HT-E6730W 7.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-E6730W_ZC_0314.
Safety Information Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within the triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE.
Precautions 1 . Read these instructions. Safety Information Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 14 . Refer all servicing to qualified service personnel.
Safety Information • Do not plug multiple electric devices into the same wall socket. Ovedrloading a socket can cause it to overheat, resulting in a fire. • Maintenance of the Cabinet - Before connecting other components to this product, be sure to turn them off. - If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback.
License 01 • Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTSHD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Contents SAFETY INFORMATION 2 3 3 3 4 4 5 Warning Precautions Disc Storage & Management Handling Cautions Using the 3D Function Copyright License 7 8 11 12 12 13 Disk and Format Compatibility Logos of Discs the product can play Accessories Front Panel Rear Panel Remote Control 15 Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit Connecting the Speakers Speaker Components Installing the Front Speakers on the Tall Boy Stands Connecting The Speakers Connecting the FM Antenna Connectin
Getting Started Disk and Format Compatibility 02 Disc types and contents your product can play Disc Type Blu-ray Disc 3D Blu-ray Disc VIDEO DVD-VIDEO, DVD-RW, DVD-R, DVD+RW, DVD+R Getting Started Media Details BD-ROM or BD-RE/-R disc recorded in the BD-RE format. DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized, or a USB storage media containing MKV, MP4 contents.
Getting Started Region Code Logos of Discs the product can play Both products and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this product is displayed on the rear panel of the product. Disc Type Blu-ray Disc DVD-VIDEO Region Code Area A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
Video File Support *.avi AVI *.mkv Video Codec Resolution Frame rate (fps) Bitrate (Mbps) H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 Window Media Video v9 1920x1080 6 ~ 30 25 WMA H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 MP3 AAC H.
Getting Started - The Seek (skip) function is not available if the file’s index table is damaged. - When you playback a file remotely through a network connection, video playback may stutter depending on the network speed. Video decoder - Supports up to H.264 Level 4.1 - Does not support H.
| NOTE | Some AVCHD format discs may not play, depending on the recording conditions. 02 AVCHD format discs need to be finalized. Getting Started “x.v.Color” offers a wider color range than normal DVD camcorder discs. Some MKV and MP4 format discs may not play, depending on their video resolution and frame rate. Accessories Check for the supplied accessories below.
Getting Started Front Panel VACUUM TUBE AMP VOLUME CONTROL OPEN/CLOSE ENTER PLAY/PAUSE DISC TRAY STOP FUNCTION POWER ASC IN 5V 500mA DISPLAY ASC IN REMOTE CONTROL SENSOR USB HOST | NOTE | If Cellular phone or mobile device is near vacuum tube amp, or put other electronic products on the top of the product would cause noise from the audio. Please be careful that children do not touch the product's surface When the set is on working. It would be hot.
Remote Control 02 Tour of the Remote Control FUNCTION TV SOURCE To change to TV mode, press the TV button. RECEIVER To change to Home Theater, press the BD button. Press numeric buttons to operate options. SLEEP BD To open and close the disc tray. 1 2 3 4 5 6 7 8 9 TITLE MENU 0 Press to view the disc menu. POPUP Press to stop/play a disc. Press to pause a disc. Cut off the sound temporarily. MUTE VOL S/W LEVEL TUNING / CH Press to use Netflix.
Getting Started Installing batteries in the Remote Control Battery size: AAA 1 2 | NOTE | Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. Assuming typical TV usage, the batteries last for about one year. The remote control can be used up to approximately 23 feet (7 meters) from the product in a straight line. Setting up the Remote Control You can control certain functions of your TV with this remote control.
Connections This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connections Speaker Components SWA-5000 SCREW (5X15): 2EA SCREW (5X20): 6EA STAND BASE SPEAKER CABLE STAND (L) (R) Wireless Receiver Module CENTER (L) (R) Speaker Cable (2EA) FRONT/FRONT TOP SURROUND TX Card SUBWOOFER Installing the Front Speakers on the Tall Boy Stands To assemble one speaker, follow these steps: 1. Turn the Stand Base upside down, and then connect it to the bottom of the Stand. 2.
Connecting The Speakers 03 1. Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle to the colored sticker on the bottom of each speaker. 2. To attach speaker wire to each speaker: 3. 4. Black b. Press down the black tab on the back of the speaker, insert the black wire, and then release the tab. Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of the speaker plugs to the colors of the speaker jacks.
Connections | CAUTION | If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided by the company. Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
Connecting to an iPod/iPhone 03 Using a USB Cable Connections Connect an iPod/iPhone using the USB cable to the front USB port. ASC IN 5V 500mA 5V 500mA Using a Dock To view a video from your iPod on your TV, you must also connect the VIDEO OUT jack on the product to the VIDEO IN jack on your TV. See page 20.
Connections Connecting to a TV Select either Method 1 or Method 2. • If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control, and then select the source the product is connected to (HDMI, Video In, etc.) to view video from the home theater.
Connecting to External Devices W Red AUX IN White Connections R 03 To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD D. IN AUX R.
Connections Connecting to a Network Router Wireless Network You can connect your product to your network router using one of the methods illustrated below.
Settings The Initial Settings Procedure If you skip wireless network setup here, go to "Wireless Network" on page 33 to set up the product's wireless network connection later. Settings 1 . Turn on your TV after connecting the product, and then turn on the product. When you turn on the product for the first time, the product automatically displays the Initial Settings Language screen. The product starts the wireless network connection procedure by default.
Settings Initial Settings > Network Settings (4/5) Enter security key. 0 entered - WPS PIN a b c d e f 1 2 3 Previous g h i j k l 4 5 6 Next m n o p q r 7 8 9 s t u v w x y z 0 A/a Space Skip 8 . Enter your network's security key. When done, use the ▲▼◄► buttons to select Next, and then press the E button. | NOTE | Enter numbers by pressing the number buttons on your remote.
The Home Screen Initial Settings > Auto Sound Calibration 04 AllShare Play Previous Place Calibration Mic. Here User Play videos, photos, or music from Disc or connected devices. Next Skip 2 3 Settings Connect the calibration microphone to the ASC IN jack and set up all speakers correctly as shown before starting. Note: Please be aware that this process outputs a loud test sound that is needed for proper calibration. Press Next to set the best speaker output level. Press Skip to configure later.
Settings Accessing the Settings Screen 1 . Select Settings on the Home screen, and then press E. The Settings screen appears. 3 E (Enter) / DIRECTION Button : ~ Press ▲▼◄► to move the cursor or select an item. ~ Press the E button to activate the currently selected item or confirm a setting. 4 EXIT Button : Press to exit the current menu.
