HT-H6500WM HT-H6530WM 5.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
Safety Information This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. • The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
WARNING : • TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. NOTE TO CATV SYSTEM INSTALLER This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
Safety Information 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
Contents GETTING STARTED NETWORK SERVICES Accessories 41 Logging In to Your Samsung Account 6 Speaker Components 41 Adding a Credit Card 7 Front Panel 7 Rear Panel 41 Before Using MOVIES & TV SHOWS or SAMSUNG APPS 8 Remote Control 42 Using MOVIES & TV SHOWS 43 Using SAMSUNG APPS CONNECTIONS 9 45 Screen Mirroring Connecting the Speakers 45 Using the Web Browser 11 Attaching the Toroidal Ferrite Core to the Power Cord of the Wireless Receiver Module (SWA6000) 12 Connecting to a TV and Exter
Getting Started Check the box for the accessories and speaker components listed or shown below. Accessories • Remote Control • Lithium Battery • User Manual (For Power cord) Power Cable Toroidal Ferrite Core FM Antenna Soft Cloth WARNING, DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD, [The remote control supplied with] This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Front Panel DISPLAY ICONS STOP PLAY/PAUSE OPEN/ CLOSE VOLUME CONTROL POWER Getting Started FUNCTION DISPLAY 5V 0.5A DISC TRAY ✎ ✎ ✎ ✎ REMOTE CONTROL SENSOR USB When the product is on, do not let children touch the product's surface. It will be hot. To upgrade the product's software through the USB jack, you must use a USB flash drive. When the product displays a Blu-ray Disc menu, you cannot start the movie by pressing the /p button on the product or the remote.
Getting Started Remote Control Tour of the Remote Control Press to open and close the disc tray. Turn the product on and off. Press to select the Home Theater's mode (HDMI, AUX, BD/DVD, etc.). Adjust the volume. Press to skip backwards([) or forwards(]) or Press and hold to search backwards(() or forwards()). Cut off the sound temporarily. Press to play disc or files. or Press to pause playing. Press to use the Tools menu.
Connections This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Center Product Front (R) Surround (R) Front (L) Surround (L) Wireless Receiver Module Front Speakers Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Connections Installing the Speakers on the Tallboy Stands * HT-H6530WM only - Front Speakers 1. Find the speaker cable that is attached to the Stand. Turn the Stand and Stand Base upside-down, unravel the speaker cable, and then draw it through the hole in the Stand Base. ✎ Handle the Stand carefully. It is heavy. Connect the Stand Base to the bottom of the Stand. 3. Insert three 5x20 screws into the marked holes in the Stand Base, and then tighten them with a screwdriver as shown in the illustration.
✎ ✎ ✎ ✎ Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound from the speakers may be disrupted because of interference. If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.
Connections Connecting to a TV and External Devices AUX IN AUX IN FM ANT FM ANT SPEAKERS OUT FRONT R SUBWOOFER FRONT L CENTER IMPEDANCE : 3 POWER LAN L R OPTICAL DIGITAL AUDIO IN HDMI OUT HDMI IN LAN L R Red W White OPTICAL R Method 1 External Devices DIGITAL AUDIO IN Method 2 AUDIO OUT HDMI OUT HDMI IN Method 3 OPTICAL OUT HDMI OUT HDMI IN Connecting to a TV Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on y
Connecting to a Network Router Wireless Network You can connect your product to your network router using one of the methods illustrated below.
Settings The Initial Settings Procedure 2 MOVIES & TV SHOWS Download movies and TV Shows from the Internet. • The Home menu will not appear if you do not configure the initial settings. • The OSD (On Screen Display) may change in this product after you upgrade the software version. • The access steps may differ depending on the menu you selected. After you have finished connecting the home theater to your TV, turn on the TV, and then turn on the home theater. The first initial setup screen appears.
Detailed Function Information Accessing the Settings Screen 1. Select Settings on the Home screen, and then press OK. The Settings screen appears. Settings Picture Picture Sound Network Smart Hub System Support 3D Settings TV Aspect Ratio 16:9 Original BD Wise Off Resolution Auto Movie Frame (24Fs) Auto DVD 24Fs Conversion Off Fit Screen Size Size 3 Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the ,.
