzwerk Es gibt drei verschiedene Möglichkeiten das WLAN-Netzwerk zu konfigurieren: • WLAN (Allgemein) • Verwendung von WPS(PBC).
03 Einstell. Anzeige Audio Um die Netzwerkeinstellungen bei Ihrem Player einzugeben, unternehmen Sie folgende Schritte: 1. Folgen Sie den Schritten 1 bis 5 der Prozedur 'Einrichten der WLANNetzwerkverbindung - Auto'. 2. Mit Hilfe der ▲▼◄► Tasten den Cursor auf Fertig setzen und anschließend die EINGABE Taste drücken. Der Netzwerkstatus-Bildschirm erscheint. Netzwerkeinstellungen Sicherh.-Schl. eing. 0 einge. Einstell. Netzwerk System Sprache Sicherheit Allgemein Einstellung 4.
Einstellung WPS(PBC) Der einfachste Weg die WLANNetzwerkverbindung einzurichten, besteht in der Verwendung der WPS(PBC) Funktion oder der One Foot Connection Funktion. Wenn Ihr Wireless Router über eine WPS(PBC) Taste verfügt, folgen Sie diesen Schritten: 1. Mit Hilfe der ▲▼ Tasten WPS(PBC) auswählen. Einstell. 2. Drücken Sie die EINGABE Taste. 3. Um eine Verbindung aufzubauen, den Samsung Wireless Router in einem Abstand von 25 cm zum Samsung Wireless LAN Adapter aufstellen. 4.
03 Ersteinstellung Mit der Hilfe der Funktion Ersteinstellungen können Sie die Sprache, Netzwerkeinstellung usw. einstellen. Für weitere Informationen über die Funktion Ersteinstellungen schlagen Sie im Abschnitt Ersteinstellungen in dieser Bedienungsanleitung nach. (Siehe Seite 24) Anynet+ (HDMI-CEC) Anynet+ ist eine komfortable Funktion, über die verschiedene Samsung-Geräte mit der Anynet+Funktion gemeinsam operieren können.
Einstellung Zurück Passwort ändern. Mit Ausnahme der Netzwerk- und Smart Hub Einstellungen werden alle Einstellungen auf die Voreinstellungen zurückgesetzt. Bei dieser Funktion muss das Passwort eingegeben werden. Ändern des 4-stelligen Passwortes für Zugriff auf Sicherheitsfunktionen. ✎ HINWEIS Das Standardkennwort lautet „0000“. Sprache Sie können die Sprache auswählen, in der das HomeMenü, Diskmenü, usw. angezeigt werden soll. • Bildschirmmenü : Einstellen der Sprache für das Bildschirmmenü.
03 7. Folgen Sie den Anweisungen der Anwendung für die Steuerung des Players. ✎ HINWEIS Ihr Produkt muss mit dem Internet Unterstützung Software-Update Mit diesem Menü für Software-Aktualisierungen können Sie Software-Aktualisierungen des Produkts herunterladen, die der Leistungsverbesserung oder zusätzlichen Diensten dienen. Ihnen stehen vier Optionen zur Aktualisierung zur Verfügung. • Über Internet • Per USB • Über Disk • Über Download (Datei) Diese vier Methoden werden im Folgenden erläutert.
Einstellung Über Disk Um das Update über eine Disk durchzuführen, folgen Sie diesen Schritten: 1. Besuchen Sie www.samsung.com/ bluraysupport. 2. Laden Sie das letzte Disk Software Upgrade Zip-Archiv auf Ihren Computer herunter. 3. Entpacken Sie das Zip-Archiv auf Ihrem Computer. Sie sollten einen eigenen Ordner mit dem gleichen Namen wie die Zip-Datei anlegen. 4. Schreiben Sie den Ordner auf eine Disk. Wir empfehlen eine CD-R oder DVD-R zu verwenden. 5.
04 Grundfunktionen Track 1 Track 2 Track 3 Track 4 Track 5 Wiedergabe 1. Legen Sie die Disk in das Diskfach mit der bedruckten Seite nach vorne ein. 2. Drücken Sie die WIEDERGABE (►) Taste. • MP3, WMA, DivX, MKV und MP4 Ordner (Gruppe) 1 Datei 1 Datei 2 Tasten für die Wiedergabe: Grundfunktionen • Audio-CD (CD-DA) Ein Video wiedergeben Ordner (Gruppe) 2 Datei 1 Datei 2 Datei 3 WIEDERGABE ( ►) Startet die Wiedergabe. STOPP ( ) Beendet die Wiedergabe.
Grundfunktionen Titelmenü verwenden Such- und Überspringen-Funktionen verwenden Z TITLE MENU 1. Drücken Sie während der POPUP Wiedergabe die Taste TITLE MENU auf der Fernbedienung. 2. Wählen Sie mit den Tasten ▲▼◄► die gewünschte Option aus, und drücken Sie die Taste EINGABE. ✎ HINWEIS Abhängig von der Disk können die Menüpunkte abweichen und dieses Menü ist möglicherweise nicht vorhanden. Das Titelmenü wird nur angezeigt wenn die Disk mindesten 2 Titel enthält. Popup-Menü verwenden h 1.
04 Wiederh. > Aus Wiedergabe in Zeitlupe hzZyx • Drücken Sie im pause ( ) -Modus die Taste SUCHE (). Wenn Sie die Taste SUCHE () drücken, reduziert sich die Wiedergabegeschwindigkeit auf * 1/8 * 1/4 * 1/2 • Um zur normalen Wiedergabegeschwindigkeit zurückzukehren, drücken Sie die Taste WIEDERGABE (►). ✎ HINWEIS Im Zeitlupenmodus erfolgt keine Tonwiedergabe. Die Zeitlupe funktioniert nur bei 3. Drücken Sie die Taste REPEAT, um in den normalen Wiedergabemodus zurückzukehren. 4.
Grundfunktionen Die Taste TOOLS verwenden Während der Wiedergabe können Sie das Diskmenü durch Betätigung der Taste TOOLS bedienen. TOOLS • EXTRAS Menüanzeige Extras Titelsuche Kapitelsuche Zeitsuche Bildeinstellungen Audio Ben.-EQ Untertitel Winkel 1/2 : 1/20 : 00:00:13/01:34:37 : Normal : 1/4 ENG Multi CH : : 0/7 Aus 1/1 Informationen über den ersten bzw. zweiten Modus werden auch dann angezeigt, wenn die Blu-ray-Disk über einen BONUSVIEWAbschnitt verfügt.
04 x • Für die ordnungsgemäße Verwendung dieser Funktion müssen Sie über Erfahrung in der Videoextraktion und -bearbeitung verfügen. • Speichern Sie für die Verwendung der Untertitelfunktion die Untertiteldatei (*.smi) mit dem gleichen Dateinamen wie die DivX-Datei (*.avi) im gleichen Ordner ab. Beispiel: Root Samsung_007CD1.avi Samsung_007CD1.
Grundfunktionen Musik hören 7 Taste EINGABE: Wiedergabe des ausgewählten Musiktitels. 8 Taste ►: Während der Wiedergabe gelangt man in der Musikliste zur nächsten Seite oder in der Wiedergabeliste zum nächsten Titel. Taste ►: Während der Wiedergabe gelangt man in der Musikliste zur nächsten Seite oder in der Wiedergabeliste zum nächsten Titel. 9 Taste STOPP: Stoppt die Wiedergabe eines Musiktitels. 0 Taste $: Zum Abspielen des nächsten Titels ! Taste #: Zum Abspielen des vorherigen Titels.