Settings Menu Functions TV Aspect Ratio Lets you adjust the output of the product to the screen size of your TV. See page 24, Step 12 for a description of the screen size options. Smart Hub Screen Size Lets you select the optimal size for the Smart Hub Screen. BD Wise BD Wise is Samsung’s latest inter-connectivity feature.
Settings Speaker Settings Audio Auto Sound Calibration Equalizer You can set the speaker options. The product automatically creates a sound field optimized for your environment. See page 32. Lets you configure the Equalizer settings manually. Smart Volume Lets you set the product so that the volume remains stable when a scene change occurs or when you change the channel. Speaker Selection Lets you select which speakers you want active, either the TV's speakers or the Home theater's speakers.
Network Network Status Lets you check whether a connection to the network and the Internet have been established. Wi-Fi Direct Lets you connect a Wi-Fi Direct device to the product using a Peer-to-Peer network, without a wireless router. You can use the device to control the product. Soft AP Lets you connect other types of Wi-Fi devices to the product wirelessly. Requires that you create a security key which you must enter into the other Wi-Fi devices when you are connecting them to the network.
Settings System Initial Settings Lets you re-run the Initial Settings procedure. See page 23 for details. You can connect a wireless USB keyboard or mouse to the USB port on the front of the product. Keyboard Settings: Lets you configure a wireless USB keyboard connected to the product. | NOTE | You can use the keyboard only when a QWERTY keyboard screen or window appears in the Web Browser. Mouse Settings: Lets you configure a wireless USB mouse connected to the product.
The default PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN. 04 Settings Security BD Parental Rating: Prevents playback of Blu-ray Discs with a rating equal to or above a specific age rating you enter unless the PIN is entered. DVD Parental Rating: Prevents playback of DVDs with a rating above a specific numerical rating you select unless the PIN is entered. Change PIN: Change the 4-digit PIN used to access security functions.
Settings Auto Sound Calibration By setting the Auto Sound Calibration (ASC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1-channel sound field optimized for your environment.
< Getting the Network Settings Values > Wired - Manual If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. You can view your Network Settings values on most Windows computers. To view the Network Settings values, follow these steps: 04 After following Steps 1 to 3 above: • In Windows XP 1 . Select Start in the Network Settings screen, and then press the E button. The Network Status screen appears.
Settings Wireless (General) - Automatic After following Steps 1 to 3 in "Configuring Your Network Connection" on page 32: 1 . Select Start in the Network Settings screen, and then press the E button. The product searches for and then displays a list of the available networks. Network Settings Select your wireless router from the list: 1/10 iptime23 Refresh ELT WPS(PBC) JSY Previous KT_WLAN_C361 Mirhenge_edu Next Cancel SO070VOIP 2 . Select the desired network, and then press the E button. 3 .
You can get these values from your Internet provider. You can also view these values on most Windows computers. For instructions, see "Getting the Network Settings Values." on page 33. 13 . When done, highlight OK, and then press E button. The Network Status screen appears. The product verifies the network connection and then connects to the network. When it is done, highlight OK, and then press E button.
Settings Through the Product Using PBC 1 . Select the Wi-Fi Direct device you want to connect to this product, and then press the E button. The PBC/PIN pop up appears. 4 . Select On or Off, and then press the E button. < To Set the Soft AP Security Key > 2 . Select PBC, and then press the E button. The PBC pop-up appears. 1 . On the Soft AP screen, select Security Key, and then press the E button. The Security Key screen appears. 3 . Press the PBC button on the Wi-Fi Direct device within 2 minutes. 4 .
Upgrading Software 1 . In the Home menu, select Settings, and then press the E button. 6 . If you select Don’t update, the product cancels the upgrade. 2 . Select Support, and then press the E button. By USB 3 . Select Software Update, and then press the E button. 1 . Visit www.samsung.com. 4 . Select one of the following methods: • Online 3 . Enter the product's model number into the search field, and then click Find Product. • By USB • By Disc 2 . Click SUPPORT on the top right of the page. 4 .
Settings By Disc 4 . When the update is complete, the product turns off automatically, and then turns on. 1 . Visit www.samsung.com. | NOTE | 2 . Click SUPPORT on the top right of the page. When the system upgrade is done, check the software details in the Software Update menu. 3 . Enter the product's model number into the search field, and then click Find Product. 4 . Click Get downloads in the center of the page below the Downloads header. Do not turn off the product during the Software Update.
Media Play Playing Video, Photo, or Music Content To access the AllShare Play screen, select the AllShare Play icon on the Main screen, and then press the E button. 1 . Make sure that the source of the content you want to play or view is connected to or inserted into the product. Using the AllShare Play Screen 2 . Use the ▲▼ buttons to select Videos, Photos, or Music, and then press the E button. The first source selection on the right side is highlighted. AllShare Play / My List / 3 .
Media Play Playing Files on a USB Storage Device or iPod/iPhone You can play multimedia files located on a connected USB device. 1 . With the product turned off, connect a USB storage device or an iPod/iPhone. 2 . Turn on the product. When the Main screen appears, select AllShare Play > Videos, Photos or Music > Connected Device, and then press the E button. 3 . The kind of content you selected on the connected device is displayed.
The Function Screen You can also change sources by pressing the Function button in the upper right of the remote. AllShare Play / Music / To access the Function Screen, select the Function icon on the Main screen, and then press the E button. Options on the Function Screen To select, highlight an option using the ▲▼ buttons, and then press the E button.
Media Play Playing a Disc with User Recorded Content You can play multimedia files you have recorded on DVD or CD discs. 1 . Place a user recorded disc into the disc tray with the disc’s label facing up, and then close the tray. The Device Connected pop-up appears. For more information about playing photo contents, go to Playing Photo Contents and Using the Tools Menu when a File is Highlighted on pages 47~50.
Playing Content Located on Your PC or DLNA Device through the Product Product PC Product Play back PC's files Play back PC's files AllShare Connection 1 . Connect the product, your PC, and/or your DLNA compatible cell phone to the same wireless network. 2 . Follow the directions in the AllShare software Installation/Instruction manual to set up devices and files for playing or viewing. 3 . Select AllShare Play in the product's Home screen, and then press the E button. The AllShare Play screen appears.
Media Play Controlling Video Playback You can control the playback of video files located on Blu-ray, DVD, and CD discs, and on USB storage devices. Depending on the disc, some of the functions described in this manual may not be available. Buttons on the Remote Control used for Video Playback DISC MENU TITLE MENU 0 POPUP Using the disc menu, title menu, popup menu and title list DISC MENU During playback, press this button to display the Disc menu.
