DIGITAL HOME THEATER SYSTEM HT-DB120 SAMSUNG ELECTRONICS AMERICA, INC. SERVICE DIVISION 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) www.samsungusa.com Instruction Manual OPEN/CLOSE DIMMER DVD REMAIN TUNER BAND AUX EZ VIEW SLOW MO/ST SUB TITLE STEP DSP/EQ REPEAT TUNING VOLUME U MEN INFO PL II EFFECT E UT M RE TU RN PL II MODE ENTER TEST TONE SOUND EDIT TUNER MEMORY P.SCAN COMPACT VIDEO Downloaded From TheatreSystem-Manual.
Safety Warnings CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Instructions RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the appliance and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. WATER AND MOISTURE Do not use this video product near waterforexample, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Features Contents PREPARATION PREPARATION Multi-Disc Playback & AM/FM Tuner The HT-DB120 combines the convenience of multi-disc playback capability, including DVD, CD, MP3-CD, CD-R, CD-RW, and DVD-RW, with a sophisticated AM/FM tuner, all in a single player. Safety Warnings..................................................................................................................................................................1 Precautions ..........................................................
Notes on Discs VIDEO surround sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall. Disc Recording Format CD-R Discs • Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs 1 ~ 6 DVD players and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.
Description Play/Pause ( Power ( ) button Stop ( ) button —Rear Panel— ) button S-Video Output Connector Video Output Connector Function button Connect the TV's video input jacks (VIDEO IN) to the VIDEO OUT connector. Open/Close button If the TV is equipped with an S-Video input connector (S-VIDEO IN), connect it to the player's S-Video output jack. External Digital Component Input Connector Use this to connect external equipment capable of digital output.
Description DVD POWER button DIMMER button OPEN/CLOSE button Insert Remote Batteries 1 REMAIN button OPEN/CLOSE DIMMER REMAIN DVD TUNER BAND AUX EZ VIEW SLOW MO/ST SUB TITLE STEP DSP/EQ REPEAT DVD button EZ VIEW button STEP button DSP/EQ button AUX button TUNER BAND button SUB TITLE button SLOW, MO/ST button REPEAT button Play/Pause button TUNING PL II EFFECT PL II MODE button INFO U MEN Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and –).
Connecting the Speakers Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Front Speaker (L) Front Speaker (R) C L R White LS Green Red RS the TV stand. Gray Blue Purple Position of the DVD Player • Place it on a stand or cabinet shelf, or under CONNECTIONS Center Speaker SW Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Connecting the Video to TV P.SCAN(Progressive Scan) Function Unlike a regular Interlace Scan in which two fields of picture information are alternated to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines. down for a minimum of 1 second. • The previous mode is indicated in the display first, followed by the selected mode in about a second.
Connecting External Components Connecting an External Analog Component Example: Digital signal components such as a DVD or CD Recorder. Example: Analog signal components such as a VCR, Camcorder, and TV. CONNECTIONS Connecting an External Digital Component Optical Cable (not included) Audio Cable If the external analog component has only one Audio Out, connect either left or right. DIGITAL OUT L 1 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
Connecting the Antennas FM antenna connection AM(MW) antenna connection 1 2 3 CONNECTIONS If AM reception is poor, connect an outdoor AM antenna(not supplied). AM Loop Antenna (supplied) Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna. FM Antenna (supplied) 1 2 Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.
Disc Playback Displaying Disc Information You can view playback information on the disc on the TV screen. 1 3 Press OPEN/CLOSE button to open the disc tray. 2 Load a disc. Press INFO button. • Each time the button is pressed, the display changes as follows: • Place a disc gently into the tray with the disc’s label facing up. DVD Press OPEN/CLOSE button to close the disc tray. DVD • Playback starts automatically. CD will appear on the TV screen. • stop position will be stored in memory.
Fast/Slow Playback Fast Playback Press and hold DVD CD . • Each time the button is held down during playback, the playback speed changes as follows: MP3 Skipping Scenes/Songs DVD CD MP3 Briefly press . • Each time the button is pressed briefly during playback, the previous or next chapter, track, or directory (file) will be played. • But, you cannot skip chapters consecutively.
Repeat Playback A-B Repeat Playback Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file). DVD CD MP3 JPEG DVD Press REPEAT button. 1 • Each time the button is pressed during playback, the repeat playback mode changes as follows: DVD MP3 JPEG Repeat Playback Options CD Press INFO button twice. 2 Press Cursor button to move to REPEAT PLAYBACK display. 4 Press ENTER button at the end of the desired segment. • For a CD, press INFO button once.
Angle Function Zoom Function This function allows you to view the same scene in different angles. This function allows you to enlarge a particular area of the displayed image. Zoom (Screen Enlarge) Function DVD 1 Press INFO button. 2 Press Cursor button to move to ANGLE display. 1 Press ZOOM button. 2 Press Cursor , , , buttons to move to the area you want to enlarge. DVD 3 Press ENTER button.
Moving Directly to a Scene/Song Selecting Audio/Subtitle Language Audio Language Selection Function 1 Press INFO button twice. 2 DVD DVD Press Cursor , buttons or numeric buttons to select the desired audio language. 1 CD Moving to a Title/Track Press INFO button. 2 Moving to a Chapter Press Cursor , buttons or numeric buttons to select the desired title/track and then press ENTER button. 3 Press Cursor , buttons to move to Chapter display.
JPEG File Playback JPEG Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this DVD player. Slide Mode Digest Function You can view 9 JPEG images on the TV screen. 1 1 Place the JPEG disc on the disc tray. Press DIGEST button during playback. 2 • JPEG files will be shown in • The selected image is played for 5 seconds before moving to 9 windows. Press the OPEN/CLOSE button. • Playback starts automatically.
Using Disc Menu Using the Title Menu You can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc. For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, this function may either not work at all or may work differently. DVD 1 Press MENU button. DVD 2 Press Cursor , buttons to move to ‘DISC MENU’ and then press ENTER button.
