HT-H5500W HT-H5530 5.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-H5500W_30_ZC-0416.
Safety Information This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. • The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
WARNING : • TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. NOTE TO CATV SYSTEM INSTALLER This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
Safety Information 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
Contents GETTING STARTED NETWORK SERVICES Accessories 34 Using BD-LIVE™ 6 Speaker Components 34 Using DLNA 7 Front Panel 34 Apps 7 Rear Panel 35 Using Opera TV Store 8 Remote Control 36 Screen Mirroring 9 Connecting the Speakers CONNECTIONS Contents 6 APPENDIX 37 Additional Information 12 Attaching the Toroidal Ferrite Core to the Power Cord of the Wireless Receiver Module (SWA6000) 13 Connecting to a TV and External Devices 38 Disk and Format Compatibility 43 Troubleshooting 46 Speci
Getting Started Check the box for the accessories and speaker components listed or shown below.
Front Panel DISPLAY ICONS STOP PLAY/PAUSE OPEN/ CLOSE VOLUME CONTROL POWER Getting Started FUNCTION DISPLAY 5V 0.5A DISC TRAY ✎ ✎ ✎ ✎ REMOTE CONTROL SENSOR USB When the product is on, do not let children touch the product's surface. It will be hot. To upgrade the product's software through the USB jack, you must use a USB flash drive. When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the /6 button on the product or the remote.
Getting Started Remote Control Tour of the Remote Control Turn the product on and off. FUNCTION VOLUME Adjust the volume. MUTE - + 1 2 3 4 5 6 7 8 Press to select Home Theater's mode. (BD/DVD, D. IN, AUX, etc.). To open and close the disc tray. Cut off the sound temporarily. Press numeric buttons to operate options. 9 DISC MENU TITLE MENU Press to view the disc menu. 0 POPUP Press to skip backwards or forwards. Press to play a disc or files. Press to stop a disc or files.
Connections This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Subwoofer Center Subwoofer Center Front (R) Front (R) Surround (R) Product Front (L) Front (L) Surround (L) Surround (R) Connections Product Surround (L) Wireless Receiver Module * HT-H5500W Surround speakers must be connected to the wireless receiver module.
Connections Installing the Speakers on the Tallboy Stand * HT-H5530 only - Front Speakers 1. 2. Turn the Stand Base upside-down and connect it to the Stand. Use the driver to combine the screws on the 3 marked holes. 1 Stand Base 2 Stand 3. 4. Straighten a supplied speaker wire to the gravity direction and put in the hole on the center of Stand Base. Connect the upper Speaker to the assembled Stand. 3 4 Speaker Stand 5. 6.
* HT-H5500W Front Speaker (L) Center Speaker Subwoofer Front Speaker (R) Surround Speaker (R) Connections Surround Speaker (L) Wireless Receiver Module * This product should be connected with the SWA-6000 only. * HT-H5530 Front Speaker (L) Center Speaker SURROUND SURROUND Subwoofer Front Speaker (R) SURROUND Surround Speaker (L) Surround Speaker (R) SURROUND ✎ ✎ ✎ ✎ If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.
Connections ✎ If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless receiver module. With the product turned off, press "0""1""3""5" on the remote control. Turn on the wireless receiver module. Then, press and hold the "ID SET" button on the back of the wireless receiver module for 5 seconds, and then turn the product on.
Connecting to a TV and External Devices Red W White Method 1 External Devices Connections R Method 2 AUDIO OUT OPTICAL OUT HDMI IN Connecting to a TV Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with only this cable connected. See page 18 in this manual and the section on ARC in your TV's user's manual for details.
Connections Connecting to a Network Router Wireless Network You can connect your product to your network router using one of the methods illustrated below. Wired Network Wireless IP sharer Broadband modem (with integrated router) Broadband service Broadband service Or ✎ Router Broadband service ✎ ✎ Broadband modem ✎ ✎ ✎ ✎ Your router or your Internet Service Provider's policies may prevent the product from accessing Samsung's software update server.
Settings 4:3 Pan-Scan - For older, standard screen, analog TVs. Displays 4:3 pictures in full screen and 16:9 pictures in Pan-Scan format that fills the screen, but cuts off the left and right sides of the picture and enlarges the middle vertically. The Initial Settings Procedure • The Home menu will not appear if you do not configure the initial settings. • The OSD (On Screen Display) may change in this product after you upgrade the software version.
Settings The Home Screen at a Glance 1 8 Function 2 Play Disc Photos Videos Music Use for switching to an external device, and for radio and mode switching for a Bluetooth connection. You can use the remote control’s FUNCTION button and the main unit’s button for mode switching. 9 Settings Set various functions to suit your personal preferences.
Buttons on the Remote Control Used for the Settings Menu SUBTITLE 1 HOME Display REPEAT 3D Settings TOOLS INFO 3 2 Settings Menu Functions EXIT RETURN 4 TUNER HOME Button : Press to move to the Home screen. 2 RETURN Button : Press to return to the previous menu. 3 E (ENTER) / DIRECTION Button : • Press ▲▼◄► to move the cursor or select an item. • Press the E button to activate the currently selected item or confirm a setting.