Settings Movie Frame (24Fs) Speaker Settings Setting the Movie Frame (24Fs) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality if attached to a 24Fs compatible TV. • You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. • Movie Frame is only available when the product is in the HDMI 1080p output resolution modes.
4. A 6-step test will start. During each stage, the TV will sound a test tone at a different frequency. The tone will begin softly and increase in volume. Select Yes when you can hear the test tone. If you want to listen to it again, select Retry. Each time you select Yes, the TV will move on to the next tone. Once the test is complete, a screen appears that lets you compare the original sound to the calibrated sound. Select Next, and then press the OK button to continue.
Settings Network Smart Hub Network Status Apps Settings Lets you check the current network and Internet status. You can edit the settings for using Apps. Push Notification Settings : Receive notifications from selected services. Network Settings Lets you configure the network connection so you can enjoy various features such as Internet services or AllShare Wi-Fi functionality, and perform software upgrades.
Security System Setup Lets you re-run the Initial Settings procedure. Refer to the descriptions displayed on the screen. Quick Start Lets you set the player to turn on quickly by decreasing the boot time. ✎ If this function is set to On, Standby power consumption will increase. (About 12W ~ 20W) Lets you select the language you prefer for the onscreen menu, disc menu, audio, subtitles, etc.
Settings Network Setup To use an Anynet+ (HDMI-CEC) function, follow the instructions below. 1) Connect the product to an Anynet+ (HDMICEC)-compliant Samsung TV using HDMI Cable. 2) Set the Anynet+ (HDMI-CEC) feature to On in both the TV and the product. 3) Search for and then select the product in the TV's Anynet+ (HDMI-CEC) list. For more exact instructions, see the Anynet+ section of the TV's user's manual.
✎ Wired - Manual If you have a static IP address or the automatic procedure does not work, you'll need to set the Network Settings values manually. After following Steps 1 to 3 above: 1. ✎ 7. In the Network Settings screen, change Network type to Wired. Then, select Connect and press the OK button. The product searches for a network, and then displays the connection failed message.
Settings ✎ You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem. Wireless - Manual If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. After following Steps 1 to 3 in "Configuring Your Network Connection" on page 20: 1. In the Network Settings screen, change Network type to Wireless.
2. Scroll the list down, select WPS(PBC), and then press the OK button. 3. Press the WPS(PBC) button on your router within two minutes. Your product automatically acquires all the network settings values it needs and connects to your network after the network connection is verified. 4. ✎ When it is done, highlight OK, and then press the OK button. For a WPS connection, set your wireless router’s security encryption to AES. WEP security encryption does not support a WPS connection. 5.
Settings ✎ Text files, such as files with a .TXT or .DOC extension, will not display when you are using the Wi-Fi Direct function. 3. If it does not find an update, the "There are no new updates for you at the moment." pop-up appears. Press the OK button to exit. If it finds a new version, the Update Request pop-up appears. Select OK. The product upgrades the software, turns off, and then turns on automatically. If you do not select OK or Cancel in one minute, the product stores the new upgrade software.
Update by USB Visit www.samsung.com. 2. Click SUPPORT on the top right of the page. 3. Enter the product's model number into the search field. As you enter the model number, a drop down will display products that match the model number. 4. Left click your product's model number in the drop down list. 5. On the page that appears, scroll down to and then click Firmware Manuals & Downloads. 6. Click Firmware in the center of the page. 7.
Playing Content Your home theater can play content located on Bluray/DVD/CD discs, USB devices, PCs, smart phones, tablets, and on the Web. To play content located on your PC or a mobile device, you must connect the PC or mobile device and the product to your network. To play content on your PC, you must also download and install AllShare network software or already have DLNA network software on your PC. ✎ PCs running Windows 7 and Windows 8 have DLNA software (Play To) built in.
Playing Files on a Storage Device 4. Select a file to view or play, and then press the OK button. Method 1 : If the product is turned on after you 5. Press the ' (RETURN) button to exit a folder or the e (EXIT) button to return to the Home screen. 6. Go to pages 28~39 for instructions that explain how to control playback of videos, music, and pictures on a storage device. connect a storage device 1. Turn the product on. 2. Follow the directions in “Playing Multimedia Files” on page 26.