Menu that appears only when a BD/DVD During playback, press the TOOLS button. disc is playing Repeat Mode Select to repeat a specific Title, Chapter (BD/DVD discs only) or marked section. Works the same as the REPEAT button. See page 44. Full Screen Select to set the desired full screen size. You can select Original, Mode1 (larger), and Mode2 (largest). Picture Mode Select to set the picture mode. - Dynamic : Choose this setting to increase sharpness.
Media Play Shuffling Tracks on an Audio CD Controlling Music Playback You can control the playback of music content located on a DVD, CD, or a USB storage device. You can set the product to play tracks on an audio CD (CD-DA/MP3) at random. Buttons on the Remote Control used for Music Playback 1 . During playback, use the ► button to select in the lower right corner of the screen, and then press the E button.
• Use Deselect All to deselect all selected tracks at once. Then, select individual tracks or use Select All to select all the tracks, and then press the RETURN (') button on your remote or select PLAY and then press the E button. If you do not use Select All or select individual tracks, the Playlist will not change. You can control the playback of photo contents located on a DVD, CD, or a USB storage device. When Ripping is done, a folder called MP is created in the USB.
Media Play | NOTE | Depending on the disc or storage device, the Tools menu may differ. All options may not be displayed. Earliest Date To enable the background music function, the photo file must be in the same storage media as the music file. However, the sound quality can be affected by the bitrate of the MP3 file, the size of the photo, and the encoding method. Appears on the View function screen.
Send 2. Repeat for each track or file you want to upload. | NOTE | You can also move to Select All on the right, and then press the E button to select all tracks or files. Depending on the screen you are viewing, select Delete to erase a file Delete (Playlist) from erasable media (such as a USB device) or to delete a playlist. Select Edit Playlist to remove files or tracks from an existing playlist. The storage device containing the playlist must be inserted into or attached to the product. 3.
Media Play Encoding Information Encoding - which changes by language or by geographical area - modifies how the product sorts, arranges, and presents files or tracks, displays dates, etc. Select Encoding to change the encoding to match your language or geographical area. Displays media file and content information. | NOTE | Depending on the disc or storage device, the Tools menu may differ. All options may not be displayed. Presetting Stations Example : Presetting FM 89.10 into memory. 1 .
Dolby Pro Logic II • Music : When listening to music, you can experience sound effects as if you are listening to the actual performance. • Game : Enhances the excitement of the game’s sound. • Matrix : Select to hear multi channel surround sound. • Prologic : Select to listen to a 2CH sound source in 5.1CH surround sound with all speakers active. - A specific speaker(s) may not output depending on the input signal. • Off : Select this for normal listening.
Network Services You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the product to your network. Smart Hub at a Glance 1 To use network services, you must first: 2 34 Search 1 . Connect the product to the network. (See page 22) 2 . Configure the network settings.
0 Samsung Apps : Open Samsung Apps to download various for pay or free-of-charge application services. Web Browser at a Glance 1 Network Services My Applications : Displays your personal gallery of applications which you can add to, modify, and delete. 06 9 http://www.google.com/ Using the Web Browser You can access the internet using the Web Browser application which is installed in the Smart Hub screen by default. Google Search b Control Panel Link Browsing / Tools ' Exit 1 .
Network Services 2 Navigation Help : Displays the remote control buttons you can use to navigate in Web Browser. • GREEN (B) : To display the Control Panel. • YELLOW (C) : To search a link. • Tools : To display Tools window. • Exit : To return to the previous menu. BD-LIVE™ Once the product is connected to your network, you can enjoy various movie-related service contents available on BD-LIVE compliant discs. 1 .
Appendix Additional Information 07 Note Connections • Certain HDMI output resolutions may not work, depending on your TV. • You must have an HDMI connection to enjoy videos with 3D technology. • A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu. Appendix HDMI OUT 3D Settings • For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie stops and the 3D mode option is de-activated.
Appendix Anynet+ (HDMI-CEC) • Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV. • This function is not available if the HDMI cable does not support CEC. • If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function. BD Data Management • In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback. • Only those USB devices formatted in the FAT file system (DOS 8.
Playing Video files • The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings. • The languages available through the Audio Language function depend on the languages that are encoded on the disc. This function or certain languages may not be available. • Some Blu-ray Discs may allow you to select either the PCM or Dolby digital audio soundtrack in English.
Appendix Playing Music • Adjust the volume to a moderate level before you connect your iPod to the product. • When the product is on and you connect an iPod, the product will charge the iPod's battery. Watching a Movie AllShare Play • You must have the VIDEO output (Composite) connected to your TV to view iPod video (See page 20). • If you want to play iPod video via VIDEO output, set Anynet+ (HDMI-CEC) to off. • Only the playback screen will appear on the TV. View other iPod screens on the iPod player.
Resolution according to the output mode Blu-ray Disc/E-contents/Digital Contents playback 07 Setup HDMI/not connected HDMI Mode Blu-ray Disc E-contents/ Digital contents VIDEO Mode VIDEO Mode BD Wise Resolution of Bluray Disc 1080p@60F 480i - Auto Max. Resolution of TV input Max.
Appendix Digital Output Selection Setup PCM Connection Definition for Blu-ray Disc Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) HDMI supported AV receiver PCM Up to PCM 7.1ch PCM DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Up to PCM 7.1ch Dolby Digital DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Plus Up to PCM 7.1ch Dolby Digital Plus DTS re-encoded Re-encoded Dolby Digital * Up to PCM 7.
Troubleshooting Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. The iPod fails to connect. • Check the condition of the iPod connector and Dock. • Keep the iPod software version up to date. Playback does not start. • Check the region number of the Blu-ray/DVD disc. Blu-ray/DVD disc purchased from abroad may not be playable. • CD-ROMs and DVD-ROMs cannot be played on this product.
Appendix Symptom The menu screen does not appear even when the menu function is selected. The aspect ratio cannot be changed. • The product is not working. (Example: The power goes out or a strange noise is heard.) Check/Remedy • Are you using a disc that does not contain menus? • You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function.
Symptom Check/Remedy 07 AllShare Play function • AllShare Play shows only files corresponding to the Photo, Music, and Movie categories. Files that do not correspond to these categories may not be displayed. Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded. • The wireless connection between the server and the product is unstable. Check the connection.
Appendix Specifications Weight General FM Tuner 16.93 (W) x 2.56 (H) x 13.91 (D) inches Operating Temperature Range +41°F to +95°F Operating Humidity Range 10 % to 75 % Signal/noise ratio 55 dB Usable sensitivity 12 dB Total harmonic distortion 0.5 % BD (Blu-ray Disc) Reading Speed : 9.834 m/sec DVD (Digital Versatile Disc) Disc CD : 5 inches (COMPACT DISC) CD : 3 1/2 inches (COMPACT DISC) Video Output Video/Audio Amplifier 8.6 Ibs Dimensions Composite Video HDMI Reading Speed : 6.