Settings HDMI Deep Color Dynamic Range Control Lets you set the product to output video from the HDMI OUT jack with Deep Color. Deep Color provides more accurate color reproduction with greater color depth. Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio. Auto: Automatically controls the dynamic range of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Also turns dynamic range control off for Dolby Digital and Dolby Digital Plus.
Language Screen Mirroring The Screen Mirroring function lets you view the screen of your smart phone or smart device on the TV you have connected to the home theater system. (See page 36) Lets you select the language you prefer for the OnScreen Menu, disc menu, etc. • The selected language will only appear if it is supported on the disc. Device Name Security The default PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN.
Settings Network Setup Network Settings Wired network connection failed. When you connect this product to a network, you can use network based applications and functions such as BD-LIVE and upgrade the product's software through the network connection. Configuring Your Network Connection To begin configuring your network connection, follow these steps: 1. In the Home screen, select Settings, and then press the E button. 2. Select Network, and then press the E button. 3.
4. Wireless - Automatic Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 20) 1. In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks. Network Settings Select your network type. Network Type Wireless network You can connect your BD Home Theater to the internet. Please select which wireless network to use.
Settings ✎ You can get the Network parameter values from your Internet provider. Wi-Fi Direct 11. When finished, select Return ('), and then press the E button. The Security Key screen appears. The Wi-Fi Direct function allows you to connect WiFi Direct devices to the product and each other using a peer-to-peer network, without a wireless router. 12. On the Security Key screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control.
2. 3. When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the E button to accept. The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. • The PBC and PIN procedures connect devices automatically. • Never turn the product off or back on manually during the update process.
Settings 4. Left click your product's model number in the drop down list. 5. On the page that appears, scroll down to and then click Firmware Manuals & Downloads. 6. Click Firmware in the center of the page. 7. Click the ZIP icon in the File column on the right side of the page. 8. Click Send in the first pop-up that appears. Click OK in the second pop-up to download and save the firmware file to your PC. 9. Unzip the zip archive to your computer.
Playing Content Your home theater can play content located on Blu-ray/DVD/CD discs, USB devices, PCs, smart phones, tablets, and in Apps. To play content located on your PC or a mobile device, you must connect the PC or mobile device and the product to your network. To play content on your PC, you must also download and install DLNA network software or already have DLNA network software on your PC. ✎ PCs running Windows 7 and Windows 8 have DLNA software (Play To) built in.
Playing Content 3. A screen appears listing the contents of the disc. Depending on how the contents are arranged, you will see either folders, individual files, or both. 3. 4. If necessary, use the ▲▼◄►buttons to select a folder, and then press the E button. 5. 5. Use the ▲▼◄► buttons to select a file to view or play, and then press the E button. 6. 6. Press the RETURN button one or more times to exit a current screen, exit a folder, or to return to the Home screen.
Controlling Video Playback 2 Using the disc menu, title menu, popup menu, and title list You can control the playback of video content located on a Blu-ray/DVD disc, USB device, mobile device, or PC. Depending on the disc or contents, some of the functions described in this manual may not be available. Buttons on the Remote Control used for Video Playback DISC MENU TITLE MENU 0 POPUP 2 1 DISC MENU During playback, press this button to display the Disc menu.
Playing Content Using the TOOLS Menu Subtitle During playback, press the TOOLS button. Lets you set the desired subtitle language. Title Angle If there is more than one title on a disk or device, lets you move to or select a desired title. To view a scene from another angle. The Angle option displays the number of angles available to view (1/1, 1/2, 1/3, etc.). Playing Time Lets you go to a specific playback point. Use the numeric buttons to input the playback point.
Pl li Playlist Repeat Mode 4 Fast Play (Audio CD [CD-DA] only) : During playback, press the 3 or button. Each time you press the 3 or button, the playback speed will change. 5 7 button : Pauses a track. 6 6 button : Plays the currently selected track. 0/16 Tools TRACK 001 Track Rip > Move < Adjust ' Return TRACK 003 04:41 TRACK 004 04:02 TRACK 005 03:43 TRACK 006 03:40 00:00/00:00 Repeating Tracks " Pause CD 2.
Playing Content 4. To remove a file from the Playlist, move to the file, and then press the YELLOW (C) button. ✎ 5. Press the E button to play the selected files. The Playlist screen appears. ✎ 6. To go to the Music List, press the 5 or RETURN button. 7. ✎ ✎ To go back to the Playlist, press the E button. You can create a playlist with up to 99 tracks on Audio CDs (CD-DA).
✎ ✎ Depending on the disc or storage device, the Tools menu may differ. All options may not be displayed. To enable the background music function, the photo file must be in the same storage media as the music file. However, the sound quality can be affected by the bitrate of the MP3 file, the size of the photo, and the encoding method. Presetting Stations Example : Presetting FM 89.10 into memory. 1. Press the FUNCTION button to select FM. 2. Press the TUNING UP, DOWN button to select <89.10>. 3.
Playing Content • The Home Theater has an effective reception range of up to 32.8 feet in all directions if there are no obstacles. The connection will be automatically cut off if the device is out of this range. Even within this range, the sound quality may be degraded by obstacles such as walls or doors. • This wireless device may cause electrical interference. during its operation.
