HT-E5200 2.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-E5200_XU_0223.
Safety Information Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Disc Storage & Management 01 Safety Information • Holding Discs - Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping. - Avoid touching the surface of a disc where data has been recorded. - Hold the disc by the edges so that fingerprints will not get on the surface. - Do not stick paper or tape on the disc. • Cleaning Discs - If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.
Safety Information • Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury. • If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the product’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.
Safety Information • Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. • Open Source Licence Notice - In the case of using open source software, Open Source Licences are available on the product menu. 01 • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents SAFETY INFORMATION 2 3 3 3 4 4 Warning Disc Storage & Management Handling Cautions Using the 3D Function Copyright Licence SETTINGS 21 23 23 24 29 33 MEDIA PLAY GETTING STARTED 7 8 11 12 12 13 Disk and Format Compatibility Logos of Discs the product can play Accessories Front Panel Rear Panel Remote Control CONNECTIONS 15 15 15 16 17 17 17 17 18 18 18 19 19 19 19 20 20 20 Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit Connecting the Speakers Speaker Components Connect
Getting Started Disk and Format Compatibility 02 Disc types and contents your product can play Disc Type Blu-ray Disc 3D Blu-ray Disc VIDEO DVD-VIDEO, DVD-RW, DVD-R, DVD+RW, DVD+R Details BD-ROM or BD-RE/-R disc recorded in the BD-RE format. DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalised, or a USB storage media containing DivX, MKV, MP4 contents.
Getting Started Region Code Logos of Discs the product can play Both products and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this product is displayed on the rear panel of the product. Disc Type Blu-ray Disc DVD-VIDEO Region Code Area A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
Video File Support *.avi AVI *.mkv MKV *.asf ASF *.wmv WMV (wmv9) *.mp4 MP4 *.3gp 3GPP *.vro *.mpg *.mpeg *.ts *.tp *.trp Video Codec Resolution Frame rate (fps) Bit rate (Mbps) DivX 3.11/4.x /5.1/6.0 1920x1080 6 ~ 30 8 MP3 AC3 LPCM DTS Core H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 DivX 3.11/4.x /5.1/6.0 1920x1080 6 ~ 30 8 H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 DivX 3.11/4.x /5.1/6.0 1920x1080 6 ~ 30 8 H.
Getting Started - The Seek (skip) function is not available if the file’s index table is damaged. - When you playback a file remotely through a network connection, video playback may stutter depending on the network speed. Video decoder - Supports up to H.264 Level 4.1 - Does not support H.
| NOTE | Some AVCHD format discs may not play, depending on the recording conditions. 02 AVCHD format discs need to be finalised. Getting Started “x.v.Colour” offers a wider colour range than normal DVD camcorder discs. Some DivX, MKV and MP4 format discs may not play, depending on their video resolution and frame rate. Accessories Check for the supplied accessories below.
Getting Started Front Panel PLAY/PAUSE ENTER STOP OPEN/CLOSE VOLUME CONTROL FUNCTION 5V 500mA DISPLAY DISC TRAY POWER USB HOST REMOTE CONTROL SENSOR | NOTE | To upgrade the product's software through the USB Host jack, you must use a USB memory stick. When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the E button.
Remote Control 02 Tour of the Remote Control FUNCTION TV SOURCE To change to TV mode, press the TV button. Press numeric buttons to operate options. SLEEP BD TV RDS DISPLAY TA 1 2 3 PTY- PTY SEARCH PTY+ 4 5 6 7 8 TITLE MENU Press to view the disc menu. 0 POPUP Press to stop/play a disc. MUTE VOL S/W LEVEL TUNING / CH Press to move to the Home screen. FULL SCREEN HOME REPEAT Press this to see the full screen on a TV.
Getting Started Installing batteries in the Remote Control Battery size: AAA 1 2 | NOTE | Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. Assuming typical TV usage, the batteries last for about one year. The remote control can be used up to approximately 7 meters from the product in a straight line. Setting the Remote Control You can control certain functions of your TV with this remote control.
Connections This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. 03 SPEAKERS OUT IMPEDANCE : 3 If you attach a Toroidal ferrite core to the power cord of the main unit, it will help to prevent RF interference from radio signals. Connections Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit 1.