7.1ch speaker system Speaker system Front Top Surround Center Subwoofer Impedance 3Ω 3Ω 3Ω 3Ω 3Ω Frequency range 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 40Hz ~ 160Hz Output sound pressure level 87dB/W/M 87dB/W/M 87dB/W/M 87dB/W/M 88dB/W/M Rated input 165W 165W 165W 170W 170W Maximum input 330W 330W 330W 340W 340W Dimensions (W x H x D) Front/Front Top : 3.74 x 47.71 x 2.76 (Stand base: 9.44 x 9.44) inches Surround : 3.54 x 5.57 x 2.69 inches Center : 14.17 x 2.93 x 2.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area Contact Center Web Site ` North America Canada 1-800-SAMSUNG (726-7864) www.samsung.com Mexico 01-800-SAMSUNG (726-7864) www.samsung.com U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com HT-E6730W_ZC_0314.
HT-E6730W Technoloisir Blu-ray™ 7,1 canaux Guide d’utilisation imaginez les possibilités Merci d'avoir acheté ce produit Samsung. Pour obtenir notre service complet, veuillez enregistrer votre produit sur www.samsung.com/register HT-E6730W_ZC_FRC_0314.
Information relative à la sécurité Avertissement POUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE RETIREZ JAMAIS LE CAPOT (NI L’ARRIÈRE). LES PIÈCES DE CE PRODUIT NE SONT PAS RÉPARABLES PAR L’UTILISATEUR. VEUILLEZ CONTACTER UN TECHNICIEN QUALIFIÉ POUR TOUTE RÉPARATION. ATTENTION RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR. L’éclair et la flèche inclus dans le triangle représentent un avertissement à l’égard de tensions dangereuses se trouvant à l’intérieur du produit.
Précautions Lisez ces instructions. Conservez ces instructions. Tenez compte de tous les avertissements. Suivez toutes les instructions. N’utilisez jamais cet appareil à proximité de l’eau. Nettoyez l'appareil uniquement avec un linge sec. 7 · N'obstruez aucun orifice de ventilation. Installez l'appareil en respectant les consignes du fabricant.
Information relative à la sécurité • Ne branchez pas plusieurs appareils électriques dans la même prise murale. La surcharge d’une prise peut causer une surchauffe qui pourrait entraîner un feu. • Entretien du meuble - Avant de connecter d'autre composants à ce produit, veillez à les éteindre. - Si vous déplacez sans transition votre produit d’un endroit froid vers un endroit chaud, de la condensation pourrait se former sur les pièces mobiles et sur les lentilles et provoquer une lecture anormale.
Licence 01 • Fabriqué sous licence et sous les numéros de brevets américains suivants : 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872, U.S. et d'autres brevets américains ou étrangers, émis ou en instance. DTS-HD, le symbole, et DTSHD avec le symbole sont des marques de commerce déposées de DTS-HD Master Audio | Essential est une marque de commerce de DTS, Inc. Le produit comprend le logiciel. © DTS, Inc. Tous droits réservés.
Table des matières INFORMATION RELATIVE À LA SÉCURITÉ 2 3 3 3 4 4 5 Avertissement Précautions Rangement et gestion des disques Précautions de manipulation Utilisation de la fonction 3D Droits d’auteur Licence DÉFINITION DES PARAMÈTRES 23 25 26 27 32 32 37 DIFFUSEUR DE MÉDIAS POUR DÉMARRER 7 8 11 12 12 13 Compatibilité du disque et du format Logos des disques que le produit peut lire Accessoires Face avant Face arrière Télécommande CONNEXIONS 15 15 16 16 17 18 19 19 19 20 20 20 21 21 21 21 22 22 22
Pour démarrer Compatibilité du disque et du format VIDÉO Type de disque Disque Blu-ray Disque Blu-ray 3D Détails Le disque BD-ROM ou BD-RE/-R est enregistré dans le format BD-RE. DVD-VIDÉO, DVD-RW, DVD-R, DVD-VIDÉO, disques DVD+RW/DVD-RW(V)/DVD-R/+R qui ont été enregistrés DVD+RW, DVD+R et finalisés ou périphérique USB comprenant du contenu MKV ou MP4.
Pour démarrer Code de région Le produit et les disques sont codés par région. Ces codes de région doivent correspondre pour que le disque puisse être lu. Si les codes ne correspondent pas, le disque ne sera pas lu. Le numéro de région attribué à ce produit figure sur la face arrière du produit. Type de disque Code de région A Disque Blu-ray Logos des disques que le produit peut lire Disque Blu-ray Disques Blu-ray 3D BD-LIVE Dolby DTS Système de diffusion NTSC aux É.-U.
Fichiers vidéo pris en charge *.avi AVI *.mkv *.asf *.mp4 MP4 *.mpg *.mpeg *.ts *.tp *.trp Fréquence d’image (ips) Débit binaire (Mbit/s) H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 Window Media Video v9 1920x1080 6 ~ 30 25 WMA H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 MP3 AAC H.
Pour démarrer - La fonction de recherche (saut) n’est pas disponible si la table d’index du fichier est endommagée. - Lorsque la lecture d’un fichier s’effectue à distance par une connexion réseau, selon la vitesse du réseau, la lecture de la vidéo peut être saccadée. Décodeur vidéo - Prend en charge jusqu’à la norme H.264 Niveau 4.1 - Ne prend pas en charge les normes H.264 FMO/ASO/RS, VC1 SP/MP/AP L4 et AVCHD - MPEG4 SP, ASP : Au-dessous de 1280 x 720 : 60 images max.
| REMARQUE | Il se pourrait que certains disques de format AVCHD ne puissent pas être lus en raison des conditions d'enregistrement. 02 Les disques de format AVCHD doivent être finalisés. Il se pourrait que certains disques de format MKV et MP4 ne puissent pas être lus en raison de leur résolution vidéo et de leur fréquence d’image. Accessoires Pour démarrer Le format « x.v.Color » offre une plus vaste palette de couleurs que les DVD normaux de caméscope.