Using the Bluetooth Power On Use TV SOUND: 1) When you want to listen to the TV's audio through the home theater speakers. 2) When you want to listen to the audio from a USB device plugged into the TV through the home theater speakers. TV SOUND ON/OFF support specifications: When the home theater is turned off, connecting your smart device to the product via a Bluetooth connection can turn the home theater on. ✎ Quick Start function is available when AC Power Cord is connected to AC Source.
Network Services Using BD-LIVE™ 3. On your home theater, select Change Device. 4. Use the ▲% button to select your PC in the Device List. 1. Connect the product to the network. (See page 14) 5. Select the kind of file you want to view or play, Photos, Videos, or Music and then press E. 2. Configure the network settings. (See pages 20~22) 6. Once the product is connected to your network, you can enjoy various movie-related service contents available on BD-LIVE compliant discs.
Using Apps Using Opera TV Store The first time you access any one of the apps, the home theater displays two agreements. You must accept both agreements to download and use any apps. By default, the home theater displays four popular apps on the Home screen. You can view more apps and change the apps the home theater displays on the Home screen by selecting the More button. To start an app, highlight the app, double click it, and then follow the directions displayed on the screen.
Network Services 4. Repeat this process to delete additional apps. 5. When finished, select DONE, and then press the E button. 6. Press the RETURN button to go back to the Main screen. • Bluetooth transmissions can interfere with the Screen Mirroring signal. Before using the Screen Mirroring function, we strongly recommend that you turn off the Bluetooth function on your smart phone or smart device. Searching for Apps 1. Select SEARCH at the top of the screen, and then press the E button. 2.
Appendix Additional Information Digital Output Notes Connections HDMI OUT • Certain HDMI output resolutions may not work, depending on your TV. • You must have an HDMI connection to enjoy videos with 3D technology. • A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu. Settings 3D Settings TV Aspect Ratio • Depending on the disc type, some aspect ratios may not be available.
Appendix Playing Content HDMI audio • When HDMI audio is output to the TV speakers, it is automatically down-mixed to 2 channels. Audio Return Channel • When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available. • Using an HDMI cable not certified for ARC (Audio Return Channel) may cause a compatibility problem. • The ARC function is only available if an ARCcompliant TV is connected.
✎ ✎ ✎ Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30 Mbps. Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary. When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Appendix 1 The U.S., U.S. territories and Canada 2 Europe, Japan, the Middle East, Egypt, Africa, Greenland 3 Taiwan, Korea, the Philippines, Indonesia, Hong Kong 4 Mexico, South America, Central America, Australia, New Zealand, Pacific Islands, Caribbean 5 Russia, Eastern Europe, India, North Korea, Mongolia 6 China ✎ ✎ ✎ Some AVCHD format discs may not play, depending on the recording conditions. AVCHD format discs need to be finalized. "x.v.
Video File Support File Extension Container Video Codec Audio Codec *.avi AVI MP4v3 H.264 BP/MP/HP MP3, Dolby Digital, DTS, WMA, PCM Resolution *.mkv MKV VC-1 AP H.264 BP/MP/HP MP3, Dolby Digital, DTS *.wmv WMV (wmv9) VC-1 AP VC-1 SM WMA *.mp4 MP4 MP4 (mp4v) H.264 BP/MP/HP AAC *.mpg / *.mpeg PS MPEG1 MPEG2 H.
Appendix Digital Output Selections Setup Bitstream (Unprocessed) PCM Connection Audio Stream on Blu-ray Disc Audio Stream on DVD Definition for Blu-ray Disc Bitstream (Re-encoded Dolby D) HDMI supported AV receiver PCM Up to PCM 7.1ch PCM Dolby Digital Up to PCM 5.1ch Dolby Digital Dolby Digital Plus Up to PCM 5.1ch Dolby Digital Plus Dolby TrueHD Up to PCM 5.1ch Dolby TrueHD DTS Up to PCM 5.1ch DTS DTS-HD High Resolution Audio Up to PCM 5.
Resolution according to the output mode Blu-ray Disc/E-contents/Digital Contents playback DVD playback HDMI Mode Output Setup BD Wise E-contents/ Digital contents HDMI Mode Blu-ray Disc Resolution of Blu-ray Disc 1080p@60F 480i Auto Max. Resolution of TV input 1080p@60F 1080p@60F Max. Resolution of TV input - 1080p - 1080p Movie Frame : Auto (24Fs) 1080p@24F - 1080i 1080i 1080i 720p 720p 720p 480p 480p 480p Troubleshooting Symptom Check/Remedy You cannot eject the disc.
Appendix Symptom Check/Remedy The remote control does not work. • Are you operating the remote within its operational range and within the proper angle relative to the sensor? • Are the batteries drained? • Have you selected the mode (TV/BD) functions of the remote control (TV or BD) correctly? • The disc is rotating but there is no picture. • Picture quality is poor and the picture is shaking. • • • • Audio language and subtitles do not work.
Symptom Check/Remedy If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV. • Press and hold the 5 button on front panel for more than 5 seconds with no disc in the product. All settings will revert to their factory settings. No HDMI output. • Check the connection between the TV and the HDMI jack of the product. • Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution. Abnormal HDMI output appears on the screen.