Playing Content 5. Select a file to view or play, and then press the OK button. 7. Press the ' (RETURN) button to exit a folder or the e (EXIT) button to return to the Home screen. 6. Press the ' (RETURN) button to exit a folder or the e (EXIT) button to return to the Home screen. 8. 7. Go to pages 28~39 for instructions that explain how to control playback of videos, music, and pictures on a storage device.
p e (EXIT) Starts/Pauses playback. Select Scene Stops playback. You can use the Select Scene function during playback to view or start a movie from the scene of your choice. During playback, press and hold the [ or ] button. Each time you press and hold the [ or ] button, the playback speed will change. Slow Motion Play In pause mode, press and hold the ] button. Each time you press and hold the ] button, the playback speed will change. Skip Motion Play During playback, press the [ or ] button.
Playing Content Repeat Mode Audio Lets you repeat a title, chapter, or specific section. - Off : Select to return to normal playback. - Title : Choose to repeat a selected title. - Chapter : Choose to repeat a specific chapter. - Repeat A-B : Choose to repeat a specific section. Select to set the desired audio language. 1. Press the OK button at the point where you want repeat play to start (A). 2. Press the OK button at the point where you want repeat play to stop (B).
Using the Sort By & Options Menus Controlling Music Playback Select the Filter( ) function, and then Videos to display videos only. ✎ Even though the product will display folders that contain all content types, it will only display files of the content type you selected For example, if you selected Videos, you will only be able to see video files. On the screen that lists the video files, use the ,. buttons to select Sort By or Options in the upper right, and then press the OK button.
Playing Content Music Screen Controls TRACK 001 TRACK 001 00:00/00:00 Advance the track. 00:43 TRACK 002 03:56 TRACK 003 04:41 TRACK 004 04:02 TRACK 005 03:43 TRACK 006 03:40 TRACK 007 04:06 TRACK 008 03:52 TRACK 009 03:04 TRACK 010 04:02 The Track List screen appears initially, and the first track begins to play. If you are playing a commercially recorded disk and don't press a button on the remote momentarily, the Playback screen appears.
Repeating Tracks on an Audio CD Music You can set the product to repeat tracks on an audio CD (CD-DA/MP3). Sort By Play Selected Play Selected lets you select specific files to play. It works essentially the same way for all media. See "Using Play Selected with a Commercial CD" on page 34 and "Using Play Selected with Self-Recorded Media (CDs, USB Devices, etc.) on page 34. Send Select Send to upload selected files to on-line sites (Picasa, Facebook, etc.) or to devices.
Playing Content - Use Deselect All to deselect all selected tracks at once. Then, select individual tracks or use Select All to select all the tracks, and then press the ' (RETURN) button on your remote or select Play and then press the OK button. If you do not use Select All or select individual tracks, the Play Selected list will not change. Shuffling Tracks on an Audio CD You can set the product to play tracks on an audio CD (CD-DA/MP3) at random. 1. 2. buttons to During playback, use the ,.
Using Play Selected Starting from the Home Screen ✎ Select PLAY DISC or MULTIMEDIA depending on the media you are using. - If you selected PLAY DISC, the Track List screen appears. Use the Filter( ) function to select Music, and then follow the directions starting at Step 3 above. - If you selected MULTIMEDIA, select Storage or Network Device on the MULTIMEDIA screen. Then, select your storage media on the Storage screen or device on the Network Device screen. The File List screen appears.
Playing Content Ripping Using Bluetooth 1. Insert a USB device into the USB jack on the front of the product. This is the device you will rip the files to. 2. Put a music CD into the home theater. In a few moments, the Track List screen appears. 3. On the Track List screen, select Settings( ) on the lower left of the screen, and then press the OK button. The Settings menu appears. 4. Use the ,. buttons to select Ripping, and then press the OK button. The Ripping screen appears. 5. Use the ,.
To connect the Home Theater to a Bluetooth ✎ device The search or connection functions may not work properly in the following cases: - If there a strong electric field near or around the home theater. - If several Bluetooth devices are simultaneously paired with product. Connect - If the Bluetooth device is turned off, not in place, or malfunctions.