Pour démarrer Face avant COMMANDES DU VOLUME OUVRIR/FERMER AMP. TUBE À VIDE ENTRER LECTURE/PAUSE TIROIR DISQUE ARRÊT MARCHE/ ARRÊT FONCTION ASC IN 5V 500mA AFFICHAGE DÉTECTEUR DE TÉLÉCOMMANDE ENTRÉE ASC HÔTE USB | REMARQUE | Si le téléphone mobile ou l'appareil mobile se trouve à proximité d'un amplificateur à tube vidéo ou si d'autres appareils électroniques sont placés au-dessus du produit, il pourra en résulter du bruit sur la sortie audio.
Télécommande 02 Aperçu de la télécommande FUNCTION TV SOURCE Pour passer au mode téléviseur, appuyez sur la touche TV. RECEIVER Pour passer au mode Cinéma maison, appuyez sur la touche BD. Appuyez sur les touches numériques pour exécuter les options. SLEEP BD Pour ouvrir et fermer le tiroir disque. 1 2 3 4 5 6 7 8 9 TITLE MENU 0 Pour accéder au menu Disque. POPUP Pour couper le son provisoirement. Pour interrompre la lecture d’un disque.
Pour démarrer Installation des piles dans la télécommande Type de piles : AAA 1 2 | REMARQUE | Assurez-vous de placer les signes « + » et « – » des extrémités des piles tel que l’indique le diagramme à l’intérieur du compartiment. Si le téléviseur fonctionne selon un usage normal du téléviseur, les piles durent environ un an. La télécommande peut être utilisée à une distance pouvant aller jusqu’à 7 mètres (23 pi) du produit, en ligne droite.
Connexions Si vous fixez le noyau torique en ferrite au cordon électrique de l’unité principale, cela empêchera les interférences RF des signaux radioélectriques. 1. Tirez la languette de fixation du noyau torique en ferrite pour ouvrir celui-ci. 2. Faites une boucle à deux reprises avec le cordon d’alimentation de l’unité principale. 3. Fixez le noyau torique en ferrite au cordon électrique de l’unité principale tel qu’illustré et appuyez jusqu’à ce qu’il s’encliquette.
Connexions Composants des enceintes VIS (5X15): 2EA VIS (5X20): 6EA SWA-5000 BASE DU PIED CÂBLE D’ENCEINTE PIED (G) (D) Module récepteur sans fil CENTRALE (G) (D) Câble d’enceinte (2EA) AVANT/AVANT SUPÉRIEURES AMBIOPHONIQUES Carte TX CAISSON DES BASSES Installation des enceintes avant sur les pieds Tall Boy Pour assembler une enceinte, suivez les étapes ci-dessous : 1. Retournez la base du pied et connectez-la au bas du pied. 2.
Connexion des enceintes Rouge Connexions LAN 03 1. Accouplez chaque faisceau de câbles avec l’enceinte appropriée en appariant la fiche codée par couleur de chaque faisceau avec l’étiquette de couleur apposée sur chaque enceinte. 2. Pour fixer le câble d’enceinte à chaque enceinte : a. Appuyez sur la languette rouge située à l’arrière de l’enceinte, insérez le Noir fil rouge et relâchez la languette. b.
Connexions | MISES EN GARDE | Si vous souhaitez installer le produit sur le mur, fixez solidement les vis ou les pointes sur le mur et utilisez les trous situés à l’arrière de l’enceinte pour l’installation. Toutefois, si vous choisissez ce mode d'installation, les accessoires (pointes ou vis) et outils d'installation ne sont pas fournis par la compagnie. Ne laissez pas les enfants jouer avec les enceintes ou à proximité. Ils pourraient se blesser si une enceinte tombe.
Connexion d’un iPod/iPhone 03 Utilisation du câble USB Connexions À l’aide du câble USB, connectez un iPod/iPhone au port USB avant. ASC IN 5V 500mA 5V 500mA Utilisation du socle Pour visionner la vidéo stockée sur votre iPod via le téléviseur, vous devrez également connecter la prise de sortie vidéo du produit à la prise d'entrée vidéo du téléviseur. Voir page 20.
Connexions Connexion à un téléviseur Sélectionnez la méthode 1 ou 2. • Si vous avez configuré la télécommande du produit de façon à ce qu’elle commande votre téléviseur, appuyez sur la touche TV SOURCE de la télécommande, puis sélectionnez la source à laquelle le produit est connecté (HDMI, Vidéo In, etc.) pour visionner la vidéo depuis le cinéma maison.
Connexion aux périphériques W Rouge AUX IN Blanc Connexions R 03 Pour sélectionner le mode approprié à un périphérique, appuyez sur le touche FUNCTION. Chaque fois que vous appuyez sur ce touche, le mode change dans l’ordre suivant : BD/DVD D. IN AUX R.
Connexions Connexion à un routeur réseau Réseau sans fil Vous pouvez connecter votre produit à votre réseau selon l'une des méthodes illustrées ciaprès.
Définition des paramètres Procédure relative aux paramètres Si vous sautez la configuration de réseau sans fil maintenant, allez à « Réseau sans fil », page 33, pour configurer la connexion sans fil du produit plus tard. 5 · Le produit recherche puis affiche toutes les connexions réseau disponibles du routeur. Définition des Paramètres 1 . Allumez votre téléviseur après avoir connecté le produit, puis allumez le produit.
Définition des Paramètres Paramètres initiaux > Paramètres réseau (4/5) Entrez le code de sécurité. 0 entered - WPS PIN a b c d e f 1 2 3 Précédent g h i j k l 4 5 6 Suivant m n o p q r 7 8 9 s t u v w x y z 0 A/a Space Passer 8 · Entrez la clé de sécurité de votre réseau. Ensuite, utilisez les touches ▲▼ ◄► pour sélectionner Suivant, puis appuyez sur la touche E. 11 .
Écran Accueil Paramètres initiaux > Calibrage automatique du son 04 AllShare Play Lecture de vidéos, photos ou musique de disques, USB, PC ou appareils mobiles. Précédent Mettre le microphone de calibrage ici. Utilisateur Suivant Passer 2 3 4 1 Smart Hub 13 · L’écran Calibrage automatique du son apparaît. Branchez le microphone ASC à la prise d’entrée ASC IN du produit. 14 · Appuyez sur la touche E pour sélectionner le bouton Suivant.
Définition des Paramètres Accès à l’écran Paramètres 1 . Sur l’écran Accueil, sélectionnez Paramètres, puis appuyez sur la touche E. L'écran Paramètres apparaît. 3 Touche E (Entrer) / DIRECTION : ~ Appuyez sur les touches ▲▼◄► pour déplacer le curseur ou sélectionner un élément du menu. ~ Appuyez sur la touche E pour activer l’élément actuellement sélectionné ou confirmer un paramètre. 4 Touche EXIT : Appuyez sur cette touche pour quitter le menu.