Appendix Specifications General FM Tuner Weight 4.19 Ibs Dimensions 16.9 (W) x 2.1 (H) x 8.8 (D) inches Operating Temperature Range +41°F to +95°F Operating Humidity Range 10 % to 75 % Signal/noise ratio 55 dB Usable sensitivity 12 dB Total harmonic distortion 1.
HT-H5500W 3.7 x 5.8 x 2.9 3.7 x 4.6 x 2.9 Dimensions (W x H x D) (Unit : inch) 8.9 x 3.7 x 2.9 6.6 x 13.8 x 11.4 HT-H5530 3.7 x 43.8 x 2.9 (Stand base: 10.9 x 0.9 x 7.4) 3.7 x 4.6 x 2.9 0.96 0.88 6.49 0.88 8.9 x 3.7 x 2.9 6.6 x 13.8 x 11.4 HT-H5500W 1.24 7.52 Weights (Unit : Ibs) HT-H5530 ✎ ✎ ✎ ✎ 1.24 7.52 Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate.
Appendix Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTSHD, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS-HD Master Audio | Essential is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
HEADQUARTERS Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada TEL: 1-800-SAMSUNG (1-800-726-7864) www.samsung.com/ca/support Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contact Center Area Web Site ` North America CANADA 1-800-SAMSUNG (726-7864) U.S.A 1-800-SAMSUNG (726-7864) HT-H5500W_30_ZC-0416.indd 50 www.samsung.com/ca/support (English) www.samsung.
HT-H5500W HT-H5530 Technoloisir Blu-ray™ 5,1 canaux Guide d’utilisation imaginez les possibilités Merci d'avoir acheté ce produit Samsung. Pour obtenir notre service complet, veuillez enregistrer votre produit sur www.samsung.com/register HT-H5500W_30_ZC_FRA-0417.
Information relative à la sécurité Ce symbole indique la présence d’une tension dangereuse à l’intérieur. Il est dangereux de toucher les pièces internes de ce produit. ATTENTION RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR. ATTENTION: POUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE RETIREZ JAMAIS LE CAPOT (NI L’ARRIÈRE). CE PRODUIT NE CONTIENT PAS DE PIÈCES RÉPARABLES PAR L’UTILISATEUR. CONFIEZ TOUTE RÉPARATION À DU PERSONNEL QUALIFIÉ.
ATTENTION : • PEUT ÉMETTRE UN RAYONNEMENT LASER VISIBLE OU INVISIBLE DE CLASSE B SI LE COUVERCLE EST OUVERT. ÉVITEZ UNE EXPOSITION AUX RAYONS (IEC 60825-1) • CET APPAREIL UTILISE UN LASER. EFFECTUER DES CONTROLES OU DES REGLAGES OU BIEN EXECUTER DES PROCEDURES AUTRES QUE CELLES SPECIFIEES DANS CE MANUEL PEUT PROVOQUER UNE EXPOSITION A UN RAYONNEMENT DANGEREUX. N'OUVREZ PAS LE COUVERCLE. NE RÉPAREZ PAS LE PRODUIT PAR VOUS-MÊME. VEUILLEZ CONTACTER UN TECHNICIEN QUALIFIÉ POUR TOUTE RÉPARATION.
Information relative à la sécurité 12. Utilisez uniquement le chariot, le socle, le trépied, le support ou la table recommandés par le fabricant ou vendus avec l’appareil. Si l’équipement est placé sur un meuble à roulettes, déplacez ce meuble avec précaution, afin d’éviter les blessures que pourrait entraîner le basculement de l’appareil. 13. Débranchez cet appareil en cas d'orage ou si vous ne l’utilisez pas pendant une période prolongée. 14. Confiez toute réparation à du personnel qualifié.
Table des matières POUR DÉMARRER SERVICES RÉSEAU Accessoires 34 Utilisation de BD-LIVE™ 6 Composants des enceintes 34 Utilisation de la fonction DLNA 7 Face avant 34 Applications 7 Face arrière 35 Utilisation de Opera TV Store 8 Télécommande 36 Screen Mirroring 9 Connexion des enceintes CONNEXIONS Table des matières 6 ANNEXE 37 Information complémentaire 12 Fixation du noyau torique en ferrite au cordon électrique du module récepteur sans fil (SWA6000) 13 Branchement à un téléviseur et
Pour démarrer Vérification du contenu de la boîte pour vous assurer de la présence des accessoires et des composants d’enceinte énumérés ou illustrés ci-dessous.
Face avant ICÔNES D’AFFICHAGE ARRÊT LECTURE/PAUSE OUVRIR/ FERMER COMMANDES DU VOLUME MARCHE/ARRÊT Pour démarrer FONCTION AFFICHAGE 5V 0.5A TIROIR DISQUE ✎ ✎ ✎ ✎ DÉTECTEUR DE TÉLÉCOMMANDE USB Veillez à ce que les enfants ne touchent pas à la surface du produit lorsque le téléviseur est allumé. Il sera chaud. Pour mettre à jour le logiciel du produit par la prise USB, vous devez utiliser une clé USB.