Playing Content ✎ In Bluetooth mode, the screen saver will start if the Bluetooth device stays in the Ready state for 5 minutes. To reconnect the Bluetooth device, turn off the screen saver, and then connect the device. To turn off the screen saver, press any button on the remote control (the Volume button, buttons, etc.) an ,. Using Bluetooth Power On When the home theater is turned off, connecting a previously connected smart device to the product via a Bluetooth connection can turn the home theater on.
Using the Sort By and Options Menus When the Photo File List is Displayed Using the Send Function Use the ,. buttons to select Send, and then press the OK button. The Selection screen appears. 2. Use the ,. buttons to select a picture, and then press the OK button. A check appears to the left of the picture. 3. Repeat Step 2 to select and check additional pictures. 4. To remove a picture from the list, move to the picture, and then press the OK button again. The check on the picture is removed. 5.
Playing Content Setting Mono/Stereo Press the ST/MO button. • Each time you press the button, the sound switches between STEREO and MONO. • In a poor reception area, select MONO for a clear, interference-free broadcast. Presetting Stations 1. Press the SOURCE button to select FM. 2. Press the ,. buttons to select <89.10>. 3. Press the MEMORY button. • NUMBER flashes on the display. Press the MEMORY button again. • Press the MEMORY button before NUMBER disappears from the display on its own.
Network Services You can enjoy various network services such as streaming video or on-line apps by connecting the product to your network. ✎ If you press the button after you have logged in, the Sign In screen appears. You can select Link Accounts, Edit Profile, Remove Account, and Sign Out. To use network services, you must first: 1. Connect the product to a network. (See page 13) 2. Configure the network settings.
Network Services 4. On the Additional Services and Choices screen, you must review and agree to both the Smart Hub Terms and Conditions and the Privacy Policy to use Smart Hub. 5. Scroll down, and then click the View details buttons to review the full documents. ✎ You do not need to consent to the Supplemental Privacy Notice, but one or more Smart TV features or functionalities may not be available if you do not. 6. Select I agree to all, and then press the OK button. The Setup Complete screen appears.
✎ ✎ On the each movie or show information screen, the Watch Now button is displayed only after you have download one of the video streaming apps you can use to stream that particular movie or show. Watch Via appears if you have not downloaded the necessary video streaming app. To the right of Watch Via is a listing of the video streaming apps you can use to stream the movie or show. Select an app icon to download and install the app.
Network Services The Option Menu 2. Select Change View, and then press the OK button. If the current view is Most Played, you will be asked if you want to change to Custom View. If the current view is Custom View, you will be asked if you want to change the view to Most Played. Most Played sorts the apps by the number of times you ran each app. Custom View lets you arrange the apps to your liking. 3. Select OK, and then press the OK button to change the view.
3. 4. The Update Apps screens lists all the apps that have updates available. Select each app you want to update, and then press the OK button. You can also choose Select All to update all the apps listed. 2. On the SAMSUNG APPS screen, select WebBrowser, and then press the OK button.
Network Services The Control Panel at a Glance Using the Keyboard Pop-up The Control Panel, which runs across the top of the screen, has a series of icons which start a number of useful functions. The icons are described below, starting with the icon on the far left of the screen. When you click the http://www.samsung.com , the or access a data or text entry field, and then press the OK button, the keyboard pop-up appears. To use the keyboard pop-up with your remote, follow these steps: http://www.
Options on the Keyboard Pop-Up Enable/Disable Grabbing To access the keyboard pop-up options, highlight the button on the bottom left of the keyboard, and then press the OK button. Language Select the language for the keyboard. You can select English, French, Russian, etc. Turns the Grabber function on and off. When the Grabber function is on, you can move a web page up and down without dragging the scroll bar. The Grabber function is only available in Pointer Browsing.
Network Services Web Browser Setting Set as homepage : You can set the Browser's home page. Pop-up Block : Turns the Pop-up Block on and off. Page Block : You can determine whether to block advertisements and select the URLs for which advertisements are blocked. General : You can delete personal information such as website history and browsing data (cookies, etc.), and reset all web browser settings to their factory defaults. You can also set the Security Mode.
Appendix Additional Information Digital Output Notes Connections HDMI OUT • Certain HDMI output resolutions may not work, depending on your TV. • You must have an HDMI connection to enjoy videos with 3D technology. • A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu. Settings 3D Settings TV Aspect Ratio • Depending on the disc type, some aspect ratios may not be available.