04 Eine Audio-CD (CD-DA)/MP3 wiederholen 1. Legen Sie eine Audio-CD (CD-DA) oder eine MP3-Disk ins Diskfach ein. • Von einer Audio-CD (CD-DA) wird der erste Titel automatisch abgespielt. • Bei einer MP3-Disk wählen Sie mit den Tasten ◄► die Option Musik, dann drücken Sie die Taste EINGABE. 1. Drücken Sie während des Abspielens der Wiedergabeliste die Taste REPEAT. 2. Wählen Sie den gewünschten Wiedergabemodus durch wiederholtes Drücken der Taste REPEAT.
Grundfunktionen Audio-CD | Musik Tonmodus 1/2 Seite Ausgew. Elemente : 3 Track 001 Track 002 00:43 03:56 Track 003 Track 004 04:41 04:02 Track 005 Track 006 03:43 03:40 Track 007 Track 008 04:06 03:52 Bearb.-Mod. beend. ( ) Seite Extras DSP (Digital Signal Processor)-Funktion Sie können Modus auswählen, um den Klang nach Ihren Wünschen zu optimieren. Drücken Sie die Taste DSP. " Wählen ' Zurück 5. Wählen Sie einen gewünschten Titel und drücken Sie die Taste TOOLS. 6.
04 Ein Bild wiedergeben Wenn Sie Ihren iPod ins iPod-Dock einlegen, das schon mit dem System verbunden worden ist, können die Videoakten in Ihrem iPod durch das angeschlossene Fernsehgerät wiedergegeben werden. Wenn das Videosignal nicht einwandfrei mit dem Audiosignal synchronisiert, drücken Sie iPod SYNC auf der Fernbedienung, um die Synchronisation zu korrigieren.
Grundfunktionen • Hintergrundmusik : Wählen Sie diese Option, wenn sie während der Diashow Musik hören möchten. • Einstellung der Hintergrundmusik : Wählen Sie diese Option, wenn Sie die HintergrundmusikEinstellung festlegen möchten. • Zoom : Wählen Sie diese Option, wenn Sie das aktuelle Bild vergrößern möchten. (Bis zu 4fache Vergrößerung) • Drehen : Wählen Sie diese Option, wenn Sie das Bild drehen möchten. (Das Bild wird entweder im Uhrzeigersinn oder gegen den Uhrzeigersinn gedreht.
04 Mithilfe der Tasten auf der Fernbedienung 1. Wählen Sie mit der Taste FUNCTION die Option FM aus. 2. Stellen Sie den gewünschten Sender ein. • Voreinstellen der Senderwahl 1: Zuerst müssen Sie eine gewünschte Frequenz als Voreinstellung hinzufügen. Drücken Sie die Taste STOPP (), um PRESET auszuwählen. Drücken Sie anschließend ), um den die Taste TUNING/CH ( voreingestellten Sender auszuwählen. • Manuelle Senderwahl: Drücken Sie die Taste STOPP (), um MANUAL auszuwählen.
Grundfunktionen Zur Anzeige der RDS-Signale Programmsuche mithilfe der PTY-Codes Sie können die von der Station gesendeten RDSSignale auf der Anzeige sehen. Bevor Sie beginnen! Betätigen Sie die Taste RDS DISPLAY, während sie einen UKW-Sender hören. • Bei jeder Betätigung der Taste ändert sich die Anzeige, um Ihnen folgende Informationen anzuzeigen: PS NAME RT CT Frequenz PS (Programmdienst) Während des Suchvorgangs erscheint , und danach werden die Sendernamen angezeigt.
04 Grundfunktionen iPod/iPhone mithilfe eines USB-Kabels anschließen Eig. Inhalte Videos Angeschl. Gerät Wenn ein iPod/iPhone an das System angeschlossen ist, können Sie Musik von dem iPod/iPhone über das System wiedergeben. Photos iPod Funktion Music My Devices Internet Einstell. " Eingabe ' Zurück 5V 500mA d WPS(PBC) 5V 50 1. Schließen Sie iPod/iPhone unter Verwendung eines USB-Kabels an den vorderen USB-Port an. • Ihr iPod wird nun automatisch eingeschaltet.
Grundfunktionen 6. Wählen Sie die Videodatei für die Wiedergabe. - Sie können durch die Fernbedienung oder das Produkt einfache Wiedergabefunktionen, z. B. WIEDERGABE, ANHALTEN, STOPP, # /$ und / ausführen. (Siehe Seite 15.) ✎ HINWEIS „Made for iPod“ ✎ HINWEIS Sie müssen den Video-Ausgang (Composite) mit ihrem Fernsehgerät verbunden haben um Videos vom iPod zu sehen (Siehe Seite 20).
Lesen Sie sich die folgende Anleitung durch, bevor Sie irgendeinen Netzwerkdienst verwenden. 1. Schließen Sie das Produkt ans Netzwerk an. (Siehe Seiten 22~23) 2. Die Netzwerkeinstellungen konfigurieren. (Siehe Seiten 33~36) 3. Der Smart Hub Bildschirm wird angezeigt. ✎ HINWEIS Manche Anwendungen sind nur in bestimmten Ländern verfügbar. Netzwerkdienste Sie können zahlreiche Netzwerkdienste wie Smart Hub oder BD-LIVE in Anspruch nehmen, wenn Sie das Produkt an Ihr Netzwerk anschließen.
Netzwerkdienste Smart Hub auf einen Blick 1 2 3 4 5 5 Empfehlungen : Zeigt empfohlene, von Samsung verwaltete Inhalte an. 6 Navigationshilfe : Zeigt die Tasten auf der Fernbedienung an, die für die Navigieren in Smart Hub verwendet werden können. • ROT (A) : Anmelden bei Smart Hub. • GRÜN (B) : Anwendungen sortieren. • GELB (C) : Anwendungen bearbeiten. • BLAU (D) : Ändern der Smart Hub Einstellungen.
05 Erstellen eines Kontos Mithilfe der Fernbedienung können Sie die Bildschirm-Tastatur benutzen, um Buchstaben, Zahlen und Symbole einzugeben. Um Ihre eigene, exklusive Konfiguration von Smart Hub einzurichten, müssen Sie ihr eigenes Smart TV Konto erstellen. Um ein Konto zu erstellen, folgen Sie diesen Schritten: 1 2 3 1 2 3 .,– abc def 4 5 6 ghi jkl mno 7 8 9 pqrs tuv wxyz 1. 0 Umschalt. Entfernen Drücken Sie die ROTE (A) Taste auf Ihrer Fernbedienung.
Netzwerkdienste 8. 9. 10. 11. 12. 13. 14. Wenn die Eingabe abgeschlossen ist, die EINGABE Taste drücken, um OK auszuwählen und anschließend die EINGABE Taste drücken. Der Anmeldebildschirm wird erneut angezeigt. Passwort bestätigen auswählen und anschließend die EINGABE Taste drücken. Wiederholen Sie die Schritte 7 und 8. Wenn der Anmeldebildschirm erneut angezeigt wird, Konto erstellen auswählen und die EINGABE Taste drücken. Das Bestätigungsfenster wird angezeigt.