Pour démarrer Télécommande Aperçu de la télécommande Pour allumer et éteindre le produit. FUNCTION VOLUME Pour régler le volume. MUTE - + 1 2 3 4 5 6 7 8 Appuyez sur cette touche pour sélectionner le mode Cinéma maison. (BD/DVD, D. IN, AUX, etc.). Pour ouvrir et fermer le tiroir disque. Pour couper le son provisoirement. Appuyez sur les touches numériques pour exécuter les options. Pour accéder au menu disque. Pour effectuer un saut vers l’avant ou vers l’arrière.
Connexions Cette section couvre différentes méthodes pour connecter le produit à d’autres périphériques. Avant de déplacer ou d’installer le produit, assurez-vous de couper l’alimentation et de débrancher le cordon d'alimentation.
Connexions Installation des enceintes sur le socle Tallboy * HT-H5530 seulement – Enceintes avant 1. 2. Tournez le pied à l’envers et fixez-le au socle. Utilisez le tournevis pour insérer les vis dans les trois orifices marqués. 1 Base du pied 2 Pied 3. 4. Redressez un fil à enceinte fourni en direction de la gravité et introduisez-le dans l’orifice au centre du pied du socle. Branchez l’enceinte supérieure au socle assemblé. 3 4 Enceinte Pied 5. 6.
* HT-H5500W Enceinte avant (G) Enceinte centrale Caisson des basses Enceinte avant (D) Enceinte ambiophonique (D) Connexions Enceinte ambiophonique (G) Module récepteur sans fil * Ce produit devrait être uniquement connecté au SWA-6000.
Connexions ✎ Si le produit n’établit pas la connexion sans fil, vous devrez exécuter une ID définie entre le produit et le module récepteur sans fil. Le produit étant éteint, appuyez sur les touches « 0 » « 1 » « 3 » « 5 » de la télécommande. Allumez le module du récepteur sans fil. Appuyez ensuite sur la touche « ID SET » située à l’arrière du module du récepteur sans fil pendant 5 secondes, puis allumez le produit.
Branchement à un téléviseur et à des périphériques externes Rouge W Blanc Méthode 1 Périphériques Connexions R Méthode 2 AUDIO OUT OPTICAL OUT HDMI IN Connexion à un téléviseur Branchez un câble HDMI (non fourni) de la prise HDMI OUT située à l’arrière du produit à la prise HDMI IN de votre téléviseur. Si le téléviseur prend en charge la fonction ARC, le raccordement de ce câble permet la restitution des signaux audio du téléviseur par les enceintes du cinéma.
Connexions Réseau sans fil Connexion à un routeur réseau Vous pouvez connecter votre produit à votre réseau selon l'une des méthodes illustrées ci-après. Réseau câblé Point d'accès sans fil Modem à large bande (avec routeur intégré) Service à large bande Service à large bande Ou ✎ Routeur Service à large bande Modem à large bande ✎ ✎ ✎ ✎ ✎ Votre routeur ou les politiques du fournisseur de service Internet peuvent empêcher le produit d’accéder au serveur de mise à jour du logiciel Samsung.
Définition des Paramètres 4:3 plein écran - Pour les anciens téléviseurs analogiques à écran standard. Affiche les images 4:3 en format plein écran et les images 16:9 en format pan-scan qui remplit l’écran, mais coupe l’image sur la droite et sur la gauche et élargit le centre verticalement. Procédure relative aux paramètres • Le menu Accueil ne s’affiche pas si vous ne définissez pas les paramètres initiaux.
Définition des Paramètres Aperçu de l’écran d'accueil 1 8 Fonction 2 Lecture Photos Vidéos Musique Utilisez pour passer à un périphérique externe, pour utiliser la radio et pour changer de mode par une connexion Bluetooth. Vous pouvez utiliser la touche FUNCTION et la touche du boîtier principal pour changer de mode. 9 Paramètres Définissez toute une variété de fonctions adaptées à vos préférences personnelles.
Touches de la commande utilisées pour le menu Paramètres SUBTITLE HOME Fonctions du menu Paramètres Affichage REPEAT Réglages 3D 1 TOOLS INFO RETURN EXIT 3 2 4 TUNER Touche HOME : Pour accéder au menu Accueil. 2 Touche RETURN : Pour revenir au menu précédent. 3 Touche E (ENTRER) / DIRECTION : • Appuyez sur les touches ▲▼◄► pour déplacer le curseur ou sélectionner un élément du menu. • Appuyez sur la touche E pour activer l’élément actuellement sélectionné ou confirmer un paramètre.
Définition des Paramètres Couleurs profondes HDMI Réglage de la plage dynamique Vous permet de définir le produit de façon à diffuser la vidéo avec des couleurs profondes depuis la prise de sortie HDMI OUT. Le mode Couleurs profondes reproduit les couleurs plus précisément et selon une plus grande intensité. Règle la compression dynamique pour les formats audio Dolby Digital, Dolby Digital Plus et Dolby TrueHD.
Langue Screen Mirroring La fonction Screen Mirroring de l’écran vous permet d’afficher l’écran de votre téléphone intelligent ou de votre appareil intelligent sur votre téléviseur branché au système de cinéma maison. (Voir la page 36) Vous pouvez sélectionner votre langue préférée pour les options Menu à l'écran, le menu du disque, etc. • La langue sélectionnée ne s’affiche que lorsqu’elle est prise en charge par le disque.