Connections Connecting The Speakers 1. Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to the coloured sticker on the bottom of each speaker. 2. To attach speaker wire to each speaker: a. Press down the red tab on the back of the speaker, insert the red wire, and then release the tab. Black Red b. Press down the black tab on the back of the speaker, insert the black wire, and then release the tab. 3.
Connecting the FM Antenna 03 FM Antenna (supplied) Connections AUX IN VIDEO OUT IMPEDANCE : 3 SPEAKERS OUT OPTICAL iPod LAN HDMI OUT HDMI IN 1 2 DIGITAL N AUDIO IN FM ANT 1 . Connect the FM antenna supplied to the FM ANTENNA Jack. 2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. | NOTE | This product does not receive AM broadcasts.
Connections Connecting to a TV Select either Method 1 or Method 2. • If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control, and then select the correct external source from the TV's source list (HDMI, Video In, etc.) to view video from the home cinema.
Connecting to External Devices W Red AUX IN White AUX IN VIDEO OUT VIDEO OUT IMPEDANCE : 3 SPEAKERS OUT Connections R 03 To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD D. IN AUX R. IPOD HDMI1 HDMI2 FM BT OPTICAL 1 OPTICAL iPod LAN HDMI OUT 1 HDMI IN 2 DIGITAL AUDIO IN HDMI IN DIGITAL AUDIO IN 2 FM ANT FM ANT (Cable not supplied.) Method 3 (Cable not supplied.
Connections Connecting to a Network Router Wireless Network You can connect your product to your network router using one of the methods illustrated below.
Settings The Initial Settings Procedure If you skip wireless network setup here, go to "Wireless Network" on page 30 to set up the product's wireless network connection later. 5 . The product searches for and then displays all available wireless router network connections. Initial Settings > Network Settings (2/5) Select your wireless router from the list.
Settings | NOTE | Enter numbers by pressing the number buttons on your remote. Enter letters by selecting a letter using the ▲▼◄► buttons, and then press E button. To display capital letters (or redisplay small letters if capital letters are displayed), select A/a, and then press the E button. To display symbols and punctuation, select , and then press the E button. To redisplay letters, select , and then press the E button. 9 .
| NOTE | 2 3 4 1 Function Settings d WPS(PBC) 5 1 Smart Hub. Starts Smart Hub. From Smart Hub, you can access YouTube, games, and other apps. 2 AllShare Play. Play videos, photos or music content from Disc, USB, PC or mobile devices. 3 Function. Select the audio/video input source. 4 Settings. Set various functions to suit your personal preferences. 5 Displays the coloured buttons on your remote that you can press to access or perform functions. Selecting an Option on the Home Screen 1 .
Settings Settings Menu Functions Display 3D Settings Set up the 3D related functions. 3D Blu-ray Playback Mode: Select whether to play a Bluray Disc with 3D contents in 3D Mode. If you move to the Home or Smart Hub Home menu while in 3D mode, the product will switch to 2D automatically. Screen Size: Enter the size of the TV attached to the product. The product will automatically adjust the 3D output to the screen size of the TV.
Audio You can set the speaker options. Equaliser Let you configure the Equaliser settings manually. 04 Speaker Settings Lets you set the product so that the volume remains stable when a scene change occurs or when you change the channel. Speaker Selection Lets you select which speakers you want active, either the TV's speakers or the Home cinema's speakers. Settings Smart Volume Audio Return Channel Lets you direct the sound from the TV to the Home Cinema speakers.
Settings Network Network Settings For more information about Network Settings and network functions, see "Networks and the Internet" starting on page 29. Network Status Let you check whether a connection to the network and the Internet have been established. Wi-Fi Direct Lets you connect a Wi-Fi Direct device to the product using a Peer-to-Peer network, without a wireless router. You can use the device to control the product.
System Initial Settings Lets you re-run the Initial Settings procedure. See page 21 for details. 04 Settings You can connect a wireless USB keyboard or mouse to the USB port on the front of the product. Keyboard Settings: Lets you configure a wireless USB keyboard connected to the product. | NOTE | You can use the keyboard only when a QWERTY keyboard screen or window appears in the Web Browser. Mouse Settings: Lets you configure a wireless USB mouse connected to the product.
Settings The default PIN is 0000. Enter the default PIN to access the security function if you haven't created your own password. Security BD Parental Rating: Prevents playback of Blu-ray Discs with a rating equal to or above a specific age rating you enter unless the PIN is entered. DVD Parental Rating: Prevents playback of DVDs with a rating above a specific numerical rating you select unless the PIN is entered. Change PIN: Change the 4-digit PIN used to access security functions.