05 1. 2. Im Einstellungen Menü Register Service Account auswählen und die EINGABE Taste drücken. Das Fenster Dienst Konto registrieren erscheint. Mit den ▲▼ Tasten einen Dienstanbieter auswählen, mit dem Sie ihr Smart TV Konto verknüpfen möchten und anschließend die EINGABE Taste drücken. ✎ HINWEIS Wenn Sie über ein Samsung Konto verfügen und Sie die Funktion Samsung Apps unter Smart Hub verwenden möchten, müssen Sie Ihr Samsung Apps Konto hier registrieren. Siehe weitere Informationen auf Seite 62.
Netzwerkdienste Um die Funktion Zurücksetzen nutzen zu können, folgen Sie diesen Schritten: 1. Im Kontenmanagement Zurücksetzen auswählen und anschließend die EINGABE Taste drücken. Das Fenster Zurücksetzen wird angezeigt. 2. Geben Sie das Sicherheitspasswort ein. Hierbei handelt es sich um das Passwort, das Sie bei der Zugriffsbeschränkung für BDs oder DVDs eingerichtet haben (siehe Seite 38). Wenn Sie kein Passwort eingerichtet haben, 0000 eingeben. 3.
05 Mit der Funktion Neuer Ordner können Sie neue Ordner erstellen und benennen. Nachdem ein Ordner erstellt wurde, können Anwendungen in diesen Ordner verschoben werden. Um die Funktion Neuer Ordner nutzen zu können, folgen Sie diesen Schritten: 1. 2. 3. Drücken Sie die GELBE (C) Taste auf Ihrer Fernbedienung. Mit den ▲▼◄► Tasten den Cursor auf Neuen Ordner bewegen und anschließend die EINGABE Taste drücken. Das Fenster Neuer Ordner und eine Tastatur werden angezeigt.
Netzwerkdienste Sperren Löschen Mit der Funktion Sperren können einige Anwendungen in Meine Anwendungen gesperrt werden, sodass sie nicht ohne die Eingabe des Codes für die Altersbeschränkung geöffnet werden können. Um die Funktion Sperren nutzen zu können, folgen Sie diesen Schritten: Mit Hilfe der Funktion Löschen können Anwendungen aus Meine Anwendungen gelöscht werden. Um die Funktion Löschen nutzen zu können, folgen Sie diesen Schritten: 1. Drücken Sie die GELBE (C) Taste auf Ihrer Fernbedienung. 2.
05 Wenn Sie gebührenpflichtige Anwendungen herunterladen möchten, müssen Sie ein Samsung Konto anlegen und eine Kreditkarte für dieses Konto angeben. Um ein Samsung Konto zu erstellen, besuchen Sie bitte www.samsung.com. ✎ HINWEIS Der Dienst kann in einigen Ländern nicht zur Verfügung stehen.
Netzwerkdienste Hilfe BD-LIVE™ Wenn Sie Fragen zu Samsung Apps haben, sehen Sie bitte zuerst in der Hilfe nach. Falls keiner der Ratschläge zutrifft, besuchen Sie bitte www.samsung.com. Um die Hilfe Funktion nutzen zu können, folgen Sie diesen Schritten: 1. Mit Hilfe der ▲▼◄► Tasten Hilfe auswählen, und die EINGABE Taste drücken. 2. Die ◄► Tasten drücken um in die Hilfe zu wechseln, nachdem Sei angezeigt wird. 3. Mit Hilfe der ▲▼ Tasten den Hilfe Text scrollen. 4.
06 Sonstige Informationen Konsultieren Sie untenstehende Liste, wenn das Produkt nicht ordnungsgemäß funktioniert. Wenn das bei Ihnen auftretende Problem nicht aufgeführt ist oder die Anweisungen zu keiner Lösung führen, schalten Sie das Gerät aus, ziehen Sie das Netzkabel aus der Steckdose, und wenden Sie sich an einen autorisierten Händler vor Ort oder an den Kundendienst von Samsung. Symptom Überprüfen/Beheben Die Disk wird nicht ausgeworfen.
Sonstige Informationen Symptom Überprüfen/Beheben Das Bildseitenformat kann nicht geändert werden. • Sie können 16:9-BD/DVDs in den Formaten 16:9-Breitbild, 4:3-Letterbox oder 4:3-Pan-Scan wiedergeben. 4:3-BD/DVDs können nur im Format 4:3 wiedergegeben werden. Greifen Sie auf die Informationen an der Blu-rayDiskhülle zurück, und wählen Sie die entsprechende Funktion. • Das Produkt funktioniert nicht. (Beispiel: Das Gerät schaltet sich aus oder es sind ungewöhnliche Geräusche zu hören.
06 Überprüfen/Beheben PC Share Manager-Funktion Ich kann durch den PC Share Manager geteilte Ordner sehen, nicht aber die Dateien. • Nachdem nur den Kategorien entsprechende Bild-, Musik- und Videodateien angezeigt werden, kann es sein, dass die nicht mit diesen Kategorien übereinstimmenden Dateien nicht sichtbar sind. AllShare-Funktion Unterbrechungen bei Videowiedergabe. • Überprüfen Sie die Stabilität des Netzwerks. • Anschluss des Netzwerkkabels überprüfen und ob das Netzwerk überlastet ist.
Sonstige Informationen Technische Daten Allgemein UKW-Tuner Gewicht Abmessungen Betriebstemperaturbereich Zulässiger Luftfeuchtigkeitsbereich Signal/Rauschabstand Verwendbare Empfindlichkeit Klirrfaktor (Total Harmonic Distortion) BD (Blu-ray-Disk) DVD (digitale vielseitige Scheibe) Disk CD: 12 cm (COMPACT DISK) CD: 8cm (COMPACT DISK) Composite Video Videoausgang Komponent Video Video/Audio HDMI Ausgangsleistung der Front-Lautsprecher Ausgangsleistung des Subwoofers Verstärker Frequency Frequenzga
Kontakt zu Samsung Falls Sie Fragen oder Anregungen zu Samsung-Produkten haben, wenden Sie sich bitte an den SamsungKundendienst. Contact Centre Area ` North America Canada Mexico U.S.A Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
Korrekte Entsorgung der Batterien dieses Produkts (In den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Altbatterie-Rücknahmesystem) Die Kennzeichnung auf der Batterie bzw. auf der dazugehörigen Dokumentation oder Verpackung gibt an, dass die Batterie zu diesem Produkt nach seiner Lebensdauer nicht zusammen mit dem normalen Haushaltsmüll entsorgt werden darf.
HT-D5200 Sistema Home Entertainment Blu-ray™ 2.1 canali manuale utente immagina le possibilità Grazie per avere acquistato questo prodotto Samsung. Per ricevere un servizio più completo, registrare il prodotto all'indirizzo www.samsung.com/register HT-D5200_ITA_1226.
Informazioni sulla sicurezza Avvertenze per la sicurezza PER RIDURRE IL RISCHIO DI SCOSSE ELETTRICHE, NON RIMUOVERE IL COPERCHIO (O LA PARTE POSTERIORE). ALL'INTERNO NON VI SONO PARTI RIPARABILI DALL'UTENTE. PER LA MANUTENZIONE RIVOLGERSI AL PERSONALE DI ASSISTENZA QUALIFICATO. ATTENZIONE RISCHIO DI SCOSSE ELETTRICHE NON APRIRE Questo simbolo indica la presenza di "tensione pericolosa" all'interno del prodotto, che comporta il rischio di scosse elettriche o lesioni.