Appendix Speaker Settings Playing JPEG files • When Sound Output is set to TV Speaker, audio is produced by the TV speakers. • You can’t enlarge the subtitle and PG graphics in the full screen mode. Playing Content HDMI audio • When HDMI audio is output to the TV speakers, it is automatically down-mixed to 2 channels.
✎ ✎ ✎ ✎ ✎ ✎ The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions. If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable. Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps. Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30 Mbps.
Appendix 1 The U.S., U.S. territories and Canada 2 Europe, Japan, the Middle East, Egypt, Africa, Greenland 3 Taiwan, Korea, the Philippines, Indonesia, Hong Kong 4 Mexico, South America, Central America, Australia, New Zealand, Pacific Islands, Caribbean 5 Russia, Eastern Europe, India, North Korea, Mongolia 6 China ✎ ✎ “x.v.Color” offers a wider color range than normal DVD camcorder discs. Some MKV and MP4 format discs may not play, depending on their video resolution and frame rate.
Video File Support File Extension Container *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv *.vob *.svi *.m2ts *.mts *.divx *.ps AVI MKV ASF MP4 3GP MOV FLV VRO VOB PS TS SVAF *.webm *.rmvb Video Codec Resolution MVC Frame rate (fps) Bitrate (Mbps) 24/25/30 60 Audio Codec Motion JPEG H.264 BP/MP/HP Divx 3.
Appendix Music File Support File Extension Type Codec Comments *.mp3 MPEG MPEG1 Audio Layer 3 - *.m4a *.mpa *.aac MPEG4 AAC - *.flac FLAC FLAC Supports up to 2ch *.ogg OGG Vorbis Supports up to 2ch *.wma WMA WMA Supports WMA 10 Pro (Up to 5.1) Does not support WMA lossless audio Supports up to M2 profile *.wav wav wav - *.mid *.midi midi midi type 0 and type 1 Seek not supported Supported on USB only *.ape ape ape NonSmart not supported *.aif *.aiff AIFF AIFF - *.
Digital Output Selections Setup PCM Connection Audio Stream on Blu-ray Disc Bitstream (Unprocessed) Up to PCM 7.1ch PCM Dolby Digital Up to PCM 5.1ch Dolby Digital Dolby Digital Plus Dolby Digital Plus Dolby TrueHD Dolby TrueHD DTS DTS PCM 2ch Up to PCM 5.1ch Dolby Digital DTS Up to PCM 7.
Appendix Resolution according to the output mode Blu-ray Disc/E-contents/Digital Contents playback HDMI Mode Output Setup BD Wise ✎ ✎ ✎ ✎ ✎ DVD playback E-contents/ Digital contents HDMI Mode Blu-ray Disc Resolution of Blu-ray Disc 1080p@60F 480i Auto Max. Resolution of TV input Max.
Troubleshooting Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG. Symptom Check/Remedy • Is the power cord plugged securely into the outlet? • Turn off the power, and then turn it back on. Playback does not start. • Check the region number of the Blu-ray/DVD disc.
Appendix Symptom Check/Remedy The menu screen does not appear even when you select the menu function. • Are you using a disc that does not contain menus? The aspect ratio cannot be changed. • You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 mode only. Refer to the Blu-ray Disc jacket, and then select the appropriate function. • The product is not working.
Symptom Check/Remedy AllShare function You can see folders shared through AllShare, but cannot see the files. • AllShare only shows Video, Photo, and Music files. Other types of files are not displayed. Video plays intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is overloaded. • The wireless connection between the DLNA compatible device and the product is unstable. Check the connection.
Appendix Specifications Weight 5.1 Ibs Dimensions 16.9 (W) x 2.2 (H) x 9.9 (D) inches Operating Temperature Range +41°F to +95°F Operating Humidity Range 10 % to 75 % Signal/noise ratio 55 dB Usable sensitivity 12 dB Total harmonic distortion 0.
