User manual

 - English


Lets you adjust the output of the product to
the screen size of your TV. (See page 51)

 is Samsung’s latest inter-connectivity
feature. When you connect a Samsung product
and a Samsung TV with  to each
other via HDMI, and  is on in both the
product and TV, the product outputs video at
the video resolution and frame rate of the Blu-
ray/DVD Disc.

Lets you set the output resolution of the HDMI
video signal to , ,,,
,. The number indicates the
number of lines of video per frame. The i and
p indicate interlaced and progressive scan,
respectively.
The more lines, the higher quality.

Setting the  feature to
 lets the product adjust its HDMI output
to 24 frames per second automatically for
improved picture quality if attached to a 24 fps
compatible TV.

You can enjoy the 
feature only on a TV supporting this frame
rate.

Movie Frame is only available when the
product is in the HDMI 1080p output
resolution modes.

Converts DVD playback to 24 frames per
second and outputs it via HDMI. This option is
only available when  is set
to .
✎
This feature applies to NTSC discs only.

Lets you select the optimal size for the Smart
Hub or  Screen.

Lets you set the colour space format for the
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).

Lets you set the product to output video
from the HDMI OUT jack with Deep Colour.
Deep Colour provides more accurate colour
reproduction with greater colour depth.

Lets you improve picture quality when viewing
DVDs.


Lets you configure the settings of the speakers
you have connected to obtain the best possible
surround sound.


: Select if you have set up your
speakers in the recommended speaker layout
with the surround speakers next to or behind
the listening positions.


: Select if you have put your
surround speakers in front of the listening
position. Downmixes the front sound to the
surround sound speakers.
✎
SFE, Virtual 7.1 will not operate when the
 is on.



: Lets you select which speakers
are active, either the TV's speakers or the home
cinema's speakers.


: Lets you
adjust the following speaker settings and turn
the test tone on and off so you can test the
speakers.
-
 : Lets you adjust the relative
loudness of each speaker from 6dB to
-6dB. For example, if you like deep bass,
you can increase the loudness of the
subwoofer by 6dB.
-

: Lets you adjust the relative
distance of each speaker from the listening
position up to 9 meters . The farther the
distance, the louder the speaker will be.
-

: Begins a test to set the best
surround sound configuration. Press 
 to stop the test while it is in progress.