Precauzioni • Verificare che le caratteristiche degli alimentatori CA presenti in casa corrispondano all'etichetta di identificazione posta sul retro del prodotto. • Installare il prodotto orizzontalmente su un supporto adeguato (mobile), verificando che vi sia spazio sufficiente per una corretta ventilazione (7,5 - 10 cm). • Non sistemare il prodotto su amplificatori o altri dispositivi che potrebbero diventare caldi. Assicurarsi che le aperture di ventilazione non siano coperte.
Informazioni sulla sicurezza Precauzioni per la manipolazione e la conservazione dei dischi I graffi sui dischi, anche piccoli, possono ridurre la qualità dell'audio e dell'immagine o far "saltare" i dischi. Prestare particolare attenzione a non graffiare i dischi. Manipolazione dei dischi • Non toccare il lato di riproduzione dei dischi. • Tenere i dischi per i bordi, senza toccare la superficie con le dita. • Non incollare carta o nastro adesivo sui dischi.
Indice OPERAZIONI PRELIMINARI 7 7 8 12 13 13 14 15 Icone utilizzate nel manuale Tipi di dischi e caratteristiche Accessori Descrizione Pannello anteriore Pannello posteriore Telecomando CONNESSIONI 17 18 21 22 23 Collegamento degli altoparlanti Collegamento di dispositivi esterni/del televisore tramite HDMI Collegamento del nucleo toroidale in ferrite al cavo di alimentazione dell'unità principale Collegamento dell'audio da apparecchi esterni Connessione alla rete Collegamento dell’antenna FM 24 25
Indice IMPOSTAZIONE 38 38 38 38 38 38 38 39 39 40 Sicurezza Grado Blocco Can. BD Grado Blocco Can.
01 Operazioni preliminari Operazioni preliminari Icone utilizzate nel manuale Prima di leggere il manuale utente, tenere presente le seguenti indicazioni. Termine Logo Icona h z Z BD-ROM BD-RE/-R DVD-VIDEO Definizione Indica una funzione disponibile per i dischi BD-ROM. Indica una funzione disponibile per i dischi BD-RE/-R registrati in formato BD-RE. Indica una funzione disponibile per i dischi DVD-VIDEO.
Operazioni preliminari Tipi di dischi e caratteristiche Loghi dei dischi riproducibili Compatibilità dei dischi Blu-ray Blu-ray è un formato nuovo e in evoluzione. Di conseguenza è possibile che si verifichino problemi di compatibilità. Non tutti i dischi sono compatibili e non tutti i dischi verranno riprodotti. Per ulteriori informazioni, vedere la sezione Tipi di dischi e caratteristiche di questo manuale.
01 BD-RE/-R Sia il prodotto sia i dischi sono codificati in base alla regione. Per poter riprodurre un disco è necessario che i due codici corrispondano. Se i codici non corrispondono, il disco non viene riprodotto. Questi dischi Blu-ray possono essere registrati e riprodotti. Questo prodotto può riprodurre dischi BD-RE/-R registrati da altri registratori di dischi Blu-ray compatibili.
Operazioni preliminari Formato del disco Utilizzo di dischi JPEG • Possono essere riprodotti dischi CD-R/-RW, DVD-RW/-R registrati in formato UDF o JOLIET. • Possono essere visualizzati solo file JPEG con estensione ".jpg", ".JPG", ".jpeg" o "JPEG". • È supportato il formato JPEG progressivo. DVD-RW/-R (V) • Formato usato per registrare dati su dischi DVD-RW o DVD-R. Il disco può essere riprodotto su questo lettore dopo essere stato finalizzato.
01 *.vro Contenitore VRO VOB Codec video Codec audio Risoluzione MPEG2 AC3 MPEG LPCM 1920x1080 AC3 MPEG LPCM AAC 352x288 MPEG1 MPEG1 *.mpg *.mpeg MPEG2 PS H.264 1920x1080 1920x1080 AC3 AAC MP3 DD+ HE-AAC MPEG2 *.ts *.tp *.trp 352x288 H.264 TS VC1 Operazioni preliminari Estensione file 1920x1080 1920x1080 1920x1080 Restrizioni • Alcuni codec sopra riportati non sono supportati in caso di problemi di contenuti.
Operazioni preliminari Appunti sui collegamenti USB Dispositivi supportati: Supporto di memorizzazione USB, lettore MP3, foto/videocamera digitale, lettore di schede USB 1) Nessun supporto se il nome di una cartella o di un file ha una lunghezza superiore a 125 caratteri. 2) I file di sottotitoli più grandi di 300 KB non possono essere visualizzati correttamente. 3) Certi dispositivi USB o foto/videocamere digitali possono non essere compatibili con il prodotto. 4) I file system FAT16 e FAT32 sono supportati.
01 Pannello anteriore 1 2 3 4 5 6 7 8 10 9 11 Operazioni preliminari Descrizione 5V 500mA 1 TASTO DI ACCENSIONE ( 2 TASTO FUNZIONE Per selezionare i modi nella sequenza seguente: BD/DVD D. IN AUX R. IPOD H. IN1 H. IN2 FM 3 DISPLAY Mostra lo stato di riproduzione, l'ora, ecc. 4 5 6 TASTO DI ARRESTO Interrompe la riproduzione del disco. TASTO di RIPRODUZIONE/PAUSA Riproduce un disco o mette in pausa la riproduzione.
Operazioni preliminari Pannello posteriore 1 2 3 4 5 6 HDMI OUT HDMI IN 7 8 FM ANT 9 10 11 COMPONENT OUT 12 SPEAKERS OUT FRONT LAN iPod DIGITAL AUDIO IN OPTICAL WIRELESS LAN SUBWOOFER FRONT AUX IN VIDEO OUT SPEAKER IMPEDANCE : 3 1 TERMINALE LAN Può essere utilizzato per servizi di rete (vedere le pagine 55~64), BD-LIVE e aggiornamenti del software tramite una connessione di rete.
01 Descrizione del telecomando FUNCTION TV SOURCE POWER Accende e spegne il prodotto. Per passare al modo TV, premere il tasto TV. Per passare all'Home Cinema, premere il tasto BD. Premere i tasti numerici per attivare le opzioni. RECEIVER BD SLEEP Imposta un'ora di disattivazione per spegnere il prodotto. TA Per far uscire il disco. TV RDS DISPLAY 1 2 3 PTY- PTY SEARCH PTY+ 4 5 6 7 8 REPEAT 0 Per visualizzare l'immagine a schermo intero su un televisore.
Operazioni preliminari Inserimento delle batterie nel telecomando * Tipo di batterie: AAA Elenco codici marche TV Marca Codice Marca Codice Admiral (M.
02 Connessioni Connessioni Questa sezione illustra vari metodi per collegare il prodotto ad altri componenti esterni. Prima di spostare o installare il prodotto, spegnere l'apparecchio e staccare il cavo di alimentazione. Collegamento degli altoparlanti Posizionamento del prodotto Sistemarlo su un supporto, sul ripiano di un mobile o nel mobile sotto la TV.