Définition des Paramètres Configuration du réseau Paramètres réseau Echec de la connexion au réseau câblé. Lorsque vous connectez ce produit à un réseau, vous pouvez utiliser les applications et les fonctions basées sur le réseau, telles que BD-LIVE, pour mettre à jour les logiciels du produit via la connexion réseau. Configuration de votre connexion réseau Pour configurer la connexion réseau, suivez ces étapes : 1. Adresse MAC XX:XX:XX:XX:XX:XX Adresse IP 0. 0. 0. 0 Masque s.-réseau 0. 0. 0.
Sans fil - Automatique 4. Suivez les étapes 1 à 3 sous « Configuration de votre connexion réseau ». (Voir la page 20) 1. Dans l’écran Paramètres réseau, remplacez Type de réseau par Sans fil. Le produit cherche, puis affiche une liste de réseaux disponibles. Paramètres réseau Sélectionnez le type de réseau Type de réseau Sans fil Réseau sans fil 㾎 si-ap KIMING_VTOWER WPS(PBC) Recherche m Déplacer " Sélectionner ' Retour 2. Sélectionnez le réseau souhaité, puis appuyez sur la touche E. 3.
Définition des Paramètres ✎ Vous pouvez obtenir les valeurs du paramètre du réseau de votre fournisseur de services Internet. 11. Ensuite, sélectionnez Retour ('), puis appuyez sur la touche E. L’écran Clé sécurité apparaît. 12. Sur l’écran Clé sécurité, saisissez le code de sécurité ou la phrase de passe du réseau. Saisissez les chiffres directement à l’aide des touches numériques de votre télécommande. Saisissez les lettres une à une à l’aide des touches ▲▼◄►, et en appuyant sur la touche E. 13.
2. 3. Lorsque vous avez terminé la procédure, vous devriez voir une fenêtre en incrustation apparaître sur votre téléviseur, vous indiquant qu’un appareil prenant en charge Wi-Fi Direct a demandé à se connecter. Sélectionnez OK, puis appuyez sur la touche E pour accepter. La fenêtre en incrustation de connexion apparaît, suivie par la fenêtre en incrustation Connecté. Lorsque celle-ci se ferme, l’appareil cité à l’écran Wi-Fi Direct devrait apparaître comme connecté.
Définition des Paramètres 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. ✎ ✎ À l’aide du bouton de gauche de la souris, cliquez sur le numéro de modèle du produit dans la liste déroulante. Sur la page qui s’affiche, déroulez le menu, puis cliquez sur Firmware Manuals & Downloads. Cliquez sur Firmware au centre de la page. Cliquez sur l’icône ZIP dans la colonne Fichier située sur le côté droit de la page. Dans la première fenêtre contextuelle qui s’affiche, cliquez sur Send.
Lecture de Contenu Votre cinéma maison peut lire des contenus sur des disques Blu-ray/DVD/CD, des périphériques USB, des ordinateurs, des téléphones intelligents, des tablettes et des applications. Pour lire du contenu stocké sur votre ordinateur ou un appareil mobile, vous devez brancher l’ordinateur ou l'appareil mobile et le produit à votre réseau.
Lecture de Contenu 3. Un écran s'affiche énumérant le contenu du disque. Selon la disposition des contenus, vous verrez soit des dossiers, des fichiers individuels ou les deux. 4. Au besoin, utilisez les touches ▲▼◄► pour sélectionner un dossier, puis appuyez sur la touche E. 5. Utilisez les touches ▲▼◄► pour sélectionner un fichier pour l’afficher ou le lire, puis appuyez sur la touche E. 6.
Commande de la lecture des vidéos Vous pouvez contrôler la lecture du contenu vidéo situé sur un disque Blu-ray/DVD, un périphérique USB, un appareil mobile ou un ordinateur. Selon le disque ou les contenus, certaines des fonctions décrites dans ce guide pourraient ne pas être disponibles.
Lecture de Contenu Utilisation du menu Outils Sous-titre Pendant la lecture, appuyez sur la touche TOOLS. Titre Si un disque ou un périphérique contient plus d’un titre, cette option vous permet d'atteindre ou de sélectionner un titre désiré. Temps de lecture Cette option vous permet d’atteindre un point de lecture spécifique. Utilisez les touches numériques pour saisir le point de lecture. Mode de répétition Vous permet de sélectionner la langue de soustitrage souhaitée.
Pl li Playlist Mode de répétition 4 Lecture accélérée (CD audio [CD-DA]) uniquement : Pendant la lecture, appuyez sur la touche 3 ou . Chaque fois que vous appuyez sur la touche 3 ou , la vitesse de lecture change. 5 Touche 7 : Interrompt la lecture d'une piste. 6 Touche 6 : Lit la piste musicale actuellement sélectionnée. 0/16 Outils TRACK 001 Piste Ext > Déplacer < Régler ' Retour TRACK 003 04:41 TRACK 004 04:02 TRACK 005 03:43 TRACK 006 03:40 00:00/00:00 " Pause CD 2.