Fonctions du menu Paramètres Format d'image télé Taille écran Smart Hub BD Wise Définition Fréquence cinéma (24 ips) Format couleurs HDMI Couleurs profondes HDMI Mode progressif Vous permet de régler la sortie du produit en fonction de la taille de l’écran de votre téléviseur. Voir une description des options de taille d’écran page 24, étape 12. Vous permet de sélectionner la taille optimale pour l’écran Smart Hub. BD Wise est la fonctionnalité d’interconnectivité la plus récente de Samsung.
Définition des Paramètres Audio Réglage hautparleurs Calibrage automatique du son Equalizer Vous permet de définir les options des enceintes. Le produit crée automatiquement un champ sonore optimisé pour votre environnement. Voir page 32. Vous permet de configurer manuellement les paramètres de l’égaliseur. Vol. intelligent Vous permet de configurer le produit de sorte que le volume demeure stable lorsqu’un changement de scène se produit ou lorsque vous changez de chaîne. Sélect.
Réseau État du réseau Vous permet de vérifier si une connexion au réseau et à Internet a été établie. Wi-Fi Direct Vous permet de connecter un appareil Wi-Fi Direct au produit en utilisant un réseau d’entités homologues sans utiliser de routeur sans fil. Vous pouvez utiliser l’appareil pour commander le produit. AP logiciel Vous permet de connecter sans fil d’autres types d’appareils Wi-Fi au produit.
Définition des Paramètres Système Paramètres initiaux Vous permet d’exécuter de nouveau la procédure relative aux Paramètres initiaux. Voir les détails page 23. Vous pouvez connecter un clavier ou une souris sans fil USB au port USB situé à l’avant du produit. Réglages du clavier: Vous permet de configurer un clavier sans fil USB connecté au produit. | REMARQUE | Vous pouvez uniquement utiliser le clavier sur un écran à clavier QWERTY.
1 . Retirez le disque ou le périphérique USB. Définition des Paramètres Changer NIP 04 Sécurité Le NIP par défaut est 0000. Entrez le NIP par défaut pour accéder à la fonction de sécurité si vous n’avez pas créé votre propre mot de passe. Classement BD: Empêche la lecture des disques Blu-ray comportant un classement égal ou supérieure à une tranche d'âge spécifique à moins d'entrer le NIP. Classem.
Définition des Paramètres Calibrage automatique du son Il suffit de régler une seule fois la fonction Calibrage automatique du son (ASC) lorsque vous déplacez ou installez le produit; ce dernier reconnaîtra automatiquement la distance entre les enceintes, les différents niveaux de puissance entre les canaux et les caractéristiques de fréquence afin de reproduire un champ sonore 7.1 optimisé pour votre environnement d’écoute.
< Obtention des valeurs des paramètres réseau > Câblé - Manuel Suite aux étapes 1 à 3 ci-dessus: 1 · Sélectionnez Démarrer sur l'écran Paramètres réseau, puis appuyez sur le touche E. L'écran État du réseau apparaît. Le produit tente de vérifier la connexion réseau et échoue. • Windows XP 1 · Cliquez avec le touche droit de la souris sur l’icône Réseau située dans la partie inférieure droite du bureau de Windows. 2 · Dans le menu contextuel, cliquez sur État.
Définition des Paramètres Sans fil (Général) - Automatique Après avoir suivi les étapes 1 à 3 de la section « Configuration de votre connexion réseau » à la page 32. 1 · Sélectionnez Démarrer sur l'écran Paramètres réseau, puis appuyez sur le touche E. Le produit recherche les réseaux disponibles, puis en affiche la liste. Paramètres réseau Sélect. votre routeur sans fil dans la liste.
Vous pouvez obtenir ces valeurs auprès de votre fournisseur de services Internet. Vous pouvez aussi afficher ces valeurs sur la plupart des ordinateurs équipés de Windows. Pour consulter les instructions, veuillez vous reporter au chapitre « Obtention des valeurs des paramètres réseau » de la page 33. 13 · Une fois terminé, sélectionnez OK, puis appuyez sur le touche E. L'écran État du réseau apparaît. L'appareil vérifie la connexion réseau puis se connecte à celui-ci.
Définition des Paramètres Par l’intermédiaire du produit en utilisant la configuration par touches PBC 1 · Sélectionnez l’appareil Wi-Fi Direct que vous souhaitez connecter à ce produit, puis appuyez sur la touche E. La fenêtre en incrustation PBC/PIN (PBC/NIP) apparaît. 2 · Sélectionnez PBC, puis appuyez sur la touche E. La fenêtre en incrustation PBC apparaît. 3 · Dans les 2 minutes, appuyez sur le bouton PBC de l’appareil Wi-Fi Direct.
Mise à niveau logicielle 1 · Dans le menu Accueil, sélectionnez Paramètres, puis appuyez sur la touche E. 2 · Sélectionnez Assistance, puis appuyez sur la touche E. 3 · Sélectionnez Mise à jour du logiciel, puis appuyez sur la touche E. 4 · Sélectionnez l’une des méthodes suivantes: • En ligne • USB • Par disque • Par télécharg. • Mise à niveau en mode veille 5 · Appuyez sur la touche E. Les instructions pour chaque méthode commencent.
Définition des Paramètres Par disque 1 · Visit www.samsung.com. 2 · Cliquez sur SOUTIEN dans la partie supérieure droite de la page. 3 · Entrez le numéro de modèle du produit dans le champ de recherche, puis cliquez sur Rechercher produit. 4 · Cliquez sur Télécharger au centre de la page, sous l’en-tête Téléchargements. 5 · Cliquez sur Micrologiciel au centre de la page. 6 · Cliquez sur l’icône ZIP dans la colonne Fichier située sur le côté droit de la page.
Diffuseur de Médias Pour accéder à l’écran AllShare Play, sélectionnez l’icône AllShare Play à l’écran principal, puis appuyez sur la touche E. Utilisation de l’écran AllShare Play AllShare Play / MaListe / Dernière lecture MaListe Vidéos Lecture de contenu vidéo, photo ou musique 1 · S’assurer que la source du contenu que vous souhaitez lire ou visionner est connectée ou insérée dans le produit.
Diffuseur de Médias Lecture de fichiers contenus sur périphérique USB ou un iPod/iPhone Il est possible de lire les fichiers multimédias situés sur un périphérique USB connecté. 1 · Lorsque le produit est éteint, connectez un périphérique USB ou un iPod/iPhone. 2 · Allumez le produit. Lorsque l’écran Principal apparaît, sélectionnez AllShare Play > Vidéos, Photos ou Musique > Appareil connecté, puis appuyez sur la touche E.