Connessioni Collegamento dei diffusori 1. Premere verso il basso la linguetta del terminale sul retro del diffusore. 2. Inserire il filo nero nel terminale nero (–) e il filo rosso nel terminale rosso (+), quindi rilasciare la linguetta. 3. Collegare le spine sul retro del prodotto facendo corrispondere i colori delle spine con quelli dei jack.
02 corrisponda all'uscita video (HDMI, Component o composito) del prodotto. Per ulteriori informazioni su come selezionare la sorgente di ingresso video del televisore, consultare il manuale del televisore. Se il telecomando del prodotto è stato impostato per il funzionamento con il televisore, premere il tasto TV SOURCE sul telecomando e selezionare HDMI come sorgente esterna del televisore. Per vedere i video con tecnologia 3D è necessario avere una connessione HDMI.
Connessioni Rosso Verde Blu COMPONENT OUT SPEAKERS OUT METODO 1 FRONT Giallo SUBWOOFER FRONT AUX IN VIDEO OUT SPEAKER IMPEDANCE : 3 METODO 2 METODO 1: Video Component (QUALITÀ OTTIMA) Se il televisore è dotato di ingressi video Component, collegare un cavo video Component (non fornito) tra i jack di uscita video Component (PR, PB e Y) sul retro del prodotto e i jack di ingresso video Component sul televisore.
02 COMPONENT OUT FM ANT DIGITAL AUDIO IN HDMI OUT Connessioni Collegamento dell'audio da apparecchi esterni HDMI IN OPTICAL AUX IN Cavo ottico (non fornito) Set-Top Box VIDEO O Rosso Cavo audio (non fornito) Se il componente analogico esterno ha una sola uscita audio, collegarlo a sinistra o a destra. OTTICO Bianco VCR AUX OTTICO : Collegamento di un componente digitale esterno Per apparecchi con segnale digitale come ad es. ricevitore per TV via cavo/ricevitore satellitare (Set-Top Box).
Connessioni Connessione alla rete Questo prodotto consente di utilizzare servizi di rete (vedere le pagine 55~64) quali ad es. Smart Hub e BD-LIVE, e di ricevere aggiornamenti del software quando viene stabilita una connessione di rete. Si raccomanda di utilizzare un router wireless o un router IP per la connessione. Per ulteriori informazioni sul collegamento del router, consultare il manuale utente del router; per l'assistenza tecnica, contattare il produttore del router. Rete via cavo 1.
02 È possibile collegarsi alla rete con un IP sharer wireless. 1. È necessario un router AP/IP wireless per effettuare una connessione wireless alla rete. Collegare l'adattatore LAN wireless al jack dell'adattatore LAN wireless sul pannello posteriore del prodotto. 2. Per impostare le opzioni di configurazione della rete. Vedere a pagina 33.
Impostazione Impostazione iniziale 1. Accendere il televisore dopo aver collegato il prodotto. Quando si collega il prodotto al televisore e lo si accende per la prima volta, appare la schermata delle impostazioni iniziali. • Menu principale Cont. person. Video Foto Musica Funzione Dispos pers Internet Impostazioni Initial Settings | On-Screen Language Select a language for the on-screen displays.
03 DISC MENU MENU 3. Premere i tasti ▲▼ per selezionare il sottomenu desiderato, quindi premere il tasto INVIO. TITLE MENU POPUP 1 TOOLS Impostazione 2. Premere i tasti ◄► per selezionare Impostazioni, quindi premere il tasto INVIO. Impostazioni INFO 4. Premere i tasti ▲▼ per selezionare la voce desiderata, quindi premere il tasto INVIO. 3 5. Premere il tasto EXIT per uscire dal menu.
Impostazione A seconda del contenuto e della posizione Display È possibile configurare diverse opzioni di visualizzazione, quali il formato del televisore, la risoluzione, ecc. dell’immagine sullo schermo del televisore, si possono vedere delle barre nere verticali sul lato sinistro, sul lato destro o su entrambi i lati. Dim. schermo Impostazioni 3D Selezionare se riprodurre un disco Blu-ray con contenuti 3D in modo 3D.
03 BD Wise (solo prodotti Samsung) Per alcuni tipi di televisore, è possibile che si desideri regolare l'impostazione dello schermo. BD Wise è la funzione di interconnettività Samsung di ultima generazione. Quando si collegano reciprocamente un prodotto Samsung e un televisore Samsung con BD Wise tramite HDMI, e BD Wise si trova sia sul prodotto che sul televisore, il prodotto trasmette il video nella risoluzione e alla frequenza fotogrammi del disco BD/DVD.
Impostazione Risoluzione in base al modo di uscita • Riproduzione disco Blu-ray/E-Contenuti/contenuti digitali HDMI / collegato Uscita Modo HDMI HDMI / non collegato Modo Component Modo Component/ VIDEO Disco Blu-ray E-Contenuti/ contenuti digitali Modo VIDEO Disco Blu-ray E-Contenuti/ contenuti digitali BD Wise Risoluzione del disco Blu-ray 1080p@60F 576i/480i - - - Auto Risoluzione max. dell'ingresso TV Risoluzione max.
03 Se il televisore collegato al prodotto non supporta il fotogramma video o la risoluzione selezionata, appare il messaggio "Se dopo la selezione le immagini non compaiono, attendere per circa 15 secondi. In seguito, la risoluzione sarà automaticamente riportata al valore precedente. Effettuare una selezione?". Se si seleziona Sì, lo schermo del televisore diventa nero per 15 secondi, quindi la risoluzione torna automaticamente a quella precedente.
Impostazione Audio Imposta altoparlanti Impostazioni Imposta altoparlanti Display Audio | Livello Rete Distanza Se gli altoparlanti non possono essere collocati a uguale distanza dalla posizione di ascolto, è possibile regolare il ritardo dei segnali audio degli altoparlanti frontali e subwoofer. • È possibile impostare la distanza degli altoparlanti tra 0,3 m e 9,0 m.
03 I segnali audio trasmessi tramite il cavo HDMI possono essere attivati o disattivati. • Off : Il video è trasmesso solo tramite il cavo di collegamento HDMI e l'audio viene emesso solo tramite gli altoparlanti del prodotto. • On : I segnali sia video sia audio vengono trasmessi tramite il cavo di collegamento HDMI, e l'audio viene emesso solo tramite gli altoparlanti del televisore. ✎ NOTA HDMI Audio viene convertito automaticamente in 2 canali per gli altoparlanti del televisore.
Impostazione Selezione dell'uscita digitale Impostazione Connessione Bitstream Bitstream (DTS (non elaborato) ricodificato) Bitstream (Dolby D ricodificato) Ricevitore AV con Ricevitore AV con Ricevitore AV con supporto HDMI supporto HDMI supporto HDMI Ricevitore AV con supporto HDMI PCM PCM Fino a 7.1 canali PCM DTS ricodificato Dolby Digital* ricodificato Dolby Digital Fino a 7.1 canali Dolby Digital DTS ricodificato Dolby Digital* ricodificato Dolby Digital Plus Fino a 7.
03 Il video può sembrare in ritardo rispetto all'audio quando il prodotto è collegato a un televisore digitale. Se si verifica questo inconveniente, regolare il ritardo dell'audio per sincronizzarlo con il video. • È possibile impostare un ritardo dell'audio compreso tra 0 ms e 300 ms. Impostarlo al livello ottimale. Rete Prima di iniziare, contattare l’ISP per sapere se il proprio indirizzo IP è statico o dinamico.