Networks and the Internet Wired - Manual If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. 04 After following Steps 1 to 3 above: Settings When you connect this product to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the product's software through the network connection.
Settings 2 . In the pop-up menu, click Status. Network Settings 3 . On the dialog that appears, click the Support tab. Select your wireless router from the list. Refresh ELT 5 . The Network settings are displayed. Previous KT_WLAN_C361 Mirhenge_edu 4 . On the Support tab, click the Details button. The Network settings are displayed. | NOTE | Depending on your Windows version, the information may differ.
6 . When done, select Next at the right of the screen, and then press the E button. 7 . The Network Status screen appears. The product attempts to verify the network connection and fails. 8 . Select IP Settings on the right of the screen, and press the E button. The IP Settings screen appears. 9 . Select the IP Mode field, and then set it to Manual. 10 . Use the number keypad on your remote to enter the Network values. Use the ▲▼◄► buttons on the remote to move from entry field to entry field.
Settings Through the Wi-Fi Device Soft AP 1 . On the Wi-Fi device, follow the procedure on the device for connecting to another Wi-Fi Direct device. See the device's user manual for instructions. Soft AP lets you connect other Wi-Fi devices to your network through the product and lets them access the Internet. It requires that you create a security key which you must enter into the other Wi-Fi devices when you are connecting them to the network. 2 .
3 . Select AllShare Settings, and then press the E button. The AllShare Settings screen only displays devices if you have established networked connections to AllShare devices. For more information about AllShare networked devices, see pages 35~36. Upgrading Software The Software Update menu allows you to upgrade the product’s software for performance improvements or additional services. • Never turn the product off or back on manually during the update process. 1 .
Settings 11 . In the product’s menu, go to Settings > Support > Software Update. 12 . Select By USB. | NOTE | There should be no disc in the product when you upgrade the software using the USB Host jack. When the Software Update is done, check the software details in the Software Update menu. Do not turn off the product during the Software Update. It may cause the product to malfunction.
Media Play Playing Video, Photo, or Music Content To access the AllShare Play screen, select the AllShare Play icon on the Main screen, and then press the E button. 1 . Make sure that the source of the content you want to play or view is connected to or inserted into the product. Using the AllShare Play Screen 2 . Use the ▲▼ buttons to select Videos, Photos, or Music, and then press the E button. The first source selection on the right side is highlighted. AllShare Play / My list / 3 .
Media Play Playing Files on a USB Storage Device or iPod/iPhone You can play multimedia files located on a connected USB device. 1 . With the product turned off, connect a USB storage device or an iPod/iPhone. 2 . Turn on the product. When the Main screen appears, select AllShare Play > Videos, Photos or Music > Connected Device, and then press the E button. 3 . The kind of content you selected on the connected device is displayed.
Playing Commercial Audio Discs The Function Screen You can also change sources by pressing the Function button in the upper right of the remote. AllShare Play / Music / To access the Function Screen, select the Function icon on the Main screen, and then press the E button. Options on the Function Screen To select, highlight an option using the ▲▼ buttons, and then press the E button.
Media Play Playing a Disc with User Recorded Content You can play multimedia files you have recorded on DVD or CD discs. 1 . Place a user recorded disc into the disc tray with the disc’s label facing up, and then close the tray. The Device Connected pop-up appears. For more information about playing photo contents, go to Playing Photo Contents and Using the Tools Menu when a File is Highlighted on pages 45~47.
Playing Content Located on Your PC or DLNA Device through the Product Product PC Product 5V 500mA Play back PC's files 5V 500mA Play back PC's files AllShare Connection 1 . Connect the product, your PC, and/or your DLNA compatible cell phone to the same wireless network. 2 . Follow the directions in the AllShare software Installation/Instruction manual to set up devices and files for playing or viewing. 3 . Select AllShare Play in the product's Home screen, and then press the E button.
Media Play Controlling Video Playback You can control the playback of video files located on Blu-ray, DVD, and CD discs, and on USB storage devices. Depending on the disc, some of the functions described in this manual may not be available. Buttons on the Remote Control used for Video Playback DISC MENU TITLE MENU 0 POPUP Using the disc menu, title menu, popup menu and title list DISC MENU During playback, press this button to display the Disc menu.
