user manual

English 25
|
04 Settings
❑
Manual
If you have a static IP address or the Automatic
procedure does not work, you’ll need to set the
Network Settings values manually.
Settings
Display
Audio
Network
System
Language
Security
General
Support
Wired Network Settings
Internet Protocol Setup : Manual \
IP Address :
0 0 0 0
Subnet Mask :
255
255 255 0
Gateway :
0
0 0 0
DNS : Manual
DNS Server :
0
0 0 0
> Move " Select
'
Return
1 . Follow the first four steps in the Automatic
procedure, but select Manual instead of Auto
in Step 4.
2 . Press the ▼ arrow button to go to the first
entry field (IP Address).
3 . Use the number buttons on your remote to
enter numbers.
4 . When done with each field, use the ► button
to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
5 . Enter the IP Address, Subnet Mask, and
Gateway values.
6 . Press the ▼ button to go to DNS.
7 . Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above.
8 . Press the RETURN (
'
) button on your
remote.
9 . Select Network Status, and then press
v
.
10 . The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When it is
done, highlight OK, and then press
v
.
| NOTE |
\
You can get the Network values from your Internet
provider. You can also view these values on most Windows
computers. For instructions, see "Getting the Network
Setting Values" on this page.
< Getting the Network Settings Values >
You can view your Network Settings values on
most Windows computers. To view the Network
Settings values, follow these steps:
• Windows XP
1 · Right click the Network icon on the bottom
right of the Windows desktop.
2 · In the pop-up menu, click Status.
3 · On the dialog that appears, click the Support
tab.
4 · On the Support tab, click the Details button.
The Network settings are displayed.
• Windows 7
1 · Click the Network icon on the bottom right of
the Windows desktop.
2 · In the pop-up menu, click Network and
Sharing Center.
3 · On the dialog that appears, click the Local
Area Connection.
4 · On the Support tab, click the Details button.
The Network settings are displayed.
| NOTE |
\
Depending on your Windows version, the information may
differ.