Use and Care Manual

26 - English
Appendix
Additional Information
Notes
Connections
HDMI OUT
●
Certain HDMI output resolutions may not work,
depending on your TV.
●
A long HDMI cable may cause screen noise. If this
occurs, set HDMI Deep Color to Off in the menu.
Settings
TV Aspect Ratio
●
Depending on the disc type, some aspect ratios
may not be available.
●
If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
●
If you select 16:9 Original, your TV may display 4:3
Pillarbox (black bars on the sides of the picture).
BD Wise (Samsung Products only)
●
When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
●
If the product is connected to a device that does
not support BD Wise, you cannot use the BD Wise
function.
●
For proper operation of BD Wise, set the BD Wise
option in both the product and the TV to On.
Digital Output
●
Be sure to select the correct Digital Output or you
will hear no sound or just loud noise.
●
If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
●
Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
●
Some Blu-ray Discs do not have BONUSVIEW audio
and Navigation Sound Effects.
●
This Digital Output setup does not affect the
analog (L/R) audio or HDMI audio output to your
TV. It affects the optical and HDMI audio output
when your product is connected to an AV receiver.
●
If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
●
Digital Output can be activated when Speaker
Selection is set to TV Speaker.
Anynet+ (HDMI-CEC)
●
Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
●
This function is not available if the HDMI cable
does not support CEC.
●
If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
BD Data Management
●
In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
●
Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
the USB 2.0 protocol with 4 MB/sec or faster
read/write speeds.
●
The Resume Play function may not work after you
format the storage device.
●
The total memory available to BD Data
Management may differ, depending on conditions.
Speaker Settings
●
When Speaker Selection is set to TV Speaker, audio
is produced by the TV speakers.
HDMI audio
●
When HDMI audio is output to the TV speakers, it
is automatically down-mixed to 2 channels.
Audio Return Channel
●
When Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.
●
Using an HDMI cable not certified for ARC (Audio
Return Channel) may cause a compatibility
problem.
●
The ARC function is only available if an ARC-
compliant TV is connected.
Playback
Playing Video files
●
Video files with high bitrates of 20Mbps or more
strain the product’s capabilities and may stop
playing during playback.