Menu that appears only when BD/DVD disc During playback, press the TOOLS button. plays Repeat Mode Select to repeat a specific Title, Chapter (BD/DVD discs only) or marked section. Works the same as the REPEAT button. See page 40. Full Screen Select to set the desired full screen size. You can select Original, Mode1 (larger), and Mode2 (largest). Picture Mode Select to set the picture mode. - Dynamic : Choose this setting to increase sharpness.
Media Play Shuffling Tracks on an Audio CD Controlling Music Playback You can control the playback of music content located on a DVD, CD, or a USB storage device. You can set the product to play tracks on an audio CD (CD-DA/MP3) at random. Buttons on the Remote Control used for Music Playback 1 . During playback, use the ► button to select in the lower right corner of the screen, and then press the E button.
On the Play selection screen, you can also choose Select All, Deselect All, and Cancel. • Cancel cancells any changes you made on the Play Select screen. When you return to the Playback screen, the Playlist will be unchanged. Ripping You can rip music from a music CD to a USB device inserted in the USB jack. 1 . Insert a USB device into the USB jack on the front of the product, and then press the RETURN (') button on your remote. 2 .
Media Play To connect the Home Cinema to a Bluetooth device 5V 500mA Connect Bluetooth device Check if the Bluetooth device supports the Bluetoothcompliant stereo headset function. 1 . Press the FUNCTION button on the remote control of product to display the BT message. • You will see WAIT for 2 seconds and then READY on the front display of the Home Cinema. 2 . Select the Bluetooth menu on Bluetooth device you want to connect. (refer to Bluetooth device's user manual) 3 .
Zoom Select to enlarge the current picture. (Enlarge up to 4 times) Rotate Select to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.) Information Shows the picture information. 05 Playing Photo Contents You can play photo contents located on a DVD, USB, mobile device or PC. | NOTE | Using the Tools Menu Depending on the disc or storage device, the Tools menu may differ. All options may not be displayed. During playback, press the TOOLS button.
Media Play Album Appears on the View function screen. Select Album to sort and then display all music tracks on a storage device by album. Genre Appears on the View function screen. Select Genre to sort and then display all music tracks on a storage device by genre. Latest Date Appears on the View function screen. Select to sort and then display all photo or video files on a storage device from the latest to earliest date. Earliest Date Appears on the View function screen.
Login / Out The Log In/Out function lets you log in to your online Samsung account. 1. Select Add to Playlist, and then press the E button. 2. Use the ▲▼◄► buttons to highlight a track or file, and then press the E button. Edit playlist 3. Repeat for each track or file you want to add. | NOTE | 4. Select Add on the right, and then press the E button. Add to Playlist 5.
Media Play Listening to Radio Using Buttons on the Remote Control 1 . Press the FUNCTION button to select FM. 2 . Tune in to the desired station. • Preset Tuning 1 : Press the 5 button to select PRESET and then press the TUNING/CH (,.) button to select the preset station. - Before you can tune to preset stations, you must add preset stations to the product's memory. • Manual Tuning : Press the 5 button to select MANUAL and then press the TUNING/CH (,.) button to tune in to a lower or higher frequency.
To search for a program using the PTY You can see the RDS signals the station sends on the display. Press the RDS DISPLAY button while listening to an FM station. • Each time you press the button, the display change to show you the following information : PS NAME RT CT Frequency codes While searching, appears and then the station names will be displayed. appears if no signal is sent.
Media Play Using the Special Effects Remote Control Buttons SOUND SOUND EFFECT Function EFFECT Lets you select a mode that optimizes the sound. 1. Press the SOUND EFFECT button. 2. Press the ▲▼ button to select the desired mode: DSP or Sound Mode. 3. Press the ◄► buttons to select the desired sound effect. DSP MP3 Enhancer Power Bass Off Playing a 2D video in 3D mode You can enjoy an ordinary 2D video in 3D mode.
Network Services Smart Hub at a Glance 1 34 Network Services To use network services, you must first: 2 07 You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the product to your network. Search 1 . Connect the product to the network. (See page 20) 2 . Configure the network settings.
Network Services 9 My Applications : Displays your personal gallery of applications which you can add to, modify, and delete. 0 Samsung Apps : Open Samsung Apps to download various for pay or free-of-charge application services. Web Browser at a Glance 1 http://www.google.com/ Using the Web Browser You can access the internet using the Web Browser application which is installed in the Smart Hub screen by default. Google Search b Control Panel Link Browsing / Tools ' Exit 1 .
