User manual
- English
Settings
✎
:
;
;
;
;
;
:
;
;
;
;
;
;
;
: You can
enjoy sound through a remote speaker that is
connected to the home cinema through your
home network. To use the network speaker,
select . If there is a network speaker
available, it will appear on the screen.
-
: The network speaker is not
used.
-
: The network speaker outputs
audio. All network speakers output the
same audio regardless of channel using the
PCM format only.
✎
and are not
applied if
is set to on.
✎
The network speaker is not available when
is active.
✎
For further details, refer to the Multiroom
Link manual from the web site.
www.samsung.com > Support > Search
for the product name > Multiroom Link >
Download PDF
Sound Customiser lets you calibrate the home
cinema for the optimal sound quality based on
your hearing level and the ambient conditions.
To create a , follow these
steps:
In the Menu, select
.
On the next screen, select . The
screen appears.
Select to preview the Test
Sound. Select , and then press to
continue.
A 6-step test will start. During each stage,
the TV will sound a test tone at a different
frequency. The tone will begin softly and
increase in volume. Select when you
can hear the test tone. If you want to
listen to it again, select . Each time
you select , the TV will move on to the
next tone. Once the test is complete, a
screen appears that lets you compare the
original sound to the calibrated sound.
Select , and then press the button
to continue. The on-screen keyboard
appears with a default profile name.
Enter a name for the calibrated sound
profile or accept the default name, select
, and then press the button.
Select on the next screen, and
then press the button. The
screen reappears.
: Select a Sound Profile
you created to activate it. Or select
, a especially
composed of large sounds for those with
hearing disorders.
✎
If there are more than 3 Custom Sounds
registered, mode will be activated
which is composed of the average value of
all registered profiles.
: Create and add a new
. See the instructions
above.
: Choose a
to modify it. Follow the same steps
you used when creating a sound profile. This
function is only available if you have added
a using
. (See above.)
: Rename or delete
Custom Sound Profiles. This function is only
available if you have added a
using . To select a
profile, highlight the check box to the right of
the profile, and then select or .
Lets you configure the settings
manually.