Écran Fonction Vous pouvez aussi changer de source en appuyant sur la touche Fonction située en haut à droite sur la télécommande. Pour accéder à l’écran Fonction, sélectionnez l’icône Fonction à l’écran principal, puis appuyez sur la touche E. AllShare Play / Musique / Options de l’écran Fonction Pour sélectionner une option, mettez-la en surbrillance à l’aide des touches ▲▼, puis appuyez sur la touche E . Entrée num.
Diffuseur de Médias Lecture d’un disque dont le contenu a été enregistré par l’utilisateur Il est possible de lire les fichiers multimédias que vous avez enregistrés sur des DVD ou des CD. 1 · Placez un disque audio enregistré dans le tiroir disque avec l’étiquette sur le dessus, puis fermez le tiroir disque. La fenêtre en incrustation Appareil connecté apparaît.
Ordinateur Produit Connexion AllShare Lecture des fichiers de l'ordinateur 1 · Connectez le produit, votre PC et/ou votre téléphone cellulaire compatible avec la norme DLNA au même réseau sans fil. 2 · Suivez les directives du manuel d'installation et d'utilisation de l'application AllShare pour configurer les périphériques et les fichiers média. 3 · Sélectionnez AllShare Play à l’écran Accueil du produit, puis appuyez sur la touche E. L’écran AllShare Play apparaît.
Diffuseur de Médias Commande de la lecture des vidéos Vous pouvez commander la lecture des fichiers de vidéo se trouvant sur un disque Blu-ray, DVD et CD et sur un périphérique USB. Selon le disque, certaines des fonctions décrites dans ce manuel pourraient ne pas être offertes. Touches de la télécommande utilisées pour la lecture des vidéos DISC MENU TITLE MENU 0 MUTE HOME 1 · Pendant la lecture, appuyez sur la touche REPEAT de votre télécommande.
Menu qui apparaît uniquement pendant la Pendant la lecture, appuyez sur la touche TOOLS. lecture d’un disque BD/DVD Mode de répétition Sélectionnez pour répéter un titre ou un chapitre spécifique (disques BD/DVD uniquement) ou une section marquée. Fonctionne comme la touche REPEAT button. Voir page 44. Plein écran Sélectionnez pour définir la taille de plein écran souhaitée. Vous pouvez sélectionner Original, Mode1 (plus grand) et Mode2 (le plus grand).
Diffuseur de Médias Commande de la lecture de la musique Vous pouvez commander la lecture du contenu musical situé sur un DVD, un CD ou un périphérique USB. Touches de la télécommande utilisées pour la lecture de la musique 6 1 2 3 4 5 6 7 8 DISC MENU 9 TITLE MENU 0 POPUP 5 MUTE 4 1 2 3 1 2 3 Lecture accélérée (CD audio [CD-DA]) uniquement Pendant la lecture, appuyez sur la touche 3 ou . Chaque fois que vous appuyez sur la touche 3 ou , la vitesse de lecture change.
Vous pouvez extraire de la musique d’un CD de musique vers un périphérique USB inséré dans la prise USB. 1 · Insérez le périphérique USB dans la prise USB située à l’avant du produit, puis appuyez sur la touche RETURN (') de votre télécommande. 2 · Insérez le disque duquel vous souhaitez extraire dans le produit et fermez le tiroir disque. 3 · Tandis que l’écran Lecture est affiché, appuyez sur la touche TOOLS . Le menu Outils apparaît.
Diffuseur de Médias | REMARQUE | Selon le disque ou le support d’enregistrement utilisé, le menu Outils pourrait différer. Il se peut que toutes les options ne soient pas affichées. Pour pouvoir activer la fonction Fond musical, le fichier de photos doit se trouver dans la même unité de stockage que le fichier de musique. La qualité sonore pourrait toutefois être atténuée par le débit binaire du fichier MP3, la taille de la photo et la méthode d'encodage.
| REMARQUE | Vous pouvez aussi aller sur Choisir tout à droite, puis appuyer sur le touche E pour sélectionner toutes les pistes ou fichiers. Sélectionnez Modif. liste pour retirer des fichiers ou des pistes d'une liste de lecture existante. Le périphérique contenant la liste d’écoute doit être inséré dans le produit ou connecté à celui-ci. 3. Sélectionnez Envoyer du côté droit, puis appuyez sur le touche E. 4.
Diffuseur de Médias Encodage Le chiffrement - qui diffère selon la langue ou la zone géographique modifie le mode de tri et d’organisation des produits, la présentation des fichiers ou des pistes musicales, les dates d’affichage, etc. Sélectionnez Encodage pour modifier l'encodage qui correspond à votre langue ou région. Information Affichage des informations sur les fichiers et les contenus. | REMARQUE | Selon le disque ou le support d’enregistrement utilisé, le menu Outils pourrait différer.
Dolby Pro Logic II Mode Eff. son. Vous pouvez apprécier la lecture d’une vidéo ordinaire 2D en mode 3D. | REMARQUE | Si vous passez au menu Accueil ou Accueil Smart Hub en mode 3D, il passera automatiquement au mode 2D. vTuner Diffuseur de Médias • Cinéma : rend une piste sonore plus réaliste. • Musique : lorsque vous écoutez de la musique, vous pouvez apprécier les effets sonores comme si vous écoutiez un vrai concert. • Jeu : Améliore l’attrait de l'audio du jeu.
Services Réseau Vous pouvez profiter de différents services réseau comme Smart Hub ou BD-LIVE en connectant le produit à votre réseau. Smart Hub d'un coup d'œil 1 Pour utiliser les services réseau, vous devez d’abord : 34 Search 1 · Connecter le produit au réseau. (Voir page 22.) 2 · Configurer les paramètres réseau. (Voir page 32-36.
0 Applications Samsung : Cette option vous permet de télécharger des services d'applications payants ou gratuits. Aperçu du navigateur Web 1 Services Réseau Mes Applications : Affiche votre galerie personnelle d'applications au sein de laquelle vous pouvez ajouter, modifier ou supprimer des. éléments. 06 9 http://www.google.com/ Utilisation du navigateur Web Vous pouvez accéder à Internet en utilisant le navigateur Web qui est installé dans l’écran Smart Hub par défaut.
Services Réseau 2 Aide à la navigation : Affiche les touches de la télécommande que vous pouvez utiliser pour naviguer dans le navigateur Web. • VERTE (B) : Pour afficher le panneau de configuration. • JAUNE (C) : Pour rechercher un lien. • Tools : Pour afficher la fenêtre Outils. • Exit : Pour revenir au menu précédent.