Impostazione Per inserire le impostazioni di rete nel prodotto, seguire i passi riportati di seguito: 1. Premere i tasti ▲▼ per selezionare Cavo, quindi premere il tasto INVIO. 2. Premere i tasti ◄► per selezionare Impostazioni IP, quindi premere il tasto INVIO. Rete wireless È possibile configurare una rete wireless in tre modi: • Wireless (Generale) • Utilizzando WPS(PBC). • One Foot Connection Wireless (Generale) comprende sia le procedure di configurazione automatiche che quelle manuali.
03 Impostazioni Display Audio Impostazioni di rete Immet. chiave sicur. 0 imm. Per inserire le impostazioni di rete nel prodotto, seguire i passi riportati di seguito: 1. Eseguire i passi da 1 a 5 della procedura ‘Impostazione di una connessione di rete wireless - Auto’. Impostazione 4. Nella schermata Sicurezza, inserire la passphrase della rete. Inserire direttamente i numeri utilizzando il telecomando.
Impostazione WPS(PBC) 2. Premere il tasto INVIO. Il modo più semplice per impostare la connessione di rete wireless è utilizzare la funzione WPS(PBC) o la funzione One Foot Connection. Se il router wireless è dotato di un tasto WPS(PBC), seguire i passi riportati di seguito: 3. Posizionare il router wireless Samsung in un raggio di 25 cm dall'adattatore LAN wireless Samsung da collegare. 1. Premere i tasti ▲▼ per selezionare WPS(PBC).
03 Impostazione iniziale Con la funzione Impostazione iniziale, è possibile impostare la lingua, le impostazioni di rete, ecc. Per ulteriori informazioni sulla funzione Impostazione iniziale, vedere la sezione Impostazione iniziale di questo manuale utente. (Vedere a pagina 24) Anynet+ (HDMI-CEC) Anynet+ è una comoda funzione che permette di sintonizzare più prodotti Samsung dotati di Anynet+. Per attivare questa funzione, collegare questo prodotto a un televisore Samsung con un cavo HDMI.
Impostazione Reset Cambia password Tutte le impostazioni vengono riportate ai valori predefiniti, ad eccezione delle impostazioni di rete e di Smart Hub. Si deve inserire la password per questa funzione. Permette di modificare la password a quattro cifre utilizzata per accedere alle funzioni di sicurezza. ✎ NOTA Se non si ricorda la password La password predefinita è 0000. Lingua È possibile selezionare la lingua preferita per il menu principale, il menu del disco, ecc.
03 7. Seguire le istruzioni fornite insieme all'applicazione per il comando del prodotto. Supporto Aggiornamento software Il menu Aggiornamento software consente di aggiornare il software del prodotto per migliorare le prestazioni o per avere servizi aggiuntivi. L'aggiornamento può essere effettuato in quattro modi: • Via Internet • Tramite USB • Tramite disco • Con file scaric (File) I quattro metodi sono spiegati qui di seguito.
Impostazione Tramite disco Per eseguire l’aggiornamento via disco, seguire i passi riportati di seguito: 1. Andare al sito www.samsung.com/ bluraysupport. 2. Scaricare sul computer l’ultimo archivio zip dell’aggiornamento software tramite disco. 3. Decomprimere l’archivio zip sul computer. Deve comparire una sola cartella con lo stesso nome del file zip. 4. Scrivere la cartella su un disco. È consigliabile un CD-R o un DVD-R. 5. Finalizzare il disco prima di rimuoverlo dal computer. 6.
04 Funzioni di base traccia 1 traccia 2 traccia 3 traccia 4 traccia 5 Riproduzione 1. Inserire un disco nell’apposito vano con l’etichetta rivolta verso l’alto. 2. Premere il tasto di RIPRODUZIONE (►). • MP3, WMA, DivX, MKV e MP4 cartella (gruppo) 1 file 1 file 2 Tasti relativi alla riproduzione Funzioni di base • CD audio (CD-DA) Riproduzione di un video file 1 cartella (gruppo) 2 file 2 file 3 RIPRODUZIONE ( ►) Avvia la riproduzione. ARRESTO ( ) PAUSA ( ) Arresta la riproduzione.
Funzioni di base Utilizzo del menu Titolo Utilizzo delle funzioni di ricerca e salto Z 1. Durante la riproduzione, premere il tasto TITLE MENU sul telecomando. 2. Premere i tasti ▲▼◄► per effettuare la selezione desiderata, quindi premere il tasto INVIO. TITLE MENU POPUP Ricerca della scena desiderata hzZyx ✎ NOTA A seconda del disco, le voci del menu potrebbero variare e questo menu potrebbe non essere disponibile.
04 Funzioni di base Riproduzione al rallentatore/ fotogramma per fotogramma Ripetizione > Off Riproduzione al rallentatore hzZyx 3. Per ritornare alla riproduzione normale, premere di nuovo il tasto REPEAT. • In modo pausa ( ), premere il tasto di RICERCA (). Se si preme il tasto di RICERCA (), la velocità di riproduzione viene ridotta a * 1/8 * 1/4 * 1/2 • Per tornare alla velocità di riproduzione normale, premere il tasto di RIPRODUZIONE (►).
Funzioni di base Se il disco Blu-ray ha una sezione Utilizzo del tasto TOOLS Durante la riproduzione è possibile attivare il menu del disco premendo il tasto TOOLS. TOOLS • Schermata del menu STRUMENTI Strumenti Ricerca titolo Ricerca capitoli Ricerca durata Impostazioni immagine Audio EQ Utente Sottotitoli Angolo 1/2 : 1/20 : 00:00:13/01:34:37 : Normale : 1/4 ENG Multi CH : : BONUSVIEW, vengono visualizzate anche le informazioni sul modo principale/secondario.
04 x • È necessario avere un po' di esperienza di estrazione e editing di video per usare questa funzione correttamente. • Per utilizzare la funzione Didascalie, salvare il file con le didascalie (*.smi) con lo stesso nome del file DivX (*.avi) e nella stessa cartella. Esempio. Root Samsung_007CD1.avi Samsung_007CD1.smi • Per il nome del file è possibile utilizzare fino a 60 caratteri alfanumerici o 30 caratteri dell'Asia orientale (caratteri a 2 byte come il coreano e il cinese).
Funzioni di base Ascolto di musica 7 Tasto INVIO : Riproduce la traccia selezionata. 8 Tasto ► : Durante la riproduzione, si sposta alla pagina successiva dell'elenco dei file musicali o alla traccia successiva della playlist. Tasto ◄ : Durante la riproduzione, si sposta alla pagina precedente dell'elenco dei file musicali o alla traccia precedente della playlist. 9 Tasto ARRESTO : Arresta una traccia. 0 Tasto $ : Riproduce la traccia successiva. ! Tasto # : Riproduce la traccia precedente.
04 Ripetere un CD audio (CD-DA) /MP3 1. Inserire un CD audio (CD-DA) o un disco MP3 nel vano del disco. • Per i CD audio (CD-DA), viene riprodotta automaticamente la prima traccia. • Per i dischi MP3, premere i tasti ◄► per selezionare Musica, quindi premere il tasto INVIO. Elementi della schermata CD audio (CD-DA)/MP3 1 2 3 1. Durante la riproduzione di una playlist, premere il tasto REPEAT. REPEAT 2. Selezionare il modo di riproduzione desiderato premendo ripetutamente il tasto REPEAT.