07 2 Navigation Help : Displays the remote control buttons you can use to navigate in Web Browser. • GREEN (B) : To display the Control Panel. • YELLOW (C) : To search a link. • Tools : To display Tools window. • Exit : To return to the previous menu. Network Services BD-LIVE™ Once the product is connected to your network, you can enjoy various movie-related service contents available on BD-LIVE compliant discs. 1 .
Appendix Additional Information Note HDMI OUT Connections • Certain HDMI output resolutions may not work, depending on your TV. • You must have an HDMI connection to enjoy videos with 3D technology. • A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu. 3D Settings • For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie stops and the 3D mode option is de-activated.
BD-LIVE Internet Connection 07 • The Internet connection may be restricted while you are using BD-LIVE contents. Anynet+ (HDMI-CEC) Appendix • Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV. • This function is not available if the HDMI cable does not support CEC. • If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
Appendix Playing a Video files • Video files with high bit rates of 20Mbps or more strain the product’s capabilities and may stop playing during playback. Selecting the Audio Language • The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings. • The languages available through the Audio Language function depend on the languages that are encoded on the disc. This function or certain languages may not be available.
Watching a Movie 07 Appendix AllShare Play • You must have the VIDEO output (Composite) connected to your TV to view iPod video (See page 18). • If you want to play iPod video via VIDEO output, set Anynet+ (HDMI-CEC) to off. • Only the playback screen will appear on the TV. View other iPod screens on the iPod player. • If you want to return to the iPod menus while the iPod player is connected using the dock, press FUNCTION on the remote control or press on the front panel of the system and select R. IPOD.
Appendix Resolution according to the output mode Blu-ray Disc/E-contents/Digital Contents playback HDMI/connected Output Setup HDMI/not connected HDMI Mode Blu-ray Disc E-contents/ Digital contents VIDEO Mode VIDEO Mode BD Wise Resolution of Bluray Disc 1080p@60F 576i/480i - Auto Max. Resolution of TV input Max.
Digital Output Selection PCM Audio Stream on Blu-ray Disc Audio Stream on DVD Definition for Blu-ray Disc Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) HDMI supported AV receiver PCM Up to PCM 7.1ch PCM DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Up to PCM 7.1ch Dolby Digital DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Plus Up to PCM 7.1ch Dolby Digital Plus DTS re-encoded Re-encoded Dolby Digital * Dolby TrueHD Up to PCM 7.
Appendix Troubleshooting Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord and contact the nearest authorized dealer or Samsung Electronics Service Centre. Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. The iPod fails to connect.
Symptom • Press and hold the remote control's 5 button for 5 seconds in STANDBY mode. - Using the RESET function will erase all stored settings. Do not use this unless necessary. 07 Appendix • The product is not working. (Example: The power goes out or a strange noise is heard.) Check/Remedy • The Product is not working normally. You have forgotten the rating level password. • With no disc in the product, press and hold the product's 5 button for longer than 5 seconds.
Appendix Symptom Check/Remedy Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded. • The wireless connection between the server and the product is unstable. Check the connection. The AllShare Play connection between the TV and PC is unstable. • IP address under the same subnetwork should be unique, otherwise IP collision can results in such a phenomenon. • Check if you have a firewall enabled.
Specifications DVD (Digital Versatile Disc) Disc CD : 12cm (COMPACT DISC) CD : 8cm (COMPACT DISC) Video Output Composite Video Video/Audio HDMI Front speaker output Subwoofer speaker output Amplifier Frequency response S/N Ratio Channel separation Input sensitivity Speaker system Speaker • • • • • Impedance Frequency range Front 3Ω 140Hz~20kHz Subwoofer 3Ω 40Hz ~ 160Hz Output sound pressure level 87dB/W/M 88dB/W/M Rated input Maximum input Dimensions (W x H x D) Weights 165W 330W 90 x 207.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Area ` Europe Albania Austria Contact Centre 42 27 5755 0810 - SAMSUNG (7267864, € 0.07/min) 02-201-24-18 Bosnia Bulgaria Croatia 05 133 1999 07001 33 11 062 SAMSUNG (062 726 7864) 800-SAMSUNG (800-726786) Samsung Zrt.