Annexe Information complémentaire 07 Remarque Connexions • Selon votre téléviseur, certaines résolutions de sortie HDMI pourraient être incompatibles. • Vous devez avoir une connexion HDMI pour visionner les vidéos en 3D. • Un câble HDMI qui est trop long pourrait entraîner du bruit à l’écran. Si c’est le cas, réglez la fonction Couleurs profondes HDMI en la réglant à Désac. dans le menu.
Annexe Anynet+ (HDMI-CEC) • Selon le type de votre téléviseur, certaines résolutions de sortie HDMI peuvent ne pas être prises en charge. Veuillez vous reporter au guide d'utilisation de votre téléviseur. • Cette fonction n’est pas disponible si le câble HDMI ne peut prend pas en charge le format CEC. • Si le logo Anynet+ est apposé sur votre téléviseur Samsung, le téléviseur prend en charge la fonction Anynet+.
Lecture d’un fichier vidéo • L’indicateur ◄► ne s’affichera pas à l’écran si la section BONUSVIEW ne contient pas de paramètres audio BONUSVIEW. • Les langues disponibles avec la fonction Langue audio sont celles qui ont été encodées sur le disque. Cette fonction ou certaines langues pourraient ne pas être offertes. • Certains disques Blu-ray pourraient autoriser la sélection de la piste sonore audio numérique PCM ou Dolby en anglais.
Annexe Lecture de la musique • Réglez le volume à un niveau modéré avant de connecter votre iPod au produit. • Lorsque vous connectez un iPod alors que le produit est sous tension, le produit charge la pile de l’iPod. Lecture d’un film AllShare Play • La sortie VIDEO (composite) doit être connectée à votre téléviseur pour visionner la vidéo de l’iPod (voir page 20). • Si vous souhaitez que la vidéo de l’iPod soit lue par la sortie VIDEO, vous devez régler Anynet+ (HDMI-CEC) à Désact..
Résolution en fonction du mode de sortie Lecture de contenus de disques Blu-ray/e-Content/Numérique 07 Sortie Mode VIDÉO Mode VIDÉO 1080p à 60 ips 480i - Résolution max. de l'entrée du téléviseur Résolution max.
Annexe Sélection de la sortie numérique Configuration PCM Train de bits (non traité) Connexion Train de bits (DTS réencodé) Train de bits (Dolby D réencodé) Récepteur A/V HDMI PCM Jusqu’à 7.1 canaux PCM PCM DTS ré-encodé Dolby numérique réencodé* Dolby numérique Jusqu’à 7.1 canaux PCM Dolby numérique DTS ré-encodé Dolby numérique réencodé* Dolby numérique Plus Jusqu’à 7.1 canaux PCM Dolby numérique Plus DTS ré-encodé Dolby numérique réencodé* Jusqu’à 7.
Dépannage Vérification/Résolution Annexe Symptôme 07 Reportez-vous au tableau ci-dessous lorsque ce produit ne fonctionne pas correctement. Si le problème que vous éprouvez ne figure pas ci-dessous ou si les instructions ci-dessous ne vous aident pas, éteignez le produit, débranchez le cordon d’alimentation et communiquez avec Samsung Electronics en composant 1-800-SAMSUNG. • Le cordon d’alimentation a-t-il été solidement branché dans la prise? Je ne peux pas éjecter le disque.
Annexe Symptôme L’écran des menus n’apparaît pas, même lorsque la fonction du menu est sélectionnée. Le format d’image ne peut pas être modifié. • Le produit ne fonctionne pas. (Exemple : L'alimentation se coupe ou un bruit étrange est émis.) • Le produit ne fonctionne pas normalement. Vous avez oublié le mot de passe pour le niveau de classement. Vérification/Résolution • Utilisez-vous un disque qui ne contient pas de menus? • Le produit peut lire les disques 16:9 Blu-ray/DVD en mode 16:9 plein écr.
Symptôme Vérification/Résolution 07 Fonction AllShare Play • AllShare Play montre uniquement les fichiers correspondant aux catégories Photos, Musique et Films. Les fichiers qui n'entrent pas dans ces catégories pourraient ne pas s'afficher. Les fichiers vidéo sont lus par intermittence • Vérifiez si le réseau est stable. • Vérifiez si le câble réseau est connecté correctement et si le réseau n’est pas surchargé. • La connexion sans fil entre le serveur et le produit est instable. Vérifiez la connexion.
Annexe Caractéristiques techniques Poids Général Syntoniseur FM 16,93 (L) x 2,56 (H) x 13,91 (P) inches Plage de températures d’utilisation +41°F à +95°F Plage de taux d’humidité d’utilisation 10 % à 75 % Rapport signal/bruit 55 dB Sensibilité utilisable 12 dB Distorsion harmonique totale 0,5 % BD (disque Blu-ray) Vitesse de lecture : 9,834 m/s DVD (disque Digital Versatile) Disque CD : 5 po (DISQUE COMPACT) CD : 3 1/2 po (DISQUE COMPACT) Sortie vidéo Vidéo composite Vidéo/Audio HDMI Ampl
Impédance 3Ω Gamme de fréquences 140 Hz-20 kHz 140 Hz-20 kHz 140 Hz-20 kHz 140 Hz-20 kHz 40 Hz-160 kHz Ambiophonique Centrale 3Ω 3Ω Caisson des basses 3Ω Niveau de pression 87dB/W/M sonore de sortie 87dB/W/M 87dB/W/M 87dB/W/M 88dB/W/M Entrée nominale 165W 165W 165W 170W 170W Entrée maximum 330W 330W 330W 340W 340W Dimensions (L x H x P) Avant/Avant supérieure : 3,74 x 47,71 x 2,76 (Base du pied: 9.44 x 9.
GARANTIE LIMITÉE DE L’ACHETEUR INITIAL Samsung Electronics Canada Inc. (SECA) garantit ce produit contre les vices de matériau(x) et de fabrication. Si l'appareil ne fonctionne pas convenablement durant la période de garantie et que son mauvais fonctionnement est dû à un défaut de matériau(x) ou de fabrication, SECA réparera ou remplacera, à sa seule discrétion, l'appareil défectueux. Toutes les réparations sous garantie doivent être effectuées par un centre de service autorisé SECA.
Contacter SAMSUNG À TRAVERS LE MONDE Si vous avez des questions ou commentaires concernant les produits Samsung, veuillez communiquer avec le service à la clientèle SAMSUNG. Area Contact Center Web Site ` North America Canada 1-800-SAMSUNG (726-7864) www.samsung.com Mexico 01-800-SAMSUNG (726-7864) www.samsung.com U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com AH68-02464B-01 HT-E6730W_ZC_FRC_0314.