Funzioni di base CD audio | Musica Modo audio 1/2 Pagina Voci selezionate : 3 Traccia 001 Traccia 002 00:43 03:56 Traccia 003 Traccia 004 04:41 04:02 Traccia 005 Traccia 006 03:43 03:40 Traccia 007 Traccia 008 04:06 03:52 Funzione DSP (Processore di segnale digitale) È possibile selezionare il modo per ottimizzare l’audio in base alle preferenze personali. DSP Premere il tasto DSP. Chiudi mod Modif ( ) Pagina Strumenti " Seleziona ' Ritorna 5.
04 Riproduzione di un'immagine Inserendo il lettore iPod nella basetta dock per iPod già collegata al sistema, i file video nel lettore iPod possono essere riprodotti sul televisore collegato. Se il segnale video non sincronizza correttamente con il segnale audio, premere il tasto iPod SYNC sul telecomando per correggere la sincronizzazione. B G Visualizzazione di file foto Funzioni di base iPod SYNC 1. Collegare una memoria USB che contiene file JPEG o inserire un disco che contiene file JPEG. 2.
Funzioni di base • Musica di sottofondo : Selezionare questa opzione se si desidera ascoltare musica mentre vengono visualizzate le immagini. • Impostazione musica di sottofondo : Selezionare questa opzione per impostare la musica di sottofondo. • Zoom : Selezionare questa opzione per ingrandire l'immagine corrente. (Ingrandimento fino a 4x) • Ruota : Selezionare questa opzione per ruotare l'immagine. (l'immagine verrà fatta ruotare in senso orario o antiorario).
04 Utilizzo dei tasti del telecomando 1. Premere il tasto FUNCTION per selezionare FM. 2. Selezionare la stazione desiderata. • Sintonizzazione preimpostata 1: È necessario innanzitutto aggiungere una frequenza preimpostata desiderata. Premere il tasto di ARRESTO () per selezionare PRESET e quindi ) per premere il tasto TUNING/CH ( selezionare la stazione preimpostata.
Funzioni di base Per visualizzare i segnali RDS Per ricercare un programma usando È possibile visualizzare sul display i segnali RDS inviati dalle stazioni. i codici PTY Premere il tasto RDS DISPLAY durante l'ascolto di una stazione FM. RDS DISPLAY 1 • Ogni volta che si preme il tasto, il display mostra in sequenza le seguenti informazioni: PS NAME RT CT Frequenza PS (Servizio di programma) Durante la ricerca, viene visualizzato , quindi vengono visualizzati i nomi delle stazioni.
04 Funzioni di base Collegamento dell'iPod/iPhone utilizzando il cavo USB Cont. person. Video Dispositivo connesso Se il sistema è collegato a un iPod/iPhone, si può riprodurre la musica sull'iPod/iPhone utilizzando il sistema. Photos iPod Funzione Music My Devices Internet Impostazioni " Conferma ' Ritorna 5V 500mA d WPS(PBC) ASC IN 50 1. Collegare l'iPod/iPhone alla porta USB anteriore utilizzando il cavo USB. • L'iPod si accende automaticamente.
Funzioni di base 6. Selezionare il file video da riprodurre. - È possibile utilizzare il telecomando o il prodotto per controllare semplici funzioni di riproduzione come quelle dei tasti RIPRODUZIONE, PAUSA, ARRESTO, # /$ e /. (vedere a pagina 15). ✎ NOTA "Made for iPod" ✎ NOTA Per poter visualizzare i video sull'iPod, l'uscita VIDEO (Composito) deve essere collegata al televisore (vedere a pagina 20).
05 Servizi di rete Prima di utilizzare qualsiasi servizio di rete, leggere le seguenti istruzioni. 1. Collegare il prodotto alla rete. (Vedere le pagine 22~23) 2. Configurare le impostazioni di rete. (Vedere le pagine 33~36) Utilizzo di Smart Hub Utilizzando Smart Hub, da Internet è possibile vedere filmati e video e ascoltare musica in streaming, accedere a diverse applicazioni gratuite e a pagamento e visualizzarle sul televisore.
Servizi di rete Smart Hub in breve 1 2 3 4 6 Guida di navigazione : Visualizza i tasti del telecomando utilizzabili per navigare in Smart Hub. • ROSSO (A) : Per effettuare il login a Smart Hub. • VERDE (B) : Per ordinare le applicazioni. • GIALLO (C) : Per modificare le applicazioni. • BLU (D) : Per cambiare le impostazioni di Smart Hub. 7 Le mie applicazioni : Visualizza la galleria personale di applicazioni in cui è possibile aggiungere, modificare ed eliminare.
05 Creazione di un account Attraverso il telecomando è possibile utilizzare il tastierino a video per inserire lettere, numeri e simboli. Per stabilire una propria configurazione esclusiva di Smart Hub, creare il proprio account Smart TV. Per creare un account, seguire i passi riportati di seguito: 1 1 2 3 .,– abc def 4 5 6 mno ghi jkl 7 8 9 pqrs tuv wxyz 1. Premere il tasto ROSSO (A) sul telecomando. Si apre la schermata di accesso.
Servizi di rete 8. 9. A operazione ultimata, premere il tasto INVIO per selezionare OK, quindi premere nuovamente il tasto INVIO. Riappare la schermata di accesso. Selezionare Conferm. password, quindi premere il tasto INVIO. 2. Selezionare FrecciaGiù vicino al campo ID Smart TV, quindi premere il tasto INVIO. 3. Selezionare l’ID dall’elenco che appare, quindipremere il tasto INVIO. Riappare la schermata di accesso. 4. Selezionare Password, quindi premere il tasto INVIO.
05 Se esistono degli account con uno dei provider elencati dalla funzione Account servizio di registrazione, è possibile associare l’account del provider e la relativa password all’account Smart TV. Se l’account viene associato, è possibile accedere facilmente all’account attraverso Smart Hub, senza inserire il nome dell’account o la password. Per utilizzare la funzione Registra account di servizio, seguire i passi riportati di seguito: 1.
Servizi di rete Per utilizzare la funzione Ripristina, seguire i passi riportati di seguito: 1. Nel menu Gestione account, selezionare Ripristina, quindi premere il tasto INVIO. Si apre la schermata Ripristina. 2. Inserire la password di sicurezza. Questa è la password inserita se è stato impostato un grado di blocco canale BD o DVD (vedere a pagina 38). In caso contrario, inserire 0000. 3. Dopo alcuni istanti, Smart Hub viene ripristinato automaticamente.
05 La funzione Nuova cartella consente di creare e rinominare nuove cartelle. Dopo aver creato una cartella, è possibile spostarvi all’interno un’applicazione. Per utilizzare la funzione Nuova cartella, seguire i passi riportati di seguito: 1. Premere il tasto GIALLO (C) sul telecomando. 2. Premere ▲▼◄► per spostare il cursore su Nuova cartella e quindi premere il tasto INVIO. Appaiono la finestra Nuova cartella e un tastierino. 3.