Lecture de Contenu 4. Pour retirer un fichier de la Liste d'écoute, accédez au fichier concerné, puis appuyez sur la touche JAUNE (C). 5. Appuyez sur la touche E pour lire les fichiers sélectionnés. L'écran Liste d'écoute apparaît. 6. Pour accéder à la Liste des fichiers musicaux, appuyez sur la touche 5 ou RETURN. 7. Pour revenir à la Liste d'écoute, appuyez sur la touche E. ✎ ✎ Vous pouvez créer une liste d'écoute contenant jusqu'à 99 pistes sur des CD audio (CD-DA).
✎ ✎ Selon le disque ou le périphérique de stockage, le menu Outils pourrait différer. Toutes les options pourraient ne pas s'afficher. Pour pouvoir activer la fonction Fond musical, le fichier de photos doit se trouver dans la même unité de stockage que le fichier de musique. La qualité sonore pourrait toutefois être atténuée par le débit binaire du fichier MP3, la taille de la photo et la méthode d'encodage.
Lecture de Contenu • Le cinéma maison dispose d’une portée de réception effective allant jusqu’à 10 mètres (32,8 pieds) dans toutes les directions s’il n’y a aucun obstacle. La connexion sera automatiquement coupée si le dispositif est hors de portée. Même à l’intérieur de cette portée, la qualité du son peut être détériorée par des obstacles comme des murs et des portes. • Ce périphérique sans fil peut causer de l’interférence électrique lors de son fonctionnement.
Utilisation de la fonction de mise sous tension de l'appareil 1) Si vous souhaitez restituer les signaux audio de votre téléviseur par les enceintes de votre cinéma maison. 2) Si vous souhaitez restituer les signaux audio provenant d’un périphérique USB branché au téléviseur par les enceintes de votre cinéma maison. Lorsque le cinéma maison est éteint, le branchement de votre appareil intelligent au produit par une connexion Bluetooth peut mettre le cinéma maison en fonction. ✎ 2.
Services Réseau 3. Utilisation de BD-LIVE™ 4. 1. 2. Connecter le produit au réseau. (Voir la page 14) 5. Configurer les paramètres réseau. (Voir page 20 à 22.) 6. Après avoir connecté le produit au réseau, vous pouvez apprécier plusieurs contenus de services cinématographiques offerts sur des disques compatibles avec la technologie BD-LIVE. 1. Insérez une clé USB dans la prise USB située à l’avant du produit et vérifiez l'espace mémoire disponible via la commande Gestion données Blu-ray.
Utilisation des applications Utilisation de Opera TV Store La première fois que vous accéderez à une des applications, le cinéma maison affiche deux ententes. Vous devez accepter les deux ententes pour télécharger et utiliser une ou plusieurs applications. Par défaut, le cinéma maison affiche quatre applications populaires sur l’écran d’accueil.
Services Réseau 4. Répétez ce processus pour supprimer d’autres applications. 5. Une fois terminé, sélectionnez FAIT, puis appuyez sur la touche E. 6. Appuyez sur la touche RETURN pour retourner à l'écran principal. • Les transmissions Bluetooth peuvent interférer avec le signal Screen Mirroring. Avant d’utiliser la fonction Screen Mirroring, nous vous recommandons fortement de désactiver la fonction Bluetooth de votre téléphone intelligent ou de votre périphérique intelligent.
Annexe Information complémentaire Sortie numérique Remarque Connexions SORTIE HDMI • Selon votre téléviseur, certaines résolutions de sortie HDMI pourraient être incompatibles. • Vous devez avoir une connexion HDMI pour visionner les vidéos en 3D. • Un câble HDMI qui est trop long pourrait entraîner du bruit à l’écran. Si c’est le cas, réglez la fonction Couleurs profondes HDMI en la réglant à Désactiver dans le menu.
Annexe Audio HDMI Lecture de Contenu • Lorsque la sortie audio HDMI est produite par l’enceinte du téléviseur, elle est automatiquement sous-échantillonnée à 2 canaux. Canal retour audio • Lorsque la fonction Anynet+ (HDMI-CEC) est Désactiver, la fonction Canal retour audio n’est pas disponible. • L’utilisation d’un câble HDMI non certifié pour utiliser la fonction ARC (canal retour audio) pourrait entraîner un problème de compatibilité.
✎ ✎ ✎ Votre produit ne lira pas le contenu enregistré sur un disque BD-R ou sur un périphérique USB à un débit binaire de plus de 30 Mbit/s. Il se peut que certains disques ne puissent pas être lus, notamment lorsque des fonctions spécifiques, comme le changement d’angle et le réglage du format d’image, sont activées. De l'information détaillée sur les disques figure sur l’emballage du disque. Veuillez vous y reporter au besoin.
Annexe 1 États-Unis, territoires américains et Canada 2 Europe, Japon, Moyen Orient, Égypte, Afrique et Groenland. 3 Taiwan, Corée, Philippines, Indonésie et Hong Kong. 4 Mexique, Amérique du Sud, Amérique Centrale, Australie, Nouvelle Zélande, Îles du Pacifique et Caraïbes. 5 Russie, Europe de l'Est, Inde, Corée du Nord et Mongolie. 6 Chine. ✎ ✎ ✎ Il se pourrait que certains disques de format AVCHD ne puissent pas être lus en raison des conditions d'enregistrement.