HT-H6500WM Speaker system Impedance Frequency Output sound Rated range pressure level input Front Surround 3 Center 140Hz~ 20kHz 40Hz ~ 160Hz Subwoofer 87dB/W/M 88dB/W/M Dimensions (W x H x D) (inches) Weights (Ibs) 3.7 x 11.0 x 4.0 3.85 3.7 x 5.9 x 4.0 1.41 12.6 x 3.2 x 4.0 2.25 6.6 x 13.8 x 11.4 7.52 Maximum input Dimensions (W x H x D) (inches) Weights (Ibs) 330W 3.7 x 45.3 x 4.0 (Stand base: 10.8 x 0.9 x 10.4) 10.36 3.7 x 5.9 x 4.0 1.41 12.6 x 3.2 x 4.0 2.25 6.6 x 13.
Appendix Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, DTS and the Symbol together, & DTS-HD and the Symbol together are registered trademarks of DTS, Inc. DTS-HD Master Audio | Essential and DTS Neo:Fusion II are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT IN THE US 1-800-SAMSUNG (726-7864) www .sa msu ng .com/us/ support © 2014 Samsung Electronics Co., Ltd. All rights reserved. WRITE Samsung Electronics America, Inc.
This Nanum Gothic Eco font is provided by NAVER. 1 11111 11 11 111111111111111111111111111 1111111 AH68-026748-00 Accessories - - - - - -- - -- == = Check for the supplied accessones below. I! 000000 G .. -, D I 2 .:. ~ ....... . .... II . ~ ~ A.!,.£.!. Power Cable (3903-000598) FM Antenna (AH42-00021 A) (For Power cord) Toroidal Ferrite Core (3301-000144) ~ User Manual (AH68-02 684A) Soft Cloth (BN63-02368B) Main Unit liflJ Q (!.) + -£i EID CI!:.
Connecting the speakers Speaker Placement The speakers, speaker cables, and speaker jacks are color coded and must match. Front (R) Match each speaker cable p,ug to the correct speaker jack on the back of the home theater main unit by color, and then insert the plug. * Surround speakers must be connected to the wireless receiver module. * The appearance of your speakers may differ from the illustrations in this guide. * Each speaker has a colored label on its back or underside.
3 Connecting the Main Unit -----~=- ( o~:o) ~-~ J External Devices @ ® OPTICAL OUT AUDIO OUT HDMIOUT HDMIIN Connecting to a TV - - - - - - - - - - - - - - - - - - - - - - Connect an HDMI cable (not supplied) frorr the HDMI OUT jack on the back of the product to the HDMIIN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with only this cable connected.
Lf. Network Connections --~-----===== You can connect your product to your network router us1ng one of the methods illustrated below. Wireless Network Win!d Network [ (( 5 1 _.J ' I Using ---------~====== Connect the power cable to the main unit. Plug in the main unit and the wireless receiver module. r 3 m - Turn on the TV. Turn on the TV with the TV's remote control. 4 2 Insert batteries into tlhe remote control.
IMPORTANT: Player Update Information II II As new movie titles are released, they may contain enhanced features or software that is not yet compatible with this player. Should you experience playback issues with a disc, a software upgrade may resolve it. To enhance this unit's Blu-ray playback capabilities and to enjoy all the latest features that Blu-ray has to offer, you should ensure that your player's running the latest software. A quick update can make a huge difference.
--m- f--- - ----- ~-;a;-~-~~-~~w-~- :--------- n.a; ;,i~-.;e-t""t; t.19.;91is~: ;;;;i;.-.;; ~~; ;i ;~~; ~~~-..- : A ~ ~1 ~:!§ ~21 ~.X ~I Oi ~ .Xi~ ~~IL,.tQ. tt1£AI A while matalbltlon. : aa ~---~~ S!!?7 Ol§a-tof H4~e.~~-!1....~:: aa Makesuretobrushofflhedlrtorut~proo.idedc!othbeforedearnngdleablnetFor~ttle: 1 ~aOf "'"*~!19QL ..:.:'-' XUlC"> ~~o ..., .!_-r""'~at..... ,,,l r 1 ~ ~-1"1 ..YI.71 :,;..: .A ~ ·c:n~~-r- 0~ lr-L 1 English frontcablnet.
N(TFliX TV shows & movies over the Internet for only $7.
Connect. Watch. Smile. Watching Netflix on your Samsung Home Theater System is easy: simply navigate to the Netflix app and connect your account. Not a member? Try us FREE for a month. Start your FREE trial ~ Go to: netflix.com/samsung13 or select the Netfl1x app on your new Samsung product.
