User Manual

Speaker Assembly Method
The speakers can be installed on stands or a wall, depending whether the RRSS or SDSM
speaker installation configuration is used.
Read the following instructions on speaker assembly car
efully and install the speakers correctly.
Check the components before assembling and installing the speakers.
Front Speaker (2EA) Rear Speaker (2EA) Center Speaker
Front Stand (2EA) Rear Stand (2EA) Front Speaker Cover (2EA)
Subwoofer
Speaker Components
Brackets (2EA) Speaker wires (6EA) Screws (2EA)
Speaker Accessories
•
If you install it the rear speaker on the front speaker,, you can adjust the rear speaker's angle by rotating it 30° to the right or left.
Note
• The speaker wires can be connected to either the front stand or the front Speaker.
arrangement.
Note
1413
Installing speakers in the RRSS (Rear Reflecting Surround System) Configuration using stands
Installing speakers on Front stands
Follow the instructions and install the
speaker as shown below.
Install the front
speaker on the front
stand.
1
Front Speaker
Front Stand
Connect the rear
speaker wire and
front speaker wire to
the rear of front
stand.
2
Phillips
Screwdriver
Install the rear
speaker on the front
speaker.
3
Rear Speaker
Front Speaker
Turn the screw
on the rear of
front speaker to
fasten it.
4
CONNECTIONS
Rear Speaker wire
Front Speaker wire