Fichiers vidéo pris en charge Extension de fichier Conteneur Codec vidéo Codec audio *.avi AVI MP4v3 H.264 BP/MP/HP MP3, Dolby Digital, DTS, WMA, PCM *.mkv MKV VC-1 AP H.264 BP/MP/HP MP3, Dolby Digital, DTS *.wmv WMV (wmv9) VC-1 AP VC-1 SM WMA *.mp4 MP4 MP4 (mp4v) H.264 BP/MP/HP AAC *.mpg / *.mpeg PS MPEG1 MPEG2 H.
Annexe Sélection de la sortie numérique Configuration Train de bits (non traité) PCM Connexion Flux de données audio sur disque Bluray Flux de données audio sur DVD Définition pour disque Blu-ray Train de bits (Dolby D réencodé) Récepteur A/V HDMI PCM Jusqu’à 7,1 canaux PCM PCM Dolby Digital Jusqu’à 5,1 canaux PCM Dolby Digital Dolby Digital Plus Jusqu’à 5,1 canaux PCM Dolby Digital Plus Dolby TrueHD Jusqu’à 5,1 canaux PCM Dolby TrueHD DTS Jusqu’à 5,1 canaux PCM DTS Audio DTS-HD Hau
Résolution en fonction du mode de sortie Lecture de contenus de disques Blu-ray/e-Content/Numérique Sortie Configuration BD Wise Lecture de DVD Mode HDMI Contenu e-Content/ Numérique Mode HDMI Disque Blu-ray Résolution de disque Blu-ray 1080p à 60 ips 480i Auto Résolution max. de l'entrée du téléviseur 1080p à 60 ips 1080p à 60 ips Résolution max.
Annexe Symptôme Vérification/Résolution La télécommande ne fonctionne pas. • Utilisez-vous la télécommande dans les limites de la distance opérationnelle et dans l’angle approprié par rapport au capteur? • Les piles sont-elles épuisées? • Avez-vous correctement sélectionné les fonctions de mode (TV/BD) de la télécommande (TV ou BD)? • Le disque tourne, mais aucune image ne s’affiche. • La qualité de l’image est mauvaise et l’image tremble.
Symptôme Vérification/Résolution Si la sortie HDMI est définie à une résolution que votre téléviseur ne peut pas prendre en charge (par exemple 1080p), il se peut qu'aucune image n'apparaisse à l'écran. • Appuyez sur la touche 5 située sur le panneau avant et maintenez-la enfoncée pendant plus de 5 secondes, en ayant préalablement vérifié qu'aucun disque n'est inséré dans le tiroir. Tous les paramètres reviennent aux valeurs par défaut définies à l’usine.
Annexe Caractéristiques techniques Général Poids 4,19 Ibs Dimensions 16,9 (L) x 2,1 (H) x 8,8 (P) po Plage de températures d’utilisation +41 °F à +95 °F Plage de taux d’humidité 10 % à 75 % d’utilisation Rapport signal/bruit Syntoniseur Sensibilité utilisable FM Distorsion harmonique totale Vidéo 55 dB 12 dB 1,0 % 1080p, 1080i, 720p, 480p HDMI Audio Audio PCM multicanal, audio Bitstream, audio PCM Sortie enceinte avant 165W x 2 (3 ) Sortie enceinte centrale 170W (3 ) Sortie enceinte ambiopho
HT-H5500W 3,7 x 5,8 x 2,9 3,7 x 4,6 x 2,9 Dimensions (L x H x P) (Unité : po) 8,9 x 3,7 x 2,9 6,6 x 13,8 x 11,4 HT-H5530 3,7 x 43,8 x 2,9 (Base du pied: 10,9 x 0,9 x 7,4) 3,7 x 4,6 x 2,9 0,96 0,88 6,49 0,88 8,9 x 3,7 x 2,9 6,6 x 13,8 x 11,4 HT-H5500W 1,24 7,52 Poids (Unité : lbs) HT-H5530 ✎ ✎ ✎ ✎ 1,24 7,52 Samsung Electronics Co., Ltd se réserve le droit de changer les spécifications sans préavis. Les poids et les dimensions sont approximatifs.
Annexe Licence Fabriqué sous licence concédée par Dolby Laboratories. Dolby et le symbole du double-D sont des marques de commerce de Dolby Laboratories. Pour les brevets DTS, voir http://patents.dts.com. Fabriqué sous licence de DTS Licensing Limited. DTS, DTS-HD, le Symbole, DTS et le Symbole ensemble sont des marques déposées et DTS-HD Master Audio | Essential est une marque de commerce de DTS, Inc. © DTS, Inc Tous droits réservés.
GARANTIE LIMITÉE DE L’ACHETEUR INITIAL Samsung Electronics Canada Inc. (SECA) garantit ce produit contre les vices de matériau(x) et de fabrication. Si l'appareil ne fonctionne pas convenablement durant la période de garantie et que son mauvais fonctionnement est dû à un défaut de matériau(x) ou de fabrication, SECA réparera ou remplacera, à sa seule discrétion, l'appareil défectueux. Toutes les réparations sous garantie doivent être effectuées par un centre de service autorisé SECA.
SIÈGE SOCIAL Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada TEL: 1-800-SAMSUNG (1-800-726-7864) www.samsung.com/ca_fr/support Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Contact Center Area Web Site ` North America CANADA 1-800-SAMSUNG (726-7864) U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.