User Manual

1615
CONNECTIONS
Press AUX on the remote control to select AUX 1 or AUX 2.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
Connect Video Out on the DVD player to Video In on the TV.
1
Connect Video In on the DVD player to Video Out on the external analog component.
2
3
4
VOLTAGE
SELECTOR
L
R
VIDEO OUT
Example: Analog signal components such as a VCR, Camcorder, and TV.
Connecting an External Analog Component
Audio Cable
If the external
analog component
has only one Audio
Out, connect either
left or right.
Press AUX on the remote control to select ‘DIGITAL IN’.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Connecting External Components
Connect Video Out on the DVD player to Video In on the TV.
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
2
3
VOLTAGE
SELECTOR
DIGITAL OUT
VIDEO IN
Example: Digital signal components such as a Combo or CD Recorder.
Connecting an External Digital Component
Optical Cable
(not included)
The AC Cord must be plugged into
an appropriate socket.
Before plugging your system into an
AC outlet, you must check the
voltage.
Check the position of the voltage
selector on the rear of the system
(OPTIONAL).
1. Plug the AC Cord on the rear of the
system into an appropriate outlet.
2. Press the On/Standby button to
switch your DVD Player system on.