User Manual

2423
CONNECTIONS
Press and hold DCDi button on the remote
control for over 3 seconds.
•
Each time the button is pressed, the selection alternates between
DCDi ON and DCDi OFF.
Converts the interlace signal to progressive to prevent flickering and to
remove distortion or noise on the edge of screen.
DCDi (Directional Correlational Deinterlacing) Function
You can adjust the resolution switch to set the HDMI and component (PR, PB, Y) output resolution to
480p/720p/1080i.
Example: If the TV supports resolution up to 480p
•
If you connect the DVI and Component outputs (PR, PB, Y) at the same time, Component output resolution changes
automatically to the designated DVI resolution.
Caution
Selecting Resolution
Set the resolution switch to 480p.
•
A 480p video signal is output through the DVI and
component outputs (P
R, PB, Y).
1
• If copy protection is in place, output resolution is automatically converted to 480p when you play the DVD,
even if you set the resolution to 720p or 1080i.
Note
Connecting the Video Out to TV
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Analog signal components such as a VCR or TV.
Press AUX on the remote control to select ‘DIGITAL IN / AUX1 / AUX 2’.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Connecting External Components
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
1
3
DIGITAL OUT
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Connecting an External Digital / Analog
Component
Optical Cable
(not included)
Audio Cable
If the external analog
component has only one
Audio Out, connect either
left or right.
•
If you have connected an external digital component and an Analog component to Video In (1, 2) at the
same time, there will be video from AUX 1 even when you select DIGITAL IN.
•
If you have connected Audio In (L, R) to 1, connect Video In to 1. If you have connected Audio In (L, R)
to 2, connect Video In to 2.
•
When you select Aux 1 or 2, you are selecting Video 1 or 2 inputs respectively.
Note