Servizi di rete Blocco Elimina La funzione Blocco consente di bloccare alcune applicazioni di Le mie applicazioni in modo che siano accessibili solo inserendo il codice di blocco minori. Per utilizzare la funzione Blocca, seguire i passi riportati di seguito: La funzione Elimina consente di eliminare l’applicazione da Le mie applicazioni. Per utilizzare la funzione Elimina, seguire i passi riportati di seguito: 1. Premere il tasto GIALLO (C) sul telecomando. 2.
05 Per scaricare le applicazioni a pagamento, è necessario creare un account Samsung e aggiungere una carta di credito all’account. Per creare un account Samsung, visitare il sito www.samsung.com: ✎ NOTA Alcuni Paesi potrebbero non disporre di questo servizio. Accesso alla schermata delle applicazioni Samsung Per accedere alle applicazioni Samsung, premere i tasti ▲▼◄► per navigare nell’area Appl. Samsung sulla schermata principale Smart Hub, quindi premere il tasto INVIO. Si apre la schermata Appl.
Servizi di rete Guida BD-LIVE™ In caso di domande su Appl. Samsung, consultare innanzitutto la Guida. Se nessuno dei consigli risulta essere d’aiuto, visitare il sito www. samsung.com. Per utilizzare la funzione Guida, seguire i passi riportati di seguito: 1. Premere i tasti ▲▼◄► per selezionare Guida, quindi premere il tasto INVIO. 2. Premere ◄► per accedere alla Guida, una volta visualizzata. 3. Premere ▲▼ per scorrere il testo della Guida. 4. Premere ◄ per uscire dalla Guida.
06 Se il prodotto non funziona correttamente, consultare la tabella che segue. Se il problema non è elencato nella tabella o se le istruzioni fornite non portano a una soluzione, spegnere il prodotto, scollegare il cavo di alimentazione e contattare il rivenditore autorizzato più vicino o il Centro di assistenza di Samsung Electronics. Sintomo Controlli/rimedi Non si riesce ad estrarre il disco. • Il cavo di alimentazione è ben collegato alla presa? • Spegnere l'unità, quindi riaccenderla.
Altre informazioni Sintomo Controlli/rimedi Il formato non può essere cambiato. • È possibile riprodurre i BD/DVD 16:9 in modo 16:9 Wide, 4:3 Letter Box o 4:3 Pan modo scansione, ma i BD/DVD 4:3 possono essere visti solo in formato 4:3. Selezionare la funzione appropriata in base alla copertina del disco Blue-ray. • Il prodotto non funziona. (esempio: L'apparecchio si spegne o si sentono strani rumori). • Il prodotto non funziona in modo normale.
06 Controlli/rimedi Funzione PC Share Manager Si vedono le cartelle condivise in PC Share Manager, ma non i file. • Poiché vengono visualizzati soltanto i file che corrispondono alle categorie Immagine, Musica e Filmato, i file che non corrispondono a queste categorie potrebbero non essere visualizzati. Altre informazioni Sintomo Funzione AllShare Il video viene riprodotto in modo intermittente. • Verificare che la rete sia stabile.
Altre informazioni Specifiche Peso Dimensioni Temperatura di esercizio Umidità di esercizio Rapporto segnale/rumore Sensibilità utile Distorsione armonica totale BD (disco Blu-ray) 3,5 kg 429,3 (L) x 58,4 (A) x 325,1 (P) mm Generale da +5°C a +35°C da 10 % a 75 % 55 dB Sintonizzatore FM 12 dB 0,5 % Velocità di lettura: 9,834 m/sec Velocità di lettura: 6,98 ~ 7,68 m/sec. DVD (Digital Versatile Disc) Tempo approssimativo di riproduzione (Lato singolo, strato singolo): 135 min.
English Avis Cinavia : This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be in interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com.
Français Avis de Cinavia : Ce produit utilise la technologie Cinavia pour limiter l'utilisation de copies non autorisées de certains films et vidéos commerciaux ainsi que leurs bandes son. Lorsqu'une copie non autorisée est détectée, un message est affiché et la lecture ou la copie est interrompue. Des informations complémentaires concernant la technologie Cinavia sont disponibles sur le site http:// www.cinavia.com du Centre d'information consommateur Cinavia.
Suomi Cinavia-ilmoitus: Tämä tuote käyttää Cinaviatekniikkaa rajoittaakseen joidenkin kaupallisesti tuotettujen elokuvien ja videoiden sekä niiden ääniraitojen luvattomien kopioiden käyttöä. Kun luvattoman kopion kielletty käyttö tunnistetaan, viesti tulee näkyviin ja toisto tai kopiointi keskeytetään. Saat lisätietoja Cinavia-tekniikasta Cinavia Online Consumer Information Centre -kuluttajakeskuksesta osoitteessa http://www.cinavia.com.
Polski Komentarz Cinavia : Urządzenie to korzysta z technologii Cinavia w celu ograniczenia wykorzystania nieupoważnionych kopii pewnych filmów i obrazów wideo wyprodukowanych w celach komercyjnych, oraz ich ścieżek dźwiękowych. W przypadku wykrycia zakazanego użycia nieautoryzowanej kopii, zostanie wyświetlony komunikat i proces odtwarzania i kopiowania zostanie zatrzymany. Więcej informacji o technologii Cinavia można uzyskać w Centrum obsługi klienta Cinavia online: http:// www.cinavia.com.
Hrvatski Obavijest o tehnologiji Cinavia : ovaj proizvod rabi tehnologiju Cinavia kako bi se ograničila uporaba neovlaštenih kopija nekih komercijalno proizvedenih filmova i videozapisa i njihovih zvučnih zapisa. Kada se otkrije zabranjena uporaba neovlaštene kopije, prikazat će se poruka i prekinut će se reproduciranje i kopiranje. Ostale informacije o tehnologiji Cinavia dostupne su u mrežnom informacijskom centru za korisnike tvrtke Cinavia na http://www.cinavia. com.
繁體中文 Cinavia 聲明:本產品使用 Cinavia 技術來限制 使用某些商業製造的電影和視訊及其聲道的未經授權副本。當偵測 到禁止使用的未經授權副本時,將會顯示一則訊息,並且播放或複 製動作將會中斷。 Cinavia 技術的詳細資訊在 Cinavia 線上消費者資訊中心中提供,網址為:http://www. cinavia.com。若要透過郵件請求關於 Cinavia 的其他資訊,請將含有您的郵寄地址的明信片寄往:Cinavia Consumer Information Centre, P.O. Box 86851, San Diego, CA, 92138, USA.
Tiếng Việt Thông báo của Cinavia: Sản phẩm này sử dụng công nghệ Cinavia để hạn chế việc sử dụng các bản sao trái phép một số bộ phim và video được sản xuất thương mại và các đoạn âm thanh của chúng. Khi bị phát hiện sử dụng bản sao trái phép, một thông báo sẽ được hiển thị và việc phát lại hoặc sao chép sẽ bị gián đoạn.
Contatta SAMSUNG WORLD WIDE Se avete commenti o domande sui prodotti Samsung, contattate il Servizio Clienti Samsung. Contact Centre Area ` North America Canada Mexico U.S.A Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
Corretto smaltimento delle batterie del prodotto (Applicabile nei paesi dell’Unione Europea e in altri paesi europei con sistemi di conferimento differenziato delle batterie.) Il marchio riportato sulla batteria o sulla sua documentazione o confezione indica che le batterie di questo prodotto non devono essere smaltite con altri rifiuti domestici al termine del ciclo di vita.